@@ -797,6 +797,7 @@ struct lpfc_hba {
uint8_t mds_diags_support;
uint8_t bbcredit_support;
uint8_t enab_exp_wqcq_pages;
+ u8 nsler; /* Firmware supports FC-NVMe-2 SLER */
/* HBA Config Parameters */
uint32_t cfg_ack0;
@@ -112,6 +112,8 @@ struct lpfc_nodelist {
uint8_t nlp_retry; /* used for ELS retries */
uint8_t nlp_fcp_info; /* class info, bits 0-3 */
#define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */
+ u8 nlp_nvme_info; /* NVME NSLER Support */
+#define NLP_NVME_NSLER 0x1 /* NVME NSLER device */
uint16_t nlp_usg_map; /* ndlp management usage bitmap */
#define NLP_USG_NODE_ACT_BIT 0x1 /* Indicate ndlp is actively used */
@@ -2435,6 +2435,10 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
npr_nvme = (struct lpfc_nvme_prli *)pcmd;
bf_set(prli_type_code, npr_nvme, PRLI_NVME_TYPE);
bf_set(prli_estabImagePair, npr_nvme, 0); /* Should be 0 */
+ if (phba->nsler) {
+ bf_set(prli_nsler, npr_nvme, 1);
+ bf_set(prli_conf, npr_nvme, 1);
+ }
/* Only initiators request first burst. */
if ((phba->cfg_nvme_enable_fb) &&
@@ -3480,6 +3480,10 @@ struct lpfc_sli4_parameters {
#define cfg_bv1s_MASK 0x00000001
#define cfg_bv1s_WORD word19
+#define cfg_nsler_SHIFT 12
+#define cfg_nsler_MASK 0x00000001
+#define cfg_nsler_WORD word19
+
uint32_t word20;
#define cfg_max_tow_xri_SHIFT 0
#define cfg_max_tow_xri_MASK 0x0000ffff
@@ -4621,6 +4625,7 @@ struct lpfc_nvme_prli {
#define prli_type_code_WORD word1
uint32_t word_rsvd2;
uint32_t word_rsvd3;
+
uint32_t word4;
#define prli_fba_SHIFT 0
#define prli_fba_MASK 0x00000001
@@ -4637,6 +4642,9 @@ struct lpfc_nvme_prli {
#define prli_conf_SHIFT 7
#define prli_conf_MASK 0x00000001
#define prli_conf_WORD word4
+#define prli_nsler_SHIFT 8
+#define prli_nsler_MASK 0x00000001
+#define prli_nsler_WORD word4
uint32_t word5;
#define prli_fb_sz_SHIFT 0
#define prli_fb_sz_MASK 0x0000ffff
@@ -11867,6 +11867,14 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
else
phba->mds_diags_support = 0;
+ /*
+ * Check if the SLI port supports NSLER
+ */
+ if (bf_get(cfg_nsler, mbx_sli4_parameters))
+ phba->nsler = 1;
+ else
+ phba->nsler = 0;
+
return 0;
}
@@ -799,9 +799,15 @@ lpfc_rcv_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (npr->writeXferRdyDis)
ndlp->nlp_flag |= NLP_FIRSTBURST;
}
- if (npr->Retry)
+ if (npr->Retry && ndlp->nlp_type &
+ (NLP_FCP_INITIATOR | NLP_FCP_TARGET))
ndlp->nlp_fcp_info |= NLP_FCP_2_DEVICE;
+ if (npr->Retry && phba->nsler &&
+ ndlp->nlp_type & (NLP_NVME_INITIATOR | NLP_NVME_TARGET))
+ ndlp->nlp_nvme_info |= NLP_NVME_NSLER;
+
+
/* If this driver is in nvme target mode, set the ndlp's fc4
* type to NVME provided the PRLI response claims NVME FC4
* type. Target mode does not issue gft_id so doesn't get
@@ -2024,6 +2030,11 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
if (bf_get_be32(prli_init, nvpr))
ndlp->nlp_type |= NLP_NVME_INITIATOR;
+ if (phba->nsler && bf_get_be32(prli_nsler, nvpr))
+ ndlp->nlp_nvme_info |= NLP_NVME_NSLER;
+ else
+ ndlp->nlp_nvme_info &= ~NLP_NVME_NSLER;
+
/* Target driver cannot solicit NVME FB. */
if (bf_get_be32(prli_tgt, nvpr)) {
/* Complete the nvme target roles. The transport
@@ -1255,6 +1255,9 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
sizeof(uint32_t) * 8);
cstat->control_requests++;
}
+
+ if (pnode->nlp_nvme_info & NLP_NVME_NSLER)
+ bf_set(wqe_erp, &wqe->generic.wqe_com, 1);
/*
* Finish initializing those WQE fields that are independent
* of the nvme_cmnd request_buffer