diff mbox series

scsi: megaraid: disable device when probe failed after enabled device

Message ID 1567733539-171304-1-git-send-email-chenxiang66@hisilicon.com (mailing list archive)
State Superseded
Headers show
Series scsi: megaraid: disable device when probe failed after enabled device | expand

Commit Message

chenxiang Sept. 6, 2019, 1:32 a.m. UTC 
From: Xiang Chen <chenxiang66@hisilicon.com>

For pci device, need to disable device when probe failed after enabled
device.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/megaraid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 45a6604..ff6d4aa 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4183,11 +4183,11 @@  megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		 */
 		if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
 		    pdev->subsystem_device == 0xC000)
-		   	return -ENODEV;
+			goto out_disable_device;
 		/* Now check the magic signature byte */
 		pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
 		if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
-			return -ENODEV;
+			goto out_disable_device;
 		/* Ok it is probably a megaraid */
 	}