@@ -1125,7 +1125,8 @@ qla2x00_pci_info_show(struct device *dev, struct device_attribute *attr,
char pci_info[30];
return scnprintf(buf, PAGE_SIZE, "%s\n",
- vha->hw->isp_ops->pci_info_str(vha, pci_info));
+ vha->hw->isp_ops->pci_info_str(vha, pci_info,
+ sizeof(pci_info)));
}
static ssize_t
@@ -3112,7 +3112,7 @@ struct isp_operations {
void (*update_fw_options) (struct scsi_qla_host *);
int (*load_risc) (struct scsi_qla_host *, uint32_t *);
- char * (*pci_info_str) (struct scsi_qla_host *, char *);
+ char * (*pci_info_str)(struct scsi_qla_host *, char *, size_t);
char * (*fw_version_str)(struct scsi_qla_host *, char *, size_t);
irq_handler_t intr_handler;
@@ -732,7 +732,7 @@ extern int qlafx00_initialize_adapter(struct scsi_qla_host *);
extern int qlafx00_soft_reset(scsi_qla_host_t *);
extern int qlafx00_chip_diag(scsi_qla_host_t *);
extern void qlafx00_config_rings(struct scsi_qla_host *);
-extern char *qlafx00_pci_info_str(struct scsi_qla_host *, char *);
+extern char *qlafx00_pci_info_str(struct scsi_qla_host *, char *, size_t);
extern char *qlafx00_fw_version_str(struct scsi_qla_host *, char *, size_t);
extern irqreturn_t qlafx00_intr_handler(int, void *);
extern void qlafx00_enable_intrs(struct qla_hw_data *);
@@ -688,14 +688,12 @@ qlafx00_config_rings(struct scsi_qla_host *vha)
}
char *
-qlafx00_pci_info_str(struct scsi_qla_host *vha, char *str)
+qlafx00_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
{
struct qla_hw_data *ha = vha->hw;
- if (pci_is_pcie(ha->pdev)) {
- strcpy(str, "PCIe iSA");
- return str;
- }
+ if (pci_is_pcie(ha->pdev))
+ strlcpy(str, "PCIe iSA", str_len);
return str;
}
@@ -536,80 +536,70 @@ static void qla2x00_free_queues(struct qla_hw_data *ha)
}
static char *
-qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str)
+qla2x00_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
{
struct qla_hw_data *ha = vha->hw;
- static char *pci_bus_modes[] = {
+ static const char *const pci_bus_modes[] = {
"33", "66", "100", "133",
};
uint16_t pci_bus;
- strcpy(str, "PCI");
pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
if (pci_bus) {
- strcat(str, "-X (");
- strcat(str, pci_bus_modes[pci_bus]);
+ snprintf(str, str_len, "PCI-X (%s MHz)",
+ pci_bus_modes[pci_bus]);
} else {
pci_bus = (ha->pci_attr & BIT_8) >> 8;
- strcat(str, " (");
- strcat(str, pci_bus_modes[pci_bus]);
+ snprintf(str, str_len, "PCI (%s MHz)", pci_bus_modes[pci_bus]);
}
- strcat(str, " MHz)");
- return (str);
+ return str;
}
static char *
-qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str)
+qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
{
- static char *pci_bus_modes[] = { "33", "66", "100", "133", };
+ static const char *const pci_bus_modes[] = {
+ "33", "66", "100", "133",
+ };
struct qla_hw_data *ha = vha->hw;
uint32_t pci_bus;
if (pci_is_pcie(ha->pdev)) {
- char lwstr[6];
uint32_t lstat, lspeed, lwidth;
+ const char *speed_str;
pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
lspeed = lstat & PCI_EXP_LNKCAP_SLS;
lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
- strcpy(str, "PCIe (");
switch (lspeed) {
case 1:
- strcat(str, "2.5GT/s ");
+ speed_str = "2.5GT/s";
break;
case 2:
- strcat(str, "5.0GT/s ");
+ speed_str = "5.0GT/s";
break;
case 3:
- strcat(str, "8.0GT/s ");
+ speed_str = "8.0GT/s";
break;
default:
- strcat(str, "<unknown> ");
+ speed_str = "<unknown>";
break;
}
- snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
- strcat(str, lwstr);
+ snprintf(str, str_len, "PCIe (%s x%d)", speed_str, lwidth);
return str;
}
- strcpy(str, "PCI");
pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
- if (pci_bus == 0 || pci_bus == 8) {
- strcat(str, " (");
- strcat(str, pci_bus_modes[pci_bus >> 3]);
- } else {
- strcat(str, "-X ");
- if (pci_bus & BIT_2)
- strcat(str, "Mode 2");
- else
- strcat(str, "Mode 1");
- strcat(str, " (");
- strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
- }
- strcat(str, " MHz)");
+ if (pci_bus == 0 || pci_bus == 8)
+ snprintf(str, str_len, "PCI (%s MHz)",
+ pci_bus_modes[pci_bus >> 3]);
+ else
+ snprintf(str, str_len, "PCI-X Mode %d (%s MHz)",
+ pci_bus & 4 ? 2 : 1,
+ pci_bus_modes[pci_bus & 3]);
return str;
}
@@ -3452,7 +3442,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
"QLogic %s - %s.\n", ha->model_number, ha->model_desc);
ql_log(ql_log_info, base_vha, 0x00fc,
"ISP%04X: %s @ %s hdma%c host#=%ld fw=%s.\n",
- pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info),
+ pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info,
+ sizeof(pci_info)),
pci_name(pdev), ha->flags.enable_64bit_addressing ? '+' : '-',
base_vha->host_no,
ha->isp_ops->fw_version_str(base_vha, fw_str, sizeof(fw_str)));
Pass the output buffer size to the code that generates a PCI info string and check the output buffer size while generating a PCI info string. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/scsi/qla2xxx/qla_attr.c | 3 +- drivers/scsi/qla2xxx/qla_def.h | 2 +- drivers/scsi/qla2xxx/qla_gbl.h | 2 +- drivers/scsi/qla2xxx/qla_mr.c | 8 ++--- drivers/scsi/qla2xxx/qla_os.c | 59 ++++++++++++++------------------- 5 files changed, 32 insertions(+), 42 deletions(-)