diff mbox series

[1/1] scsi: storvsc: Log TEST_UNIT_READY errors as warnings

Message ID 1628269970-87876-1-git-send-email-mikelley@microsoft.com (mailing list archive)
State Accepted
Headers show
Series [1/1] scsi: storvsc: Log TEST_UNIT_READY errors as warnings | expand

Commit Message

Michael Kelley (LINUX) Aug. 6, 2021, 5:12 p.m. UTC
Commit 08f76547f08d ("scsi: storvsc: Update error logging")
added more robust logging of errors, particularly those reported
as Hyper-V errors. But this change produces extra logging noise
in that TEST_UNIT_READY may report errors during the normal
course of detecting device adds and removes.

Fix this by logging TEST_UNIT_READY errors as warnings, so that
log lines are produced only if the storvsc log level is changed
to WARN level on the kernel boot line.

Fixes: 08f76547f08d ("scsi: storvsc: Update error logging")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
 drivers/scsi/storvsc_drv.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

Comments

Martin K. Petersen Aug. 10, 2021, 5:17 a.m. UTC | #1
On Fri, 6 Aug 2021 10:12:50 -0700, Michael Kelley wrote:

> Commit 08f76547f08d ("scsi: storvsc: Update error logging")
> added more robust logging of errors, particularly those reported
> as Hyper-V errors. But this change produces extra logging noise
> in that TEST_UNIT_READY may report errors during the normal
> course of detecting device adds and removes.
> 
> Fix this by logging TEST_UNIT_READY errors as warnings, so that
> log lines are produced only if the storvsc log level is changed
> to WARN level on the kernel boot line.
> 
> [...]

Applied to 5.14/scsi-fixes, thanks!

[1/1] scsi: storvsc: Log TEST_UNIT_READY errors as warnings
      https://git.kernel.org/mkp/scsi/c/dbe7633c394b
diff mbox series

Patch

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 328bb96..37506b3 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1199,14 +1199,24 @@  static void storvsc_on_io_completion(struct storvsc_device *stor_device,
 		vstor_packet->vm_srb.sense_info_length);
 
 	if (vstor_packet->vm_srb.scsi_status != 0 ||
-	    vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS)
-		storvsc_log(device, STORVSC_LOGGING_ERROR,
+	    vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS) {
+
+		/*
+		 * Log TEST_UNIT_READY errors only as warnings. Hyper-V can
+		 * return errors when detecting devices using TEST_UNIT_READY,
+		 * and logging these as errors produces unhelpful noise.
+		 */
+		int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ?
+			STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR;
+
+		storvsc_log(device, loglevel,
 			"tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n",
 			request->cmd->request->tag,
 			stor_pkt->vm_srb.cdb[0],
 			vstor_packet->vm_srb.scsi_status,
 			vstor_packet->vm_srb.srb_status,
 			vstor_packet->status);
+	}
 
 	if (vstor_packet->vm_srb.scsi_status == SAM_STAT_CHECK_CONDITION &&
 	    (vstor_packet->vm_srb.srb_status & SRB_STATUS_AUTOSENSE_VALID))