diff mbox

[09/12] qla2xxx: Flush mailbox commands on chip reset

Message ID 20180607051926.27940-10-himanshu.madhani@cavium.com (mailing list archive)
State Accepted
Headers show

Commit Message

Madhani, Himanshu June 7, 2018, 5:19 a.m. UTC
From: Quinn Tran <quinn.tran@cavium.com>

Flush pending mailbox commands on chip reset.  Wake up
command that's waiting for an interrupt and wait for
mailbox counters to go to zero.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h  |  4 ++++
 drivers/scsi/qla2xxx/qla_init.c | 18 ++++++++++++++++++
 drivers/scsi/qla2xxx/qla_mbx.c  | 35 +++++++++++++++++++++++++++++++++--
 drivers/scsi/qla2xxx/qla_os.c   |  3 +++
 4 files changed, 58 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ee4d1f4fdf95..9a98f1c73f5e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3598,6 +3598,7 @@  struct qla_hw_data {
 		uint32_t	detected_lr_sfp:1;
 		uint32_t	using_lr_setting:1;
 		uint32_t	rida_fmt2:1;
+		uint32_t	purge_mbox:1;
 	} flags;
 
 	uint16_t max_exchg;
@@ -3843,6 +3844,9 @@  struct qla_hw_data {
 	int		port_down_retry_count;
 	uint8_t		mbx_count;
 	uint8_t		aen_mbx_count;
+	atomic_t	num_pend_mbx_stage1;
+	atomic_t	num_pend_mbx_stage2;
+	atomic_t	num_pend_mbx_stage3;
 
 	uint32_t	login_retry_count;
 	/* SNS command interfaces. */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 78d9c96ffe78..a08502eaa789 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6390,6 +6390,7 @@  qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ql_log(ql_log_info, vha, 0x00af,
 	    "Performing ISP error recovery - ha=%p.\n", ha);
 
+	ha->flags.purge_mbox = 1;
 	/* For ISP82XX, reset_chip is just disabling interrupts.
 	 * Driver waits for the completion of the commands.
 	 * the interrupts need to be enabled.
@@ -6411,6 +6412,23 @@  qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 				ha->base_qpair->chip_reset;
 	}
 
+	/* purge MBox commands */
+	if (atomic_read(&ha->num_pend_mbx_stage3)) {
+		clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
+		complete(&ha->mbx_intr_comp);
+	}
+
+	i = 0;
+	while (atomic_read(&ha->num_pend_mbx_stage3) ||
+	    atomic_read(&ha->num_pend_mbx_stage2) ||
+	    atomic_read(&ha->num_pend_mbx_stage1)) {
+		msleep(20);
+		i++;
+		if (i > 50)
+			break;
+	}
+	ha->flags.purge_mbox = 0;
+
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
 		atomic_set(&vha->loop_state, LOOP_DOWN);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6e80c9fe71fd..4fb2ca41d7b5 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -167,6 +167,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
+	atomic_inc(&ha->num_pend_mbx_stage1);
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -177,8 +178,14 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		ql_log(ql_log_warn, vha, 0xd035,
 		    "Cmd access timeout, cmd=0x%x, Exiting.\n",
 		    mcp->mb[0]);
+		atomic_dec(&ha->num_pend_mbx_stage1);
 		return QLA_FUNCTION_TIMEOUT;
 	}
+	atomic_dec(&ha->num_pend_mbx_stage1);
+	if (ha->flags.purge_mbox) {
+		rval = QLA_ABORTED;
+		goto premature_exit;
+	}
 
 	ha->flags.mbox_busy = 1;
 	/* Save mailbox command for debug */
@@ -231,7 +238,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	    "jiffies=%lx.\n", jiffies);
 
 	/* Wait for mbx cmd completion until timeout */
-
+	atomic_inc(&ha->num_pend_mbx_stage2);
 	if ((!abort_active && io_lock_on) || IS_NOPOLLING_TYPE(ha)) {
 		set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
@@ -241,6 +248,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1010,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -254,6 +262,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 		wait_time = jiffies;
+		atomic_inc(&ha->num_pend_mbx_stage3);
 		if (!wait_for_completion_timeout(&ha->mbx_intr_comp,
 		    mcp->tov * HZ)) {
 			ql_dbg(ql_dbg_mbx, vha, 0x117a,
@@ -261,7 +270,16 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			spin_lock_irqsave(&ha->hardware_lock, flags);
 			clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 			spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		} else if (ha->flags.purge_mbox) {
+			ha->flags.mbox_busy = 0;
+			atomic_dec(&ha->num_pend_mbx_stage2);
+			atomic_dec(&ha->num_pend_mbx_stage3);
+			rval = QLA_ABORTED;
+			goto premature_exit;
 		}
+		atomic_dec(&ha->num_pend_mbx_stage3);
+
 		if (time_after(jiffies, wait_time + 5 * HZ))
 			ql_log(ql_log_warn, vha, 0x1015, "cmd=0x%x, waited %d msecs\n",
 			    command, jiffies_to_msecs(jiffies - wait_time));
@@ -275,6 +293,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1012,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -289,6 +308,13 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 		wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
 		while (!ha->flags.mbox_int) {
+			if (ha->flags.purge_mbox) {
+				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
+				rval = QLA_ABORTED;
+				goto premature_exit;
+			}
+
 			if (time_after(jiffies, wait_time))
 				break;
 
@@ -304,6 +330,7 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		    "Waited %d sec.\n",
 		    (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ));
 	}
+	atomic_dec(&ha->num_pend_mbx_stage2);
 
 	/* Check whether we timed out */
 	if (ha->flags.mbox_int) {
@@ -489,7 +516,11 @@  qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	complete(&ha->mbx_cmd_comp);
 
 mbx_done:
-	if (rval) {
+	if (rval == QLA_ABORTED) {
+		ql_log(ql_log_info, vha, 0xd035,
+		    "Chip Reset in progress. Purging Mbox cmd=0x%x.\n",
+		    mcp->mb[0]);
+	} else if (rval) {
 		if (ql2xextended_error_logging & (ql_dbg_disc|ql_dbg_mbx)) {
 			pr_warn("%s [%s]-%04x:%ld: **** Failed", QL_MSGHDR,
 			    dev_name(&ha->pdev->dev), 0x1020+0x800,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e6b65933fbbc..6bdb9cf38b77 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2815,6 +2815,9 @@  qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->link_data_rate = PORT_SPEED_UNKNOWN;
 	ha->optrom_size = OPTROM_SIZE_2300;
 	ha->max_exchg = FW_MAX_EXCHANGES_CNT;
+	atomic_set(&ha->num_pend_mbx_stage1, 0);
+	atomic_set(&ha->num_pend_mbx_stage2, 0);
+	atomic_set(&ha->num_pend_mbx_stage3, 0);
 
 	/* Assign ISP specific operations. */
 	if (IS_QLA2100(ha)) {