@@ -124,7 +124,7 @@ static int trace_level;
/**
* mega_setup_mailbox()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Allocates a 8 byte aligned memory for the handshake mailbox.
*/
@@ -178,9 +178,9 @@ mega_setup_mailbox(adapter_t *adapter)
}
-/*
+/**
* mega_query_adapter()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Issue the adapter inquiry commands to the controller and find out
* information and parameter about the devices attached
@@ -347,7 +347,7 @@ mega_query_adapter(adapter_t *adapter)
/**
* mega_runpendq()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Runs through the list of pending requests.
*/
@@ -358,10 +358,10 @@ mega_runpendq(adapter_t *adapter)
__mega_runpendq(adapter);
}
-/*
+/**
* megaraid_queue()
- * @scmd - Issue this scsi command
- * @done - the callback hook into the scsi mid-layer
+ * @scmd: Issue this scsi command
+ * @done: the callback hook into the scsi mid-layer
*
* The command queuing entry point for the mid-layer.
*/
@@ -413,8 +413,8 @@ static DEF_SCSI_QCMD(megaraid_queue)
/**
* mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
+ * @adapter: pointer to our soft state
+ * @cmd: scsi command from the mid-layer
*
* Allocate a SCB structure. This is the central structure for controller
* commands.
@@ -444,9 +444,9 @@ mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
/**
* mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
+ * @adapter: pointer to our soft state
+ * @cmd: scsi mid layer command
+ * @channel: channel on the controller
*
* Calculate the logical drive number based on the information in scsi command
* and the channel number.
@@ -503,9 +503,9 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel)
/**
* mega_build_cmd()
- * @adapter - pointer to our soft state
- * @cmd - Prepare using this scsi command
- * @busy - busy flag if no resources
+ * @adapter: pointer to our soft state
+ * @cmd: Prepare using this scsi command
+ * @busy: busy flag if no resources
*
* Prepares a command and scatter gather list for the controller. This routine
* also finds out if the commands is intended for a logical drive or a
@@ -937,11 +937,11 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
/**
* mega_prepare_passthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
+ * @adapter: pointer to our soft state
+ * @scb: our scsi control block
+ * @cmd: scsi command from the mid-layer
+ * @channel: actual channel on the controller
+ * @target: actual id on the controller.
*
* prepare a command for the scsi physical devices.
*/
@@ -1000,11 +1000,11 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
/**
* mega_prepare_extpassthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
+ * @adapter: pointer to our soft state
+ * @scb: our scsi control block
+ * @cmd: scsi command from the mid-layer
+ * @channel: actual channel on the controller
+ * @target: actual id on the controller.
*
* prepare a command for the scsi physical devices. This rountine prepares
* commands for devices which can take extended CDBs (>10 bytes)
@@ -1085,8 +1085,8 @@ __mega_runpendq(adapter_t *adapter)
/**
* issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
+ * @adapter: pointer to our soft state
+ * @scb: scsi control block
*
* Post a command to the card if the mailbox is available, otherwise return
* busy. We also take the scb from the pending list if the mailbox is
@@ -1166,8 +1166,8 @@ mega_busywait_mbox (adapter_t *adapter)
/**
* issue_scb_block()
- * @adapter - pointer to our soft state
- * @raw_mbox - the mailbox
+ * @adapter: pointer to our soft state
+ * @raw_mbox: the mailbox
*
* Issue a scb in synchronous and non-interrupt mode
*/
@@ -1247,8 +1247,8 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
/**
* megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
+ * @irq: irq
+ * @devp: pointer to our soft state
*
* Interrupt service routine for io-mapped controllers.
* Find out if our device is interrupting. If yes, acknowledge the interrupt
@@ -1323,8 +1323,8 @@ megaraid_isr_iomapped(int irq, void *devp)
/**
* megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
+ * @irq: irq
+ * @devp: pointer to our soft state
*
* Interrupt service routine for memory-mapped controllers.
* Find out if our device is interrupting. If yes, acknowledge the interrupt
@@ -1401,10 +1401,10 @@ megaraid_isr_memmapped(int irq, void *devp)
}
/**
* mega_cmd_done()
- * @adapter - pointer to our soft state
- * @completed - array of ids of completed commands
- * @nstatus - number of completed commands
- * @status - status of the last command completed
+ * @adapter: pointer to our soft state
+ * @completed: array of ids of completed commands
+ * @nstatus: number of completed commands
+ * @status: status of the last command completed
*
* Complete the commands and call the scsi mid-layer callback hooks.
*/
@@ -1921,9 +1921,9 @@ megaraid_reset(struct scsi_cmnd *cmd)
/**
* megaraid_abort_and_reset()
- * @adapter - megaraid soft state
- * @cmd - scsi command to be aborted or reset
- * @aor - abort or reset flag
+ * @adapter: megaraid soft state
+ * @cmd: scsi command to be aborted or reset
+ * @aor: abort or reset flag
*
* Try to locate the scsi command in the pending queue. If found and is not
* issued to the controller, abort/reset it. Otherwise return failure
@@ -2021,8 +2021,8 @@ free_local_pdev(struct pci_dev *pdev)
/**
* mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
+ * @dma_handle: handle returned for dma address
+ * @pdev: handle to pci device
*
* allocates memory for inquiry structure
*/
@@ -2045,8 +2045,8 @@ mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
/**
* proc_show_config()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display configuration information about the controller.
*/
@@ -2109,8 +2109,8 @@ proc_show_config(struct seq_file *m, void *v)
/**
* proc_show_stat()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display statistical information about the I/O activity.
*/
@@ -2143,8 +2143,8 @@ proc_show_stat(struct seq_file *m, void *v)
/**
* proc_show_mbox()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display mailbox information for the last command issued. This information
* is good for debugging.
@@ -2171,8 +2171,8 @@ proc_show_mbox(struct seq_file *m, void *v)
/**
* proc_show_rebuild_rate()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display current rebuild rate
*/
@@ -2214,8 +2214,8 @@ proc_show_rebuild_rate(struct seq_file *m, void *v)
/**
* proc_show_battery()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the battery module on the controller.
*/
@@ -2317,9 +2317,9 @@ mega_print_inquiry(struct seq_file *m, char *scsi_inq)
/**
* proc_show_pdrv()
- * @m - Synthetic file construction data
- * @page - buffer to write the data in
- * @adapter - pointer to our soft state
+ * @m: Synthetic file construction data
+ * @adapter: pointer to our soft state
+ * @channel: channel on the controller
*
* Display information about the physical drives.
*/
@@ -2433,8 +2433,8 @@ proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
/**
* proc_show_pdrv_ch0()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 0.
*/
@@ -2447,8 +2447,8 @@ proc_show_pdrv_ch0(struct seq_file *m, void *v)
/**
* proc_show_pdrv_ch1()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 1.
*/
@@ -2461,8 +2461,8 @@ proc_show_pdrv_ch1(struct seq_file *m, void *v)
/**
* proc_show_pdrv_ch2()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 2.
*/
@@ -2475,8 +2475,8 @@ proc_show_pdrv_ch2(struct seq_file *m, void *v)
/**
* proc_show_pdrv_ch3()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 3.
*/
@@ -2489,10 +2489,10 @@ proc_show_pdrv_ch3(struct seq_file *m, void *v)
/**
* proc_show_rdrv()
- * @m - Synthetic file construction data
- * @adapter - pointer to our soft state
- * @start - starting logical drive to display
- * @end - ending logical drive to display
+ * @m: Synthetic file construction data
+ * @adapter: pointer to our soft state
+ * @start: starting logical drive to display
+ * @end: ending logical drive to display
*
* We do not print the inquiry information since its already available through
* /proc/scsi/scsi interface
@@ -2674,8 +2674,8 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
/**
* proc_show_rdrv_10()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2688,8 +2688,8 @@ proc_show_rdrv_10(struct seq_file *m, void *v)
/**
* proc_show_rdrv_20()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2702,8 +2702,8 @@ proc_show_rdrv_20(struct seq_file *m, void *v)
/**
* proc_show_rdrv_30()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2716,8 +2716,8 @@ proc_show_rdrv_30(struct seq_file *m, void *v)
/**
* proc_show_rdrv_40()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2729,8 +2729,8 @@ proc_show_rdrv_40(struct seq_file *m, void *v)
/**
* mega_create_proc_entry()
- * @index - index in soft state array
- * @parent - parent node for this /proc entry
+ * @index: index in soft state array
+ * @parent: parent node for this /proc entry
*
* Creates /proc entries for our controllers.
*/
@@ -2785,7 +2785,7 @@ static inline void mega_create_proc_entry(int index, struct proc_dir_entry *pare
#endif
-/**
+/*
* megaraid_biosparam()
*
* Return the disk geometry for a particular disk
@@ -2854,7 +2854,7 @@ megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
/**
* mega_init_scb()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Allocate memory for the various pointers in the scb structures:
* scatter-gather list pointer, passthru and extended passthru structure
@@ -2934,8 +2934,8 @@ mega_init_scb(adapter_t *adapter)
/**
* megadev_open()
- * @inode - unused
- * @filep - unused
+ * @inode: unused
+ * @filep: unused
*
* Routines for the character/ioctl interface to the driver. Find out if this
* is a valid open.
@@ -2954,10 +2954,9 @@ megadev_open (struct inode *inode, struct file *filep)
/**
* megadev_ioctl()
- * @inode - Our device inode
- * @filep - unused
- * @cmd - ioctl command
- * @arg - user buffer
+ * @filep: unused
+ * @cmd: ioctl command
+ * @arg: user buffer
*
* ioctl entry point for our private ioctl interface. We move the data in from
* the user space, prepare the command (if necessary, convert the old MIMD
@@ -3370,8 +3369,8 @@ megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/**
* mega_m_to_n()
- * @arg - user address
- * @uioc - new ioctl structure
+ * @arg: user address
+ * @uioc: new ioctl structure
*
* A thin layer to convert older mimd interface ioctl structure to NIT ioctl
* structure
@@ -3496,10 +3495,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
return 0;
}
-/*
+/**
* mega_n_to_m()
- * @arg - user address
- * @mc - mailbox command
+ * @arg: user address
+ * @mc: mailbox command
*
* Updates the status information to the application, depending on application
* conforms to older mimd ioctl interface or newer NIT ioctl interface
@@ -3565,7 +3564,7 @@ mega_n_to_m(void __user *arg, megacmd_t *mc)
/**
* mega_is_bios_enabled()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* issue command to find out if the BIOS is enabled for this controller
*/
@@ -3596,7 +3595,7 @@ mega_is_bios_enabled(adapter_t *adapter)
/**
* mega_enum_raid_scsi()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out what channels are RAID/SCSI. This information is used to
* differentiate the virtual channels and physical channels and to support
@@ -3651,7 +3650,7 @@ mega_enum_raid_scsi(adapter_t *adapter)
/**
* mega_get_boot_drv()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out which device is the boot device. Note, any logical drive or any
* phyical device (e.g., a CDROM) can be designated as a boot device.
@@ -3718,7 +3717,7 @@ mega_get_boot_drv(adapter_t *adapter)
/**
* mega_support_random_del()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this controller supports random deletion and addition of
* logical drives
@@ -3748,7 +3747,7 @@ mega_support_random_del(adapter_t *adapter)
/**
* mega_support_ext_cdb()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this firmware support cdblen > 10
*/
@@ -3776,8 +3775,8 @@ mega_support_ext_cdb(adapter_t *adapter)
/**
* mega_del_logdrv()
- * @adapter - pointer to our soft state
- * @logdrv - logical drive to be deleted
+ * @adapter: pointer to our soft state
+ * @logdrv: logical drive to be deleted
*
* Delete the specified logical drive. It is the responsibility of the user
* app to let the OS know about this operation.
@@ -3862,7 +3861,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)
/**
* mega_get_max_sgl()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out the maximum number of scatter-gather elements supported by this
* version of the firmware
@@ -3908,7 +3907,7 @@ mega_get_max_sgl(adapter_t *adapter)
/**
* mega_support_cluster()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this firmware support cluster calls.
*/
@@ -3950,8 +3949,8 @@ mega_support_cluster(adapter_t *adapter)
#ifdef CONFIG_PROC_FS
/**
* mega_adapinq()
- * @adapter - pointer to our soft state
- * @dma_handle - DMA address of the buffer
+ * @adapter: pointer to our soft state
+ * @dma_handle: DMA address of the buffer
*
* Issue internal commands while interrupts are available.
* We only issue direct mailbox commands from within the driver. ioctl()
@@ -3983,11 +3982,12 @@ mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
}
-/** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
- * @tgt - ID of this device
- * @buf_dma_handle - DMA address of the buffer
+/**
+ * mega_internal_dev_inquiry()
+ * @adapter: pointer to our soft state
+ * @ch: channel for this device
+ * @tgt: ID of this device
+ * @buf_dma_handle: DMA address of the buffer
*
* Issue the scsi inquiry for the specified device.
*/
@@ -4056,9 +4056,9 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
/**
* mega_internal_command()
- * @adapter - pointer to our soft state
- * @mc - the mailbox command
- * @pthru - Passthru structure for DCDB commands
+ * @adapter: pointer to our soft state
+ * @mc: the mailbox command
+ * @pthru: Passthru structure for DCDB commands
*
* Issue the internal commands in interrupt mode.
* The last argument is the address of the passthru structure if the command
Plus a couple of API catch-ups. Fixes the following W=1 kernel build warning(s): drivers/scsi/megaraid.c:133: warning: Function parameter or member 'adapter' not described in 'mega_setup_mailbox' drivers/scsi/megaraid.c:356: warning: Function parameter or member 'adapter' not described in 'mega_runpendq' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'adapter' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:424: warning: Function parameter or member 'cmd' not described in 'mega_allocate_scb' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'adapter' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'cmd' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:456: warning: Function parameter or member 'channel' not described in 'mega_get_ldrv_num' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'adapter' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'cmd' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:519: warning: Function parameter or member 'busy' not described in 'mega_build_cmd' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'adapter' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'scb' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'cmd' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'channel' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:951: warning: Function parameter or member 'target' not described in 'mega_prepare_passthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'adapter' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'scb' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'cmd' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'channel' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'target' not described in 'mega_prepare_extpassthru' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'adapter' not described in 'issue_scb' drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'scb' not described in 'issue_scb' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'adapter' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1176: warning: Function parameter or member 'raw_mbox' not described in 'issue_scb_block' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'irq' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'devp' not described in 'megaraid_isr_iomapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'irq' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'devp' not described in 'megaraid_isr_memmapped' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'adapter' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'completed' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'nstatus' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1413: warning: Function parameter or member 'status' not described in 'mega_cmd_done' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'adapter' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'cmd' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'aor' not described in 'megaraid_abort_and_reset' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'dma_handle' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2031: warning: Function parameter or member 'pdev' not described in 'mega_allocate_inquiry' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'm' not described in 'proc_show_config' drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'v' not described in 'proc_show_config' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'm' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'v' not described in 'proc_show_stat' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'm' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'v' not described in 'proc_show_mbox' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'm' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'v' not described in 'proc_show_rebuild_rate' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'm' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'v' not described in 'proc_show_battery' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'm' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'adapter' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'channel' not described in 'proc_show_pdrv' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch0' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch1' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch2' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'm' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'v' not described in 'proc_show_pdrv_ch3' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'm' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'adapter' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'start' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'end' not described in 'proc_show_rdrv' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_10' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_20' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_30' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'm' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'v' not described in 'proc_show_rdrv_40' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'index' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2739: warning: Function parameter or member 'parent' not described in 'mega_create_proc_entry' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'sdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'bdev' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'capacity' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2796: warning: Function parameter or member 'geom' not described in 'megaraid_biosparam' drivers/scsi/megaraid.c:2865: warning: Function parameter or member 'adapter' not described in 'mega_init_scb' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'inode' not described in 'megadev_open' drivers/scsi/megaraid.c:2945: warning: Function parameter or member 'filep' not described in 'megadev_open' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'filep' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'cmd' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'arg' not described in 'megadev_ioctl' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'arg' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'uioc' not described in 'mega_m_to_n' drivers/scsi/megaraid.c:3574: warning: Function parameter or member 'adapter' not described in 'mega_is_bios_enabled' drivers/scsi/megaraid.c:3607: warning: Function parameter or member 'adapter' not described in 'mega_enum_raid_scsi' drivers/scsi/megaraid.c:3661: warning: Function parameter or member 'adapter' not described in 'mega_get_boot_drv' drivers/scsi/megaraid.c:3728: warning: Function parameter or member 'adapter' not described in 'mega_support_random_del' drivers/scsi/megaraid.c:3757: warning: Function parameter or member 'adapter' not described in 'mega_support_ext_cdb' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'adapter' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3787: warning: Function parameter or member 'logdrv' not described in 'mega_del_logdrv' drivers/scsi/megaraid.c:3872: warning: Function parameter or member 'adapter' not described in 'mega_get_max_sgl' drivers/scsi/megaraid.c:3917: warning: Function parameter or member 'adapter' not described in 'mega_support_cluster' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'adapter' not described in 'mega_adapinq' drivers/scsi/megaraid.c:3962: warning: Function parameter or member 'dma_handle' not described in 'mega_adapinq' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'adapter' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'mc' not described in 'mega_internal_command' drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'pthru' not described in 'mega_internal_command' Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Seokmann.Ju@lsil.com Cc: sju@lsil.com Cc: megaraidlinux.pdl@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/scsi/megaraid.c | 218 ++++++++++++++++++++-------------------- 1 file changed, 109 insertions(+), 109 deletions(-)