From patchwork Wed Jun 24 12:03:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Deepak Ukey X-Patchwork-Id: 11623013 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D104D92A for ; Wed, 24 Jun 2020 11:53:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B015B20B1F for ; Wed, 24 Jun 2020 11:53:57 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="dV0sbemp" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2403798AbgFXLx5 (ORCPT ); Wed, 24 Jun 2020 07:53:57 -0400 Received: from esa2.microchip.iphmx.com ([68.232.149.84]:19656 "EHLO esa2.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2403787AbgFXLx4 (ORCPT ); Wed, 24 Jun 2020 07:53:56 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1592999635; x=1624535635; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=ze458a/2knwCCWDXVr9U0oK2QQecwf0tgSMR+1S97Ck=; b=dV0sbempa3b4+WsxZHQhe/3gLJPXA1j7eIE5nKfIm5QrBSjZNw42I/cE 3LCdZ5WygcNOGFPUwTCMm22t/NdJ+fG/RH0/UGfzaea8Ay+GNdZSAC/nj XCBdki44+DiVsxex+SilKIwzxlnBtpjB5AFLxWRy0qaFbzN4uzSJoBX6h xCFzGcg5BmMZNSGq4B5ALhr6tdUG+eA54Oqvpnglzx55JcpeChldgLcK4 4TFvLHGdbgqSsLPr8cJKfuVKcgEV5r/UCEPdtI05xget3jHk1tUrl4i0Z 5WzcGPnFoaIGjt6ROvsuvSWQlzDP8bb4UHNQfBMKowWIAB/phJV222qvk w==; IronPort-SDR: oKtVQ4icemPY90Tq7/x6oswPQjWhU0n4Il7lHVmcICfNHQ7CZqISOY0j21hsvr8HVieC7QaC3R srEylA8TBeJaBJNdvGvC4IivjZsnfroOjnP4elNpwe1qPHVhbcHDNVNUePj1KgMw1+Y5I30y7A I1/ZaXYxKQscazljBuIs5uxTQrs4MxsEnMvwopv9QdIfRsX950AN5oYWaGS9fPrXUqImNsiZmE IuxG1ETqvaR9/Vl4m7PzFy6gPaxS0w9mpZfUTBn1zI0ylzHVYUUAyjSu1XEuL/SCZeGWWGnQ6c BVA= X-IronPort-AV: E=Sophos;i="5.75,275,1589266800"; d="scan'208";a="79582636" Received: from unknown (HELO smtp.microsemi.com) ([208.19.100.23]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 24 Jun 2020 04:53:55 -0700 Received: from AVMBX1.microsemi.net (10.100.34.31) by AVMBX3.microsemi.net (10.100.34.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1979.3; Wed, 24 Jun 2020 04:53:54 -0700 Received: from localhost (10.41.130.51) by avmbx1.microsemi.net (10.100.34.31) with Microsoft SMTP Server id 15.1.1979.3 via Frontend Transport; Wed, 24 Jun 2020 04:53:53 -0700 From: Deepak Ukey To: CC: , , , , , , , , , , , Subject: [PATCH V2 2/3] pm80xx : Staggered spin up support. Date: Wed, 24 Jun 2020 17:33:21 +0530 Message-ID: <20200624120322.6265-3-deepak.ukey@microchip.com> X-Mailer: git-send-email 2.19.0-rc1 In-Reply-To: <20200624120322.6265-1-deepak.ukey@microchip.com> References: <20200624120322.6265-1-deepak.ukey@microchip.com> MIME-Version: 1.0 Sender: linux-scsi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org From: Viswas G As a part of drive discovery, driver will initaite the drive spin up. If all drives do spin up together, it will result in large power consumption. To reduce the power consumption, driver provide an option to make a small group of drives (say 3 or 4 drives together) to do the spin up. The delay between two spin up group and no of drives to spin up (group) can be programmed by the customer in seeprom and driver will use it to control the spinup. Signed-off-by: Viswas G Signed-off-by: Radha Ramachandran Signed-off-by: Deepak Ukey Reported-by: kernel test robot Reported-by: kernel test robot --- drivers/scsi/pm8001/pm8001_defs.h | 3 + drivers/scsi/pm8001/pm8001_hwi.c | 14 ++++- drivers/scsi/pm8001/pm8001_init.c | 53 +++++++++++++++- drivers/scsi/pm8001/pm8001_sas.c | 36 ++++++++++- drivers/scsi/pm8001/pm8001_sas.h | 13 ++++ drivers/scsi/pm8001/pm80xx_hwi.c | 125 +++++++++++++++++++++++++++++++++----- 6 files changed, 221 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h index 1c7f15fd69ce..fd700ce5e80c 100644 --- a/drivers/scsi/pm8001/pm8001_defs.h +++ b/drivers/scsi/pm8001/pm8001_defs.h @@ -101,6 +101,9 @@ enum port_type { #define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM) #define CONFIG_SCSI_PM8001_MAX_DMA_SG 528 #define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG +#define SPINUP_DELAY_OFFSET 0x890 /* 0x890 - delay */ +#define SPINUP_GROUP_OFFSET 0x892 /* 0x892 - group */ +#define PM80XX_MAX_SPINUP_DELAY 10000 /* 10000 ms */ enum memory_region_num { AAP1 = 0x0, /* application acceleration processor */ IOP, /* IO processor */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index fb9848e1d481..6378c8e8d6b2 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3237,7 +3237,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) (struct local_phy_ctl_resp *)(piomb + 4); u32 status = le32_to_cpu(pPayload->status); u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS; - u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS; + u32 phy_op = (le32_to_cpu(pPayload->phyop_phyid) & OP_BITS) >> 8; tag = le32_to_cpu(pPayload->tag); if (status != 0) { PM8001_MSG_DBG(pm8001_ha, @@ -3248,6 +3248,13 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("%x phy execute %x phy op success!\n", phy_id, phy_op)); pm8001_ha->phy[phy_id].reset_success = true; + if (phy_op == PHY_NOTIFY_ENABLE_SPINUP && + !pm8001_ha->reset_in_progress){ + /* Notify the sas layer to discover + * the the whole sas domain + */ + pm8001_bytes_dmaed(pm8001_ha, phy_id); + } } if (pm8001_ha->phy[phy_id].enable_completion) { complete(pm8001_ha->phy[phy_id].enable_completion); @@ -3643,7 +3650,10 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n")); break; } - complete(pm8001_dev->dcompletion); + if (pm8001_dev->dcompletion) { + complete(pm8001_dev->dcompletion); + pm8001_dev->dcompletion = NULL; + } ccb->task = NULL; ccb->ccb_tag = 0xFFFFFFFF; pm8001_tag_free(pm8001_ha, htag); diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 38a65e1da823..46a2f86f3d9b 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -55,6 +55,12 @@ MODULE_PARM_DESC(link_rate, "Enable link rate.\n" " 4: Link rate 6.0G\n" " 8: Link rate 12.0G\n"); +bool staggered_spinup; +module_param(staggered_spinup, bool, 0644); +MODULE_PARM_DESC(staggered_spinup, "enable the staggered spinup feature.\n" + " 0/N: false\n" + " 1/Y: true\n"); + static struct scsi_transport_template *pm8001_stt; /** @@ -164,7 +170,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) if (!pm8001_ha) return; - + del_timer(&pm8001_ha->spinup_timer); for (i = 0; i < USI_MAX_MEMCNT; i++) { if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) { dma_free_coherent(&pm8001_ha->pdev->dev, @@ -488,6 +494,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, pm8001_ha->shost = shost; pm8001_ha->id = pm8001_id++; pm8001_ha->logging_level = logging_level; + pm8001_ha->staggered_spinup = staggered_spinup; pm8001_ha->non_fatal_count = 0; if (link_rate >= 1 && link_rate <= 15) pm8001_ha->link_rate = (link_rate << 8); @@ -621,7 +628,8 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, * Currently we just set the fixed SAS address to our HBA,for manufacture, * it should read from the EEPROM */ -static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) +static void pm8001_init_sas_add_and_spinup_config + (struct pm8001_hba_info *pm8001_ha) { u8 i, j; u8 sas_add[8]; @@ -707,6 +715,45 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr, SAS_ADDR_SIZE); #endif + + /* For spinning up drives in group */ + pm8001_ha->phy_head = -1; + pm8001_ha->phy_tail = -1; + + for (i = 0; i < PM8001_MAX_PHYS; i++) + pm8001_ha->phy_up[i] = 0xff; + + timer_setup(&pm8001_ha->spinup_timer, + (void *)pm8001_spinup_timedout, 0); + + if (pm8001_ha->staggered_spinup == true) { + /* spinup interval in unit of 100 ms */ + pm8001_ha->spinup_interval = + payload.func_specific[SPINUP_DELAY_OFFSET] * 100; + pm8001_ha->spinup_group = + payload.func_specific[SPINUP_GROUP_OFFSET]; + } else { + pm8001_ha->spinup_interval = 0; + pm8001_ha->spinup_group = pm8001_ha->chip->n_phy; + } + + if (pm8001_ha->spinup_interval > PM80XX_MAX_SPINUP_DELAY) { + PM8001_DISC_DBG(pm8001_ha, pm8001_printk( + "Spinup delay from Seeprom is %d ms, reset to %d ms\n", + pm8001_ha->spinup_interval * 100, PM80XX_MAX_SPINUP_DELAY)); + pm8001_ha->spinup_interval = PM80XX_MAX_SPINUP_DELAY; + } + + if (pm8001_ha->spinup_group > pm8001_ha->chip->n_phy) { + PM8001_DISC_DBG(pm8001_ha, pm8001_printk( + "Spinup group from Seeprom is %d, reset to %d\n", + pm8001_ha->spinup_group, pm8001_ha->chip->n_phy)); + pm8001_ha->spinup_group = pm8001_ha->chip->n_phy; + } + + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Spinup interval : %d Spinup group %d\n", + pm8001_ha->spinup_interval, pm8001_ha->spinup_group)); } /* @@ -1105,7 +1152,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev, pm80xx_set_thermal_config(pm8001_ha); } - pm8001_init_sas_add(pm8001_ha); + pm8001_init_sas_add_and_spinup_config(pm8001_ha); /* phy setting support for motherboard controller */ if (pm8001_configure_phy_settings(pm8001_ha)) goto err_out_shost; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index b7cbc312843e..cf1c5e68953b 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -265,14 +265,39 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, void pm8001_scan_start(struct Scsi_Host *shost) { int i; + unsigned long lock_flags; struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + DECLARE_COMPLETION(comp); pm8001_ha = sha->lldd_ha; /* SAS_RE_INITIALIZATION not available in SPCv/ve */ if (pm8001_ha->chip_id == chip_8001) PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); - for (i = 0; i < pm8001_ha->chip->n_phy; ++i) - PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); + + if (pm8001_ha->pdev->device == 0x8001 || + pm8001_ha->pdev->device == 0x8081 || + (pm8001_ha->spinup_interval != 0)) { + for (i = 0; i < pm8001_ha->chip->n_phy; ++i) + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); + } else { + for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { + spin_lock_irqsave(&pm8001_ha->lock, lock_flags); + pm8001_ha->phy_started = i; + pm8001_ha->scan_completion = ∁ + pm8001_ha->phystart_timedout = 1; + spin_unlock_irqrestore(&pm8001_ha->lock, lock_flags); + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); + wait_for_completion_timeout(&comp, + msecs_to_jiffies(500)); + if (pm8001_ha->phystart_timedout) + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Timeout happened for phyid = %d\n", i)); + } + spin_lock_irqsave(&pm8001_ha->lock, lock_flags); + pm8001_ha->phy_started = -1; + pm8001_ha->scan_completion = NULL; + spin_unlock_irqrestore(&pm8001_ha->lock, lock_flags); + } } int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) @@ -662,6 +687,13 @@ static int pm8001_dev_found_notify(struct domain_device *dev) flag = 1; /* directly sata */ } } /*register this device to HBA*/ + + if (pm8001_ha->phy_started == pm8001_device->attached_phy) { + if (pm8001_ha->scan_completion != NULL) { + pm8001_ha->phystart_timedout = 0; + complete(pm8001_ha->scan_completion); + } + } PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n")); PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); spin_unlock_irqrestore(&pm8001_ha->lock, flags); diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 488af79dec47..d2d73cba7f41 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -261,6 +261,7 @@ struct pm8001_port { u8 port_attached; u16 wide_port_phymap; u8 port_state; + u8 port_id; struct list_head list; }; @@ -566,6 +567,17 @@ struct pm8001_hba_info { u32 reset_in_progress; u32 non_fatal_count; u32 non_fatal_read_length; + bool staggered_spinup; + struct completion *scan_completion; + u32 phy_started; + u16 phystart_timedout; + int spinup_group; + int spinup_interval; + int phy_up[PM8001_MAX_PHYS]; + struct timer_list spinup_timer; + int phy_head; + int phy_tail; + spinlock_t phy_q_lock; }; struct pm8001_work { @@ -684,6 +696,7 @@ void pm8001_open_reject_retry( int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo, u32 mem_size, u32 align); +void pm8001_spinup_timedout(struct timer_list *t); void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha); int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha, diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index a909d00c6897..748c7a06262f 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -46,6 +46,72 @@ #define SMP_DIRECT 1 #define SMP_INDIRECT 2 +static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, + u32 phyId, u32 phy_op); + +void pm8001_queue_phyup(struct pm8001_hba_info *pm8001_ha, int phy_id) +{ + int i; + + if (pm8001_ha->phy_head == -1) { + pm8001_ha->phy_head = pm8001_ha->phy_tail = 0; + } else { + /* If the phy id is already queued , discard the phy up */ + for (i = 0; i < pm8001_ha->chip->n_phy; i++) + if (pm8001_ha->phy_up[i] == phy_id) + return; + pm8001_ha->phy_tail = + (pm8001_ha->phy_tail + 1) % PM8001_MAX_PHYS; + } + pm8001_ha->phy_up[pm8001_ha->phy_tail] = phy_id; +} + +void pm8001_spinup_timedout(struct timer_list *t) +{ + struct pm8001_hba_info *pm8001_ha = + from_timer(pm8001_ha, t, spinup_timer); + struct pm8001_phy *phy; + unsigned long flags; + int i = 0, phy_id = 0xff; + + spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags); + + do { + if (i++ >= pm8001_ha->spinup_group && pm8001_ha->spinup_group) + break; + + if (pm8001_ha->phy_head == -1 || pm8001_ha->reset_in_progress) + break; /* No phys to spinup */ + + phy_id = pm8001_ha->phy_up[pm8001_ha->phy_head]; + /* Processed phy id, make it invalid 0xff for + * checking repeated phy ups + */ + pm8001_ha->phy_up[pm8001_ha->phy_head] = 0xff; + if (pm8001_ha->phy_head == pm8001_ha->phy_tail) { + pm8001_ha->phy_head = pm8001_ha->phy_tail = -1; + } else { + pm8001_ha->phy_head = + (pm8001_ha->phy_head+1) % PM8001_MAX_PHYS; + } + + if (phy_id == 0xff) + break; + phy = &pm8001_ha->phy[phy_id]; + if (phy->phy_type & PORT_TYPE_SAS) { + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_NOTIFY_ENABLE_SPINUP); + } else { + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_LINK_RESET); + } + } while (1); + + if (pm8001_ha->phy_head != -1 && pm8001_ha->spinup_group) + mod_timer(&pm8001_ha->spinup_timer, + jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval)); + spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags); +} int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value) { @@ -3302,11 +3368,12 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) port->port_state = portstate; port->wide_port_phymap |= (1U << phy_id); phy->phy_state = PHY_STATE_LINK_UP_SPCV; + phy->port = port; PM8001_MSG_DBG(pm8001_ha, pm8001_printk( "portid:%d; phyid:%d; linkrate:%d; " "portstate:%x; devicetype:%x\n", port_id, phy_id, link_rate, portstate, deviceType)); - + port->port_id = port_id; switch (deviceType) { case SAS_PHY_UNUSED: PM8001_MSG_DBG(pm8001_ha, @@ -3314,8 +3381,12 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) break; case SAS_END_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); - pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id, - PHY_NOTIFY_ENABLE_SPINUP); + spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags); + pm8001_queue_phyup(pm8001_ha, phy_id); + spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags); + if (!timer_pending(&pm8001_ha->spinup_timer)) + mod_timer(&pm8001_ha->spinup_timer, + jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval)); port->port_attached = 1; pm8001_get_lrate_mode(phy, link_rate); break; @@ -3351,9 +3422,10 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4; pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); - if (pm8001_ha->flags == PM8001F_RUN_TIME) - msleep(200);/*delay a moment to wait disk to spinup*/ - pm8001_bytes_dmaed(pm8001_ha, phy_id); + if (!pm8001_ha->reset_in_progress) { + if (deviceType != SAS_END_DEVICE) + pm8001_bytes_dmaed(pm8001_ha, phy_id); + } } /** @@ -3388,11 +3460,17 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) port->port_state = portstate; phy->phy_state = PHY_STATE_LINK_UP_SPCV; port->port_attached = 1; + phy->port = port; + port->port_id = port_id; pm8001_get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; phy->phy_attached = 1; phy->sas_phy.oob_mode = SATA_OOB_MODE; - sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); + if (!pm8001_ha->reset_in_progress) { + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); + } else + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "HW_EVENT_PHY_UP: not notified to host\n")); spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4), sizeof(struct dev_to_host_fis)); @@ -3401,7 +3479,8 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) phy->identify.device_type = SAS_SATA_DEV; pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); - pm8001_bytes_dmaed(pm8001_ha, phy_id); + if (!pm8001_ha->reset_in_progress) + pm8001_bytes_dmaed(pm8001_ha, phy_id); } /** @@ -3497,12 +3576,14 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) status, phy_id)); if (status == 0) { phy->phy_state = PHY_LINK_DOWN; - if (pm8001_ha->flags == PM8001F_RUN_TIME && - phy->enable_completion != NULL) { - complete(phy->enable_completion); - phy->enable_completion = NULL; - } } + + if (pm8001_ha->flags == PM8001F_RUN_TIME && + phy->enable_completion != NULL) { + complete(phy->enable_completion); + phy->enable_completion = NULL; + } + return 0; } @@ -3580,7 +3661,14 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) case HW_EVENT_SATA_SPINUP_HOLD: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n")); - sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); + spin_lock_irqsave(&pm8001_ha->phy_q_lock, flags); + pm8001_queue_phyup(pm8001_ha, phy_id); + spin_unlock_irqrestore(&pm8001_ha->phy_q_lock, flags); + + /* Start the timer if not started */ + if (!timer_pending(&pm8001_ha->spinup_timer)) + mod_timer(&pm8001_ha->spinup_timer, + jiffies + msecs_to_jiffies(pm8001_ha->spinup_interval)); break; case HW_EVENT_PHY_DOWN: PM8001_MSG_DBG(pm8001_ha, @@ -4888,7 +4976,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) PM8001_INIT_DBG(pm8001_ha, pm8001_printk("PHY START REQ for phy_id %d\n", phy_id)); - payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | + payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_ENABLE | LINKMODE_AUTO | pm8001_ha->link_rate | phy_id); /* SSC Disable and SAS Analog ST configuration */ /** @@ -4950,6 +5038,8 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, u16 ITNT = 2000; struct domain_device *dev = pm8001_dev->sas_device; struct domain_device *parent_dev = dev->parent; + struct pm8001_phy *phy; + struct pm8001_port *port; circularQ = &pm8001_ha->inbnd_q_tbl[0]; memset(&payload, 0, sizeof(payload)); @@ -4981,8 +5071,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ? pm8001_dev->sas_device->linkrate : dev->port->linkrate; + phy = &pm8001_ha->phy[phy_id]; + port = phy->port; + payload.phyid_portid = - cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) | + cpu_to_le32(((port->port_id) & 0xFF) | ((phy_id & 0xFF) << 8)); payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |