==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xd0
Read of size 8 at addr ffff8880ca05a490 by task modprobe/857
CPU: 0 PID: 857 Comm: modprobe Not tainted 5.1.0-rc1-dbg+ #4
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x86/0xca
print_address_description+0x6c/0x234
? __list_del_entry_valid+0x15/0xd0
kasan_report.cold.3+0x1b/0x34
? __list_del_entry_valid+0x15/0xd0
? __kmem_cache_shutdown.cold.95+0xf5/0x176
? __list_del_entry_valid+0x15/0xd0
__asan_load8+0x54/0x90
__list_del_entry_valid+0x15/0xd0
dma_pool_destroy+0x4f/0x260
? dma_free_attrs+0xb4/0xd0
qla2x00_mem_free+0x529/0xcc0 [qla2xxx]
? kobject_put+0xdb/0x230
qla2x00_probe_one+0x2b5e/0x45f0 [qla2xxx]
? qla2xxx_pci_error_detected+0x210/0x210 [qla2xxx]
? match_held_lock+0x20/0x240
? find_held_lock+0xca/0xf0
? mark_held_locks+0x86/0xb0
? _raw_spin_unlock_irqrestore+0x52/0x60
? __pm_runtime_resume+0x5b/0xb0
? lockdep_hardirqs_on+0x185/0x260
? _raw_spin_unlock_irqrestore+0x52/0x60
? trace_hardirqs_on+0x24/0x130
? preempt_count_sub+0x13/0xc0
? _raw_spin_unlock_irqrestore+0x3d/0x60
pci_device_probe+0x154/0x1e0
really_probe+0x17d/0x540
? device_driver_attach+0x90/0x90
driver_probe_device+0x113/0x170
? device_driver_attach+0x90/0x90
device_driver_attach+0x88/0x90
__driver_attach+0xb5/0x190
bus_for_each_dev+0xf8/0x160
? subsys_dev_iter_exit+0x10/0x10
? kasan_check_read+0x11/0x20
? preempt_count_sub+0x13/0xc0
? _raw_spin_unlock+0x2c/0x50
driver_attach+0x26/0x30
bus_add_driver+0x238/0x2f0
driver_register+0xd7/0x150
__pci_register_driver+0xd5/0xe0
? 0xffffffffa06c8000
qla2x00_module_init+0x208/0x254 [qla2xxx]
do_one_initcall+0xc0/0x3c9
? trace_event_raw_event_initcall_finish+0x150/0x150
? __kasan_kmalloc.constprop.5+0xc7/0xd0
? kasan_unpoison_shadow+0x35/0x50
? kasan_poison_shadow+0x2f/0x40
? __asan_register_globals+0x5a/0x70
do_init_module+0x103/0x330
load_module+0x36df/0x3b70
? fsnotify+0x611/0x640
? module_frob_arch_sections+0x20/0x20
? kernel_read+0x74/0xa0
? kasan_check_write+0x14/0x20
? kernel_read_file+0x25e/0x320
? do_mmap+0x42c/0x6c0
__do_sys_finit_module+0x133/0x1c0
? __do_sys_finit_module+0x133/0x1c0
? __do_sys_init_module+0x210/0x210
? fput_many+0x1b/0xc0
? fput+0xe/0x10
? do_syscall_64+0x14/0x210
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
__x64_sys_finit_module+0x3e/0x50
do_syscall_64+0x72/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8bd5c03219
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 fc 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9d11de98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055ef21596b50 RCX: 00007f8bd5c03219
RDX: 0000000000000000 RSI: 000055ef21596570 RDI: 0000000000000004
RBP: 000055ef21596570 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000055ef21596c80 R14: 0000000000040000 R15: 000055ef21596b50
Allocated by task 857:
save_stack+0x43/0xd0
__kasan_kmalloc.constprop.5+0xc7/0xd0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x144/0x300
dma_pool_create+0xb5/0x3b0
qla2x00_mem_alloc+0xb98/0x1ad0 [qla2xxx]
qla2x00_probe_one+0xe28/0x45f0 [qla2xxx]
pci_device_probe+0x154/0x1e0
really_probe+0x17d/0x540
driver_probe_device+0x113/0x170
device_driver_attach+0x88/0x90
__driver_attach+0xb5/0x190
bus_for_each_dev+0xf8/0x160
driver_attach+0x26/0x30
bus_add_driver+0x238/0x2f0
driver_register+0xd7/0x150
__pci_register_driver+0xd5/0xe0
qla2x00_module_init+0x208/0x254 [qla2xxx]
do_one_initcall+0xc0/0x3c9
do_init_module+0x103/0x330
load_module+0x36df/0x3b70
__do_sys_finit_module+0x133/0x1c0
__x64_sys_finit_module+0x3e/0x50
do_syscall_64+0x72/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 857:
save_stack+0x43/0xd0
__kasan_slab_free+0x139/0x190
kasan_slab_free+0xe/0x10
kfree+0xf0/0x2c0
dma_pool_destroy+0x24c/0x260
qla2x00_mem_free+0x529/0xcc0 [qla2xxx]
qla2x00_free_device+0x167/0x1b0 [qla2xxx]
qla2x00_probe_one+0x2b28/0x45f0 [qla2xxx]
pci_device_probe+0x154/0x1e0
really_probe+0x17d/0x540
driver_probe_device+0x113/0x170
device_driver_attach+0x88/0x90
__driver_attach+0xb5/0x190
bus_for_each_dev+0xf8/0x160
driver_attach+0x26/0x30
bus_add_driver+0x238/0x2f0
driver_register+0xd7/0x150
__pci_register_driver+0xd5/0xe0
qla2x00_module_init+0x208/0x254 [qla2xxx]
do_one_initcall+0xc0/0x3c9
do_init_module+0x103/0x330
load_module+0x36df/0x3b70
__do_sys_finit_module+0x133/0x1c0
__x64_sys_finit_module+0x3e/0x50
do_syscall_64+0x72/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880ca05a400
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 144 bytes inside of
192-byte region [ffff8880ca05a400, ffff8880ca05a4c0)
The buggy address belongs to the page:
page:ffffea0003281680 count:1 mapcount:0 mapping:ffff88811bf03380 index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 0000000000000000 0000000c00000001 ffff88811bf03380
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880ca05a380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880ca05a400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880ca05a480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff8880ca05a500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880ca05a580: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
==================================================================
Fixes: f8f97b0c5b7f ("scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
---
drivers/scsi/qla2xxx/qla_init.c | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
@@ -7692,8 +7692,6 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
dcode = fwdt->template;
qla24xx_read_flash_data(vha, dcode, faddr, risc_size);
- for (i = 0; i < risc_size; i++)
- dcode[i] = le32_to_cpu(dcode[i]);
if (!qla27xx_fwdt_template_valid(dcode)) {
ql_log(ql_log_warn, vha, 0x0165,
@@ -7859,22 +7857,11 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
}
fwcode = (void *)blob->fw->data;
- dcode = fwcode + 4;
+ dcode = fwcode;
if (qla24xx_risc_firmware_invalid(dcode)) {
ql_log(ql_log_fatal, vha, 0x0093,
"Unable to verify integrity of firmware image (%zd).\n",
blob->fw->size);
- return QLA_FUNCTION_FAILED;
- }
- for (i = 0; i < 4; i++)
- dcode[i] = be32_to_cpu(fwcode[i + 4]);
- if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
- dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
- (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
- dcode[3] == 0)) {
- ql_log(ql_log_fatal, vha, 0x0094,
- "Unable to verify integrity of firmware image (%zd).\n",
- blob->fw->size);
ql_log(ql_log_fatal, vha, 0x0095,
"Firmware data: %08x %08x %08x %08x.\n",
dcode[0], dcode[1], dcode[2], dcode[3]);
@@ -7897,7 +7884,6 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
dlen = ha->fw_transfer_size >> 2;
for (fragment = 0; risc_size; fragment++) {
- dlen = (uint32_t)(ha->fw_transfer_size >> 2);
if (dlen > risc_size)
dlen = risc_size;
This patch fixes regression introduced by commit f8f97b0c5b7f ("scsi: qla2xxx: Cleanups for NVRAM/Flash read/write path") where flash read/write routine cleanup left out code which resulted into checksum failure leading to use-after-free stack during driver load. Following stack trace is seen in the log file qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.01.00.16-k. qla2xxx [0000:00:0b.0]-001d: : Found an ISP2532 irq 11 iobase 0x0000000000f47f03. qla2xxx [0000:00:0b.0]-00cd:8: ISP Firmware failed checksum. qla2xxx [0000:00:0b.0]-00cf:8: Setup chip ****FAILED****. qla2xxx [0000:00:0b.0]-00d6:8: Failed to initialize adapter - Adapter flags 2.