diff mbox series

[v5,5/5] target: perform t10_wwn ID initialisation in target_alloc_device()

Message ID 20181130233423.26556-6-ddiss@suse.de (mailing list archive)
State Superseded
Headers show
Series target: user configurable T10 Vendor ID | expand

Commit Message

David Disseldorp Nov. 30, 2018, 11:34 p.m. UTC
Initialise the t10_wwn vendor, model and revision defaults when a
device is allocated instead of when it's enabled. This ensures that
custom vendor or model strings set prior to enablement are not later
overwritten with default values.

Signed-off-by: David Disseldorp <ddiss@suse.de>
---
 drivers/target/target_core_device.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

Comments

Hannes Reinecke Dec. 1, 2018, 2:59 p.m. UTC | #1
On 12/1/18 12:34 AM, David Disseldorp wrote:
> Initialise the t10_wwn vendor, model and revision defaults when a
> device is allocated instead of when it's enabled. This ensures that
> custom vendor or model strings set prior to enablement are not later
> overwritten with default values.
> 
> Signed-off-by: David Disseldorp <ddiss@suse.de>
> ---
>   drivers/target/target_core_device.c | 34 +++++++++++++++++-----------------
>   1 file changed, 17 insertions(+), 17 deletions(-)
>  > diff --git a/drivers/target/target_core_device.c 
b/drivers/target/target_core_device.c
> index 5512871f50e4..6318d59a1564 100644
> --- a/drivers/target/target_core_device.c
> +++ b/drivers/target/target_core_device.c
> @@ -810,6 +810,23 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
>   	mutex_init(&xcopy_lun->lun_tg_pt_md_mutex);
>   	xcopy_lun->lun_tpg = &xcopy_pt_tpg;
>   
> +	/*
> +	 * Preload the initial INQUIRY const values if we are doing
> +	 * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI
> +	 * passthrough because this is being provided by the backend LLD.
> +	 */
> +	BUILD_BUG_ON(sizeof(dev->t10_wwn.vendor) != INQUIRY_VENDOR_LEN + 1);
> +	BUILD_BUG_ON(sizeof(dev->t10_wwn.model) != INQUIRY_MODEL_LEN + 1);
> +	BUILD_BUG_ON(sizeof(dev->t10_wwn.revision) != INQUIRY_REVISION_LEN + 1);
> +	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
> +		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
> +			sizeof(dev->t10_wwn.vendor));
> +		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
> +			sizeof(dev->t10_wwn.model));
> +		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
> +			sizeof(dev->t10_wwn.revision));
> +	}
> +
>   	return dev;
>   }
>   
This is odd. I'd rather have it consistent across backends, ie either 
move the initialisation into the backends, or provide a means to check 
if the inquiry data has already been pre-filled.
But this check really is awkward.

Cheers,

Hannes
David Disseldorp Dec. 2, 2018, 10:22 p.m. UTC | #2
Hi Hannes,

Thanks for the feedback...

On Sat, 1 Dec 2018 15:59:25 +0100, Hannes Reinecke wrote:

> On 12/1/18 12:34 AM, David Disseldorp wrote:
...
> > @@ -810,6 +810,23 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
> >   	mutex_init(&xcopy_lun->lun_tg_pt_md_mutex);
> >   	xcopy_lun->lun_tpg = &xcopy_pt_tpg;
> >   
> > +	/*
> > +	 * Preload the initial INQUIRY const values if we are doing
> > +	 * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI
> > +	 * passthrough because this is being provided by the backend LLD.
> > +	 */
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.vendor) != INQUIRY_VENDOR_LEN + 1);
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.model) != INQUIRY_MODEL_LEN + 1);
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.revision) != INQUIRY_REVISION_LEN + 1);
> > +	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
> > +		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
> > +			sizeof(dev->t10_wwn.vendor));
> > +		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
> > +			sizeof(dev->t10_wwn.model));
> > +		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
> > +			sizeof(dev->t10_wwn.revision));
> > +	}
> > +
> >   	return dev;
> >   }
> >     
> This is odd. I'd rather have it consistent across backends, ie either 
> move the initialisation into the backends, or provide a means to check 
> if the inquiry data has already been pre-filled.
> But this check really is awkward.

Not quite sure I follow here. I could the default setting to the
target_backend_ops.alloc_device() code paths, but I don't think the
duplication would make this much cleaner, if at all.
I can look into this further if you like (target_backend_ops.inquiry_rev
could be dropped that way), but my preference would be to do so as a
follow-up patch-set.

Cheers, David
David Disseldorp Dec. 3, 2018, 11:52 a.m. UTC | #3
On Sun, 2 Dec 2018 23:22:23 +0100, David Disseldorp wrote:

> > > +	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
> > > +		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
> > > +			sizeof(dev->t10_wwn.vendor));
> > > +		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
> > > +			sizeof(dev->t10_wwn.model));
> > > +		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
> > > +			sizeof(dev->t10_wwn.revision));
> > > +	}
> > > +
> > >   	return dev;
> > >   }
> > >       
> > This is odd. I'd rather have it consistent across backends, ie either 
> > move the initialisation into the backends, or provide a means to check 
> > if the inquiry data has already been pre-filled.
> > But this check really is awkward.  
> 
> Not quite sure I follow here. I could the default setting to the
> target_backend_ops.alloc_device() code paths, but I don't think the
> duplication would make this much cleaner, if at all.
> I can look into this further if you like (target_backend_ops.inquiry_rev
> could be dropped that way),

Looking a little closer, I think we can drop the conditional completely
and set the vendor/model/rev defaults for all cases here:
- target_core_pscsi overwrites the defaults in the
  pscsi_configure_device() callback.
  + the contents is then only used for configfs via
    $pscsi_dev/info, $pscsi_dev/statistics/scsi_lu/vend, etc.
- target_core_user doesn't touch the defaults, nor are they used for
  anything outside of configfs.

> but my preference would be to do so as a
> follow-up patch-set.

This is still my preference.

Cheers, David
Bart Van Assche Dec. 4, 2018, 12:35 a.m. UTC | #4
On Sat, 2018-12-01 at 15:59 +0100, Hannes Reinecke wrote:
> On 12/1/18 12:34 AM, David Disseldorp wrote:
> > Initialise the t10_wwn vendor, model and revision defaults when a
> > device is allocated instead of when it's enabled. This ensures that
> > custom vendor or model strings set prior to enablement are not later
> > overwritten with default values.
> > 
> > Signed-off-by: David Disseldorp <ddiss@suse.de>
> > ---
> >   drivers/target/target_core_device.c | 34 +++++++++++++++++-----------------
> >   1 file changed, 17 insertions(+), 17 deletions(-)
> >  > diff --git a/drivers/target/target_core_device.c 
> 
> b/drivers/target/target_core_device.c
> > index 5512871f50e4..6318d59a1564 100644
> > --- a/drivers/target/target_core_device.c
> > +++ b/drivers/target/target_core_device.c
> > @@ -810,6 +810,23 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
> >   	mutex_init(&xcopy_lun->lun_tg_pt_md_mutex);
> >   	xcopy_lun->lun_tpg = &xcopy_pt_tpg;
> >   
> > +	/*
> > +	 * Preload the initial INQUIRY const values if we are doing
> > +	 * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI
> > +	 * passthrough because this is being provided by the backend LLD.
> > +	 */
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.vendor) != INQUIRY_VENDOR_LEN + 1);
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.model) != INQUIRY_MODEL_LEN + 1);
> > +	BUILD_BUG_ON(sizeof(dev->t10_wwn.revision) != INQUIRY_REVISION_LEN + 1);
> > +	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
> > +		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
> > +			sizeof(dev->t10_wwn.vendor));
> > +		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
> > +			sizeof(dev->t10_wwn.model));
> > +		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
> > +			sizeof(dev->t10_wwn.revision));
> > +	}
> > +
> >   	return dev;
> >   }
> >   
> 
> This is odd. I'd rather have it consistent across backends, ie either 
> move the initialisation into the backends, or provide a means to check 
> if the inquiry data has already been pre-filled.
> But this check really is awkward.

Agreed. I also would like to see that that if-condition is removed ...

Thanks,

Bart.
diff mbox series

Patch

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 5512871f50e4..6318d59a1564 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -810,6 +810,23 @@  struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
 	mutex_init(&xcopy_lun->lun_tg_pt_md_mutex);
 	xcopy_lun->lun_tpg = &xcopy_pt_tpg;
 
+	/*
+	 * Preload the initial INQUIRY const values if we are doing
+	 * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI
+	 * passthrough because this is being provided by the backend LLD.
+	 */
+	BUILD_BUG_ON(sizeof(dev->t10_wwn.vendor) != INQUIRY_VENDOR_LEN + 1);
+	BUILD_BUG_ON(sizeof(dev->t10_wwn.model) != INQUIRY_MODEL_LEN + 1);
+	BUILD_BUG_ON(sizeof(dev->t10_wwn.revision) != INQUIRY_REVISION_LEN + 1);
+	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
+		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
+			sizeof(dev->t10_wwn.vendor));
+		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
+			sizeof(dev->t10_wwn.model));
+		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
+			sizeof(dev->t10_wwn.revision));
+	}
+
 	return dev;
 }
 
@@ -984,23 +1001,6 @@  int target_configure_device(struct se_device *dev)
 	 */
 	INIT_WORK(&dev->qf_work_queue, target_qf_do_work);
 
-	/*
-	 * Preload the initial INQUIRY const values if we are doing
-	 * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI
-	 * passthrough because this is being provided by the backend LLD.
-	 */
-	BUILD_BUG_ON(sizeof(dev->t10_wwn.vendor) != INQUIRY_VENDOR_LEN + 1);
-	BUILD_BUG_ON(sizeof(dev->t10_wwn.model) != INQUIRY_MODEL_LEN + 1);
-	BUILD_BUG_ON(sizeof(dev->t10_wwn.revision) != INQUIRY_REVISION_LEN + 1);
-	if (!(dev->transport->transport_flags & TRANSPORT_FLAG_PASSTHROUGH)) {
-		strlcpy(dev->t10_wwn.vendor, "LIO-ORG",
-			sizeof(dev->t10_wwn.vendor));
-		strlcpy(dev->t10_wwn.model, dev->transport->inquiry_prod,
-			sizeof(dev->t10_wwn.model));
-		strlcpy(dev->t10_wwn.revision, dev->transport->inquiry_rev,
-			sizeof(dev->t10_wwn.revision));
-	}
-
 	scsi_dump_inquiry(dev);
 
 	spin_lock(&hba->device_lock);