@@ -373,6 +373,7 @@ void blk_clear_preempt_only(struct request_queue *q)
spin_lock_irqsave(q->queue_lock, flags);
queue_flag_clear(QUEUE_FLAG_PREEMPT_ONLY, q);
+ wake_up_all(&q->mq_freeze_wq);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL_GPL(blk_clear_preempt_only);
@@ -794,15 +795,41 @@ struct request_queue *blk_alloc_queue(gfp_t gfp_mask)
}
EXPORT_SYMBOL(blk_alloc_queue);
-int blk_queue_enter(struct request_queue *q, bool nowait)
+/**
+ * blk_queue_enter() - try to increase q->q_usage_counter
+ * @q: request queue pointer
+ * @flags: BLK_MQ_REQ_NOWAIT and/or BLK_MQ_REQ_PREEMPT
+ */
+int blk_queue_enter(struct request_queue *q, unsigned int flags)
{
+ const bool preempt = flags & BLK_MQ_REQ_PREEMPT;
+
while (true) {
+ bool success = false;
int ret;
- if (percpu_ref_tryget_live(&q->q_usage_counter))
+ rcu_read_lock_sched();
+ if (percpu_ref_tryget_live(&q->q_usage_counter)) {
+ /*
+ * The code that sets the PREEMPT_ONLY flag is
+ * responsible for ensuring that that flag is globally
+ * visible before the queue is unfrozen.
+ */
+ if (preempt || !blk_queue_preempt_only(q)) {
+ success = true;
+ } else {
+ percpu_ref_put(&q->q_usage_counter);
+ WARN_ONCE(true,
+ "%s: Attempt to allocate non-preempt request in preempt-only mode.\n",
+ kobject_name(q->kobj.parent));
+ }
+ }
+ rcu_read_unlock_sched();
+
+ if (success)
return 0;
- if (nowait)
+ if (flags & BLK_MQ_REQ_NOWAIT)
return -EBUSY;
/*
@@ -815,7 +842,8 @@ int blk_queue_enter(struct request_queue *q, bool nowait)
smp_rmb();
ret = wait_event_interruptible(q->mq_freeze_wq,
- !atomic_read(&q->mq_freeze_depth) ||
+ (atomic_read(&q->mq_freeze_depth) == 0 &&
+ (preempt || !blk_queue_preempt_only(q))) ||
blk_queue_dying(q));
if (blk_queue_dying(q))
return -ENODEV;
@@ -1444,8 +1472,7 @@ static struct request *blk_old_get_request(struct request_queue *q,
/* create ioc upfront */
create_io_context(gfp_mask, q->node);
- ret = blk_queue_enter(q, !(gfp_mask & __GFP_DIRECT_RECLAIM) ||
- (op & REQ_NOWAIT));
+ ret = blk_queue_enter(q, flags);
if (ret)
return ERR_PTR(ret);
spin_lock_irq(q->queue_lock);
@@ -2266,8 +2293,10 @@ blk_qc_t generic_make_request(struct bio *bio)
current->bio_list = bio_list_on_stack;
do {
struct request_queue *q = bio->bi_disk->queue;
+ unsigned int flags = bio->bi_opf & REQ_NOWAIT ?
+ BLK_MQ_REQ_NOWAIT : 0;
- if (likely(blk_queue_enter(q, bio->bi_opf & REQ_NOWAIT) == 0)) {
+ if (likely(blk_queue_enter(q, flags) == 0)) {
struct bio_list lower, same;
/* Create a fresh bio_list for all subordinate requests */
@@ -386,7 +386,7 @@ struct request *blk_mq_alloc_request(struct request_queue *q, unsigned int op,
struct request *rq;
int ret;
- ret = blk_queue_enter(q, flags & BLK_MQ_REQ_NOWAIT);
+ ret = blk_queue_enter(q, flags);
if (ret)
return ERR_PTR(ret);
@@ -425,7 +425,7 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
if (hctx_idx >= q->nr_hw_queues)
return ERR_PTR(-EIO);
- ret = blk_queue_enter(q, true);
+ ret = blk_queue_enter(q, flags);
if (ret)
return ERR_PTR(ret);
@@ -2955,21 +2955,37 @@ static void scsi_wait_for_queuecommand(struct scsi_device *sdev)
int
scsi_device_quiesce(struct scsi_device *sdev)
{
+ struct request_queue *q = sdev->request_queue;
int err;
+ /*
+ * It is allowed to call scsi_device_quiesce() multiple times from
+ * the same context but concurrent scsi_device_quiesce() calls are
+ * not allowed.
+ */
+ WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current);
+
+ blk_set_preempt_only(q);
+
+ blk_mq_freeze_queue(q);
+ /*
+ * Ensure that the effect of blk_set_preempt_only() will be visible
+ * for percpu_ref_tryget() callers that occur after the queue
+ * unfreeze even if the queue was already frozen before this function
+ * was called. See also https://lwn.net/Articles/573497/.
+ */
+ synchronize_rcu();
+ blk_mq_unfreeze_queue(q);
+
mutex_lock(&sdev->state_mutex);
err = scsi_device_set_state(sdev, SDEV_QUIESCE);
+ if (err == 0)
+ sdev->quiesced_by = current;
+ else
+ blk_clear_preempt_only(q);
mutex_unlock(&sdev->state_mutex);
- if (err)
- return err;
-
- scsi_run_queue(sdev->request_queue);
- while (atomic_read(&sdev->device_busy)) {
- msleep_interruptible(200);
- scsi_run_queue(sdev->request_queue);
- }
- return 0;
+ return err;
}
EXPORT_SYMBOL(scsi_device_quiesce);
@@ -2989,9 +3005,11 @@ void scsi_device_resume(struct scsi_device *sdev)
* device deleted during suspend)
*/
mutex_lock(&sdev->state_mutex);
- if (sdev->sdev_state == SDEV_QUIESCE &&
- scsi_device_set_state(sdev, SDEV_RUNNING) == 0)
- scsi_run_queue(sdev->request_queue);
+ WARN_ON_ONCE(!sdev->quiesced_by);
+ sdev->quiesced_by = NULL;
+ blk_clear_preempt_only(sdev->request_queue);
+ if (sdev->sdev_state == SDEV_QUIESCE)
+ scsi_device_set_state(sdev, SDEV_RUNNING);
mutex_unlock(&sdev->state_mutex);
}
EXPORT_SYMBOL(scsi_device_resume);
@@ -662,7 +662,7 @@ int bdev_read_page(struct block_device *bdev, sector_t sector,
if (!ops->rw_page || bdev_get_integrity(bdev))
return result;
- result = blk_queue_enter(bdev->bd_queue, false);
+ result = blk_queue_enter(bdev->bd_queue, 0);
if (result)
return result;
result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, false);
@@ -698,7 +698,7 @@ int bdev_write_page(struct block_device *bdev, sector_t sector,
if (!ops->rw_page || bdev_get_integrity(bdev))
return -EOPNOTSUPP;
- result = blk_queue_enter(bdev->bd_queue, false);
+ result = blk_queue_enter(bdev->bd_queue, 0);
if (result)
return result;
@@ -956,7 +956,7 @@ extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
struct scsi_ioctl_command __user *);
-extern int blk_queue_enter(struct request_queue *q, bool nowait);
+extern int blk_queue_enter(struct request_queue *q, unsigned int flags);
extern void blk_queue_exit(struct request_queue *q);
extern void blk_start_queue(struct request_queue *q);
extern void blk_start_queue_async(struct request_queue *q);
@@ -219,6 +219,7 @@ struct scsi_device {
unsigned char access_state;
struct mutex state_mutex;
enum scsi_device_state sdev_state;
+ struct task_struct *quiesced_by;
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> --- block/blk-core.c | 43 ++++++++++++++++++++++++++++++++++++------- block/blk-mq.c | 4 ++-- drivers/scsi/scsi_lib.c | 42 ++++++++++++++++++++++++++++++------------ fs/block_dev.c | 4 ++-- include/linux/blkdev.h | 2 +- include/scsi/scsi_device.h | 1 + 6 files changed, 72 insertions(+), 24 deletions(-)