diff mbox series

[1/3] qla2xxx: Fix MPI failure AEN (8200) handling.

Message ID 20200327102730.22351-2-njavali@marvell.com (mailing list archive)
State Superseded
Headers show
Series qla2xxx: Updates for the driver | expand

Commit Message

Nilesh Javali March 27, 2020, 10:27 a.m. UTC
From: Arun Easi <aeasi@marvell.com>

Today, upon an MPI failure AEN, on top of collecting an MPI dump, a
regular firmware dump is also taken and the chip reset. This is
disruptive to IOs and not required. So, make the firmware dump
collection, followed by chip reset optional (not done by default).

Firmware dump buffer and MPI dump buffer are independent of each
other with this change and each can have dump that was taken at two
different times for two different issues. The MPI dump is saved in a
separate buffer and is retrieved differently from firmware dump.

To collect full dump on MPI failure AEN, a module parameter is
introduced:
    ql2xfulldump_on_mpifail (default: 0)

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_attr.c |  30 +++++++-
 drivers/scsi/qla2xxx/qla_def.h  |  13 +++-
 drivers/scsi/qla2xxx/qla_gbl.h  |   3 +
 drivers/scsi/qla2xxx/qla_init.c |   2 +
 drivers/scsi/qla2xxx/qla_isr.c  |  54 ++++++++++-----
 drivers/scsi/qla2xxx/qla_os.c   |   6 ++
 drivers/scsi/qla2xxx/qla_tmpl.c | 118 ++++++++++++++++++++++++++------
 7 files changed, 185 insertions(+), 41 deletions(-)

Comments

Himanshu Madhani March 27, 2020, 2:20 p.m. UTC | #1
On 3/27/2020 5:27 AM, Nilesh Javali wrote:
> From: Arun Easi <aeasi@marvell.com>
> 
> Today, upon an MPI failure AEN, on top of collecting an MPI dump, a
> regular firmware dump is also taken and the chip reset. This is
> disruptive to IOs and not required. So, make the firmware dump
> collection, followed by chip reset optional (not done by default).
> 
> Firmware dump buffer and MPI dump buffer are independent of each
> other with this change and each can have dump that was taken at two
> different times for two different issues. The MPI dump is saved in a
> separate buffer and is retrieved differently from firmware dump.
> 
> To collect full dump on MPI failure AEN, a module parameter is
> introduced:
>      ql2xfulldump_on_mpifail (default: 0)
> 
> Signed-off-by: Arun Easi <aeasi@marvell.com>
> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
> Signed-off-by: Nilesh Javali <njavali@marvell.com>
> ---
>   drivers/scsi/qla2xxx/qla_attr.c |  30 +++++++-
>   drivers/scsi/qla2xxx/qla_def.h  |  13 +++-
>   drivers/scsi/qla2xxx/qla_gbl.h  |   3 +
>   drivers/scsi/qla2xxx/qla_init.c |   2 +
>   drivers/scsi/qla2xxx/qla_isr.c  |  54 ++++++++++-----
>   drivers/scsi/qla2xxx/qla_os.c   |   6 ++
>   drivers/scsi/qla2xxx/qla_tmpl.c | 118 ++++++++++++++++++++++++++------
>   7 files changed, 185 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
> index 97cabd7e0014..3a5f6f27587e 100644
> --- a/drivers/scsi/qla2xxx/qla_attr.c
> +++ b/drivers/scsi/qla2xxx/qla_attr.c
> @@ -26,7 +26,8 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
>   	struct qla_hw_data *ha = vha->hw;
>   	int rval = 0;
>   
> -	if (!(ha->fw_dump_reading || ha->mctp_dump_reading))
> +	if (!(ha->fw_dump_reading || ha->mctp_dump_reading ||
> +	      ha->mpi_fw_dump_reading))
>   		return 0;
>   
>   	mutex_lock(&ha->optrom_mutex);
> @@ -42,6 +43,10 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
>   	} else if (ha->mctp_dumped && ha->mctp_dump_reading) {
>   		rval = memory_read_from_buffer(buf, count, &off, ha->mctp_dump,
>   		    MCTP_DUMP_SIZE);
> +	} else if (ha->mpi_fw_dumped && ha->mpi_fw_dump_reading) {
> +		rval = memory_read_from_buffer(buf, count, &off,
> +					       ha->mpi_fw_dump,
> +					       ha->mpi_fw_dump_len);
>   	} else if (ha->fw_dump_reading) {
>   		rval = memory_read_from_buffer(buf, count, &off, ha->fw_dump,
>   					ha->fw_dump_len);
> @@ -103,7 +108,6 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
>   			qla82xx_set_reset_owner(vha);
>   			qla8044_idc_unlock(ha);
>   		} else {
> -			ha->fw_dump_mpi = 1;
>   			qla2x00_system_error(vha);
>   		}
>   		break;
> @@ -137,6 +141,22 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
>   			    vha->host_no);
>   		}
>   		break;
> +	case 8:
> +		if (!ha->mpi_fw_dump_reading)
> +			break;
> +		ql_log(ql_log_info, vha, 0x70e7,
> +		       "MPI firmware dump cleared on (%ld).\n", vha->host_no);
> +		ha->mpi_fw_dump_reading = 0;
> +		ha->mpi_fw_dumped = 0;
> +		break;
> +	case 9:
> +		if (ha->mpi_fw_dumped && !ha->mpi_fw_dump_reading) {
> +			ha->mpi_fw_dump_reading = 1;
> +			ql_log(ql_log_info, vha, 0x70e8,
> +			       "Raw MPI firmware dump ready for read on (%ld).\n",
> +			       vha->host_no);
> +		}
> +		break;
>   	}
>   	return count;
>   }
> @@ -706,7 +726,8 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
>   		scsi_unblock_requests(vha->host);
>   		break;
>   	case 0x2025d:
> -		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha))
> +		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
> +		    !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
>   			return -EPERM;
>   
>   		ql_log(ql_log_info, vha, 0x706f,
> @@ -724,6 +745,8 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
>   			qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
>   			qla83xx_idc_unlock(vha, 0);
>   			break;
> +		} else if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
> +			qla27xx_reset_mpi(vha);
>   		} else {
>   			/* Make sure FC side is not in reset */
>   			WARN_ON_ONCE(qla2x00_wait_for_hba_online(vha) !=
> @@ -737,6 +760,7 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
>   			scsi_unblock_requests(vha->host);
>   			break;
>   		}
> +		break;
>   	case 0x2025e:
>   		if (!IS_P3P_TYPE(ha) || vha != base_vha) {
>   			ql_log(ql_log_info, vha, 0x7071,
> diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
> index 47c7a56438b5..daa9e936887b 100644
> --- a/drivers/scsi/qla2xxx/qla_def.h
> +++ b/drivers/scsi/qla2xxx/qla_def.h
> @@ -3223,6 +3223,7 @@ struct isp_operations {
>   		uint32_t);
>   
>   	void (*fw_dump) (struct scsi_qla_host *, int);
> +	void (*mpi_fw_dump)(struct scsi_qla_host *, int);
>   
>   	int (*beacon_on) (struct scsi_qla_host *);
>   	int (*beacon_off) (struct scsi_qla_host *);
> @@ -3748,6 +3749,11 @@ struct qlt_hw_data {
>   
>   #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75	/* 75 percent */
>   
> +struct qla_hw_data_stat {
> +	u32 num_fw_dump;
> +	u32 num_mpi_reset;
> +};
> +
>   /*
>    * Qlogic host adapter specific data structure.
>   */
> @@ -4230,7 +4236,6 @@ struct qla_hw_data {
>   	uint32_t	fw_dump_len;
>   	u32		fw_dump_alloc_len;
>   	bool		fw_dumped;
> -	bool		fw_dump_mpi;
>   	unsigned long	fw_dump_cap_flags;
>   #define RISC_PAUSE_CMPL		0
>   #define DMA_SHUTDOWN_CMPL	1
> @@ -4241,6 +4246,10 @@ struct qla_hw_data {
>   #define ISP_MBX_RDY		6
>   #define ISP_SOFT_RESET_CMPL	7
>   	int		fw_dump_reading;
> +	void		*mpi_fw_dump;
> +	u32		mpi_fw_dump_len;
> +	int		mpi_fw_dump_reading:1;
> +	int		mpi_fw_dumped:1;
>   	int		prev_minidump_failed;
>   	dma_addr_t	eft_dma;
>   	void		*eft;
> @@ -4454,6 +4463,8 @@ struct qla_hw_data {
>   	uint16_t last_zio_threshold;
>   
>   #define DEFAULT_ZIO_THRESHOLD 5
> +
> +	struct qla_hw_data_stat stat;
>   };
>   
>   struct active_regions {
> diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
> index 1b93f5b4d77d..b20c5fa122fb 100644
> --- a/drivers/scsi/qla2xxx/qla_gbl.h
> +++ b/drivers/scsi/qla2xxx/qla_gbl.h
> @@ -173,6 +173,7 @@ extern int ql2xenablemsix;
>   extern int qla2xuseresexchforels;
>   extern int ql2xexlogins;
>   extern int ql2xdifbundlinginternalbuffers;
> +extern int ql2xfulldump_on_mpifail;
>   
>   extern int qla2x00_loop_reset(scsi_qla_host_t *);
>   extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
> @@ -645,6 +646,7 @@ extern void qla82xx_fw_dump(scsi_qla_host_t *, int);
>   extern void qla8044_fw_dump(scsi_qla_host_t *, int);
>   
>   extern void qla27xx_fwdump(scsi_qla_host_t *, int);
> +extern void qla27xx_mpi_fwdump(scsi_qla_host_t *, int);
>   extern ulong qla27xx_fwdt_calculate_dump_size(struct scsi_qla_host *, void *);
>   extern int qla27xx_fwdt_template_valid(void *);
>   extern ulong qla27xx_fwdt_template_size(void *);
> @@ -933,5 +935,6 @@ extern void qla24xx_process_purex_list(struct purex_list *);
>   
>   /* nvme.c */
>   void qla_nvme_unregister_remote_port(struct fc_port *fcport);
> +void qla27xx_reset_mpi(scsi_qla_host_t *vha);
>   void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
>   #endif /* _QLA_GBL_H */
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 5b2deaa730bf..3e9b7a079554 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -3339,6 +3339,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
>   				    dump_size / 1024);
>   
>   				if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
> +					ha->mpi_fw_dump = (char *)fw_dump +
> +						ha->fwdt[1].dump_size;
>   					mutex_unlock(&ha->optrom_mutex);
>   					return;
>   				}
> diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
> index 8d7a905f6247..1cd9d3773cd3 100644
> --- a/drivers/scsi/qla2xxx/qla_isr.c
> +++ b/drivers/scsi/qla2xxx/qla_isr.c
> @@ -757,6 +757,39 @@ qla2x00_find_fcport_by_nportid(scsi_qla_host_t *vha, port_id_t *id,
>   	return NULL;
>   }
>   
> +/* Shall be called only on supported adapters. */
> +static void
> +qla27xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
> +{
> +	struct qla_hw_data *ha = vha->hw;
> +	bool reset_isp_needed = 0;
> +
> +	ql_log(ql_log_warn, vha, 0x02f0,
> +	       "MPI Heartbeat stop. MPI reset is%s needed. "
> +	       "MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
> +	       mb[0] & BIT_8 ? "" : " not",
> +	       mb[0], mb[1], mb[2], mb[3]);
> +
> +	if ((mb[1] & BIT_8) == 0)
> +		return;
> +
> +	ql_log(ql_log_warn, vha, 0x02f1,
> +	       "MPI Heartbeat stop. FW dump needed\n");
> +
> +	if (ql2xfulldump_on_mpifail) {
> +		ha->isp_ops->fw_dump(vha, 1);
> +		reset_isp_needed = 1;
> +	}
> +
> +	ha->isp_ops->mpi_fw_dump(vha, 1);
> +
> +	if (reset_isp_needed) {
> +		vha->hw->flags.fw_init_done = 0;
> +		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
> +		qla2xxx_wake_dpc(vha);
> +	}
> +}
> +
>   /**
>    * qla2x00_async_event() - Process aynchronous events.
>    * @vha: SCSI driver HA context
> @@ -872,9 +905,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
>   			    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n ",
>   			    mb[1], mb[2], mb[3]);
>   
> -		ha->fw_dump_mpi =
> -		    (IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
> -		    RD_REG_WORD(&reg24->mailbox7) & BIT_8;
> +			if ((IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
> +			   RD_REG_WORD(&reg24->mailbox7) & BIT_8)
> +				ha->isp_ops->mpi_fw_dump(vha, 1);
>   		ha->isp_ops->fw_dump(vha, 1);
>   		ha->flags.fw_init_done = 0;
>   		QLA_FW_STOPPED(ha);
> @@ -1375,20 +1408,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
>   
>   	case MBA_IDC_AEN:
>   		if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
> -			ha->flags.fw_init_done = 0;
> -			ql_log(ql_log_warn, vha, 0xffff,
> -			    "MPI Heartbeat stop. Chip reset needed. MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
> -			    mb[0], mb[1], mb[2], mb[3]);
> -
> -			if ((mb[1] & BIT_8) ||
> -			    (mb[2] & BIT_8)) {
> -				ql_log(ql_log_warn, vha, 0xd013,
> -				    "MPI Heartbeat stop. FW dump needed\n");
> -				ha->fw_dump_mpi = 1;
> -				ha->isp_ops->fw_dump(vha, 1);
> -			}
> -			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
> -			qla2xxx_wake_dpc(vha);
> +			qla27xx_handle_8200_aen(vha, mb);
>   		} else if (IS_QLA83XX(ha)) {
>   			mb[4] = RD_REG_WORD(&reg24->mailbox4);
>   			mb[5] = RD_REG_WORD(&reg24->mailbox5);
> diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
> index 3e65b8e9ed47..5ad320f81140 100644
> --- a/drivers/scsi/qla2xxx/qla_os.c
> +++ b/drivers/scsi/qla2xxx/qla_os.c
> @@ -35,6 +35,11 @@ static int apidev_major;
>    */
>   struct kmem_cache *srb_cachep;
>   
> +int ql2xfulldump_on_mpifail;
> +module_param(ql2xfulldump_on_mpifail, int, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(ql2xfulldump_on_mpifail,
> +		 "Set this to take full dump on MPI hang.");
> +
>   /*
>    * CT6 CTX allocation cache
>    */
> @@ -2518,6 +2523,7 @@ static struct isp_operations qla27xx_isp_ops = {
>   	.read_nvram		= NULL,
>   	.write_nvram		= NULL,
>   	.fw_dump		= qla27xx_fwdump,
> +	.mpi_fw_dump		= qla27xx_mpi_fwdump,
>   	.beacon_on		= qla24xx_beacon_on,
>   	.beacon_off		= qla24xx_beacon_off,
>   	.beacon_blink		= qla83xx_beacon_blink,
> diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
> index 6aeb1c3fb7a8..deb490cb90f0 100644
> --- a/drivers/scsi/qla2xxx/qla_tmpl.c
> +++ b/drivers/scsi/qla2xxx/qla_tmpl.c
> @@ -12,6 +12,33 @@
>   #define IOBASE(vha)	IOBAR(ISPREG(vha))
>   #define INVALID_ENTRY ((struct qla27xx_fwdt_entry *)0xffffffffffffffffUL)
>   
> +/* hardware_lock assumed held. */
> +static void
> +qla27xx_write_remote_reg(struct scsi_qla_host *vha,
> +			 u32 addr, u32 data)
> +{
> +	char *reg = (char *)ISPREG(vha);
> +
> +	ql_dbg(ql_dbg_misc, vha, 0xd300,
> +	       "%s: addr/data = %xh/%xh\n", __func__, addr, data);
> +
> +	WRT_REG_DWORD(reg + IOBASE(vha), 0x40);
> +	WRT_REG_DWORD(reg + 0xc4, data);
> +	WRT_REG_DWORD(reg + 0xc0, addr);
> +}
> +
> +void
> +qla27xx_reset_mpi(scsi_qla_host_t *vha)
> +{
> +	ql_dbg(ql_dbg_misc + ql_dbg_verbose, vha, 0xd301,
> +	       "Entered %s.\n", __func__);
> +
> +	qla27xx_write_remote_reg(vha, 0x104050, 0x40004);
> +	qla27xx_write_remote_reg(vha, 0x10405c, 0x4);
> +
> +	vha->hw->stat.num_mpi_reset++;
> +}
> +
>   static inline void
>   qla27xx_insert16(uint16_t value, void *buf, ulong *len)
>   {
> @@ -997,6 +1024,62 @@ qla27xx_fwdt_template_valid(void *p)
>   	return true;
>   }
>   
> +void
> +qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked)
> +{
> +	ulong flags = 0;
> +	bool need_mpi_reset = 1;
> +
> +#ifndef __CHECKER__
> +	if (!hardware_locked)
> +		spin_lock_irqsave(&vha->hw->hardware_lock, flags);
> +#endif
> +	if (!vha->hw->mpi_fw_dump) {
> +		ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n");
> +	} else if (vha->hw->mpi_fw_dumped) {
> +		ql_log(ql_log_warn, vha, 0x02f4,
> +		       "-> MPI firmware already dumped (%p) -- ignoring request\n",
> +		       vha->hw->mpi_fw_dump);
> +	} else {
> +		struct fwdt *fwdt = &vha->hw->fwdt[1];
> +		ulong len;
> +		void *buf = vha->hw->mpi_fw_dump;
> +
> +		ql_log(ql_log_warn, vha, 0x02f5, "-> fwdt1 running...\n");
> +		if (!fwdt->template) {
> +			ql_log(ql_log_warn, vha, 0x02f6,
> +			       "-> fwdt1 no template\n");
> +			goto bailout;
> +		}
> +		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
> +		if (len == 0) {
> +			goto bailout;
> +		} else if (len != fwdt->dump_size) {
> +			ql_log(ql_log_warn, vha, 0x02f7,
> +			       "-> fwdt1 fwdump residual=%+ld\n",
> +			       fwdt->dump_size - len);
> +		} else {
> +			need_mpi_reset = 0;
> +		}
> +
> +		vha->hw->mpi_fw_dump_len = len;
> +		vha->hw->mpi_fw_dumped = 1;
> +
> +		ql_log(ql_log_warn, vha, 0x02f8,
> +		       "-> MPI firmware dump saved to buffer (%lu/%p)\n",
> +		       vha->host_no, vha->hw->mpi_fw_dump);
> +		qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
> +	}
> +
> +bailout:
> +	if (need_mpi_reset)
> +		qla27xx_reset_mpi(vha);
> +#ifndef __CHECKER__
> +	if (!hardware_locked)
> +		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
> +#endif
> +}
> +
>   void
>   qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
>   {
> @@ -1015,30 +1098,26 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
>   		    vha->hw->fw_dump);
>   	} else {
>   		struct fwdt *fwdt = vha->hw->fwdt;
> -		uint j;
>   		ulong len;
>   		void *buf = vha->hw->fw_dump;
>   		uint count = vha->hw->fw_dump_mpi ? 2 : 1;
>   
> -		for (j = 0; j < count; j++, fwdt++, buf += len) {
> -			ql_log(ql_log_warn, vha, 0xd011,
> -			    "-> fwdt%u running...\n", j);
> -			if (!fwdt->template) {
> -				ql_log(ql_log_warn, vha, 0xd012,
> -				    "-> fwdt%u no template\n", j);
> -				break;
> -			}
> -			len = qla27xx_execute_fwdt_template(vha,
> -			    fwdt->template, buf);
> -			if (len == 0) {
> -				goto bailout;
> -			} else if (len != fwdt->dump_size) {
> -				ql_log(ql_log_warn, vha, 0xd013,
> -				    "-> fwdt%u fwdump residual=%+ld\n",
> -				    j, fwdt->dump_size - len);
> -			}
> +		ql_log(ql_log_warn, vha, 0xd011, "-> fwdt0 running...\n");
> +		if (!fwdt->template) {
> +			ql_log(ql_log_warn, vha, 0xd012,
> +			       "-> fwdt0 no template\n");
> +			goto bailout;
>   		}
> -		vha->hw->fw_dump_len = buf - (void *)vha->hw->fw_dump;
> +		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
> +		if (len == 0) {
> +			goto bailout;
> +		} else if (len != fwdt->dump_size) {
> +			ql_log(ql_log_warn, vha, 0xd013,
> +			       "-> fwdt0 fwdump residual=%+ld\n",
> +				fwdt->dump_size - len);
> +		}
> +
> +		vha->hw->fw_dump_len = len;
>   		vha->hw->fw_dumped = 1;
>   
>   		ql_log(ql_log_warn, vha, 0xd015,
> @@ -1048,7 +1127,6 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
>   	}
>   
>   bailout:
> -	vha->hw->fw_dump_mpi = 0;
>   #ifndef __CHECKER__
>   	if (!hardware_locked)
>   		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
> 

Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Himanshu Madhani March 30, 2020, 1:42 p.m. UTC | #2
On 3/27/2020 9:20 AM, Himanshu Madhani wrote:
> On 3/27/2020 5:27 AM, Nilesh Javali wrote:
>> From: Arun Easi <aeasi@marvell.com>
>>
>> Today, upon an MPI failure AEN, on top of collecting an MPI dump, a
>> regular firmware dump is also taken and the chip reset. This is
>> disruptive to IOs and not required. So, make the firmware dump
>> collection, followed by chip reset optional (not done by default).
>>
>> Firmware dump buffer and MPI dump buffer are independent of each
>> other with this change and each can have dump that was taken at two
>> different times for two different issues. The MPI dump is saved in a
>> separate buffer and is retrieved differently from firmware dump.
>>
>> To collect full dump on MPI failure AEN, a module parameter is
>> introduced:
>>      ql2xfulldump_on_mpifail (default: 0)
>>
>> Signed-off-by: Arun Easi <aeasi@marvell.com>
>> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
>> Signed-off-by: Nilesh Javali <njavali@marvell.com>
>> ---
>>   drivers/scsi/qla2xxx/qla_attr.c |  30 +++++++-
>>   drivers/scsi/qla2xxx/qla_def.h  |  13 +++-
>>   drivers/scsi/qla2xxx/qla_gbl.h  |   3 +
>>   drivers/scsi/qla2xxx/qla_init.c |   2 +
>>   drivers/scsi/qla2xxx/qla_isr.c  |  54 ++++++++++-----
>>   drivers/scsi/qla2xxx/qla_os.c   |   6 ++
>>   drivers/scsi/qla2xxx/qla_tmpl.c | 118 ++++++++++++++++++++++++++------
>>   7 files changed, 185 insertions(+), 41 deletions(-)
>>
>> diff --git a/drivers/scsi/qla2xxx/qla_attr.c 
>> b/drivers/scsi/qla2xxx/qla_attr.c
>> index 97cabd7e0014..3a5f6f27587e 100644
>> --- a/drivers/scsi/qla2xxx/qla_attr.c
>> +++ b/drivers/scsi/qla2xxx/qla_attr.c
>> @@ -26,7 +26,8 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct 
>> kobject *kobj,
>>       struct qla_hw_data *ha = vha->hw;
>>       int rval = 0;
>> -    if (!(ha->fw_dump_reading || ha->mctp_dump_reading))
>> +    if (!(ha->fw_dump_reading || ha->mctp_dump_reading ||
>> +          ha->mpi_fw_dump_reading))
>>           return 0;
>>       mutex_lock(&ha->optrom_mutex);
>> @@ -42,6 +43,10 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, 
>> struct kobject *kobj,
>>       } else if (ha->mctp_dumped && ha->mctp_dump_reading) {
>>           rval = memory_read_from_buffer(buf, count, &off, ha->mctp_dump,
>>               MCTP_DUMP_SIZE);
>> +    } else if (ha->mpi_fw_dumped && ha->mpi_fw_dump_reading) {
>> +        rval = memory_read_from_buffer(buf, count, &off,
>> +                           ha->mpi_fw_dump,
>> +                           ha->mpi_fw_dump_len);
>>       } else if (ha->fw_dump_reading) {
>>           rval = memory_read_from_buffer(buf, count, &off, ha->fw_dump,
>>                       ha->fw_dump_len);
>> @@ -103,7 +108,6 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, 
>> struct kobject *kobj,
>>               qla82xx_set_reset_owner(vha);
>>               qla8044_idc_unlock(ha);
>>           } else {
>> -            ha->fw_dump_mpi = 1;
>>               qla2x00_system_error(vha);
>>           }
>>           break;
>> @@ -137,6 +141,22 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, 
>> struct kobject *kobj,
>>                   vha->host_no);
>>           }
>>           break;
>> +    case 8:
>> +        if (!ha->mpi_fw_dump_reading)
>> +            break;
>> +        ql_log(ql_log_info, vha, 0x70e7,
>> +               "MPI firmware dump cleared on (%ld).\n", vha->host_no);
>> +        ha->mpi_fw_dump_reading = 0;
>> +        ha->mpi_fw_dumped = 0;
>> +        break;
>> +    case 9:
>> +        if (ha->mpi_fw_dumped && !ha->mpi_fw_dump_reading) {
>> +            ha->mpi_fw_dump_reading = 1;
>> +            ql_log(ql_log_info, vha, 0x70e8,
>> +                   "Raw MPI firmware dump ready for read on (%ld).\n",
>> +                   vha->host_no);
>> +        }
>> +        break;
>>       }
>>       return count;
>>   }
>> @@ -706,7 +726,8 @@ qla2x00_sysfs_write_reset(struct file *filp, 
>> struct kobject *kobj,
>>           scsi_unblock_requests(vha->host);
>>           break;
>>       case 0x2025d:
>> -        if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha))
>> +        if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
>> +            !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
>>               return -EPERM;
>>           ql_log(ql_log_info, vha, 0x706f,
>> @@ -724,6 +745,8 @@ qla2x00_sysfs_write_reset(struct file *filp, 
>> struct kobject *kobj,
>>               qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
>>               qla83xx_idc_unlock(vha, 0);
>>               break;
>> +        } else if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
>> +            qla27xx_reset_mpi(vha);
>>           } else {
>>               /* Make sure FC side is not in reset */
>>               WARN_ON_ONCE(qla2x00_wait_for_hba_online(vha) !=
>> @@ -737,6 +760,7 @@ qla2x00_sysfs_write_reset(struct file *filp, 
>> struct kobject *kobj,
>>               scsi_unblock_requests(vha->host);
>>               break;
>>           }
>> +        break;
>>       case 0x2025e:
>>           if (!IS_P3P_TYPE(ha) || vha != base_vha) {
>>               ql_log(ql_log_info, vha, 0x7071,
>> diff --git a/drivers/scsi/qla2xxx/qla_def.h 
>> b/drivers/scsi/qla2xxx/qla_def.h
>> index 47c7a56438b5..daa9e936887b 100644
>> --- a/drivers/scsi/qla2xxx/qla_def.h
>> +++ b/drivers/scsi/qla2xxx/qla_def.h
>> @@ -3223,6 +3223,7 @@ struct isp_operations {
>>           uint32_t);
>>       void (*fw_dump) (struct scsi_qla_host *, int);
>> +    void (*mpi_fw_dump)(struct scsi_qla_host *, int);
>>       int (*beacon_on) (struct scsi_qla_host *);
>>       int (*beacon_off) (struct scsi_qla_host *);
>> @@ -3748,6 +3749,11 @@ struct qlt_hw_data {
>>   #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75    /* 75 percent */
>> +struct qla_hw_data_stat {
>> +    u32 num_fw_dump;
>> +    u32 num_mpi_reset;
>> +};
>> +
>>   /*
>>    * Qlogic host adapter specific data structure.
>>   */
>> @@ -4230,7 +4236,6 @@ struct qla_hw_data {
>>       uint32_t    fw_dump_len;
>>       u32        fw_dump_alloc_len;
>>       bool        fw_dumped;
>> -    bool        fw_dump_mpi;
>>       unsigned long    fw_dump_cap_flags;
>>   #define RISC_PAUSE_CMPL        0
>>   #define DMA_SHUTDOWN_CMPL    1
>> @@ -4241,6 +4246,10 @@ struct qla_hw_data {
>>   #define ISP_MBX_RDY        6
>>   #define ISP_SOFT_RESET_CMPL    7
>>       int        fw_dump_reading;
>> +    void        *mpi_fw_dump;
>> +    u32        mpi_fw_dump_len;
>> +    int        mpi_fw_dump_reading:1;
>> +    int        mpi_fw_dumped:1;
>>       int        prev_minidump_failed;
>>       dma_addr_t    eft_dma;
>>       void        *eft;
>> @@ -4454,6 +4463,8 @@ struct qla_hw_data {
>>       uint16_t last_zio_threshold;
>>   #define DEFAULT_ZIO_THRESHOLD 5
>> +
>> +    struct qla_hw_data_stat stat;
>>   };
>>   struct active_regions {
>> diff --git a/drivers/scsi/qla2xxx/qla_gbl.h 
>> b/drivers/scsi/qla2xxx/qla_gbl.h
>> index 1b93f5b4d77d..b20c5fa122fb 100644
>> --- a/drivers/scsi/qla2xxx/qla_gbl.h
>> +++ b/drivers/scsi/qla2xxx/qla_gbl.h
>> @@ -173,6 +173,7 @@ extern int ql2xenablemsix;
>>   extern int qla2xuseresexchforels;
>>   extern int ql2xexlogins;
>>   extern int ql2xdifbundlinginternalbuffers;
>> +extern int ql2xfulldump_on_mpifail;
>>   extern int qla2x00_loop_reset(scsi_qla_host_t *);
>>   extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
>> @@ -645,6 +646,7 @@ extern void qla82xx_fw_dump(scsi_qla_host_t *, int);
>>   extern void qla8044_fw_dump(scsi_qla_host_t *, int);
>>   extern void qla27xx_fwdump(scsi_qla_host_t *, int);
>> +extern void qla27xx_mpi_fwdump(scsi_qla_host_t *, int);
>>   extern ulong qla27xx_fwdt_calculate_dump_size(struct scsi_qla_host 
>> *, void *);
>>   extern int qla27xx_fwdt_template_valid(void *);
>>   extern ulong qla27xx_fwdt_template_size(void *);
>> @@ -933,5 +935,6 @@ extern void qla24xx_process_purex_list(struct 
>> purex_list *);
>>   /* nvme.c */
>>   void qla_nvme_unregister_remote_port(struct fc_port *fcport);
>> +void qla27xx_reset_mpi(scsi_qla_host_t *vha);
>>   void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct 
>> event_arg *ea);
>>   #endif /* _QLA_GBL_H */
>> diff --git a/drivers/scsi/qla2xxx/qla_init.c 
>> b/drivers/scsi/qla2xxx/qla_init.c
>> index 5b2deaa730bf..3e9b7a079554 100644
>> --- a/drivers/scsi/qla2xxx/qla_init.c
>> +++ b/drivers/scsi/qla2xxx/qla_init.c
>> @@ -3339,6 +3339,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
>>                       dump_size / 1024);
>>                   if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
>> +                    ha->mpi_fw_dump = (char *)fw_dump +
>> +                        ha->fwdt[1].dump_size;
>>                       mutex_unlock(&ha->optrom_mutex);
>>                       return;
>>                   }
>> diff --git a/drivers/scsi/qla2xxx/qla_isr.c 
>> b/drivers/scsi/qla2xxx/qla_isr.c
>> index 8d7a905f6247..1cd9d3773cd3 100644
>> --- a/drivers/scsi/qla2xxx/qla_isr.c
>> +++ b/drivers/scsi/qla2xxx/qla_isr.c
>> @@ -757,6 +757,39 @@ qla2x00_find_fcport_by_nportid(scsi_qla_host_t 
>> *vha, port_id_t *id,
>>       return NULL;
>>   }
>> +/* Shall be called only on supported adapters. */
>> +static void
>> +qla27xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
>> +{
>> +    struct qla_hw_data *ha = vha->hw;
>> +    bool reset_isp_needed = 0;
>> +
>> +    ql_log(ql_log_warn, vha, 0x02f0,
>> +           "MPI Heartbeat stop. MPI reset is%s needed. "
>> +           "MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
>> +           mb[0] & BIT_8 ? "" : " not",
>> +           mb[0], mb[1], mb[2], mb[3]);
>> +
>> +    if ((mb[1] & BIT_8) == 0)
>> +        return;
>> +
>> +    ql_log(ql_log_warn, vha, 0x02f1,
>> +           "MPI Heartbeat stop. FW dump needed\n");
>> +
>> +    if (ql2xfulldump_on_mpifail) {
>> +        ha->isp_ops->fw_dump(vha, 1);
>> +        reset_isp_needed = 1;
>> +    }
>> +
>> +    ha->isp_ops->mpi_fw_dump(vha, 1);
>> +
>> +    if (reset_isp_needed) {
>> +        vha->hw->flags.fw_init_done = 0;
>> +        set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
>> +        qla2xxx_wake_dpc(vha);
>> +    }
>> +}
>> +
>>   /**
>>    * qla2x00_async_event() - Process aynchronous events.
>>    * @vha: SCSI driver HA context
>> @@ -872,9 +905,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct 
>> rsp_que *rsp, uint16_t *mb)
>>                   "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n ",
>>                   mb[1], mb[2], mb[3]);
>> -        ha->fw_dump_mpi =
>> -            (IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
>> -            RD_REG_WORD(&reg24->mailbox7) & BIT_8;
>> +            if ((IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
>> +               RD_REG_WORD(&reg24->mailbox7) & BIT_8)
>> +                ha->isp_ops->mpi_fw_dump(vha, 1);
>>           ha->isp_ops->fw_dump(vha, 1);
>>           ha->flags.fw_init_done = 0;
>>           QLA_FW_STOPPED(ha);
>> @@ -1375,20 +1408,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, 
>> struct rsp_que *rsp, uint16_t *mb)
>>       case MBA_IDC_AEN:
>>           if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
>> -            ha->flags.fw_init_done = 0;
>> -            ql_log(ql_log_warn, vha, 0xffff,
>> -                "MPI Heartbeat stop. Chip reset needed. MB0[%xh] 
>> MB1[%xh] MB2[%xh] MB3[%xh]\n",
>> -                mb[0], mb[1], mb[2], mb[3]);
>> -
>> -            if ((mb[1] & BIT_8) ||
>> -                (mb[2] & BIT_8)) {
>> -                ql_log(ql_log_warn, vha, 0xd013,
>> -                    "MPI Heartbeat stop. FW dump needed\n");
>> -                ha->fw_dump_mpi = 1;
>> -                ha->isp_ops->fw_dump(vha, 1);
>> -            }
>> -            set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
>> -            qla2xxx_wake_dpc(vha);
>> +            qla27xx_handle_8200_aen(vha, mb);
>>           } else if (IS_QLA83XX(ha)) {
>>               mb[4] = RD_REG_WORD(&reg24->mailbox4);
>>               mb[5] = RD_REG_WORD(&reg24->mailbox5);
>> diff --git a/drivers/scsi/qla2xxx/qla_os.c 
>> b/drivers/scsi/qla2xxx/qla_os.c
>> index 3e65b8e9ed47..5ad320f81140 100644
>> --- a/drivers/scsi/qla2xxx/qla_os.c
>> +++ b/drivers/scsi/qla2xxx/qla_os.c
>> @@ -35,6 +35,11 @@ static int apidev_major;
>>    */
>>   struct kmem_cache *srb_cachep;
>> +int ql2xfulldump_on_mpifail;
>> +module_param(ql2xfulldump_on_mpifail, int, S_IRUGO | S_IWUSR);
>> +MODULE_PARM_DESC(ql2xfulldump_on_mpifail,
>> +         "Set this to take full dump on MPI hang.");
>> +
>>   /*
>>    * CT6 CTX allocation cache
>>    */
>> @@ -2518,6 +2523,7 @@ static struct isp_operations qla27xx_isp_ops = {
>>       .read_nvram        = NULL,
>>       .write_nvram        = NULL,
>>       .fw_dump        = qla27xx_fwdump,
>> +    .mpi_fw_dump        = qla27xx_mpi_fwdump,
>>       .beacon_on        = qla24xx_beacon_on,
>>       .beacon_off        = qla24xx_beacon_off,
>>       .beacon_blink        = qla83xx_beacon_blink,
>> diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c 
>> b/drivers/scsi/qla2xxx/qla_tmpl.c
>> index 6aeb1c3fb7a8..deb490cb90f0 100644
>> --- a/drivers/scsi/qla2xxx/qla_tmpl.c
>> +++ b/drivers/scsi/qla2xxx/qla_tmpl.c
>> @@ -12,6 +12,33 @@
>>   #define IOBASE(vha)    IOBAR(ISPREG(vha))
>>   #define INVALID_ENTRY ((struct qla27xx_fwdt_entry 
>> *)0xffffffffffffffffUL)
>> +/* hardware_lock assumed held. */
>> +static void
>> +qla27xx_write_remote_reg(struct scsi_qla_host *vha,
>> +             u32 addr, u32 data)
>> +{
>> +    char *reg = (char *)ISPREG(vha);
>> +
>> +    ql_dbg(ql_dbg_misc, vha, 0xd300,
>> +           "%s: addr/data = %xh/%xh\n", __func__, addr, data);
>> +
>> +    WRT_REG_DWORD(reg + IOBASE(vha), 0x40);
>> +    WRT_REG_DWORD(reg + 0xc4, data);
>> +    WRT_REG_DWORD(reg + 0xc0, addr);
>> +}
>> +
>> +void
>> +qla27xx_reset_mpi(scsi_qla_host_t *vha)
>> +{
>> +    ql_dbg(ql_dbg_misc + ql_dbg_verbose, vha, 0xd301,
>> +           "Entered %s.\n", __func__);
>> +
>> +    qla27xx_write_remote_reg(vha, 0x104050, 0x40004);
>> +    qla27xx_write_remote_reg(vha, 0x10405c, 0x4);
>> +
>> +    vha->hw->stat.num_mpi_reset++;
>> +}
>> +
>>   static inline void
>>   qla27xx_insert16(uint16_t value, void *buf, ulong *len)
>>   {
>> @@ -997,6 +1024,62 @@ qla27xx_fwdt_template_valid(void *p)
>>       return true;
>>   }
>> +void
>> +qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked)
>> +{
>> +    ulong flags = 0;
>> +    bool need_mpi_reset = 1;
>> +
>> +#ifndef __CHECKER__
>> +    if (!hardware_locked)
>> +        spin_lock_irqsave(&vha->hw->hardware_lock, flags);
>> +#endif
>> +    if (!vha->hw->mpi_fw_dump) {
>> +        ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n");
>> +    } else if (vha->hw->mpi_fw_dumped) {
>> +        ql_log(ql_log_warn, vha, 0x02f4,
>> +               "-> MPI firmware already dumped (%p) -- ignoring 
>> request\n",
>> +               vha->hw->mpi_fw_dump);
>> +    } else {
>> +        struct fwdt *fwdt = &vha->hw->fwdt[1];
>> +        ulong len;
>> +        void *buf = vha->hw->mpi_fw_dump;
>> +
>> +        ql_log(ql_log_warn, vha, 0x02f5, "-> fwdt1 running...\n");
>> +        if (!fwdt->template) {
>> +            ql_log(ql_log_warn, vha, 0x02f6,
>> +                   "-> fwdt1 no template\n");
>> +            goto bailout;
>> +        }
>> +        len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
>> +        if (len == 0) {
>> +            goto bailout;
>> +        } else if (len != fwdt->dump_size) {
>> +            ql_log(ql_log_warn, vha, 0x02f7,
>> +                   "-> fwdt1 fwdump residual=%+ld\n",
>> +                   fwdt->dump_size - len);
>> +        } else {
>> +            need_mpi_reset = 0;
>> +        }
>> +
>> +        vha->hw->mpi_fw_dump_len = len;
>> +        vha->hw->mpi_fw_dumped = 1;
>> +
>> +        ql_log(ql_log_warn, vha, 0x02f8,
>> +               "-> MPI firmware dump saved to buffer (%lu/%p)\n",
>> +               vha->host_no, vha->hw->mpi_fw_dump);
>> +        qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
>> +    }
>> +
>> +bailout:
>> +    if (need_mpi_reset)
>> +        qla27xx_reset_mpi(vha);
>> +#ifndef __CHECKER__
>> +    if (!hardware_locked)
>> +        spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
>> +#endif
>> +}
>> +
>>   void
>>   qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
>>   {
>> @@ -1015,30 +1098,26 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int 
>> hardware_locked)
>>               vha->hw->fw_dump);
>>       } else {
>>           struct fwdt *fwdt = vha->hw->fwdt;
>> -        uint j;
>>           ulong len;
>>           void *buf = vha->hw->fw_dump;
>>           uint count = vha->hw->fw_dump_mpi ? 2 : 1;
>> -        for (j = 0; j < count; j++, fwdt++, buf += len) {
>> -            ql_log(ql_log_warn, vha, 0xd011,
>> -                "-> fwdt%u running...\n", j);
>> -            if (!fwdt->template) {
>> -                ql_log(ql_log_warn, vha, 0xd012,
>> -                    "-> fwdt%u no template\n", j);
>> -                break;
>> -            }
>> -            len = qla27xx_execute_fwdt_template(vha,
>> -                fwdt->template, buf);
>> -            if (len == 0) {
>> -                goto bailout;
>> -            } else if (len != fwdt->dump_size) {
>> -                ql_log(ql_log_warn, vha, 0xd013,
>> -                    "-> fwdt%u fwdump residual=%+ld\n",
>> -                    j, fwdt->dump_size - len);
>> -            }
>> +        ql_log(ql_log_warn, vha, 0xd011, "-> fwdt0 running...\n");
>> +        if (!fwdt->template) {
>> +            ql_log(ql_log_warn, vha, 0xd012,
>> +                   "-> fwdt0 no template\n");
>> +            goto bailout;
>>           }
>> -        vha->hw->fw_dump_len = buf - (void *)vha->hw->fw_dump;
>> +        len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
>> +        if (len == 0) {
>> +            goto bailout;
>> +        } else if (len != fwdt->dump_size) {
>> +            ql_log(ql_log_warn, vha, 0xd013,
>> +                   "-> fwdt0 fwdump residual=%+ld\n",
>> +                fwdt->dump_size - len);
>> +        }
>> +
>> +        vha->hw->fw_dump_len = len;
>>           vha->hw->fw_dumped = 1;
>>           ql_log(ql_log_warn, vha, 0xd015,
>> @@ -1048,7 +1127,6 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int 
>> hardware_locked)
>>       }
>>   bailout:
>> -    vha->hw->fw_dump_mpi = 0;
>>   #ifndef __CHECKER__
>>       if (!hardware_locked)
>>           spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
>>
> 
> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>

Nilesh,

FYI, I have reviewed 1/3 as well so please go ahead add my reviewed-by tag.

Thanks,
- Himanshu
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 97cabd7e0014..3a5f6f27587e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -26,7 +26,8 @@  qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
 	struct qla_hw_data *ha = vha->hw;
 	int rval = 0;
 
-	if (!(ha->fw_dump_reading || ha->mctp_dump_reading))
+	if (!(ha->fw_dump_reading || ha->mctp_dump_reading ||
+	      ha->mpi_fw_dump_reading))
 		return 0;
 
 	mutex_lock(&ha->optrom_mutex);
@@ -42,6 +43,10 @@  qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
 	} else if (ha->mctp_dumped && ha->mctp_dump_reading) {
 		rval = memory_read_from_buffer(buf, count, &off, ha->mctp_dump,
 		    MCTP_DUMP_SIZE);
+	} else if (ha->mpi_fw_dumped && ha->mpi_fw_dump_reading) {
+		rval = memory_read_from_buffer(buf, count, &off,
+					       ha->mpi_fw_dump,
+					       ha->mpi_fw_dump_len);
 	} else if (ha->fw_dump_reading) {
 		rval = memory_read_from_buffer(buf, count, &off, ha->fw_dump,
 					ha->fw_dump_len);
@@ -103,7 +108,6 @@  qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 			qla82xx_set_reset_owner(vha);
 			qla8044_idc_unlock(ha);
 		} else {
-			ha->fw_dump_mpi = 1;
 			qla2x00_system_error(vha);
 		}
 		break;
@@ -137,6 +141,22 @@  qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 			    vha->host_no);
 		}
 		break;
+	case 8:
+		if (!ha->mpi_fw_dump_reading)
+			break;
+		ql_log(ql_log_info, vha, 0x70e7,
+		       "MPI firmware dump cleared on (%ld).\n", vha->host_no);
+		ha->mpi_fw_dump_reading = 0;
+		ha->mpi_fw_dumped = 0;
+		break;
+	case 9:
+		if (ha->mpi_fw_dumped && !ha->mpi_fw_dump_reading) {
+			ha->mpi_fw_dump_reading = 1;
+			ql_log(ql_log_info, vha, 0x70e8,
+			       "Raw MPI firmware dump ready for read on (%ld).\n",
+			       vha->host_no);
+		}
+		break;
 	}
 	return count;
 }
@@ -706,7 +726,8 @@  qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 		scsi_unblock_requests(vha->host);
 		break;
 	case 0x2025d:
-		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha))
+		if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
+		    !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
 			return -EPERM;
 
 		ql_log(ql_log_info, vha, 0x706f,
@@ -724,6 +745,8 @@  qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 			qla83xx_idc_audit(vha, IDC_AUDIT_TIMESTAMP);
 			qla83xx_idc_unlock(vha, 0);
 			break;
+		} else if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+			qla27xx_reset_mpi(vha);
 		} else {
 			/* Make sure FC side is not in reset */
 			WARN_ON_ONCE(qla2x00_wait_for_hba_online(vha) !=
@@ -737,6 +760,7 @@  qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 			scsi_unblock_requests(vha->host);
 			break;
 		}
+		break;
 	case 0x2025e:
 		if (!IS_P3P_TYPE(ha) || vha != base_vha) {
 			ql_log(ql_log_info, vha, 0x7071,
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 47c7a56438b5..daa9e936887b 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3223,6 +3223,7 @@  struct isp_operations {
 		uint32_t);
 
 	void (*fw_dump) (struct scsi_qla_host *, int);
+	void (*mpi_fw_dump)(struct scsi_qla_host *, int);
 
 	int (*beacon_on) (struct scsi_qla_host *);
 	int (*beacon_off) (struct scsi_qla_host *);
@@ -3748,6 +3749,11 @@  struct qlt_hw_data {
 
 #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75	/* 75 percent */
 
+struct qla_hw_data_stat {
+	u32 num_fw_dump;
+	u32 num_mpi_reset;
+};
+
 /*
  * Qlogic host adapter specific data structure.
 */
@@ -4230,7 +4236,6 @@  struct qla_hw_data {
 	uint32_t	fw_dump_len;
 	u32		fw_dump_alloc_len;
 	bool		fw_dumped;
-	bool		fw_dump_mpi;
 	unsigned long	fw_dump_cap_flags;
 #define RISC_PAUSE_CMPL		0
 #define DMA_SHUTDOWN_CMPL	1
@@ -4241,6 +4246,10 @@  struct qla_hw_data {
 #define ISP_MBX_RDY		6
 #define ISP_SOFT_RESET_CMPL	7
 	int		fw_dump_reading;
+	void		*mpi_fw_dump;
+	u32		mpi_fw_dump_len;
+	int		mpi_fw_dump_reading:1;
+	int		mpi_fw_dumped:1;
 	int		prev_minidump_failed;
 	dma_addr_t	eft_dma;
 	void		*eft;
@@ -4454,6 +4463,8 @@  struct qla_hw_data {
 	uint16_t last_zio_threshold;
 
 #define DEFAULT_ZIO_THRESHOLD 5
+
+	struct qla_hw_data_stat stat;
 };
 
 struct active_regions {
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 1b93f5b4d77d..b20c5fa122fb 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -173,6 +173,7 @@  extern int ql2xenablemsix;
 extern int qla2xuseresexchforels;
 extern int ql2xexlogins;
 extern int ql2xdifbundlinginternalbuffers;
+extern int ql2xfulldump_on_mpifail;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -645,6 +646,7 @@  extern void qla82xx_fw_dump(scsi_qla_host_t *, int);
 extern void qla8044_fw_dump(scsi_qla_host_t *, int);
 
 extern void qla27xx_fwdump(scsi_qla_host_t *, int);
+extern void qla27xx_mpi_fwdump(scsi_qla_host_t *, int);
 extern ulong qla27xx_fwdt_calculate_dump_size(struct scsi_qla_host *, void *);
 extern int qla27xx_fwdt_template_valid(void *);
 extern ulong qla27xx_fwdt_template_size(void *);
@@ -933,5 +935,6 @@  extern void qla24xx_process_purex_list(struct purex_list *);
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);
+void qla27xx_reset_mpi(scsi_qla_host_t *vha);
 void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5b2deaa730bf..3e9b7a079554 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3339,6 +3339,8 @@  qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 				    dump_size / 1024);
 
 				if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+					ha->mpi_fw_dump = (char *)fw_dump +
+						ha->fwdt[1].dump_size;
 					mutex_unlock(&ha->optrom_mutex);
 					return;
 				}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8d7a905f6247..1cd9d3773cd3 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -757,6 +757,39 @@  qla2x00_find_fcport_by_nportid(scsi_qla_host_t *vha, port_id_t *id,
 	return NULL;
 }
 
+/* Shall be called only on supported adapters. */
+static void
+qla27xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	struct qla_hw_data *ha = vha->hw;
+	bool reset_isp_needed = 0;
+
+	ql_log(ql_log_warn, vha, 0x02f0,
+	       "MPI Heartbeat stop. MPI reset is%s needed. "
+	       "MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
+	       mb[0] & BIT_8 ? "" : " not",
+	       mb[0], mb[1], mb[2], mb[3]);
+
+	if ((mb[1] & BIT_8) == 0)
+		return;
+
+	ql_log(ql_log_warn, vha, 0x02f1,
+	       "MPI Heartbeat stop. FW dump needed\n");
+
+	if (ql2xfulldump_on_mpifail) {
+		ha->isp_ops->fw_dump(vha, 1);
+		reset_isp_needed = 1;
+	}
+
+	ha->isp_ops->mpi_fw_dump(vha, 1);
+
+	if (reset_isp_needed) {
+		vha->hw->flags.fw_init_done = 0;
+		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		qla2xxx_wake_dpc(vha);
+	}
+}
+
 /**
  * qla2x00_async_event() - Process aynchronous events.
  * @vha: SCSI driver HA context
@@ -872,9 +905,9 @@  qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 			    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n ",
 			    mb[1], mb[2], mb[3]);
 
-		ha->fw_dump_mpi =
-		    (IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
-		    RD_REG_WORD(&reg24->mailbox7) & BIT_8;
+			if ((IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
+			   RD_REG_WORD(&reg24->mailbox7) & BIT_8)
+				ha->isp_ops->mpi_fw_dump(vha, 1);
 		ha->isp_ops->fw_dump(vha, 1);
 		ha->flags.fw_init_done = 0;
 		QLA_FW_STOPPED(ha);
@@ -1375,20 +1408,7 @@  qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 
 	case MBA_IDC_AEN:
 		if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-			ha->flags.fw_init_done = 0;
-			ql_log(ql_log_warn, vha, 0xffff,
-			    "MPI Heartbeat stop. Chip reset needed. MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
-			    mb[0], mb[1], mb[2], mb[3]);
-
-			if ((mb[1] & BIT_8) ||
-			    (mb[2] & BIT_8)) {
-				ql_log(ql_log_warn, vha, 0xd013,
-				    "MPI Heartbeat stop. FW dump needed\n");
-				ha->fw_dump_mpi = 1;
-				ha->isp_ops->fw_dump(vha, 1);
-			}
-			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-			qla2xxx_wake_dpc(vha);
+			qla27xx_handle_8200_aen(vha, mb);
 		} else if (IS_QLA83XX(ha)) {
 			mb[4] = RD_REG_WORD(&reg24->mailbox4);
 			mb[5] = RD_REG_WORD(&reg24->mailbox5);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3e65b8e9ed47..5ad320f81140 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -35,6 +35,11 @@  static int apidev_major;
  */
 struct kmem_cache *srb_cachep;
 
+int ql2xfulldump_on_mpifail;
+module_param(ql2xfulldump_on_mpifail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ql2xfulldump_on_mpifail,
+		 "Set this to take full dump on MPI hang.");
+
 /*
  * CT6 CTX allocation cache
  */
@@ -2518,6 +2523,7 @@  static struct isp_operations qla27xx_isp_ops = {
 	.read_nvram		= NULL,
 	.write_nvram		= NULL,
 	.fw_dump		= qla27xx_fwdump,
+	.mpi_fw_dump		= qla27xx_mpi_fwdump,
 	.beacon_on		= qla24xx_beacon_on,
 	.beacon_off		= qla24xx_beacon_off,
 	.beacon_blink		= qla83xx_beacon_blink,
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index 6aeb1c3fb7a8..deb490cb90f0 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -12,6 +12,33 @@ 
 #define IOBASE(vha)	IOBAR(ISPREG(vha))
 #define INVALID_ENTRY ((struct qla27xx_fwdt_entry *)0xffffffffffffffffUL)
 
+/* hardware_lock assumed held. */
+static void
+qla27xx_write_remote_reg(struct scsi_qla_host *vha,
+			 u32 addr, u32 data)
+{
+	char *reg = (char *)ISPREG(vha);
+
+	ql_dbg(ql_dbg_misc, vha, 0xd300,
+	       "%s: addr/data = %xh/%xh\n", __func__, addr, data);
+
+	WRT_REG_DWORD(reg + IOBASE(vha), 0x40);
+	WRT_REG_DWORD(reg + 0xc4, data);
+	WRT_REG_DWORD(reg + 0xc0, addr);
+}
+
+void
+qla27xx_reset_mpi(scsi_qla_host_t *vha)
+{
+	ql_dbg(ql_dbg_misc + ql_dbg_verbose, vha, 0xd301,
+	       "Entered %s.\n", __func__);
+
+	qla27xx_write_remote_reg(vha, 0x104050, 0x40004);
+	qla27xx_write_remote_reg(vha, 0x10405c, 0x4);
+
+	vha->hw->stat.num_mpi_reset++;
+}
+
 static inline void
 qla27xx_insert16(uint16_t value, void *buf, ulong *len)
 {
@@ -997,6 +1024,62 @@  qla27xx_fwdt_template_valid(void *p)
 	return true;
 }
 
+void
+qla27xx_mpi_fwdump(scsi_qla_host_t *vha, int hardware_locked)
+{
+	ulong flags = 0;
+	bool need_mpi_reset = 1;
+
+#ifndef __CHECKER__
+	if (!hardware_locked)
+		spin_lock_irqsave(&vha->hw->hardware_lock, flags);
+#endif
+	if (!vha->hw->mpi_fw_dump) {
+		ql_log(ql_log_warn, vha, 0x02f3, "-> mpi_fwdump no buffer\n");
+	} else if (vha->hw->mpi_fw_dumped) {
+		ql_log(ql_log_warn, vha, 0x02f4,
+		       "-> MPI firmware already dumped (%p) -- ignoring request\n",
+		       vha->hw->mpi_fw_dump);
+	} else {
+		struct fwdt *fwdt = &vha->hw->fwdt[1];
+		ulong len;
+		void *buf = vha->hw->mpi_fw_dump;
+
+		ql_log(ql_log_warn, vha, 0x02f5, "-> fwdt1 running...\n");
+		if (!fwdt->template) {
+			ql_log(ql_log_warn, vha, 0x02f6,
+			       "-> fwdt1 no template\n");
+			goto bailout;
+		}
+		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
+		if (len == 0) {
+			goto bailout;
+		} else if (len != fwdt->dump_size) {
+			ql_log(ql_log_warn, vha, 0x02f7,
+			       "-> fwdt1 fwdump residual=%+ld\n",
+			       fwdt->dump_size - len);
+		} else {
+			need_mpi_reset = 0;
+		}
+
+		vha->hw->mpi_fw_dump_len = len;
+		vha->hw->mpi_fw_dumped = 1;
+
+		ql_log(ql_log_warn, vha, 0x02f8,
+		       "-> MPI firmware dump saved to buffer (%lu/%p)\n",
+		       vha->host_no, vha->hw->mpi_fw_dump);
+		qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+	}
+
+bailout:
+	if (need_mpi_reset)
+		qla27xx_reset_mpi(vha);
+#ifndef __CHECKER__
+	if (!hardware_locked)
+		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
+#endif
+}
+
 void
 qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 {
@@ -1015,30 +1098,26 @@  qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 		    vha->hw->fw_dump);
 	} else {
 		struct fwdt *fwdt = vha->hw->fwdt;
-		uint j;
 		ulong len;
 		void *buf = vha->hw->fw_dump;
 		uint count = vha->hw->fw_dump_mpi ? 2 : 1;
 
-		for (j = 0; j < count; j++, fwdt++, buf += len) {
-			ql_log(ql_log_warn, vha, 0xd011,
-			    "-> fwdt%u running...\n", j);
-			if (!fwdt->template) {
-				ql_log(ql_log_warn, vha, 0xd012,
-				    "-> fwdt%u no template\n", j);
-				break;
-			}
-			len = qla27xx_execute_fwdt_template(vha,
-			    fwdt->template, buf);
-			if (len == 0) {
-				goto bailout;
-			} else if (len != fwdt->dump_size) {
-				ql_log(ql_log_warn, vha, 0xd013,
-				    "-> fwdt%u fwdump residual=%+ld\n",
-				    j, fwdt->dump_size - len);
-			}
+		ql_log(ql_log_warn, vha, 0xd011, "-> fwdt0 running...\n");
+		if (!fwdt->template) {
+			ql_log(ql_log_warn, vha, 0xd012,
+			       "-> fwdt0 no template\n");
+			goto bailout;
 		}
-		vha->hw->fw_dump_len = buf - (void *)vha->hw->fw_dump;
+		len = qla27xx_execute_fwdt_template(vha, fwdt->template, buf);
+		if (len == 0) {
+			goto bailout;
+		} else if (len != fwdt->dump_size) {
+			ql_log(ql_log_warn, vha, 0xd013,
+			       "-> fwdt0 fwdump residual=%+ld\n",
+				fwdt->dump_size - len);
+		}
+
+		vha->hw->fw_dump_len = len;
 		vha->hw->fw_dumped = 1;
 
 		ql_log(ql_log_warn, vha, 0xd015,
@@ -1048,7 +1127,6 @@  qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 	}
 
 bailout:
-	vha->hw->fw_dump_mpi = 0;
 #ifndef __CHECKER__
 	if (!hardware_locked)
 		spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);