new file mode 100644
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS PHY Device Tree Bindings
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@samsung.com>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - samsung,exynos7-ufs-phy
+
+ reg:
+ maxItems: 1
+ description: PHY base register address
+
+ reg-names:
+ items:
+ - const: phy-pma
+
+ clocks:
+ items:
+ - description: PLL reference clock
+ - description: symbol clock for input symbol ( rx0-ch0 symbol clock)
+ - description: symbol clock for input symbol ( rx1-ch1 symbol clock)
+ - description: symbol clock for output symbol ( tx0 symbol clock)
+
+ clock-names:
+ items:
+ - const: ref_clk
+ - const: rx1_symbol_clk
+ - const: rx0_symbol_clk
+ - const: tx0_symbol_clk
+
+ samsung,pmu-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle for PMU system controller interface, used to
+ control pmu registers bits for ufs m-phy
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - samsung,pmu-syscon
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos7-clk.h>
+
+ ufs_phy: ufs-phy@15571800 {
+ compatible = "samsung,exynos7-ufs-phy";
+ reg = <0x15571800 0x240>;
+ reg-names = "phy-pma";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
+ clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+ <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+ <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+ <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+ clock-names = "ref_clk", "rx1_symbol_clk",
+ "rx0_symbol_clk", "tx0_symbol_clk";
+
+ };
+...