diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 29b0eb452b3a..bf2d464b0e2c 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -70,39 +70,64 @@ config STANDALONE
 	  If unsure, say Y.
 
 config PREVENT_FIRMWARE_BUILD
-	bool "Prevent firmware from being built"
+	bool "Disable drivers features which enable custom firmware building"
 	default y
 	help
-	  Say yes to avoid building firmware. Firmware is usually shipped
-	  with the driver and only when updating the firmware should a
-	  rebuild be made.
-	  If unsure, say Y here.
+	  Say yes to disable driver features which enable building a custom
+	  driver firmwar at kernel build time. These drivers do not use the
+	  kernel firmware API to load firmware (CONFIG_FW_LOADER), instead they
+	  use their own custom loading mechanism. The required firmware is
+	  usually shipped with the driver, building the driver firmware
+	  should only be needed if you have an updated firmware source.
+
+	  Firmware should not be being built as part of kernel, these days
+	  you should always prevent this and say Y here. There are only two
+	  old drivers which enable building of its firmware at kernel build
+	  time:
+
+	    o CONFIG_WANXL through CONFIG_WANXL_BUILD_FIRMWARE
+	    o CONFIG_SCSI_AIC79XX through CONFIG_AIC79XX_BUILD_FIRMWARE
+
+menu "Firmware loader"
 
 config FW_LOADER
-	tristate "Userspace firmware loading support" if EXPERT
+	tristate "Firmware loading facility" if EXPERT
 	default y
 	---help---
-	  This option is provided for the case where none of the in-tree modules
-	  require userspace firmware loading support, but a module built
-	  out-of-tree does.
+	  This enables the firmware loading facility in the kernel. The kernel
+	  will first look for built-in firmware, if it has any. Next, it will
+	  look for the requested firmware in a series of filesystem paths:
+
+		o firmware_class path module parameter or kernel boot param
+		o /lib/firmware/updates/UTS_RELEASE
+		o /lib/firmware/updates
+		o /lib/firmware/UTS_RELEASE
+		o /lib/firmware
+
+	  Enabling this feature only increases your kernel image by about
+	  828 bytes, enable this option unless you are certain you don't
+	  need firmware.
+
+	  You typically want this built-in (=y) but you can also enable this
+	  as a module, in which case the firmware_class module will be built.
+	  You also want to be sure to enable this built-in if you are going to
+	  enable built-in firmware (CONFIG_EXTRA_FIRMWARE).
+
+if FW_LOADER
 
 config EXTRA_FIRMWARE
-	string "External firmware blobs to build into the kernel binary"
-	depends on FW_LOADER
+	string "Build these firmware blobs into the kernel binary"
 	help
-	  Various drivers in the kernel source tree may require firmware,
-	  which is generally available in your distribution's linux-firmware
-	  package.
+	  Device drivers which require firmware can typically deal with
+	  having the kernel load firmware from the various supported
+	  /lib/firmware/ paths. This option enables you to build into the
+	  kernel firmware files. Built-in firmware searches are preceeded
+	  over firmware lookups using your filesystem over the supported
+	  /lib/firmware paths documented on CONFIG_FW_LOADER.
 
-	  The linux-firmware package should install firmware into
-	  /lib/firmware/ on your system, so they can be loaded by userspace
-	  helpers on request.
-
-	  This option allows firmware to be built into the kernel for the case
-	  where the user either cannot or doesn't want to provide it from
-	  userspace at runtime (for example, when the firmware in question is
-	  required for accessing the boot device, and the user doesn't want to
-	  use an initrd).
+	  This may be useful for testing or if the firmware is required early on
+	  in boot and cannot rely on the firmware being placed in an initrd or
+	  initramfs.
 
 	  This option is a string and takes the (space-separated) names of the
 	  firmware files -- the same names that appear in MODULE_FIRMWARE()
@@ -113,7 +138,7 @@ config EXTRA_FIRMWARE
 	  For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
 	  the usb8388.bin file into /lib/firmware, and build the kernel. Then
 	  any request_firmware("usb8388.bin") will be satisfied internally
-	  without needing to call out to userspace.
+	  inside the kernel without ever looking at your filesystem at runtime.
 
 	  WARNING: If you include additional firmware files into your binary
 	  kernel image that are not available under the terms of the GPL,
@@ -130,22 +155,89 @@ config EXTRA_FIRMWARE_DIR
 	  looks for the firmware files listed in the EXTRA_FIRMWARE option.
 
 config FW_LOADER_USER_HELPER
-	bool
+	bool "Enable the firmware sysfs fallback mechanism"
+	help
+	  This option enables a sysfs loading facility to enable firmware
+	  loading to the kernel through userspace as a fallback mechanism
+	  if and only if the kernel's direct filesystem lookup for the
+	  firmware failed using the different /lib/firmware/ paths, or the
+	  path specified in the firmware_class path module parameter, or the
+	  firmware_class path kernel boot parameter if the firmware_class is
+	  built-in. For details on how to work with the sysfs fallback mechanism
+	  refer to Documentation/driver-api/firmware/fallback-mechanisms.rst.
+
+	  The direct filesystem lookup for firwmare is always used first now.
+
+	  If the kernel's direct filesystem lookup for firware fails to find
+	  the requested firmware a sysfs fallback loading facility is made
+	  available and userspace is informed about this through uevents.
+	  The uevent can be supressed if the driver explicitly requested it,
+	  this is known as the driver using the custom fallback mechanism.
+	  If the custom fallback mechanism is used userspace must always
+	  acknowledge failure to find firmware as the timeout for the fallback
+	  mechanism is disabled, and failed requests will linger forever.
+
+	  This used to be the default firmware loading facility, and udev used
+	  listen for uvents to load firmware for the kernel. The firmware
+	  loading facility functionality in udev has been removed, as such it
+	  can no longer be relied upon as a fallback mechanism. Linux no longer
+	  relies on or uses a fallback mechanism in userspace.
+
+	  Since this was the default firmware loading facility at one point,
+	  old userspace may exist which relies upon it, and as such this
+	  mechanism can never be removed from the kernel.
+
+	  You should only enable this functionality if you are certain you
+	  require a fallback mechanism and have a userspace mechanism ready to
+	  load firmware in case it is not found. Another reason kernels may
+	  have this feature enabled is to support a driver which explicitly
+	  relies on this fallback mechanism. Only two drivers need this today:
+
+	    o CONFIG_LEDS_LP55XX_COMMON
+	    o CONFIG_DELL_RBU
+
+	  Outside of supporting the above drivers, another reason for needing
+	  this may be that your firmware resides outside of the paths the kernel
+	  looks for and cannot possibily be specified using the firmware_class
+	  path module parameter or kernel firmware_class path boot parameter
+	  if firmware_class is built-in.
+
+	  A modern use case may be to temporarily mount a custom partition
+	  during provisioning which is only accessible to userspace, and then
+	  to use it to look for and fetch the required firmware. Such type of
+	  driver functionality may not even ever be desirable upstream by
+	  vendors, and as such is only required to be supported as an interface
+	  for provisioning. Since udev's firmware loading facility has been
+	  removed you can use firmwared or a fork of it to customize how you
+	  want to load firmware based on uevents issued:
+	  https://github.com/teg/firmwared
+
+	  Enabling this option will increase your kernel image size by about
+	  13436 bytes.
+
+	  If you are unsure about this, say N here, unless you are Linux
+	  distribution and need to support the above two drivers, or you are
+	  certain you need to support some really custom firmware loading
+	  facility in userspace.
 
 config FW_LOADER_USER_HELPER_FALLBACK
-	bool "Fallback user-helper invocation for firmware loading"
-	depends on FW_LOADER
-	select FW_LOADER_USER_HELPER
+	bool "Force the firmware sysfs fallback mechanism when possible"
+	depends on FW_LOADER_USER_HELPER
 	help
-	  This option enables / disables the invocation of user-helper
-	  (e.g. udev) for loading firmware files as a fallback after the
-	  direct file loading in kernel fails.  The user-mode helper is
-	  no longer required unless you have a special firmware file that
-	  resides in a non-standard path. Moreover, the udev support has
-	  been deprecated upstream.
+	  Enabling this option forces a sysfs userspace fallback mechanism
+	  to be used for all firmware requests which explicitly do not disable a
+	  a fallback mechanism. Firmware calls which do prohibit a fallback
+	  mechanism is request_firmware_direct(). This option is kept for
+          backward compatibility purposes given this precise mechanism can also
+	  be enabled by setting the proc sysctl value to true:
+
+	       /proc/sys/kernel/firmware_config/force_sysfs_fallback
 
 	  If you are unsure about this, say N here.
 
+endif # FW_LOADER
+endmenu
+
 config WANT_DEV_COREDUMP
 	bool
 	help
