diff mbox

[v3,2/3] scsi: ufs: Use freq table with devfreq

Message ID 20180518062638.31777-3-bjorn.andersson@linaro.org (mailing list archive)
State Accepted
Headers show

Commit Message

Bjorn Andersson May 18, 2018, 6:26 a.m. UTC
devfreq requires that the client operates on actual frequencies, not
only 0 and UMAX_INT and as such UFS brok with the introduction of
f1d981eaecf8 ("PM / devfreq: Use the available min/max frequency").

This patch registers the frequencies of the first clock with devfreq and
use these to determine if we're trying to step up or down.

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> [for devfreq & OPP part]
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- Picked up R-b from Chanwoo and Subhash

Chances since v1:
- Register min_freq and max_freq as opp levels.
- Unregister opp levels on removal, to make e.g. probe defer working

 drivers/scsi/ufs/ufshcd.c | 47 +++++++++++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f04902a066cb..3d46a70ed41d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1200,16 +1200,13 @@  static int ufshcd_devfreq_target(struct device *dev,
 	struct ufs_hba *hba = dev_get_drvdata(dev);
 	ktime_t start;
 	bool scale_up, sched_clk_scaling_suspend_work = false;
+	struct list_head *clk_list = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
 	unsigned long irq_flags;
 
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
 
-	if ((*freq > 0) && (*freq < UINT_MAX)) {
-		dev_err(hba->dev, "%s: invalid freq = %lu\n", __func__, *freq);
-		return -EINVAL;
-	}
-
 	spin_lock_irqsave(hba->host->host_lock, irq_flags);
 	if (ufshcd_eh_in_progress(hba)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
@@ -1219,7 +1216,13 @@  static int ufshcd_devfreq_target(struct device *dev,
 	if (!hba->clk_scaling.active_reqs)
 		sched_clk_scaling_suspend_work = true;
 
-	scale_up = (*freq == UINT_MAX) ? true : false;
+	if (list_empty(clk_list)) {
+		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+		goto out;
+	}
+
+	clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list);
+	scale_up = (*freq == clki->max_freq) ? true : false;
 	if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) {
 		spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
 		ret = 0;
@@ -1289,16 +1292,29 @@  static struct devfreq_dev_profile ufs_devfreq_profile = {
 
 static int ufshcd_devfreq_init(struct ufs_hba *hba)
 {
+	struct list_head *clk_list = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
 	struct devfreq *devfreq;
 	int ret;
 
-	devfreq = devm_devfreq_add_device(hba->dev,
+	/* Skip devfreq if we don't have any clocks in the list */
+	if (list_empty(clk_list))
+		return 0;
+
+	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+	dev_pm_opp_add(hba->dev, clki->min_freq, 0);
+	dev_pm_opp_add(hba->dev, clki->max_freq, 0);
+
+	devfreq = devfreq_add_device(hba->dev,
 			&ufs_devfreq_profile,
 			DEVFREQ_GOV_SIMPLE_ONDEMAND,
 			NULL);
 	if (IS_ERR(devfreq)) {
 		ret = PTR_ERR(devfreq);
 		dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
+
+		dev_pm_opp_remove(hba->dev, clki->min_freq);
+		dev_pm_opp_remove(hba->dev, clki->max_freq);
 		return ret;
 	}
 
@@ -1307,6 +1323,22 @@  static int ufshcd_devfreq_init(struct ufs_hba *hba)
 	return 0;
 }
 
+static void ufshcd_devfreq_remove(struct ufs_hba *hba)
+{
+	struct list_head *clk_list = &hba->clk_list_head;
+	struct ufs_clk_info *clki;
+
+	if (!hba->devfreq)
+		return;
+
+	devfreq_remove_device(hba->devfreq);
+	hba->devfreq = NULL;
+
+	clki = list_first_entry(clk_list, struct ufs_clk_info, list);
+	dev_pm_opp_remove(hba->dev, clki->min_freq);
+	dev_pm_opp_remove(hba->dev, clki->max_freq);
+}
+
 static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba)
 {
 	unsigned long flags;
@@ -7005,6 +7037,7 @@  static void ufshcd_hba_exit(struct ufs_hba *hba)
 			if (hba->devfreq)
 				ufshcd_suspend_clkscaling(hba);
 			destroy_workqueue(hba->clk_scaling.workq);
+			ufshcd_devfreq_remove(hba);
 		}
 		ufshcd_setup_clocks(hba, false);
 		ufshcd_setup_hba_vreg(hba, false);