@@ -14,7 +14,7 @@
* | Module Init and Probe | 0x0193 | 0x0146 |
* | | | 0x015b-0x0160 |
* | | | 0x016e |
- * | Mailbox commands | 0x1199 | 0x1193 |
+ * | Mailbox commands | 0x1205 | 0x11a2-0x11ff |
* | Device Discovery | 0x2134 | 0x210e-0x2116 |
* | | | 0x211a |
* | | | 0x211c-0x2128 |
@@ -978,6 +978,7 @@ struct mbx_cmd_32 {
#define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */
#define MBC_RESET 0x18 /* Reset. */
#define MBC_GET_ADAPTER_LOOP_ID 0x20 /* Get loop id of ISP2200. */
+#define MBC_GET_SET_ZIO_THRESHOLD 0x21 /* Get/SET ZIO THRESHOLD. */
#define MBC_GET_RETRY_COUNT 0x22 /* Get f/w retry cnt/delay. */
#define MBC_DISABLE_VI 0x24 /* Disable VI operation. */
#define MBC_ENABLE_VI 0x25 /* Enable VI operation. */
@@ -4018,6 +4019,9 @@ struct qla_hw_data {
struct qlt_hw_data tgt;
int allow_cna_fw_dump;
+
+ atomic_t nvme_active_aen_cnt;
+ uint16_t nvme_last_rptd_aen; /* Last recorded aen count */
};
/*
@@ -4090,6 +4094,7 @@ typedef struct scsi_qla_host {
#define FX00_CRITEMP_RECOVERY 25
#define FX00_HOST_INFO_RESEND 26
#define QPAIR_ONLINE_CHECK_NEEDED 27
+#define SET_ZIO_THRESHOLD_NEEDED 28
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
@@ -484,6 +484,9 @@ int qla24xx_gidlist_wait(struct scsi_qla_host *, void *, dma_addr_t,
int __qla24xx_parse_gpdb(struct scsi_qla_host *, fc_port_t *,
struct port_database_24xx *);
+extern int qla27xx_get_zio_threshold(scsi_qla_host_t *, uint16_t *);
+extern int qla27xx_set_zio_threshold(scsi_qla_host_t *, uint16_t );
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -1823,7 +1823,7 @@ qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
nvme = &sp->u.iocb_cmd;
if (unlikely(nvme->u.nvme.aen_op))
- atomic_dec(&sp->vha->nvme_active_aen_cnt);
+ atomic_dec(&sp->vha->hw->nvme_active_aen_cnt);
/*
* State flags: Bit 6 and 0.
@@ -947,20 +947,12 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha)
"%s: Firmware supports Exchange Offload 0x%x\n",
__func__, ha->fw_attributes_h);
- /* bit 26 of fw_attributes */
- if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable) {
- struct init_cb_24xx *icb;
-
- icb = (struct init_cb_24xx *)ha->init_cb;
- /*
- * fw supports nvme and driver load
- * parameter requested nvme
- */
+ /*
+ * fw supports nvme and driver load parameter requested nvme
+ * bit 26 of fw_attributes indicates NVMe support
+ */
+ if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable)
vha->flags.nvme_enabled = 1;
- icb->firmware_options_2 &= cpu_to_le32(~0xf);
- ha->zio_mode = 0;
- ha->zio_timer = 0;
- }
}
@@ -6085,3 +6077,61 @@ int qla24xx_gidlist_wait(struct scsi_qla_host *vha,
done:
return rval;
}
+
+int qla27xx_set_zio_threshold(scsi_qla_host_t *vha, uint16_t value)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1200,
+ "Entered %s\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_SET_ZIO_THRESHOLD;
+ mcp->mb[1] = cpu_to_le16(1);
+ mcp->mb[2] = cpu_to_le16(value);
+ mcp->out_mb = MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1201, "Failed=%x.\n", rval);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1202,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
+int qla27xx_get_zio_threshold(scsi_qla_host_t *vha, uint16_t *value)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1203,
+ "Entered %s\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_SET_ZIO_THRESHOLD;
+ mcp->mb[1] = cpu_to_le16(0);
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1204, "Failed=%x.\n", rval);
+ } else {
+ *value = mc.mb[2];
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1205,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
@@ -322,6 +322,7 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
uint16_t avail_dsds;
uint32_t *cur_dsd;
struct req_que *req = NULL;
+ struct rsp_que *rsp = NULL;
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct qla_qpair *qpair = sp->qpair;
@@ -330,13 +331,15 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
uint32_t rval = QLA_SUCCESS;
- /* Setup qpair pointers */
- req = qpair->req;
tot_dsds = fd->sg_cnt;
/* Acquire qpair specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
+ /* Setup qpair pointers */
+ req = qpair->req;
+ rsp = qpair->rsp;
+
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
@@ -371,7 +374,7 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
struct nvme_fc_cmd_iu *cmd = fd->cmdaddr;
if (cmd->sqe.common.opcode == nvme_admin_async_event) {
nvme->u.nvme.aen_op = 1;
- atomic_inc(&vha->nvme_active_aen_cnt);
+ atomic_inc(&vha->hw->nvme_active_aen_cnt);
}
}
@@ -484,6 +487,11 @@ static int qla2x00_start_nvme_mq(srb_t *sp)
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
+ /* Manage unprocessed RIO/ZIO commands in response queue. */
+ if (vha->flags.process_response_queue &&
+ rsp->ring_ptr->signature != RESPONSE_PROCESSED)
+ qla24xx_process_response_queue(vha, rsp);
+
queuing_error:
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return rval;
@@ -2751,6 +2751,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&ha->tgt.sess_lock);
spin_lock_init(&ha->tgt.atio_lock);
+ atomic_set(&ha->nvme_active_aen_cnt, 0);
+
/* Clear our data area */
ha->bars = bars;
ha->mem_only = mem_only;
@@ -5836,6 +5838,17 @@ qla2x00_do_dpc(void *data)
mutex_unlock(&ha->mq_lock);
}
+ if (test_and_clear_bit(SET_ZIO_THRESHOLD_NEEDED, &base_vha->dpc_flags)) {
+ ql_log(ql_log_info, base_vha, 0xffffff,
+ "nvme: SET ZIO Activity exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ if (qla27xx_set_zio_threshold(base_vha, ha->nvme_last_rptd_aen)) {
+ ql_log(ql_log_info, base_vha, 0xffffff,
+ "nvme: Unable to SET ZIO Activity exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ }
+ }
+
if (!IS_QLAFX00(ha))
qla2x00_do_dpc_all_vps(base_vha);
@@ -6033,12 +6046,15 @@ qla2x00_timer(scsi_qla_host_t *vha)
* FC-NVME
* see if the active AEN count has changed from what was last reported.
*/
- if (atomic_read(&vha->nvme_active_aen_cnt) != vha->nvme_last_rptd_aen) {
- vha->nvme_last_rptd_aen =
- atomic_read(&vha->nvme_active_aen_cnt);
+ if (!vha->vp_idx &&
+ atomic_read(&ha->nvme_active_aen_cnt) != ha->nvme_last_rptd_aen &&
+ ha->zio_mode == QLA_ZIO_MODE_6) {
ql_log(ql_log_info, vha, 0x3002,
- "reporting new aen count of %d to the fw\n",
- vha->nvme_last_rptd_aen);
+ "nvme: Sched: Set ZIO exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ ha->nvme_last_rptd_aen = atomic_read(&ha->nvme_active_aen_cnt);
+ set_bit(SET_ZIO_THRESHOLD_NEEDED, &vha->dpc_flags);
+ start_dpc++;
}
/* Schedule the DPC routine if needed */