@@ -888,7 +888,7 @@ qla2x00_sysfs_read_xgmac_stats(struct file *filp, struct kobject *kobj,
count = 0;
}
- count = actual_size > count ? count: actual_size;
+ count = actual_size > count ? count : actual_size;
memcpy(buf, ha->xgmac_data, count);
return count;
@@ -2811,8 +2811,8 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
/* initialized vport states */
atomic_set(&vha->loop_state, LOOP_DOWN);
- vha->vp_err_state= VP_ERR_PORTDWN;
- vha->vp_prev_err_state= VP_ERR_UNKWN;
+ vha->vp_err_state = VP_ERR_PORTDWN;
+ vha->vp_prev_err_state = VP_ERR_UNKWN;
/* Check if physical ha port is Up */
if (atomic_read(&base_vha->loop_state) == LOOP_DOWN ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
@@ -445,7 +445,7 @@ qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram,
}
}
- *nxt = rval == QLA_SUCCESS ? &ram[cnt]: NULL;
+ *nxt = rval == QLA_SUCCESS ? &ram[cnt] : NULL;
return rval;
}
@@ -2448,7 +2448,7 @@ qla2x00_fdmiv2_rpa(scsi_qla_host_t *vha)
eiter->type = cpu_to_be16(FDMI_PORT_MAX_FRAME_SIZE);
eiter->len = cpu_to_be16(4 + 4);
eiter->a.max_frame_size = IS_FWI2_CAPABLE(ha) ?
- le16_to_cpu(icb24->frame_payload_size):
+ le16_to_cpu(icb24->frame_payload_size) :
le16_to_cpu(ha->init_cb->frame_payload_size);
eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
size += 4 + 4;
@@ -4711,7 +4711,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
ha->zio_mode = icb->add_firmware_options[0] &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = icb->interrupt_delay_timer ?
- icb->interrupt_delay_timer: 2;
+ icb->interrupt_delay_timer : 2;
}
icb->add_firmware_options[0] &=
~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
@@ -4744,7 +4744,7 @@ qla2x00_rport_del(void *data)
unsigned long flags;
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
- rport = fcport->drport ? fcport->drport: fcport->rport;
+ rport = fcport->drport ? fcport->drport : fcport->rport;
fcport->drport = NULL;
spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
if (rport) {
@@ -7194,11 +7194,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
ha->flags.disable_risc_code_load = 0;
ha->flags.enable_lip_reset = 0;
ha->flags.enable_lip_full_login =
- le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
ha->flags.enable_target_reset =
- le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
ha->flags.enable_led_scheme = 0;
- ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+ ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
(BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -7272,7 +7272,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
- le16_to_cpu(icb->interrupt_delay_timer): 2;
+ le16_to_cpu(icb->interrupt_delay_timer) : 2;
}
icb->firmware_options_2 &= cpu_to_le32(
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
@@ -8218,7 +8218,7 @@ qla84xx_init_chip(scsi_qla_host_t *vha)
mutex_unlock(&ha->cs84xx->fw_update_mutex);
- return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
+ return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED :
QLA_SUCCESS;
}
@@ -8414,11 +8414,11 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
ha->flags.disable_risc_code_load = 0;
ha->flags.enable_lip_reset = 0;
ha->flags.enable_lip_full_login =
- le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+ le32_to_cpu(nv->host_p) & BIT_10 ? 1 : 0;
ha->flags.enable_target_reset =
- le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+ le32_to_cpu(nv->host_p) & BIT_11 ? 1 : 0;
ha->flags.enable_led_scheme = 0;
- ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+ ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1 : 0;
ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
(BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -8491,7 +8491,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
(BIT_3 | BIT_2 | BIT_1 | BIT_0);
ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
- le16_to_cpu(icb->interrupt_delay_timer): 2;
+ le16_to_cpu(icb->interrupt_delay_timer) : 2;
}
icb->firmware_options_2 &= cpu_to_le32(
~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
@@ -2494,7 +2494,7 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
- cpu_to_le16(sp->fcport->loop_id):
+ cpu_to_le16(sp->fcport->loop_id) :
cpu_to_le16(sp->fcport->loop_id << 8);
mbx->mb2 = cpu_to_le16(sp->fcport->d_id.b.domain);
mbx->mb3 = cpu_to_le16(sp->fcport->d_id.b.area << 8 |
@@ -2033,7 +2033,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
/* Passback COS information. */
fcport->supported_classes = (pd->options & BIT_4) ?
- FC_COS_CLASS2: FC_COS_CLASS3;
+ FC_COS_CLASS2 : FC_COS_CLASS3;
}
gpd_error_out:
@@ -3277,7 +3277,7 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
/* Issue marker IOCB. */
rval2 = qla2x00_marker(vha, ha->base_qpair, fcport->loop_id, l,
- type == TCF_LUN_RESET ? MK_SYNC_ID_LUN: MK_SYNC_ID);
+ type == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
if (rval2 != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x1099,
"Failed to issue marker IOCB (%x).\n", rval2);
@@ -108,7 +108,7 @@ MODULE_PARM_DESC(ql2xshiftctondsd,
"Set to control shifting of command type processing "
"based on total number of SG elements.");
-int ql2xfdmienable=1;
+int ql2xfdmienable = 1;
module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xfdmienable,
@@ -154,7 +154,7 @@ MODULE_PARM_DESC(ql2xenablehba_err_chk,
" 1 -- Error isolation enabled only for DIX Type 0\n"
" 2 -- Error isolation enabled for all Types\n");
-int ql2xiidmaenable=1;
+int ql2xiidmaenable = 1;
module_param(ql2xiidmaenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xiidmaenable,
"Enables iIDMA settings "
@@ -987,7 +987,7 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
fdt->unprotect_sec_cmd);
ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
- flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd):
+ flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
flash_conf_addr(ha, 0x0336);
}
goto done;
@@ -855,7 +855,7 @@ enum trace_flags {
TRC_CTIO_ERR = BIT_11,
TRC_CTIO_DONE = BIT_12,
TRC_CTIO_ABORTED = BIT_13,
- TRC_CTIO_STRANGE= BIT_14,
+ TRC_CTIO_STRANGE = BIT_14,
TRC_CMD_DONE = BIT_15,
TRC_CMD_CHK_STOP = BIT_16,
TRC_CMD_FREE = BIT_17,
Improve source code readability by inserting spaces where these are required according to the coding standard. This patch only inserts whitespace and does not make any other changes. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/scsi/qla2xxx/qla_attr.c | 6 +++--- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/scsi/qla2xxx/qla_gs.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 22 +++++++++++----------- drivers/scsi/qla2xxx/qla_iocb.c | 2 +- drivers/scsi/qla2xxx/qla_mbx.c | 4 ++-- drivers/scsi/qla2xxx/qla_os.c | 4 ++-- drivers/scsi/qla2xxx/qla_sup.c | 2 +- drivers/scsi/qla2xxx/qla_target.h | 2 +- 9 files changed, 23 insertions(+), 23 deletions(-)