@@ -788,6 +788,7 @@ struct _sas_phy {
* @phy: a list of phys that make up this sas_host/expander
* @sas_port_list: list of ports attached to this sas_host/expander
* @port: hba port entry containing node's port number info
+ * @rphy: sas_rphy object of this expander
*/
struct _sas_node {
struct list_head list;
@@ -802,6 +803,7 @@ struct _sas_node {
struct hba_port *port;
struct _sas_phy *phy;
struct list_head sas_port_list;
+ struct sas_rphy *rphy;
};
/**
@@ -6509,6 +6509,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
goto out_fail;
}
sas_expander->parent_dev = &mpt3sas_port->rphy->dev;
+ sas_expander->rphy = mpt3sas_port->rphy;
for (i = 0 ; i < sas_expander->num_phys ; i++) {
if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
@@ -60,6 +60,24 @@
#include "mpt3sas_base.h"
+/**
+ * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to
+ * @phy - sas_phy object
+ *
+ * Return Port number
+ */
+static inline u8
+_transport_get_port_id_by_sas_phy(struct sas_phy *phy)
+{
+ u8 port_id = 0xFF;
+ struct hba_port *port = phy->hostdata;
+
+ if (port)
+ port_id = port->port_id;
+
+ return port_id;
+}
+
/**
* _transport_sas_node_find_by_sas_address - sas node search
* @ioc: per adapter object
@@ -81,6 +99,49 @@ _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
sas_address, port);
}
+/**
+ * _transport_get_port_id_by_rphy - Get Port number from rphy object
+ * @ioc: per adapter object
+ * @rphy: sas_rphy object
+ *
+ * Returns Port number.
+ */
+static u8
+_transport_get_port_id_by_rphy(struct MPT3SAS_ADAPTER *ioc,
+ struct sas_rphy *rphy)
+{
+ struct _sas_node *sas_expander;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u8 port_id = 0xFF;
+
+ if (!rphy)
+ return port_id;
+
+ if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
+ rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) {
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ list_for_each_entry(sas_expander,
+ &ioc->sas_expander_list, list) {
+ if (sas_expander->rphy == rphy) {
+ port_id = sas_expander->port->port_id;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ } else if (rphy->identify.device_type == SAS_END_DEVICE) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy);
+ if (sas_device) {
+ port_id = sas_device->port->port_id;
+ sas_device_put(sas_device);
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ }
+
+ return port_id;
+}
+
/**
* _transport_convert_phy_link_rate -
* @link_rate: link rate returned from mpt firmware
@@ -289,7 +350,7 @@ struct rep_manu_reply {
*/
static int
_transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
- u64 sas_address, struct sas_expander_device *edev)
+ u64 sas_address, struct sas_expander_device *edev, u8 port_id)
{
Mpi2SmpPassthroughRequest_t *mpi_request;
Mpi2SmpPassthroughReply_t *mpi_reply;
@@ -356,7 +417,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
+ mpi_request->PhysicalPort = port_id;
mpi_request->SASAddress = cpu_to_le64(sas_address);
mpi_request->RequestDataLength = cpu_to_le16(data_out_sz);
psge = &mpi_request->SGL;
@@ -772,7 +833,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
_transport_expander_report_manufacture(ioc,
mpt3sas_port->remote_identify.sas_address,
- rphy_to_expander_device(rphy));
+ rphy_to_expander_device(rphy), hba_port->port_id);
return mpt3sas_port;
out_fail:
@@ -923,6 +984,7 @@ mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
phy->maximum_linkrate = _transport_convert_phy_link_rate(
phy_pg0.ProgrammedLinkRate >> 4);
+ phy->hostdata = mpt3sas_phy->port;
if ((sas_phy_add(phy))) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -993,6 +1055,7 @@ mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
phy->maximum_linkrate = _transport_convert_phy_link_rate(
expander_pg1.ProgrammedLinkRate >> 4);
+ phy->hostdata = mpt3sas_phy->port;
if ((sas_phy_add(phy))) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -1197,7 +1260,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
+ mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
@@ -1493,7 +1556,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
+ mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address);
@@ -1983,7 +2046,7 @@ _transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
- mpi_request->PhysicalPort = 0xFF;
+ mpi_request->PhysicalPort = _transport_get_port_id_by_rphy(ioc, rphy);
mpi_request->SASAddress = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
Current driver is always setting PhysicalPort field as 0xFF for SMPPassthrough Request message. So in zoning topologies this SMPPassthrough command always operates on devices in one zone (default zone) even when user issues SMP command for other zone drives. Now helper functions _transport_get_port_id_by_rphy() & _transport_get_port_id_by_sas_phy() are defined to get Physical Port number from sas_rphy & sas_phy respectively for SMPPassthrough request message so that SMP Passthrough request message is send to intended zone device. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 2 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 + drivers/scsi/mpt3sas/mpt3sas_transport.c | 75 ++++++++++++++++++++++-- 3 files changed, 72 insertions(+), 6 deletions(-)