diff mbox series

[3/3] scsi: hisi_sas: Fix warnings detected by sparse

Message ID 1684118481-95908-4-git-send-email-chenxiang66@hisilicon.com (mailing list archive)
State Accepted
Headers show
Series scsi: hisi_sas: Some misc changes | expand

Commit Message

chenxiang May 15, 2023, 2:41 a.m. UTC 
From: Xingui Yang <yangxingui@huawei.com>

This patch fixes the following warning:
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:2168:43: sparse: sparse: restricted __le32 degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304161254.NztCVZIO-lkp@intel.com/
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 3d1869c..20e1607 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2216,6 +2216,7 @@  slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	u32 trans_tx_fail_type = le32_to_cpu(record->trans_tx_fail_type);
 	u16 sipc_rx_err_type = le16_to_cpu(record->sipc_rx_err_type);
 	u32 dw3 = le32_to_cpu(complete_hdr->dw3);
+	u32 dw0 = le32_to_cpu(complete_hdr->dw0);
 
 	switch (task->task_proto) {
 	case SAS_PROTOCOL_SSP:
@@ -2225,8 +2226,8 @@  slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 			 * but I/O information has been written to the host memory, we examine
 			 * response IU.
 			 */
-			if (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_GOOD_MSK) &&
-				(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))
+			if (!(dw0 & CMPLT_HDR_RSPNS_GOOD_MSK) &&
+			    (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))
 				return false;
 
 			ts->residual = trans_tx_fail_type;
@@ -2242,7 +2243,7 @@  slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	case SAS_PROTOCOL_SATA:
 	case SAS_PROTOCOL_STP:
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
-		if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
+		if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
 		    (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
 			ts->stat = SAS_PROTO_RESPONSE;
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {