@@ -75,8 +75,9 @@
#define BNX2X_DOORBELL_PCI_BAR 2
#define BNX2FC_MAX_BD_LEN 0xffff
-#define BNX2FC_BD_SPLIT_SZ 0x8000
-#define BNX2FC_MAX_BDS_PER_CMD 256
+#define BNX2FC_BD_SPLIT_SZ 0xffff
+#define BNX2FC_MAX_BDS_PER_CMD 255
+#define BNX2FC_FW_MAX_BDS_PER_CMD 255
#define BNX2FC_SQ_WQES_MAX 256
@@ -2971,7 +2971,8 @@ static struct scsi_host_template bnx2fc_shost_template = {
.this_id = -1,
.cmd_per_lun = 3,
.sg_tablesize = BNX2FC_MAX_BDS_PER_CMD,
- .max_sectors = 1024,
+ .dma_boundary = 0x7fff,
+ .max_sectors = 0x3fbf,
.track_queue_depth = 1,
.slave_configure = bnx2fc_slave_configure,
.shost_attrs = bnx2fc_host_attrs,
@@ -1660,6 +1660,7 @@ static int bnx2fc_map_sg(struct bnx2fc_cmd *io_req)
u64 addr;
int i;
+ WARN_ON(scsi_sg_count(sc) > BNX2FC_MAX_BDS_PER_CMD);
/*
* Use dma_map_sg directly to ensure we're using the correct
* dev struct off of pcidev.
@@ -1707,6 +1708,16 @@ static int bnx2fc_build_bd_list_from_sg(struct bnx2fc_cmd *io_req)
}
io_req->bd_tbl->bd_valid = bd_count;
+ /*
+ * Return the command to ML if BD count increase the max number
+ * that can be handled by FW.
+ */
+ if (bd_count > BNX2FC_FW_MAX_BDS_PER_CMD) {
+ pr_err("bd_count = %d increased FW supported max BD(255), task_id = 0x%x\n",
+ bd_count, io_req->xid);
+ return -ENOMEM;
+ }
+
return 0;
}
- Reduce the sg_tablesize to 255. - Reduce the MAX BDs firmware can handle to 255. - Return IO to ML if BD goes more then 255 after split. - Correct the size of each BD split to 0xffff. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> --- drivers/scsi/bnx2fc/bnx2fc.h | 5 +++-- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 3 ++- drivers/scsi/bnx2fc/bnx2fc_io.c | 11 +++++++++++ 3 files changed, 16 insertions(+), 3 deletions(-)