diff mbox series

[18/21] lpfc: Fix FDMI fc4type for nvme support

Message ID 20190522004911.573-19-jsmart2021@gmail.com (mailing list archive)
State Mainlined
Commit 93f647f93df14742923133582ad603bf35628e92
Headers show
Series lpfc: Update lpfc to revision 12.2.0.3 | expand

Commit Message

James Smart May 22, 2019, 12:49 a.m. UTC 
FDMI protocol support registration was not accurately showing
nvme support. The fcponly-path clears the parameter object.

Move the code out of the fcponly code path.
Fix the FDMI registration data to properly check for nvme support.
Commonize the manner in which the fdmi routines set protocol
support.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_ct.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 4812bbbf43cc..ec72c39997d2 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -2358,6 +2358,7 @@  static int
 lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 			    struct lpfc_fdmi_attr_def *ad)
 {
+	struct lpfc_hba   *phba = vport->phba;
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
@@ -2366,9 +2367,13 @@  lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
-	if (vport->nvmei_support || vport->phba->nvmet_support)
-		ae->un.AttrTypes[6] = 0x01; /* Type 0x28 - NVME */
 	ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */
+
+	/* Check to see if Firmware supports NVME and on physical port */
+	if ((phba->sli_rev == LPFC_SLI_REV4) && (vport == phba->pport) &&
+	    phba->sli4_hba.pc_sli4_params.nvme)
+		ae->un.AttrTypes[6] = 0x01; /* Type 0x28 - NVME */
+
 	size = FOURBYTES + 32;
 	ad->AttrLen = cpu_to_be16(size);
 	ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_FC4_TYPES);
@@ -2680,9 +2685,12 @@  lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
+	ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */
+
+	/* Check to see if NVME is configured or not */
 	if (vport->phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
 		ae->un.AttrTypes[6] = 0x1; /* Type 0x28 - NVME */
-	ae->un.AttrTypes[7] = 0x01; /* Type 0x20 - CT */
+
 	size = FOURBYTES + 32;
 	ad->AttrLen = cpu_to_be16(size);
 	ad->AttrType = cpu_to_be16(RPRT_ACTIVE_FC4_TYPES);