| Message ID | 1594764485-682-1-git-send-email-loberman@redhat.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [net] qed: Disable "MFW indication via attention" SPAM every 5 minutes | expand |
From: Laurence Oberman <loberman@redhat.com> Date: Tue, 14 Jul 2020 18:08:05 -0400 > This is likely firmware causing this but its starting to annoy customers. > Change the message level to verbose to prevent the spam. > Note that this seems to only show up with ISCSI enabled on the HBA via the > qedi driver. > > Signed-off-by: Laurence Oberman <loberman@redhat.com> Applied, thanks.
> ---------------------------------------------------------------------- > This is likely firmware causing this but its starting to annoy customers. > Change the message level to verbose to prevent the spam. > Note that this seems to only show up with ISCSI enabled on the HBA via the > > qedi driver. > > Signed-off-by: Laurence Oberman <loberman@redhat.com> Thanks for handling this, Laurence, we actually had the same fix in out of tree driver recently, just missed upstreaming it. Acked-by: Igor Russkikh <irusskikh@marvell.com>
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index b7b974f..d853eb9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn) index, attn_bits, attn_acks, asserted_bits, deasserted_bits, p_sb_attn_sw->known_attn); } else if (asserted_bits == 0x100) { - DP_INFO(p_hwfn, "MFW indication via attention\n"); + DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, + "MFW indication via attention\n"); } else { DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, "MFW indication [deassertion]\n");
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver. Signed-off-by: Laurence Oberman <loberman@redhat.com> --- drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)