[v2] scsi: ufs: clear doorbell for hibern8 errors when using ah8

Commit Message

Kiwoong Kim Oct. 8, 2021, 3:15 a.m. UTC

Changes from v1:
* Change the time to requeue pended commands

When an scsi command is dispatched right after host complete
all the pended requests and ufs driver tries to ring a doorbell,
host might be still during entering into hibern8.
If the hibern8 error occurrs during that period, the doorbell
might not be zero and clearing it should have done.
But, current ufshcd_err_handler goes directly to reset
w/o clearing the doorbell when the driver's link state is broken.
This patch is to requeue pended commands after host reset.

Here's an actual symptom that I've faced. At the time, tag #17
is still pended even after host reset. And then the block timer
is expired.

exynos-ufs 11100000.ufs: ufshcd_check_errors: Auto Hibern8
Enter failed - status: 0x00000040, upmcrs: 0x00000001
..
host_regs: 00000050: b8671000 00000008 00020000 00000000
..
exynos-ufs 11100000.ufs: ufshcd_abort: Device abort task at tag 17

Signed-off-by: Kiwoong Kim <[e-mail]>
---
 drivers/scsi/ufs/ufshcd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 9faf02c..e5d4ef7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7136,8 +7136,10 @@  static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 	err = ufshcd_hba_enable(hba);
 
 	/* Establish the link again and restore the device */
-	if (!err)
+	if (!err) {
+		ufshcd_retry_aborted_requests(hba);
 		err = ufshcd_probe_hba(hba, false);
+	}
 
 	if (err)
 		dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err);