@@ -670,6 +670,7 @@ static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
/**
* ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
* @ipr_cmd: ipr command struct
+ * @fast_done: fast done function call-back
*
* Return value:
* none
@@ -687,7 +688,7 @@ static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd,
/**
* __ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
- * @ioa_cfg: ioa config struct
+ * @hrrq: hrr queue
*
* Return value:
* pointer to ipr command struct
@@ -1287,7 +1288,7 @@ static int ipr_is_same_device(struct ipr_resource_entry *res,
/**
* __ipr_format_res_path - Format the resource path for printing.
* @res_path: resource path
- * @buf: buffer
+ * @buffer: buffer
* @len: length of buffer provided
*
* Return value:
@@ -1310,7 +1311,7 @@ static char *__ipr_format_res_path(u8 *res_path, char *buffer, int len)
* ipr_format_res_path - Format the resource path for printing.
* @ioa_cfg: ioa config struct
* @res_path: resource path
- * @buf: buffer
+ * @buffer: buffer
* @len: length of buffer provided
*
* Return value:
@@ -1391,7 +1392,6 @@ static void ipr_update_res_entry(struct ipr_resource_entry *res,
* ipr_clear_res_target - Clear the bit in the bit map representing the target
* for the resource.
* @res: resource entry struct
- * @cfgtew: config table entry wrapper struct
*
* Return value:
* none
@@ -2667,7 +2667,7 @@ static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
/**
* ipr_timeout - An internally generated op has timed out.
- * @ipr_cmd: ipr command struct
+ * @t: Timer context used to fetch ipr command struct
*
* This function blocks host requests and initiates an
* adapter reset.
@@ -2700,7 +2700,7 @@ static void ipr_timeout(struct timer_list *t)
/**
* ipr_oper_timeout - Adapter timed out transitioning to operational
- * @ipr_cmd: ipr command struct
+ * @t: Timer context used to fetch ipr command struct
*
* This function blocks host requests and initiates an
* adapter reset.
@@ -3484,6 +3484,7 @@ static struct bin_attribute ipr_trace_attr = {
/**
* ipr_show_fw_version - Show the firmware version
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -3518,6 +3519,7 @@ static struct device_attribute ipr_fw_version_attr = {
/**
* ipr_show_log_level - Show the adapter's error logging level
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -3540,7 +3542,9 @@ static ssize_t ipr_show_log_level(struct device *dev,
/**
* ipr_store_log_level - Change the adapter's error logging level
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
+ * @count: buffer size
*
* Return value:
* number of bytes printed to buffer
@@ -3571,6 +3575,7 @@ static struct device_attribute ipr_log_level_attr = {
/**
* ipr_store_diagnostics - IOA Diagnostics interface
* @dev: device struct
+ * @attr: device attribute (unused)
* @buf: buffer
* @count: buffer size
*
@@ -3631,7 +3636,8 @@ static struct device_attribute ipr_diagnostics_attr = {
/**
* ipr_show_adapter_state - Show the adapter's state
- * @class_dev: device struct
+ * @dev: device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -3657,6 +3663,7 @@ static ssize_t ipr_show_adapter_state(struct device *dev,
/**
* ipr_store_adapter_state - Change adapter state
* @dev: device struct
+ * @attr: device attribute (unused)
* @buf: buffer
* @count: buffer size
*
@@ -3708,6 +3715,7 @@ static struct device_attribute ipr_ioa_state_attr = {
/**
* ipr_store_reset_adapter - Reset the adapter
* @dev: device struct
+ * @attr: device attribute (unused)
* @buf: buffer
* @count: buffer size
*
@@ -3749,6 +3757,7 @@ static int ipr_iopoll(struct irq_poll *iop, int budget);
/**
* ipr_show_iopoll_weight - Show ipr polling mode
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -3772,7 +3781,9 @@ static ssize_t ipr_show_iopoll_weight(struct device *dev,
/**
* ipr_store_iopoll_weight - Change the adapter's polling mode
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
+ * @count: buffer size
*
* Return value:
* number of bytes printed to buffer
@@ -3871,7 +3882,7 @@ static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
/**
* ipr_free_ucode_buffer - Frees a microcode download buffer
- * @p_dnld: scatter/gather list pointer
+ * @sglist: scatter/gather list pointer
*
* Free a DMA'able ucode download buffer previously allocated with
* ipr_alloc_ucode_buffer
@@ -4059,7 +4070,8 @@ static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg,
/**
* ipr_store_update_fw - Update the firmware on the adapter
- * @class_dev: device struct
+ * @dev: device struct
+ * @attr: device attribute (unused)
* @buf: buffer
* @count: buffer size
*
@@ -4139,6 +4151,7 @@ static struct device_attribute ipr_update_fw_attr = {
/**
* ipr_show_fw_type - Show the adapter's firmware type.
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -4480,7 +4493,6 @@ static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; };
* ipr_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
- * @reason: calling context
*
* Return value:
* actual depth set
@@ -4650,6 +4662,7 @@ static struct device_attribute ipr_resource_type_attr = {
/**
* ipr_show_raw_mode - Show the adapter's raw mode
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
*
* Return value:
@@ -4677,7 +4690,9 @@ static ssize_t ipr_show_raw_mode(struct device *dev,
/**
* ipr_store_raw_mode - Change the adapter's raw mode
* @dev: class device struct
+ * @attr: device attribute (unused)
* @buf: buffer
+ * @count: buffer size
*
* Return value:
* number of bytes printed to buffer
@@ -5060,7 +5075,7 @@ static int ipr_match_lun(struct ipr_cmnd *ipr_cmd, void *device)
/**
* ipr_cmnd_is_free - Check if a command is free or not
- * @ipr_cmd ipr command struct
+ * @ipr_cmd: ipr command struct
*
* Returns:
* true / false
@@ -5096,7 +5111,7 @@ static int ipr_match_res(struct ipr_cmnd *ipr_cmd, void *resource)
/**
* ipr_wait_for_ops - Wait for matching commands to complete
- * @ipr_cmd: ipr command struct
+ * @ioa_cfg: ioa config struct
* @device: device to match (sdev)
* @match: match function to use
*
@@ -5261,6 +5276,7 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
* ipr_sata_reset - Reset the SATA port
* @link: SATA link to reset
* @classes: class of the attached device
+ * @deadline: unused
*
* This function issues a SATA phy reset to the affected ATA link.
*
@@ -5440,7 +5456,7 @@ static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
/**
* ipr_abort_timeout - An abort task has timed out
- * @ipr_cmd: ipr command struct
+ * @t: Timer context used to fetch ipr command struct
*
* This function handles when an abort task times out. If this
* happens we issue a bus reset since we have resources tied
@@ -5569,7 +5585,8 @@ static int ipr_cancel_op(struct scsi_cmnd *scsi_cmd)
/**
* ipr_eh_abort - Abort a single op
- * @scsi_cmd: scsi command struct
+ * @shost: scsi host struct
+ * @elapsed_time: elapsed time
*
* Return value:
* 0 if scan in progress / 1 if scan is complete
@@ -5696,6 +5713,7 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
* ipr_isr_eh - Interrupt service routine error handler
* @ioa_cfg: ioa config struct
* @msg: message to log
+ * @number: various meanings depending on the caller/message
*
* Return value:
* none
@@ -6268,8 +6286,7 @@ static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
/**
* ipr_gen_sense - Generate SCSI sense data from an IOASA
- * @ioasa: IOASA
- * @sense_buf: sense data buffer
+ * @ipr_cmd: ipr command struct
*
* Return value:
* none
@@ -6702,7 +6719,7 @@ static int ipr_ioctl(struct scsi_device *sdev, unsigned int cmd,
/**
* ipr_info - Get information about the card/driver
- * @scsi_host: scsi host struct
+ * @host: scsi host struct
*
* Return value:
* pointer to buffer with description string
@@ -7592,7 +7609,7 @@ static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
/**
* ipr_build_mode_sense - Builds a mode sense command
* @ipr_cmd: ipr command struct
- * @res: resource entry struct
+ * @res_handle: resource entry struct
* @parm: Byte 2 of mode sense command
* @dma_addr: DMA address of mode sense buffer
* @xfer_len: Size of DMA buffer
@@ -7939,6 +7956,7 @@ static void ipr_build_ioa_service_action(struct ipr_cmnd *ipr_cmd,
/**
* ipr_ioafp_set_caching_parameters - Issue Set Cache parameters service
* action
+ * @ipr_cmd: ipr command struct
*
* Return value:
* none
@@ -7975,6 +7993,10 @@ static int ipr_ioafp_set_caching_parameters(struct ipr_cmnd *ipr_cmd)
/**
* ipr_ioafp_inquiry - Send an Inquiry to the adapter.
* @ipr_cmd: ipr command struct
+ * @flags: flags to send
+ * @page: page to inquire
+ * @dma_addr: DMA address
+ * @xfer_len: transfer data length
*
* This utility function sends an inquiry to the adapter.
*
@@ -8265,7 +8287,7 @@ static int ipr_ioafp_identify_hrrq(struct ipr_cmnd *ipr_cmd)
/**
* ipr_reset_timer_done - Adapter reset timer function
- * @ipr_cmd: ipr command struct
+ * @t: Timer context used to fetch ipr command struct
*
* Description: This function is used in adapter reset processing
* for timing events. If the reset_cmd pointer in the IOA
@@ -9483,7 +9505,6 @@ static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
* Description: This is the second phase of adapter initialization
* This function takes care of initilizing the adapter to the point
* where it can accept new commands.
-
* Return value:
* 0 on success / -EIO on failure
**/
@@ -9597,7 +9618,7 @@ static void ipr_free_irqs(struct ipr_ioa_cfg *ioa_cfg)
/**
* ipr_free_all_resources - Free all allocated resources for an adapter.
- * @ipr_cmd: ipr command struct
+ * @ioa_cfg: ioa config struct
*
* This function frees all allocated resources for the
* specified adapter.
@@ -10059,7 +10080,8 @@ static int ipr_request_other_msi_irqs(struct ipr_ioa_cfg *ioa_cfg,
/**
* ipr_test_intr - Handle the interrupt generated in ipr_test_msi().
- * @pdev: PCI device struct
+ * @devp: PCI device struct
+ * @irq: IRQ number
*
* Description: Simply set the msi_received flag to 1 indicating that
* Message Signaled Interrupts are supported.
@@ -10085,6 +10107,7 @@ static irqreturn_t ipr_test_intr(int irq, void *devp)
/**
* ipr_test_msi - Test for Message Signaled Interrupt (MSI) support.
+ * @ioa_cfg: ioa config struct
* @pdev: PCI device struct
*
* Description: This routine sets up and initiates a test interrupt to determine
@@ -10530,6 +10553,8 @@ static void ipr_remove(struct pci_dev *pdev)
/**
* ipr_probe - Adapter hot plug add entry point
+ * @pdev: pci device struct
+ * @dev_id: pci device ID
*
* Return value:
* 0 on success / non-zero on failure
@@ -10786,6 +10811,7 @@ static struct pci_driver ipr_driver = {
/**
* ipr_halt_done - Shutdown prepare completion
+ * @ipr_cmd: ipr command struct
*
* Return value:
* none
@@ -10797,6 +10823,9 @@ static void ipr_halt_done(struct ipr_cmnd *ipr_cmd)
/**
* ipr_halt - Issue shutdown prepare to all adapters
+ * @nb: Notifier block
+ * @event: Notifier event
+ * @buf: Notifier data (unused)
*
* Return value:
* NOTIFY_OK on success / NOTIFY_DONE on failure
Mainly misspellings and/or missing function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path' drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path' drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target' drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout' drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout' drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout' drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout' drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version' drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state' drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw' drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type' drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth' drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free' drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset' drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout' drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished' drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh' drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info' drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info' drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done' drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done' drivers/scsi/ipr.c:9486: warning: bad line: drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources' drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr' drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe' drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt' Cc: Brian King <brking@us.ibm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/scsi/ipr.c | 73 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 51 insertions(+), 22 deletions(-)