diff mbox series

[06/24] mpi3mr: add support of event handling part-1

Message ID 20201222101156.98308-7-kashyap.desai@broadcom.com (mailing list archive)
State Changes Requested
Headers show
Series Introducing mpi3mr driver | expand

Commit Message

Kashyap Desai Dec. 22, 2020, 10:11 a.m. UTC
Firmware can report various MPI Events.
Support for certain Events (as listed below) are enabled in the driver
and their processing in driver is covered in this patch.

MPI3_EVENT_DEVICE_ADDED
MPI3_EVENT_DEVICE_INFO_CHANGED
MPI3_EVENT_DEVICE_STATUS_CHANGE
MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
MPI3_EVENT_SAS_DISCOVERY
MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR

Key support in this patch is device add/removal.

Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: sathya.prakash@broadcom.com
---
 drivers/scsi/mpi3mr/mpi/mpi30_api.h  |    2 +
 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 2721 ++++++++++++++++++++++++++
 drivers/scsi/mpi3mr/mpi/mpi30_sas.h  |   46 +
 drivers/scsi/mpi3mr/mpi3mr.h         |  195 ++
 drivers/scsi/mpi3mr/mpi3mr_fw.c      |  177 +-
 drivers/scsi/mpi3mr/mpi3mr_os.c      | 1452 ++++++++++++++
 6 files changed, 4592 insertions(+), 1 deletion(-)
 create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
 create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h

Comments

kernel test robot Dec. 27, 2020, 1:14 p.m. UTC | #1
Hi Kashyap,

I love your patch! Perhaps something to improve:

[auto build test WARNING on mkp-scsi/for-next]
[also build test WARNING on scsi/for-next v5.10 next-20201223]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Kashyap-Desai/Introducing-mpi3mr-driver/20201222-181732
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
config: powerpc-allyesconfig (attached as .config)
compiler: powerpc64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/f353c97f9e813b38c4546df7698017174df5a559
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Kashyap-Desai/Introducing-mpi3mr-driver/20201222-181732
        git checkout f353c97f9e813b38c4546df7698017174df5a559
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=powerpc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/scsi/mpi3mr/mpi3mr_os.c:281:6: warning: no previous prototype for 'mpi3mr_cleanup_fwevt_list' [-Wmissing-prototypes]
     281 | void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/scsi/mpi3mr/mpi3mr_os.c:412:24: warning: no previous prototype for 'mpi3mr_get_tgtdev_by_handle' [-Wmissing-prototypes]
     412 | struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
         |                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/scsi/mpi3mr/mpi3mr_os.c:460:24: warning: no previous prototype for 'mpi3mr_get_tgtdev_by_perst_id' [-Wmissing-prototypes]
     460 | struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id(
         |                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/scsi/mpi3mr/mpi3mr_os.c:580:6: warning: no previous prototype for 'mpi3mr_rfresh_tgtdevs' [-Wmissing-prototypes]
     580 | void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc)
         |      ^~~~~~~~~~~~~~~~~~~~~
   drivers/scsi/mpi3mr/mpi3mr_os.c: In function 'mpi3mr_devstatuschg_evt_bh':
>> drivers/scsi/mpi3mr/mpi3mr_os.c:689:32: warning: variable 'scsi_tgt_priv_data' set but not used [-Wunused-but-set-variable]
     689 |  struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
         |                                ^~~~~~~~~~~~~~~~~~
   drivers/scsi/mpi3mr/mpi3mr_os.c: At top level:
   drivers/scsi/mpi3mr/mpi3mr_os.c:952:6: warning: no previous prototype for 'mpi3mr_flush_delayed_rmhs_list' [-Wmissing-prototypes]
     952 | void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +/mpi3mr_get_tgtdev_by_handle +412 drivers/scsi/mpi3mr/mpi3mr_os.c

   271	
   272	/**
   273	 * mpi3mr_cleanup_fwevt_list - Cleanup firmware event list
   274	 * @mrioc: Adapter instance reference
   275	 *
   276	 * Flush all pending firmware events from the firmware event
   277	 * list.
   278	 *
   279	 * Return: Nothing.
   280	 */
 > 281	void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
   282	{
   283		struct mpi3mr_fwevt *fwevt = NULL;
   284	
   285		if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) ||
   286		    !mrioc->fwevt_worker_thread || in_interrupt())
   287			return;
   288	
   289		while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) ||
   290		    (fwevt = mrioc->current_event)) {
   291			/*
   292			 * Wait on the fwevt to complete. If this returns 1, then
   293			 * the event was never executed, and we need a put for the
   294			 * reference the work had on the fwevt.
   295			 *
   296			 * If it did execute, we wait for it to finish, and the put will
   297			 * happen from mpi3mr_process_fwevt()
   298			 */
   299			if (cancel_work_sync(&fwevt->work)) {
   300				/*
   301				 * Put fwevt reference count after
   302				 * dequeuing it from worker queue
   303				 */
   304				mpi3mr_fwevt_put(fwevt);
   305				/*
   306				 * Put fwevt reference count to neutralize
   307				 * kref_init increment
   308				 */
   309				mpi3mr_fwevt_put(fwevt);
   310			}
   311		}
   312	}
   313	
   314	/**
   315	 * mpi3mr_alloc_tgtdev - target device allocator
   316	 *
   317	 * Allocate target device instance and initialize the reference
   318	 * count
   319	 *
   320	 * Return: target device instance.
   321	 */
   322	static struct mpi3mr_tgt_dev *mpi3mr_alloc_tgtdev(void)
   323	{
   324		struct mpi3mr_tgt_dev *tgtdev;
   325	
   326		tgtdev = kzalloc(sizeof(*tgtdev), GFP_ATOMIC);
   327		if (!tgtdev)
   328			return NULL;
   329		kref_init(&tgtdev->ref_count);
   330		return tgtdev;
   331	}
   332	
   333	/**
   334	 * mpi3mr_tgtdev_add_to_list -Add tgtdevice to the list
   335	 * @mrioc: Adapter instance reference
   336	 * @tgtdev: Target device
   337	 *
   338	 * Add the target device to the target device list
   339	 *
   340	 * Return: Nothing.
   341	 */
   342	static void mpi3mr_tgtdev_add_to_list(struct mpi3mr_ioc *mrioc,
   343		struct mpi3mr_tgt_dev *tgtdev)
   344	{
   345		unsigned long flags;
   346	
   347		spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
   348		mpi3mr_tgtdev_get(tgtdev);
   349		INIT_LIST_HEAD(&tgtdev->list);
   350		list_add_tail(&tgtdev->list, &mrioc->tgtdev_list);
   351		spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
   352	}
   353	
   354	/**
   355	 * mpi3mr_tgtdev_del_from_list -Delete tgtdevice from the list
   356	 * @mrioc: Adapter instance reference
   357	 * @tgtdev: Target device
   358	 *
   359	 * Remove the target device from the target device list
   360	 *
   361	 * Return: Nothing.
   362	 */
   363	static void mpi3mr_tgtdev_del_from_list(struct mpi3mr_ioc *mrioc,
   364		struct mpi3mr_tgt_dev *tgtdev)
   365	{
   366		unsigned long flags;
   367	
   368		spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
   369		if (!list_empty(&tgtdev->list)) {
   370			list_del_init(&tgtdev->list);
   371			mpi3mr_tgtdev_put(tgtdev);
   372		}
   373		spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
   374	}
   375	
   376	/**
   377	 * __mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
   378	 * @mrioc: Adapter instance reference
   379	 * @handle: Device handle
   380	 *
   381	 * Accessor to retrieve target device from the device handle.
   382	 * Non Lock version
   383	 *
   384	 * Return: Target device reference.
   385	 */
   386	static struct mpi3mr_tgt_dev  *__mpi3mr_get_tgtdev_by_handle(
   387		struct mpi3mr_ioc *mrioc, u16 handle)
   388	{
   389		struct mpi3mr_tgt_dev *tgtdev;
   390	
   391		assert_spin_locked(&mrioc->tgtdev_lock);
   392		list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
   393			if (tgtdev->dev_handle == handle)
   394				goto found_tgtdev;
   395		return NULL;
   396	
   397	found_tgtdev:
   398		mpi3mr_tgtdev_get(tgtdev);
   399		return tgtdev;
   400	}
   401	
   402	/**
   403	 * mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
   404	 * @mrioc: Adapter instance reference
   405	 * @handle: Device handle
   406	 *
   407	 * Accessor to retrieve target device from the device handle.
   408	 * Lock version
   409	 *
   410	 * Return: Target device reference.
   411	 */
 > 412	struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
   413		struct mpi3mr_ioc *mrioc, u16 handle)
   414	{
   415		struct mpi3mr_tgt_dev *tgtdev;
   416		unsigned long flags;
   417	
   418		spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
   419		tgtdev = __mpi3mr_get_tgtdev_by_handle(mrioc, handle);
   420		spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
   421		return tgtdev;
   422	}
   423	
   424	/**
   425	 * __mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persist ID
   426	 * @mrioc: Adapter instance reference
   427	 * @persist_id: Persistent ID
   428	 *
   429	 * Accessor to retrieve target device from the Persistent ID.
   430	 * Non Lock version
   431	 *
   432	 * Return: Target device reference.
   433	 */
   434	static struct mpi3mr_tgt_dev  *__mpi3mr_get_tgtdev_by_perst_id(
   435		struct mpi3mr_ioc *mrioc, u16 persist_id)
   436	{
   437		struct mpi3mr_tgt_dev *tgtdev;
   438	
   439		assert_spin_locked(&mrioc->tgtdev_lock);
   440		list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
   441			if (tgtdev->perst_id == persist_id)
   442				goto found_tgtdev;
   443		return NULL;
   444	
   445	found_tgtdev:
   446		mpi3mr_tgtdev_get(tgtdev);
   447		return tgtdev;
   448	}
   449	
   450	/**
   451	 * mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persistent ID
   452	 * @mrioc: Adapter instance reference
   453	 * @persist_id: Persistent ID
   454	 *
   455	 * Accessor to retrieve target device from the Persistent ID.
   456	 * Lock version
   457	 *
   458	 * Return: Target device reference.
   459	 */
 > 460	struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id(
   461		struct mpi3mr_ioc *mrioc, u16 persist_id)
   462	{
   463		struct mpi3mr_tgt_dev *tgtdev;
   464		unsigned long flags;
   465	
   466		spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
   467		tgtdev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, persist_id);
   468		spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
   469		return tgtdev;
   470	}
   471	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Tomas Henzl Feb. 22, 2021, 3:31 p.m. UTC | #2
On 12/22/20 11:11 AM, Kashyap Desai wrote:
> Firmware can report various MPI Events.
> Support for certain Events (as listed below) are enabled in the driver
> and their processing in driver is covered in this patch.
> 
> MPI3_EVENT_DEVICE_ADDED
> MPI3_EVENT_DEVICE_INFO_CHANGED
> MPI3_EVENT_DEVICE_STATUS_CHANGE
> MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
> MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
> MPI3_EVENT_SAS_DISCOVERY
> MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
> 
> Key support in this patch is device add/removal.
> 
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Cc: sathya.prakash@broadcom.com
> ---
...
> + */
> +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
> +{
> +	struct mpi3mr_fwevt *fwevt = NULL;
> +
> +	if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) ||
> +	    !mrioc->fwevt_worker_thread || in_interrupt())
The in_interrup macro is deprecated and should not be used in new code.
Is it at all possible to call the mpi3mr_cleanup_fwevt_list from
interrupt context?

> +		return;
> +
> +	while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) ||
> +	    (fwevt = mrioc->current_event)) {
> +		/*
> +		 * Wait on the fwevt to complete. If this returns 1, then
> +		 * the event was never executed, and we need a put for the
> +		 * reference the work had on the fwevt.
> +		 *
> +		 * If it did execute, we wait for it to finish, and the put will
> +		 * happen from mpi3mr_process_fwevt()
> +		 */
> +		if (cancel_work_sync(&fwevt->work)) {
> +			/*
> +			 * Put fwevt reference count after
> +			 * dequeuing it from worker queue
> +			 */
> +			mpi3mr_fwevt_put(fwevt);
> +			/*
> +			 * Put fwevt reference count to neutralize
> +			 * kref_init increment
> +			 */
> +			mpi3mr_fwevt_put(fwevt);
> +		}
> +	}
> +}
Kashyap Desai Feb. 25, 2021, 1:36 p.m. UTC | #3
> ...
> > + */
> > +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc) {
> > +	struct mpi3mr_fwevt *fwevt = NULL;
> > +
> > +	if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) ||
> > +	    !mrioc->fwevt_worker_thread || in_interrupt())
> The in_interrup macro is deprecated and should not be used in new code.
> Is it at all possible to call the mpi3mr_cleanup_fwevt_list from
interrupt
> context?

I agree with you. In_interrupt() check is safe to remove. I will take care
while sending V2.

Kashyap
>
> > +		return;
> > +
> > +	while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) ||
> > +	    (fwevt = mrioc->current_event)) {
> > +		/*
> > +		 * Wait on the fwevt to complete. If this returns 1, then
> > +		 * the event was never executed, and we need a put for the
> > +		 * reference the work had on the fwevt.
> > +		 *
> > +		 * If it did execute, we wait for it to finish, and the
put will
> > +		 * happen from mpi3mr_process_fwevt()
> > +		 */
> > +		if (cancel_work_sync(&fwevt->work)) {
> > +			/*
> > +			 * Put fwevt reference count after
> > +			 * dequeuing it from worker queue
> > +			 */
> > +			mpi3mr_fwevt_put(fwevt);
> > +			/*
> > +			 * Put fwevt reference count to neutralize
> > +			 * kref_init increment
> > +			 */
> > +			mpi3mr_fwevt_put(fwevt);
> > +		}
> > +	}
> > +}
Hannes Reinecke March 1, 2021, 6:47 a.m. UTC | #4
On 12/22/20 11:11 AM, Kashyap Desai wrote:
> Firmware can report various MPI Events.
> Support for certain Events (as listed below) are enabled in the driver
> and their processing in driver is covered in this patch.
> 
> MPI3_EVENT_DEVICE_ADDED
> MPI3_EVENT_DEVICE_INFO_CHANGED
> MPI3_EVENT_DEVICE_STATUS_CHANGE
> MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
> MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
> MPI3_EVENT_SAS_DISCOVERY
> MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
> 
> Key support in this patch is device add/removal.
> 
> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
> Cc: sathya.prakash@broadcom.com
> ---
>   drivers/scsi/mpi3mr/mpi/mpi30_api.h  |    2 +
>   drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 2721 ++++++++++++++++++++++++++
>   drivers/scsi/mpi3mr/mpi/mpi30_sas.h  |   46 +
>   drivers/scsi/mpi3mr/mpi3mr.h         |  195 ++
>   drivers/scsi/mpi3mr/mpi3mr_fw.c      |  177 +-
>   drivers/scsi/mpi3mr/mpi3mr_os.c      | 1452 ++++++++++++++
>   6 files changed, 4592 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
>   create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h
> 
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> index ca07387536d3..7bdd5aeb23be 100644
> --- a/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
> @@ -14,8 +14,10 @@
>   
>   #include "mpi30_type.h"
>   #include "mpi30_transport.h"
> +#include "mpi30_cnfg.h"
>   #include "mpi30_image.h"
>   #include "mpi30_init.h"
>   #include "mpi30_ioc.h"
> +#include "mpi30_sas.h"
>   
>   #endif  /* MPI30_API_H */
> diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
> new file mode 100644
> index 000000000000..3badb1bb85b1
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
> @@ -0,0 +1,2721 @@
> +/*
> + *  Copyright 2017-2020 Broadcom Inc. All rights reserved.
> + *
> + *           Name: mpi30_cnfg.h
> + *    Description: Contains definitions for Configuration messages and pages
> + *  Creation Date: 03/15/2017
> + *        Version: 03.00.00
> + */
> +#ifndef MPI30_CNFG_H
> +#define MPI30_CNFG_H     1
> +
> +/*****************************************************************************
> + *              Configuration Page Types                                     *
> + ****************************************************************************/
> +#define MPI3_CONFIG_PAGETYPE_IO_UNIT                    (0x00)
> +#define MPI3_CONFIG_PAGETYPE_MANUFACTURING              (0x01)
> +#define MPI3_CONFIG_PAGETYPE_IOC                        (0x02)
> +#define MPI3_CONFIG_PAGETYPE_UEFI_BSD                   (0x03)
> +#define MPI3_CONFIG_PAGETYPE_SECURITY                   (0x04)
> +#define MPI3_CONFIG_PAGETYPE_ENCLOSURE                  (0x11)
> +#define MPI3_CONFIG_PAGETYPE_DEVICE                     (0x12)
> +#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT                (0x20)
> +#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER               (0x21)
> +#define MPI3_CONFIG_PAGETYPE_SAS_PHY                    (0x23)
> +#define MPI3_CONFIG_PAGETYPE_SAS_PORT                   (0x24)
> +#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT               (0x30)
> +#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH                (0x31)
> +#define MPI3_CONFIG_PAGETYPE_PCIE_LINK                  (0x33)
> +
> +/*****************************************************************************
> + *              Configuration Page Attributes                                *
> + ****************************************************************************/
> +#define MPI3_CONFIG_PAGEATTR_MASK                       (0xF0)
> +#define MPI3_CONFIG_PAGEATTR_READ_ONLY                  (0x00)
> +#define MPI3_CONFIG_PAGEATTR_CHANGEABLE                 (0x10)
> +#define MPI3_CONFIG_PAGEATTR_PERSISTENT                 (0x20)
> +
> +/*****************************************************************************
> + *              Configuration Page Actions                                   *
> + ****************************************************************************/
> +#define MPI3_CONFIG_ACTION_PAGE_HEADER                  (0x00)
> +#define MPI3_CONFIG_ACTION_READ_DEFAULT                 (0x01)
> +#define MPI3_CONFIG_ACTION_READ_CURRENT                 (0x02)
> +#define MPI3_CONFIG_ACTION_WRITE_CURRENT                (0x03)
> +#define MPI3_CONFIG_ACTION_READ_PERSISTENT              (0x04)
> +#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT             (0x05)
> +
> +/*****************************************************************************
> + *              Configuration Page Addressing                                *
> + ****************************************************************************/
> +
> +/**** Device PageAddress Format ****/
> +#define MPI3_DEVICE_PGAD_FORM_MASK                      (0xF0000000)
> +#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE           (0x00000000)
> +#define MPI3_DEVICE_PGAD_FORM_HANDLE                    (0x20000000)
> +#define MPI3_DEVICE_PGAD_HANDLE_MASK                    (0x0000FFFF)
> +
> +/**** SAS Expander PageAddress Format ****/
> +#define MPI3_SAS_EXPAND_PGAD_FORM_MASK                  (0xF0000000)
> +#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE       (0x00000000)
> +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM        (0x10000000)
> +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE                (0x20000000)
> +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK                (0x00FF0000)
> +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT               (16)
> +#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK                (0x0000FFFF)
> +
> +/**** SAS Phy PageAddress Format ****/
> +#define MPI3_SAS_PHY_PGAD_FORM_MASK                     (0xF0000000)
> +#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER               (0x00000000)
> +#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK               (0x000000FF)
> +
> +/**** SAS Port PageAddress Format ****/
> +#define MPI3_SASPORT_PGAD_FORM_MASK                     (0xF0000000)
> +#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT            (0x00000000)
> +#define MPI3_SASPORT_PGAD_FORM_PORT_NUM                 (0x10000000)
> +#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK              (0x000000FF)
> +
> +/**** Enclosure PageAddress Format ****/
> +#define MPI3_ENCLOS_PGAD_FORM_MASK                      (0xF0000000)
> +#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE           (0x00000000)
> +#define MPI3_ENCLOS_PGAD_FORM_HANDLE                    (0x10000000)
> +#define MPI3_ENCLOS_PGAD_HANDLE_MASK                    (0x0000FFFF)
> +
> +/**** PCIe Switch PageAddress Format ****/
> +#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK                 (0xF0000000)
> +#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE      (0x00000000)
> +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM      (0x10000000)
> +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE               (0x20000000)
> +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK              (0x00FF0000)
> +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT             (16)
> +#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK               (0x0000FFFF)
> +
> +/**** PCIe Link PageAddress Format ****/
> +#define MPI3_PCIE_LINK_PGAD_FORM_MASK                   (0xF0000000)
> +#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK          (0x00000000)
> +#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM               (0x10000000)
> +#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK                (0x000000FF)
> +
> +/**** Security PageAddress Format ****/
> +#define MPI3_SECURITY_PGAD_FORM_MASK                    (0xF0000000)
> +#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT           (0x00000000)
> +#define MPI3_SECURITY_PGAD_FORM_SOT_NUM                 (0x10000000)
> +#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK              (0x0000FF00)
> +#define MPI3_SECURITY_PGAD_SLOT_MASK                    (0x000000FF)
> +
> +/*****************************************************************************
> + *              Configuration Request Message                                *
> + ****************************************************************************/
> +typedef struct _MPI3_CONFIG_REQUEST {
> +    U16             HostTag;                            /* 0x00 */
> +    U8              IOCUseOnly02;                       /* 0x02 */
> +    U8              Function;                           /* 0x03 */
> +    U16             IOCUseOnly04;                       /* 0x04 */
> +    U8              IOCUseOnly06;                       /* 0x06 */
> +    U8              MsgFlags;                           /* 0x07 */
> +    U16             ChangeCount;                        /* 0x08 */
> +    U16             Reserved0A;                         /* 0x0A */
> +    U8              PageVersion;                        /* 0x0C */
> +    U8              PageNumber;                         /* 0x0D */
> +    U8              PageType;                           /* 0x0E */
> +    U8              Action;                             /* 0x0F */
> +    U32             PageAddress;                        /* 0x10 */
> +    U16             PageLength;                         /* 0x14 */
> +    U16             Reserved16;                         /* 0x16 */
> +    U32             Reserved18[2];                      /* 0x18 */
> +    MPI3_SGE_UNION  SGL;                                /* 0x20 */
> +} MPI3_CONFIG_REQUEST, MPI3_POINTER PTR_MPI3_CONFIG_REQUEST,
> +  Mpi3ConfigRequest_t, MPI3_POINTER pMpi3ConfigRequest_t;
> +
Can you please restrict yourself to _one_ set of codingstyle?
IE please keep your typedefs to all caps, or mixed caps.
But having both is just silly.

Cheers,

Hannes
diff mbox series

Patch

diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
index ca07387536d3..7bdd5aeb23be 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_api.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
@@ -14,8 +14,10 @@ 
 
 #include "mpi30_type.h"
 #include "mpi30_transport.h"
+#include "mpi30_cnfg.h"
 #include "mpi30_image.h"
 #include "mpi30_init.h"
 #include "mpi30_ioc.h"
+#include "mpi30_sas.h"
 
 #endif  /* MPI30_API_H */
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
new file mode 100644
index 000000000000..3badb1bb85b1
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
@@ -0,0 +1,2721 @@ 
+/*
+ *  Copyright 2017-2020 Broadcom Inc. All rights reserved.
+ *
+ *           Name: mpi30_cnfg.h
+ *    Description: Contains definitions for Configuration messages and pages
+ *  Creation Date: 03/15/2017
+ *        Version: 03.00.00
+ */
+#ifndef MPI30_CNFG_H
+#define MPI30_CNFG_H     1
+
+/*****************************************************************************
+ *              Configuration Page Types                                     *
+ ****************************************************************************/
+#define MPI3_CONFIG_PAGETYPE_IO_UNIT                    (0x00)
+#define MPI3_CONFIG_PAGETYPE_MANUFACTURING              (0x01)
+#define MPI3_CONFIG_PAGETYPE_IOC                        (0x02)
+#define MPI3_CONFIG_PAGETYPE_UEFI_BSD                   (0x03)
+#define MPI3_CONFIG_PAGETYPE_SECURITY                   (0x04)
+#define MPI3_CONFIG_PAGETYPE_ENCLOSURE                  (0x11)
+#define MPI3_CONFIG_PAGETYPE_DEVICE                     (0x12)
+#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT                (0x20)
+#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER               (0x21)
+#define MPI3_CONFIG_PAGETYPE_SAS_PHY                    (0x23)
+#define MPI3_CONFIG_PAGETYPE_SAS_PORT                   (0x24)
+#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT               (0x30)
+#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH                (0x31)
+#define MPI3_CONFIG_PAGETYPE_PCIE_LINK                  (0x33)
+
+/*****************************************************************************
+ *              Configuration Page Attributes                                *
+ ****************************************************************************/
+#define MPI3_CONFIG_PAGEATTR_MASK                       (0xF0)
+#define MPI3_CONFIG_PAGEATTR_READ_ONLY                  (0x00)
+#define MPI3_CONFIG_PAGEATTR_CHANGEABLE                 (0x10)
+#define MPI3_CONFIG_PAGEATTR_PERSISTENT                 (0x20)
+
+/*****************************************************************************
+ *              Configuration Page Actions                                   *
+ ****************************************************************************/
+#define MPI3_CONFIG_ACTION_PAGE_HEADER                  (0x00)
+#define MPI3_CONFIG_ACTION_READ_DEFAULT                 (0x01)
+#define MPI3_CONFIG_ACTION_READ_CURRENT                 (0x02)
+#define MPI3_CONFIG_ACTION_WRITE_CURRENT                (0x03)
+#define MPI3_CONFIG_ACTION_READ_PERSISTENT              (0x04)
+#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT             (0x05)
+
+/*****************************************************************************
+ *              Configuration Page Addressing                                *
+ ****************************************************************************/
+
+/**** Device PageAddress Format ****/
+#define MPI3_DEVICE_PGAD_FORM_MASK                      (0xF0000000)
+#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE           (0x00000000)
+#define MPI3_DEVICE_PGAD_FORM_HANDLE                    (0x20000000)
+#define MPI3_DEVICE_PGAD_HANDLE_MASK                    (0x0000FFFF)
+
+/**** SAS Expander PageAddress Format ****/
+#define MPI3_SAS_EXPAND_PGAD_FORM_MASK                  (0xF0000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE       (0x00000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM        (0x10000000)
+#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE                (0x20000000)
+#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK                (0x00FF0000)
+#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT               (16)
+#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK                (0x0000FFFF)
+
+/**** SAS Phy PageAddress Format ****/
+#define MPI3_SAS_PHY_PGAD_FORM_MASK                     (0xF0000000)
+#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER               (0x00000000)
+#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK               (0x000000FF)
+
+/**** SAS Port PageAddress Format ****/
+#define MPI3_SASPORT_PGAD_FORM_MASK                     (0xF0000000)
+#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT            (0x00000000)
+#define MPI3_SASPORT_PGAD_FORM_PORT_NUM                 (0x10000000)
+#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK              (0x000000FF)
+
+/**** Enclosure PageAddress Format ****/
+#define MPI3_ENCLOS_PGAD_FORM_MASK                      (0xF0000000)
+#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE           (0x00000000)
+#define MPI3_ENCLOS_PGAD_FORM_HANDLE                    (0x10000000)
+#define MPI3_ENCLOS_PGAD_HANDLE_MASK                    (0x0000FFFF)
+
+/**** PCIe Switch PageAddress Format ****/
+#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK                 (0xF0000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE      (0x00000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM      (0x10000000)
+#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE               (0x20000000)
+#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK              (0x00FF0000)
+#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT             (16)
+#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK               (0x0000FFFF)
+
+/**** PCIe Link PageAddress Format ****/
+#define MPI3_PCIE_LINK_PGAD_FORM_MASK                   (0xF0000000)
+#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK          (0x00000000)
+#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM               (0x10000000)
+#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK                (0x000000FF)
+
+/**** Security PageAddress Format ****/
+#define MPI3_SECURITY_PGAD_FORM_MASK                    (0xF0000000)
+#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT           (0x00000000)
+#define MPI3_SECURITY_PGAD_FORM_SOT_NUM                 (0x10000000)
+#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK              (0x0000FF00)
+#define MPI3_SECURITY_PGAD_SLOT_MASK                    (0x000000FF)
+
+/*****************************************************************************
+ *              Configuration Request Message                                *
+ ****************************************************************************/
+typedef struct _MPI3_CONFIG_REQUEST {
+    U16             HostTag;                            /* 0x00 */
+    U8              IOCUseOnly02;                       /* 0x02 */
+    U8              Function;                           /* 0x03 */
+    U16             IOCUseOnly04;                       /* 0x04 */
+    U8              IOCUseOnly06;                       /* 0x06 */
+    U8              MsgFlags;                           /* 0x07 */
+    U16             ChangeCount;                        /* 0x08 */
+    U16             Reserved0A;                         /* 0x0A */
+    U8              PageVersion;                        /* 0x0C */
+    U8              PageNumber;                         /* 0x0D */
+    U8              PageType;                           /* 0x0E */
+    U8              Action;                             /* 0x0F */
+    U32             PageAddress;                        /* 0x10 */
+    U16             PageLength;                         /* 0x14 */
+    U16             Reserved16;                         /* 0x16 */
+    U32             Reserved18[2];                      /* 0x18 */
+    MPI3_SGE_UNION  SGL;                                /* 0x20 */
+} MPI3_CONFIG_REQUEST, MPI3_POINTER PTR_MPI3_CONFIG_REQUEST,
+  Mpi3ConfigRequest_t, MPI3_POINTER pMpi3ConfigRequest_t;
+
+/*****************************************************************************
+ *              Configuration Pages                                          *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              Configuration Page Header                                    *
+ ****************************************************************************/
+typedef struct _MPI3_CONFIG_PAGE_HEADER {
+    U8              PageVersion;                        /* 0x00 */
+    U8              Reserved01;                         /* 0x01 */
+    U8              PageNumber;                         /* 0x02 */
+    U8              PageAttribute;                      /* 0x03 */
+    U16             PageLength;                         /* 0x04 */
+    U8              PageType;                           /* 0x06 */
+    U8              Reserved07;                         /* 0x07 */
+} MPI3_CONFIG_PAGE_HEADER, MPI3_POINTER PTR_MPI3_CONFIG_PAGE_HEADER,
+  Mpi3ConfigPageHeader_t, MPI3_POINTER pMpi3ConfigPageHeader_t;
+
+/*****************************************************************************
+ *              Common definitions used by Configuration Pages           *
+ ****************************************************************************/
+
+/**** Defines for Negotiated Link Rates ****/
+#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK             (0xF0)
+#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT            (4)
+#define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK            (0x0F)
+#define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE        (0x00)
+#define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED             (0x01)
+#define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED       (0x02)
+#define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
+#define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
+#define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
+#define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
+#define MPI3_SAS_NEG_LINK_RATE_1_5                      (0x08)
+#define MPI3_SAS_NEG_LINK_RATE_3_0                      (0x09)
+#define MPI3_SAS_NEG_LINK_RATE_6_0                      (0x0A)
+#define MPI3_SAS_NEG_LINK_RATE_12_0                     (0x0B)
+#define MPI3_SAS_NEG_LINK_RATE_22_5                     (0x0C)
+
+/**** Defines for the AttachedPhyInfo field ****/
+#define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT       (0x00000040)
+#define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS        (0x00000020)
+#define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE           (0x00000010)
+
+#define MPI3_SAS_APHYINFO_REASON_MASK                   (0x0000000F)
+#define MPI3_SAS_APHYINFO_REASON_UNKNOWN                (0x00000000)
+#define MPI3_SAS_APHYINFO_REASON_POWER_ON               (0x00000001)
+#define MPI3_SAS_APHYINFO_REASON_HARD_RESET             (0x00000002)
+#define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL        (0x00000003)
+#define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC           (0x00000004)
+#define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ       (0x00000005)
+#define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER    (0x00000006)
+#define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT          (0x00000007)
+#define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED       (0x00000008)
+#define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC       (0x00000009)
+
+/**** Defines for the PhyInfo field ****/
+#define MPI3_SAS_PHYINFO_STATUS_MASK                    (0xC0000000)
+#define MPI3_SAS_PHYINFO_STATUS_SHIFT                   (30)
+#define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE              (0x00000000)
+#define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST               (0x40000000)
+#define MPI3_SAS_PHYINFO_STATUS_VACANT                  (0x80000000)
+
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE     (0x00000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL    (0x08000000)
+#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER    (0x10000000)
+
+#define MPI3_SAS_PHYINFO_REASON_MASK                    (0x000F0000)
+#define MPI3_SAS_PHYINFO_REASON_UNKNOWN                 (0x00000000)
+#define MPI3_SAS_PHYINFO_REASON_POWER_ON                (0x00010000)
+#define MPI3_SAS_PHYINFO_REASON_HARD_RESET              (0x00020000)
+#define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL         (0x00030000)
+#define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC            (0x00040000)
+#define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ        (0x00050000)
+#define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER     (0x00060000)
+#define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT           (0x00070000)
+#define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED        (0x00080000)
+#define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC        (0x00090000)
+
+#define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE               (0x00004000)
+#define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT     (0x00002000)
+#define MPI3_SAS_PHYINFO_VIRTUAL_PHY                    (0x00001000)
+
+#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK      (0x00000F00)
+#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT     (8)
+
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK         (0x000000F0)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT       (0x00000000)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE  (0x00000010)
+#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE        (0x00000020)
+
+/**** Defines for the ProgrammedLinkRate field ****/
+#define MPI3_SAS_PRATE_MAX_RATE_MASK                    (0xF0)
+#define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI3_SAS_PRATE_MAX_RATE_1_5                     (0x80)
+#define MPI3_SAS_PRATE_MAX_RATE_3_0                     (0x90)
+#define MPI3_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
+#define MPI3_SAS_PRATE_MAX_RATE_12_0                    (0xB0)
+#define MPI3_SAS_PRATE_MAX_RATE_22_5                    (0xC0)
+#define MPI3_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
+#define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
+#define MPI3_SAS_PRATE_MIN_RATE_1_5                     (0x08)
+#define MPI3_SAS_PRATE_MIN_RATE_3_0                     (0x09)
+#define MPI3_SAS_PRATE_MIN_RATE_6_0                     (0x0A)
+#define MPI3_SAS_PRATE_MIN_RATE_12_0                    (0x0B)
+#define MPI3_SAS_PRATE_MIN_RATE_22_5                    (0x0C)
+
+/**** Defines for the HwLinkRate field ****/
+#define MPI3_SAS_HWRATE_MAX_RATE_MASK                   (0xF0)
+#define MPI3_SAS_HWRATE_MAX_RATE_1_5                    (0x80)
+#define MPI3_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
+#define MPI3_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
+#define MPI3_SAS_HWRATE_MAX_RATE_12_0                   (0xB0)
+#define MPI3_SAS_HWRATE_MAX_RATE_22_5                   (0xC0)
+#define MPI3_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
+#define MPI3_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
+#define MPI3_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
+#define MPI3_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)
+#define MPI3_SAS_HWRATE_MIN_RATE_12_0                   (0x0B)
+#define MPI3_SAS_HWRATE_MIN_RATE_22_5                   (0x0C)
+
+/**** Defines for the Slot field ****/
+#define MPI3_SLOT_INVALID                           (0xFFFF)
+
+/**** Defines for the SlotIndex field ****/
+#define MPI3_SLOT_INDEX_INVALID                     (0xFFFF)
+
+/*****************************************************************************
+ *              Manufacturing Configuration Pages                            *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              Manufacturing Page 0                                         *
+ ****************************************************************************/
+typedef struct _MPI3_MAN_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U8                              ChipRevision[8];        /* 0x08 */
+    U8                              ChipName[32];           /* 0x10 */
+    U8                              BoardName[32];          /* 0x30 */
+    U8                              BoardAssembly[32];      /* 0x50 */
+    U8                              BoardTracerNumber[32];  /* 0x70 */
+    U32                             BoardPower;             /* 0x90 */
+    U32                             Reserved94;             /* 0x94 */
+    U32                             Reserved98;             /* 0x98 */
+    U8                              OEM;                    /* 0x9C */
+    U8                              SubOEM;                 /* 0x9D */
+    U16                             Reserved9E;             /* 0x9E */
+    U8                              BoardMfgDay;            /* 0xA0 */
+    U8                              BoardMfgMonth;          /* 0xA1 */
+    U16                             BoardMfgYear;           /* 0xA2 */
+    U8                              BoardReworkDay;         /* 0xA4 */
+    U8                              BoardReworkMonth;       /* 0xA5 */
+    U16                             BoardReworkYear;        /* 0xA6 */
+    U64                             BoardRevision;          /* 0xA8 */
+    U8                              EPackFRU[16];           /* 0xB0 */
+    U8                              ProductName[256];       /* 0xC0 */
+} MPI3_MAN_PAGE0, MPI3_POINTER PTR_MPI3_MAN_PAGE0,
+  Mpi3ManPage0_t, MPI3_POINTER pMpi3ManPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN0_PAGEVERSION       (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 1                                         *
+ ****************************************************************************/
+
+#define MPI3_MAN1_VPD_SIZE                                   (512)
+
+typedef struct _MPI3_MAN_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                  /* 0x00 */
+    U32                             Reserved08[2];           /* 0x08 */
+    U8                              VPD[MPI3_MAN1_VPD_SIZE]; /* 0x10 */
+} MPI3_MAN_PAGE1, MPI3_POINTER PTR_MPI3_MAN_PAGE1,
+  Mpi3ManPage1_t, MPI3_POINTER pMpi3ManPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN1_PAGEVERSION                                 (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 5                                         *
+ ****************************************************************************/
+typedef struct _MPI3_MAN5_PHY_ENTRY {
+    U64     IOC_WWID;                                       /* 0x00 */
+    U64     DeviceName;                                     /* 0x08 */
+    U64     SATA_WWID;                                      /* 0x10 */
+} MPI3_MAN5_PHY_ENTRY, MPI3_POINTER PTR_MPI3_MAN5_PHY_ENTRY,
+  Mpi3Man5PhyEntry_t, MPI3_POINTER pMpi3Man5PhyEntry_t;
+
+#ifndef MPI3_MAN5_PHY_MAX
+#define MPI3_MAN5_PHY_MAX                                   (1)
+#endif  /* MPI3_MAN5_PHY_MAX */
+
+typedef struct _MPI3_MAN_PAGE5 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U8                              NumPhys;                /* 0x08 */
+    U8                              Reserved09[3];          /* 0x09 */
+    U32                             Reserved0C;             /* 0x0C */
+    MPI3_MAN5_PHY_ENTRY             Phy[MPI3_MAN5_PHY_MAX]; /* 0x10 */
+} MPI3_MAN_PAGE5, MPI3_POINTER PTR_MPI3_MAN_PAGE5,
+  Mpi3ManPage5_t, MPI3_POINTER pMpi3ManPage5_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN5_PAGEVERSION                                (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 6                                         *
+ ****************************************************************************/
+typedef struct _MPI3_MAN6_GPIO_ENTRY {
+    U8      FunctionCode;                                                     /* 0x00 */
+    U8      Reserved01;                                                       /* 0x01 */
+    U16     Flags;                                                            /* 0x02 */
+    U8      Param1;                                                           /* 0x04 */
+    U8      Param2;                                                           /* 0x05 */
+    U16     Reserved06;                                                       /* 0x06 */
+    U32     Param3;                                                           /* 0x08 */
+} MPI3_MAN6_GPIO_ENTRY, MPI3_POINTER PTR_MPI3_MAN6_GPIO_ENTRY,
+  Mpi3Man6GpioEntry_t, MPI3_POINTER pMpi3Man6GpioEntry_t;
+
+/**** Defines for the FunctionCode field ****/
+#define MPI3_MAN6_GPIO_FUNCTION_GENERIC                                       (0x00)
+#define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE                                     (0x01)
+#define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT                                 (0x02)
+#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY                               (0x03)
+#define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE                              (0x04)
+#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN                             (0x05)
+#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW                            (0x06)
+#define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT                              (0x07)
+#define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE                             (0x08)
+#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_MUX_RESET                               (0x09)
+#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET                                   (0x0A)
+#define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET                            (0x0B)
+#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT                                  (0x0C)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ATTN                                    (0x0D)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE                                  (0x0E)
+#define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT                                   (0x0F)
+#define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE                                     (0x10)
+#define MPI3_MAN6_GPIO_FUNCTION_LICENSE                                       (0x11)
+#define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL                                (0x12)
+
+/**** Defines for Param1 (Flags) when FunctionCode is EXT_INTERRUPT ****/
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK                        (0xF0)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC                     (0x00)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT                  (0x10)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT    (0x20)
+
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK                       (0x01)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE                       (0x00)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL                      (0x01)
+
+/**** Defines for Param1 (PHY STATE) when FunctionCode is PORT_STATUS_GREEN ****/
+#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP                    (0x00)
+#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP            (0x01)
+
+/**** Defines for Param1 (INTERFACE_SIGNAL) when FunctionCode is CABLE_MANAGEMENT ****/
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT             (0x00)
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE        (0x01)
+#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE          (0x02)
+
+/**** Defines for Param2 (ISTWI RESET) when FunctionCode is ISTWI_MUX_RESET ****/
+#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_SPEC_MUX                        (0x00)
+#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_ALL_MUXES                       (0x01)
+
+/**** Defines for Param1 (LECENSE_TYPE) when FunctionCode is LICENSE ****/
+#define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON                            (0x00)
+
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK                                   (0x0100)
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE                              (0x0100)
+#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE                              (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK                              (0x00C0)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM                            (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM                             (0x0040)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM                             (0x0080)
+#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM                             (0x00C0)
+#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK                                (0x0030)
+#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT                               (4)
+#define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH                                      (0x0008)
+#define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED                                   (0x0004)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK                                   (0x0003)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT                                  (0x0000)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT                      (0x0001)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT                     (0x0002)
+#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT                       (0x0003)
+
+#ifndef MPI3_MAN6_GPIO_MAX
+#define MPI3_MAN6_GPIO_MAX                                                    (1)
+#endif  /* MPI3_MAN6_GPIO_MAX */
+
+typedef struct _MPI3_MAN_PAGE6 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                   /* 0x00 */
+    U16                             Flags;                                    /* 0x08 */
+    U16                             Reserved0A;                               /* 0x0A */
+    U8                              NumGPIO;                                  /* 0x0C */
+    U8                              Reserved0D[3];                            /* 0x0D */
+    MPI3_MAN6_GPIO_ENTRY            GPIO[MPI3_MAN6_GPIO_MAX];                 /* 0x10 */
+} MPI3_MAN_PAGE6, MPI3_POINTER PTR_MPI3_MAN_PAGE6,
+  Mpi3ManPage6_t, MPI3_POINTER pMpi3ManPage6_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN6_PAGEVERSION                                                 (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED                                (0x0001)
+
+/*****************************************************************************
+ *              Manufacturing Page 7                                         *
+ ****************************************************************************/
+typedef struct _MPI3_MAN7_RECEPTACLE_INFO {
+    U32                             Name[4];                    /* 0x00 */
+    U8                              Location;                   /* 0x10 */
+    U8                              ConnectorType;              /* 0x11 */
+    U8                              PEDClk;                     /* 0x12 */
+    U8                              ConnectorID;                /* 0x13 */
+    U32                             Reserved14;                 /* 0x14 */
+} MPI3_MAN7_RECEPTACLE_INFO, MPI3_POINTER PTR_MPI3_MAN7_RECEPTACLE_INFO,
+ Mpi3Man7ReceptacleInfo_t, MPI3_POINTER pMpi3Man7ReceptacleInfo_t;
+
+/**** Defines for Location field ****/
+#define MPI3_MAN7_LOCATION_UNKNOWN                         (0x00)
+#define MPI3_MAN7_LOCATION_INTERNAL                        (0x01)
+#define MPI3_MAN7_LOCATION_EXTERNAL                        (0x02)
+#define MPI3_MAN7_LOCATION_VIRTUAL                         (0x03)
+
+/**** Defines for ConnectorType - Use definitions from SES-4 ****/
+
+/**** Defines for PEDClk field ****/
+#define MPI3_MAN7_PEDCLK_ROUTING_MASK                      (0x10)
+#define MPI3_MAN7_PEDCLK_ROUTING_DIRECT                    (0x00)
+#define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER              (0x10)
+#define MPI3_MAN7_PEDCLK_ID_MASK                           (0x0F)
+
+#ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX
+#define MPI3_MAN7_RECEPTACLE_INFO_MAX                      (1)
+#endif  /* MPI3_MAN7_RECEPTACLE_INFO_MAX */
+
+typedef struct _MPI3_MAN_PAGE7 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                           /* 0x00 */
+    U32                             Flags;                                            /* 0x08 */
+    U8                              NumReceptacles;                                   /* 0x0C */
+    U8                              Reserved0D[3];                                    /* 0x0D */
+    U32                             EnclosureName[4];                                 /* 0x10 */
+    MPI3_MAN7_RECEPTACLE_INFO       ReceptacleInfo[MPI3_MAN7_RECEPTACLE_INFO_MAX];    /* 0x20 */   /* variable length array */
+} MPI3_MAN_PAGE7, MPI3_POINTER PTR_MPI3_MAN_PAGE7,
+  Mpi3ManPage7_t, MPI3_POINTER pMpi3ManPage7_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN7_PAGEVERSION                              (0x00)
+
+/**** Defines for Flags field ****/
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK          (0x01)
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0             (0x00)
+#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1             (0x01)
+
+
+/*****************************************************************************
+ *              Manufacturing Page 8                                         *
+ ****************************************************************************/
+
+typedef struct _MPI3_MAN8_PHY_INFO {
+    U8                              ReceptacleID;               /* 0x00 */
+    U8                              ConnectorLane;              /* 0x01 */
+    U16                             Reserved02;                 /* 0x02 */
+    U16                             Slotx1;                     /* 0x04 */
+    U16                             Slotx2;                     /* 0x06 */
+    U16                             Slotx4;                     /* 0x08 */
+    U16                             Reserved0A;                 /* 0x0A */
+    U32                             Reserved0C;                 /* 0x0C */
+} MPI3_MAN8_PHY_INFO, MPI3_POINTER PTR_MPI3_MAN8_PHY_INFO,
+  Mpi3Man8PhyInfo_t, MPI3_POINTER pMpi3Man8PhyInfo_t;
+
+#ifndef MPI3_MAN8_PHY_INFO_MAX
+#define MPI3_MAN8_PHY_INFO_MAX                      (1)
+#endif  /* MPI3_MAN8_PHY_INFO_MAX */
+
+typedef struct _MPI3_MAN_PAGE8 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                            /* 0x00 */
+    U32                             Reserved08;                        /* 0x08 */
+    U8                              NumPhys;                           /* 0x0C */
+    U8                              Reserved0D[3];                     /* 0x0D */
+    MPI3_MAN8_PHY_INFO              PhyInfo[MPI3_MAN8_PHY_INFO_MAX];   /* 0x10 */  /* variable length array */
+} MPI3_MAN_PAGE8, MPI3_POINTER PTR_MPI3_MAN_PAGE8,
+  Mpi3ManPage8_t, MPI3_POINTER pMpi3ManPage8_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN8_PAGEVERSION                   (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 9                                         *
+ ****************************************************************************/
+typedef struct _MPI3_MAN9_RSRC_ENTRY {
+    U32     Maximum;        /* 0x00 */
+    U32     Decrement;      /* 0x04 */
+    U32     Minimum;        /* 0x08 */
+    U32     Actual;         /* 0x0C */
+} MPI3_MAN9_RSRC_ENTRY, MPI3_POINTER PTR_MPI3_MAN9_RSRC_ENTRY,
+  Mpi3Man9RsrcEntry_t, MPI3_POINTER pMpi3Man9RsrcEntry_t;
+
+typedef enum _MPI3_MAN9_RESOURCES {
+    MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0,
+    MPI3_MAN9_RSRC_TARGET_CMDS      = 1,
+    MPI3_MAN9_RSRC_SAS_TARGETS      = 2,
+    MPI3_MAN9_RSRC_PCIE_TARGETS     = 3,
+    MPI3_MAN9_RSRC_INITIATORS       = 4,
+    MPI3_MAN9_RSRC_VDS              = 5,
+    MPI3_MAN9_RSRC_ENCLOSURES       = 6,
+    MPI3_MAN9_RSRC_ENCLOSURE_PHYS   = 7,
+    MPI3_MAN9_RSRC_EXPANDERS        = 8,
+    MPI3_MAN9_RSRC_PCIE_SWITCHES    = 9,
+    MPI3_MAN9_RSRC_PDS              = 10,
+    MPI3_MAN9_RSRC_HOST_PDS         = 11,
+    MPI3_MAN9_RSRC_ADV_HOST_PDS     = 12,
+    MPI3_MAN9_RSRC_RAID_PDS         = 13,
+    MPI3_MAN9_RSRC_NUM_RESOURCES
+} MPI3_MAN9_RESOURCES;
+
+#define MPI3_MAN9_MIN_OUTSTANDING_REQS      (1)
+#define MPI3_MAN9_MAX_OUTSTANDING_REQS      (65000)
+
+#define MPI3_MAN9_MIN_TARGET_CMDS           (0)
+#define MPI3_MAN9_MAX_TARGET_CMDS           (65535)
+
+#define MPI3_MAN9_MIN_SAS_TARGETS           (0)
+#define MPI3_MAN9_MAX_SAS_TARGETS           (65535)
+
+#define MPI3_MAN9_MIN_PCIE_TARGETS          (0)
+/* Max PCIe Targets is product specific */
+
+#define MPI3_MAN9_MIN_INITIATORS            (0)
+#define MPI3_MAN9_MAX_INITIATORS            (65535)
+
+#define MPI3_MAN9_MIN_ENCLOSURES            (0)
+#define MPI3_MAN9_MAX_ENCLOSURES            (65535)
+
+#define MPI3_MAN9_MIN_ENCLOSURE_PHYS        (0)
+/*
+ * Max Enclosure Phys depends on the largest enclosure
+ * i.e. the enclosure with the largest number of phys.
+ */
+
+#define MPI3_MAN9_MIN_EXPANDERS             (0)
+#define MPI3_MAN9_MAX_EXPANDERS             (65535)
+
+#define MPI3_MAN9_MIN_PCIE_SWITCHES         (0)
+/* Max PCIe Switches is product specific */
+
+typedef struct _MPI3_MAN_PAGE9 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U8                              NumResources;                           /* 0x08 */
+    U8                              Reserved09;                             /* 0x09 */
+    U16                             Reserved0A;                             /* 0x0A */
+    U32                             Reserved0C;                             /* 0x0C */
+    U32                             Reserved10;                             /* 0x10 */
+    U32                             Reserved14;                             /* 0x14 */
+    U32                             Reserved18;                             /* 0x18 */
+    U32                             Reserved1C;                             /* 0x1C */
+    MPI3_MAN9_RSRC_ENTRY            Resource[MPI3_MAN9_RSRC_NUM_RESOURCES]; /* 0x20 */
+} MPI3_MAN_PAGE9, MPI3_POINTER PTR_MPI3_MAN_PAGE9,
+  Mpi3ManPage9_t, MPI3_POINTER pMpi3ManPage9_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN9_PAGEVERSION                   (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 10                                        *
+ ****************************************************************************/
+typedef struct _MPI3_MAN10_ISTWI_CTRLR_ENTRY {
+    U16     SlaveAddress;       /* 0x00 */
+    U16     Flags;              /* 0x02 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN10_ISTWI_CTRLR_ENTRY, MPI3_POINTER PTR_MPI3_MAN10_ISTWI_CTRLR_ENTRY,
+  Mpi3Man10IstwiCtrlrEntry_t, MPI3_POINTER pMpi3Man10IstwiCtrlrEntry_t;
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED          (0x0002)
+#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED         (0x0001)
+
+#ifndef MPI3_MAN10_ISTWI_CTRLR_MAX
+#define MPI3_MAN10_ISTWI_CTRLR_MAX          (1)
+#endif  /* MPI3_MAN10_ISTWI_CTRLR_MAX */
+
+typedef struct _MPI3_MAN_PAGE10 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                         /* 0x00 */
+    U32                             Reserved08;                                     /* 0x08 */
+    U8                              NumISTWICtrl;                                   /* 0x0C */
+    U8                              Reserved0D[3];                                  /* 0x0D */
+    MPI3_MAN10_ISTWI_CTRLR_ENTRY    ISTWIController[MPI3_MAN10_ISTWI_CTRLR_MAX];    /* 0x10 */
+} MPI3_MAN_PAGE10, MPI3_POINTER PTR_MPI3_MAN_PAGE10,
+  Mpi3ManPage10_t, MPI3_POINTER pMpi3ManPage10_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN10_PAGEVERSION                  (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 11                                        *
+ ****************************************************************************/
+typedef struct _MPI3_MAN11_MUX_DEVICE_FORMAT {
+    U8      MaxChannel;         /* 0x00 */
+    U8      Reserved01[3];      /* 0x01 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN11_MUX_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_MUX_DEVICE_FORMAT,
+  Mpi3Man11MuxDeviceFormat_t, MPI3_POINTER pMpi3Man11MuxDeviceFormat_t;
+
+typedef struct _MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT {
+    U8      Type;               /* 0x00 */
+    U8      Reserved01[3];      /* 0x01 */
+    U8      TempChannel[4];     /* 0x04 */
+} MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT,
+  Mpi3Man11TempSensorDeviceFormat_t, MPI3_POINTER pMpi3Man11TempSensorDeviceFormat_t;
+
+/**** Defines for the Type field ****/
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654         (0x00)
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442         (0x01)
+#define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476         (0x02)
+
+/**** Define for the TempChannel field ****/
+#define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED      (0x01)
+
+typedef struct _MPI3_MAN11_SEEPROM_DEVICE_FORMAT {
+    U8      Size;               /* 0x00 */
+    U8      PageWriteSize;      /* 0x01 */
+    U16     Reserved02;         /* 0x02 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN11_SEEPROM_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_SEEPROM_DEVICE_FORMAT,
+  Mpi3Man11SeepromDeviceFormat_t, MPI3_POINTER pMpi3Man11SeepromDeviceFormat_t;
+
+/**** Defines for the Size field ****/
+#define MPI3_MAN11_SEEPROM_SIZE_1KBITS              (0x01)
+#define MPI3_MAN11_SEEPROM_SIZE_2KBITS              (0x02)
+#define MPI3_MAN11_SEEPROM_SIZE_4KBITS              (0x03)
+#define MPI3_MAN11_SEEPROM_SIZE_8KBITS              (0x04)
+#define MPI3_MAN11_SEEPROM_SIZE_16KBITS             (0x05)
+#define MPI3_MAN11_SEEPROM_SIZE_32KBITS             (0x06)
+#define MPI3_MAN11_SEEPROM_SIZE_64KBITS             (0x07)
+#define MPI3_MAN11_SEEPROM_SIZE_128KBITS            (0x08)
+
+typedef struct _MPI3_MAN11_DDR_SPD_DEVICE_FORMAT {
+    U8      Channel;            /* 0x00 */
+    U8      Reserved01[3];      /* 0x01 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN11_DDR_SPD_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DDR_SPD_DEVICE_FORMAT,
+  Mpi3Man11DdrSpdDeviceFormat_t, MPI3_POINTER pMpi3Man11DdrSpdDeviceFormat_t;
+
+typedef struct _MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT {
+    U8      Type;               /* 0x00 */
+    U8      ReceptacleID;       /* 0x01 */
+    U16     Reserved02;         /* 0x02 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT,
+  Mpi3Man11CableMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11CableMgmtDeviceFormat_t;
+
+/**** Defines for the Type field ****/
+#define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636           (0x00)
+
+typedef struct _MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT {
+    U16     Flags;              /* 0x00 */
+    U16     Reserved02;         /* 0x02 */
+} MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT,
+  Mpi3Man11BkplaneSpecUBMFormat, MPI3_POINTER pMpi3Man11BkplaneSpecUBMFormat;
+
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED  (0x0200)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING                 (0x0100)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK                  (0x00F0)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT                 (4)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK            (0x000F)
+#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT           (0)
+
+typedef struct _MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT {
+    U16     Flags;              /* 0x00 */
+    U16     Reserved02;         /* 0x02 */
+} MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT,
+  Mpi3Man11BkplaneSpecVPPFormat, MPI3_POINTER pMpi3Man11BkplaneSpecVPPFormat;
+
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED  (0x0040)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_MASK          (0x0030)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_GPIO          (0x0000)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_REG           (0x0010)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_MASK            (0x000F)
+#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_SHIFT           (0)
+
+
+typedef union _MPI3_MAN11_BKPLANE_SPEC_FORMAT {
+    MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT     Ubm;
+    MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT     Vpp;
+} MPI3_MAN11_BKPLANE_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_FORMAT,
+  Mpi3Man11BkplaneSpecFormat, MPI3_POINTER pMpi3Man11BkplaneSpecFormat;
+
+typedef struct _MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT {
+    U8                                     Type;                   /* 0x00 */
+    U8                                     ReceptacleID;           /* 0x01 */
+    U16                                    Reserved02;             /* 0x02 */
+    MPI3_MAN11_BKPLANE_SPEC_FORMAT         BackplaneMgmtSpecific;  /* 0x04 */
+} MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT,
+  Mpi3Man11BkplaneMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11BkplaneMgmtDeviceFormat_t;
+
+/**** Defines for the Type field ****/
+#define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM            (0x00)
+#define MPI3_MAN11_BKPLANE_MGMT_TYPE_VPP            (0x01)
+
+typedef struct _MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT {
+    U8      Type;               /* 0x00 */
+    U8      Reserved01[3];      /* 0x01 */
+    U32     Reserved04;         /* 0x04 */
+} MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT,
+  Mpi3Man11GasGaugeDeviceFormat_t, MPI3_POINTER pMpi3Man11GasGaugeDeviceFormat_t;
+
+/**** Defines for the Type field ****/
+#define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD          (0x00)
+
+typedef union _MPI3_MAN11_DEVICE_SPECIFIC_FORMAT {
+    MPI3_MAN11_MUX_DEVICE_FORMAT            Mux;
+    MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT    TempSensor;
+    MPI3_MAN11_SEEPROM_DEVICE_FORMAT        Seeprom;
+    MPI3_MAN11_DDR_SPD_DEVICE_FORMAT        DdrSpd;
+    MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT     CableMgmt;
+    MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT   BkplaneMgmt;
+    MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT      GasGauge;
+    U32                                     Words[2];
+} MPI3_MAN11_DEVICE_SPECIFIC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DEVICE_SPECIFIC_FORMAT,
+  Mpi3Man11DeviceSpecificFormat_t, MPI3_POINTER pMpi3Man11DeviceSpecificFormat_t;
+
+typedef struct _MPI3_MAN11_ISTWI_DEVICE_FORMAT {
+    U8                                  DeviceType;         /* 0x00 */
+    U8                                  Controller;         /* 0x01 */
+    U8                                  Reserved02;         /* 0x02 */
+    U8                                  Flags;              /* 0x03 */
+    U16                                 DeviceAddress;      /* 0x04 */
+    U8                                  MuxChannel;         /* 0x06 */
+    U8                                  MuxIndex;           /* 0x07 */
+    MPI3_MAN11_DEVICE_SPECIFIC_FORMAT   DeviceSpecific;     /* 0x08 */
+} MPI3_MAN11_ISTWI_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_ISTWI_DEVICE_FORMAT,
+  Mpi3Man11IstwiDeviceFormat_t, MPI3_POINTER pMpi3Man11IstwiDeviceFormat_t;
+
+/**** Defines for the DeviceType field ****/
+#define MPI3_MAN11_ISTWI_DEVTYPE_MUX                  (0x00)
+#define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR          (0x01)
+#define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM              (0x02)
+#define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD              (0x03)
+#define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT           (0x04)
+#define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT       (0x05)
+#define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE            (0x06)
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT            (0x01)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_MASK         (0x06)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_100KHZ       (0x00)
+#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_400KHZ       (0x02)
+
+#ifndef MPI3_MAN11_ISTWI_DEVICE_MAX
+#define MPI3_MAN11_ISTWI_DEVICE_MAX             (1)
+#endif  /* MPI3_MAN11_ISTWI_DEVICE_MAX */
+
+typedef struct _MPI3_MAN_PAGE11 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                     /* 0x00 */
+    U32                             Reserved08;                                 /* 0x08 */
+    U8                              NumISTWIDev;                                /* 0x0C */
+    U8                              Reserved0D[3];                              /* 0x0D */
+    MPI3_MAN11_ISTWI_DEVICE_FORMAT  ISTWIDevice[MPI3_MAN11_ISTWI_DEVICE_MAX];   /* 0x10 */
+} MPI3_MAN_PAGE11, MPI3_POINTER PTR_MPI3_MAN_PAGE11,
+  Mpi3ManPage11_t, MPI3_POINTER pMpi3ManPage11_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN11_PAGEVERSION                  (0x00)
+
+
+/*****************************************************************************
+ *              Manufacturing Page 12                                        *
+ ****************************************************************************/
+#ifndef MPI3_MAN12_NUM_SGPIO_MAX
+#define MPI3_MAN12_NUM_SGPIO_MAX                                     (1)
+#endif  /* MPI3_MAN12_NUM_SGPIO_MAX */
+
+typedef struct _MPI3_MAN12_SGPIO_INFO {
+    U8                              SlotCount;                                  /* 0x00 */
+    U8                              Reserved01[3];                              /* 0x01 */
+    U32                             Reserved04;                                 /* 0x04 */
+    U8                              PhyOrder[32];                               /* 0x08 */
+} MPI3_MAN12_SGPIO_INFO, MPI3_POINTER PTR_MPI3_MAN12_SGPIO_INFO,
+  Mpi3Man12SGPIOInfo, MPI3_POINTER pMpi3Man12SGPIOInfo;
+
+typedef struct _MPI3_MAN_PAGE12 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                     /* 0x00 */
+    U32                             Flags;                                      /* 0x08 */
+    U32                             SClockFreq;                                 /* 0x0C */
+    U32                             ActivityModulation;                         /* 0x10 */
+    U8                              NumSGPIO;                                   /* 0x14 */
+    U8                              Reserved15[3];                              /* 0x15 */
+    U32                             Reserved18;                                 /* 0x18 */
+    U32                             Reserved1C;                                 /* 0x1C */
+    U32                             Pattern[8];                                 /* 0x20 */
+    MPI3_MAN12_SGPIO_INFO           SGPIOInfo[MPI3_MAN12_NUM_SGPIO_MAX];        /* 0x40 */   /* variable length */
+} MPI3_MAN_PAGE12, MPI3_POINTER PTR_MPI3_MAN_PAGE12,
+  Mpi3ManPage12_t, MPI3_POINTER pMpi3ManPage12_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN12_PAGEVERSION                                       (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED                      (0x0400)
+#define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED                     (0x0200)
+#define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED                           (0x0100)
+#define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED                      (0x0004)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK                      (0x0002)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL                 (0x0000)
+#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN                (0x0002)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK                          (0x0001)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL                     (0x0000)
+#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN                    (0x0001)
+
+/**** Defines for the SioClkFreq field ****/
+#define MPI3_MAN12_SIO_CLK_FREQ_MIN                                  (32)        /* 32 Hz min SIO Clk Freq */
+#define MPI3_MAN12_SIO_CLK_FREQ_MAX                                  (100000)    /* 100 KHz max SIO Clk Freq */
+
+/**** Defines for the ActivityModulation field ****/
+#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK                (0x0000F000)
+#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT               (12)
+#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK                   (0x00000F00)
+#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT                  (8)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK              (0x000000F0)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT             (4)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK               (0x0000000F)
+#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT              (0)
+
+/*** Defines for the Pattern field ****/
+#define MPI3_MAN12_PATTERN_RATE_MASK                                 (0xE0000000)
+#define MPI3_MAN12_PATTERN_RATE_2_HZ                                 (0x00000000)
+#define MPI3_MAN12_PATTERN_RATE_4_HZ                                 (0x20000000)
+#define MPI3_MAN12_PATTERN_RATE_8_HZ                                 (0x40000000)
+#define MPI3_MAN12_PATTERN_RATE_16_HZ                                (0x60000000)
+#define MPI3_MAN12_PATTERN_RATE_10_HZ                                (0x80000000)
+#define MPI3_MAN12_PATTERN_RATE_20_HZ                                (0xA0000000)
+#define MPI3_MAN12_PATTERN_RATE_40_HZ                                (0xC0000000)
+#define MPI3_MAN12_PATTERN_LENGTH_MASK                               (0x1F000000)
+#define MPI3_MAN12_PATTERN_LENGTH_SHIFT                              (24)
+#define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK                          (0x00FFFFFF)
+#define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT                         (0)
+
+
+/*****************************************************************************
+ *              Manufacturing Page 13                                        *
+ ****************************************************************************/
+
+#ifndef MPI3_MAN13_NUM_TRANSLATION_MAX
+#define MPI3_MAN13_NUM_TRANSLATION_MAX                               (1)
+#endif  /* MPI3_MAN13_NUM_TRANSLATION_MAX */
+
+typedef struct _MPI3_MAN13_TRANSLATION_INFO {
+    U32                             SlotStatus;                                        /* 0x00 */
+    U32                             Mask;                                              /* 0x04 */
+    U8                              Activity;                                          /* 0x08 */
+    U8                              Locate;                                            /* 0x09 */
+    U8                              Error;                                             /* 0x0A */
+    U8                              Reserved0B;                                        /* 0x0B */
+} MPI3_MAN13_TRANSLATION_INFO, MPI3_POINTER PTR_MPI3_MAN13_TRANSLATION_INFO,
+  Mpi3Man13TranslationInfo, MPI3_POINTER pMpi3Man13TranslationInfo;
+
+/**** Defines for the SlotStatus field ****/
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT                     (0x20000000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF                (0x10000000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY           (0x00800000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE             (0x00400000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING            (0x00100000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT                    (0x00080000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL                   (0x00040000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY                  (0x00020000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK                        (0x00008000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE           (0x00004000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE                 (0x00002000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK         (0x00001000)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY         (0x00000800)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY           (0x00000400)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP             (0x00000200)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT       (0x00000100)
+#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE         (0x00000040)
+
+/**** Defines for the Mask field - use MPI3_MAN13_TRANSLATION_SLOTSTATUS_ defines ****/
+
+/**** Defines for the Activity, Locate, and Error fields ****/
+#define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF                          (0x00)
+#define MPI3_MAN13_BLINK_PATTERN_FORCE_ON                           (0x01)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_0                          (0x02)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_1                          (0x03)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_2                          (0x04)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_3                          (0x05)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_4                          (0x06)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_5                          (0x07)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_6                          (0x08)
+#define MPI3_MAN13_BLINK_PATTERN_PATTERN_7                          (0x09)
+#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY                           (0x0A)
+#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL                     (0x0B)
+
+typedef struct _MPI3_MAN_PAGE13 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U8                              NumTrans;                                          /* 0x08 */
+    U8                              Reserved09[3];                                     /* 0x09 */
+    U32                             Reserved0C;                                        /* 0x0C */
+    MPI3_MAN13_TRANSLATION_INFO     Translation[MPI3_MAN13_NUM_TRANSLATION_MAX];       /* 0x10 */  /* variable length */
+} MPI3_MAN_PAGE13, MPI3_POINTER PTR_MPI3_MAN_PAGE13,
+  Mpi3ManPage13_t, MPI3_POINTER pMpi3ManPage13_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN13_PAGEVERSION                                       (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 14                                        *
+ ****************************************************************************/
+
+typedef struct _MPI3_MAN_PAGE14 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U16                             Flags;                                             /* 0x08 */
+    U16                             Reserved0A;                                        /* 0x0A */
+    U8                              NumSlotGroups;                                     /* 0x0C */
+    U8                              NumSlots;                                          /* 0x0D */
+    U16                             MaxCertChainLength;                                /* 0x0E */
+    U32                             SealedSlots;                                       /* 0x10 */
+} MPI3_MAN_PAGE14, MPI3_POINTER PTR_MPI3_MAN_PAGE14,
+  Mpi3ManPage14_t, MPI3_POINTER pMpi3ManPage14_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN14_PAGEVERSION                                       (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN14_FLAGS_AUTH_SESSION_REQ                            (0x01)
+#define MPI3_MAN14_FLAGS_AUTH_API_MASK                               (0x0E)
+#define MPI3_MAN14_FLAGS_AUTH_API_NONE                               (0x00)
+#define MPI3_MAN14_FLAGS_AUTH_API_CEREBUS                            (0x02)
+#define MPI3_MAN14_FLAGS_AUTH_API_DMTF_PMCI                          (0x04)
+
+/*****************************************************************************
+ *              Manufacturing Page 15                                        *
+ ****************************************************************************/
+
+#ifndef MPI3_MAN15_VERSION_RECORD_MAX
+#define MPI3_MAN15_VERSION_RECORD_MAX      1
+#endif  /* MPI3_MAN15_VERSION_RECORD_MAX */
+
+typedef struct _MPI3_MAN15_VERSION_RECORD {
+    U16                             SPDMVersion;                                       /* 0x00 */
+    U16                             Reserved02;                                        /* 0x02 */
+} MPI3_MAN15_VERSION_RECORD, MPI3_POINTER PTR_MPI3_MAN15_VERSION_RECORD,
+  Mpi3Man15VersionRecord_t, MPI3_POINTER pMpi3Man15VersionRecord_t;
+
+typedef struct _MPI3_MAN_PAGE15 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U8                              NumVersionRecords;                                 /* 0x08 */
+    U8                              Reserved09[3];                                     /* 0x09 */
+    U32                             Reserved0C;                                        /* 0x0C */
+    MPI3_MAN15_VERSION_RECORD       VersionRecord[MPI3_MAN15_VERSION_RECORD_MAX];      /* 0x10 */
+} MPI3_MAN_PAGE15, MPI3_POINTER PTR_MPI3_MAN_PAGE15,
+  Mpi3ManPage15_t, MPI3_POINTER pMpi3ManPage15_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN15_PAGEVERSION                                       (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 16                                        *
+ ****************************************************************************/
+
+#ifndef MPI3_MAN16_CERT_ALGO_MAX
+#define MPI3_MAN16_CERT_ALGO_MAX      1
+#endif  /* MPI3_MAN16_CERT_ALGO_MAX */
+
+typedef struct _MPI3_MAN16_CERTIFICATE_ALGORITHM {
+    U8                                   SlotGroup;                                    /* 0x00 */
+    U8                                   Reserved01[3];                                /* 0x01 */
+    U32                                  BaseAsymAlgo;                                 /* 0x04 */
+    U32                                  BaseHashAlgo;                                 /* 0x08 */
+    U32                                  Reserved0C[3];                                /* 0x0C */
+} MPI3_MAN16_CERTIFICATE_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN16_CERTIFICATE_ALGORITHM,
+  Mpi3Man16CertificateAlgorithm_t, MPI3_POINTER pMpi3Man16CertificateAlgorithm_t;
+
+typedef struct _MPI3_MAN_PAGE16 {
+    MPI3_CONFIG_PAGE_HEADER              Header;                                         /* 0x00 */
+    U32                                  Reserved08;                                     /* 0x08 */
+    U8                                   NumCertAlgos;                                   /* 0x0C */
+    U8                                   Reserved0D[3];                                  /* 0x0D */
+    MPI3_MAN16_CERTIFICATE_ALGORITHM     CertificateAlgorithm[MPI3_MAN16_CERT_ALGO_MAX]; /* 0x10 */
+} MPI3_MAN_PAGE16, MPI3_POINTER PTR_MPI3_MAN_PAGE16,
+  Mpi3ManPage16_t, MPI3_POINTER pMpi3ManPage16_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN16_PAGEVERSION                                       (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 17                                        *
+ ****************************************************************************/
+
+#ifndef MPI3_MAN17_HASH_ALGORITHM_MAX
+#define MPI3_MAN17_HASH_ALGORITHM_MAX      1
+#endif  /* MPI3_MAN17_HASH_ALGORITHM_MAX */
+
+typedef struct _MPI3_MAN17_HASH_ALGORITHM {
+    U8                              MeasSpecification;                                 /* 0x00 */
+    U8                              Reserved01[3];                                     /* 0x01 */
+    U32                             MeasurementHashAlgo;                               /* 0x04 */
+    U32                             Reserved08[2];                                     /* 0x08 */
+} MPI3_MAN17_HASH_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN17_HASH_ALGORITHM,
+  Mpi3Man17HashAlgorithm_t, MPI3_POINTER pMpi3Man17HashAlgorithm_t;
+
+typedef struct _MPI3_MAN_PAGE17 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U32                             Reserved08;                                        /* 0x08 */
+    U8                              NumHashAlgos;                                      /* 0x0C */
+    U8                              Reserved0D[3];                                     /* 0x0D */
+    MPI3_MAN17_HASH_ALGORITHM       HashAlgorithm[MPI3_MAN17_HASH_ALGORITHM_MAX];      /* 0x10 */
+} MPI3_MAN_PAGE17, MPI3_POINTER PTR_MPI3_MAN_PAGE17,
+  Mpi3ManPage17_t, MPI3_POINTER pMpi3ManPage17_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN17_PAGEVERSION                                       (0x00)
+
+/*****************************************************************************
+ *              Manufacturing Page 20                                        *
+ ****************************************************************************/
+
+typedef struct _MPI3_MAN_PAGE20 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U32                             Reserved08;                                        /* 0x08 */
+    U32                             NonpremiumFeatures;                                /* 0x0C */
+    U8                              AllowedPersonalities;                              /* 0x10 */
+    U8                              Reserved11[3];                                     /* 0x11 */
+} MPI3_MAN_PAGE20, MPI3_POINTER PTR_MPI3_MAN_PAGE20,
+  Mpi3ManPage20_t, MPI3_POINTER pMpi3ManPage20_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN20_PAGEVERSION                                       (0x00)
+
+/**** Defines for the AllowedPersonalities field ****/
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK                           (0x02)
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED                        (0x02)
+#define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED                    (0x00)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK                           (0x01)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED                        (0x01)
+#define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED                    (0x00)
+
+/**** Defines for the NonpremuimFeatures field ****/
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK               (0x01)
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED            (0x00)
+#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED           (0x01)
+
+/*****************************************************************************
+ *              Manufacturing Page 21                                        *
+ ****************************************************************************/
+
+typedef struct _MPI3_MAN_PAGE21 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U32                             Reserved08;                                        /* 0x08 */
+    U32                             Flags;                                             /* 0x0C */
+} MPI3_MAN_PAGE21, MPI3_POINTER PTR_MPI3_MAN_PAGE21,
+  Mpi3ManPage21_t, MPI3_POINTER pMpi3ManPage21_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_MAN21_PAGEVERSION                                       (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_MASK               (0x80)
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_ENABLED            (0x80)
+#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_DISABLED           (0x00)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK                     (0x60)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK                    (0x00)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW                    (0x20)
+#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN                     (0x40)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK              (0x08)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW             (0x00)
+#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT           (0x08)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK                          (0x01)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT                       (0x00)
+#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC                  (0x01)
+
+/*****************************************************************************
+ *              Manufacturing Pages 32-63 (ProductSpecific)                  *
+ ****************************************************************************/
+#ifndef MPI3_MAN_PROD_SPECIFIC_MAX
+#define MPI3_MAN_PROD_SPECIFIC_MAX                      (1)
+#endif  /* MPI3_MAN_PROD_SPECIFIC_MAX */
+
+typedef struct _MPI3_MAN_PAGE_PRODUCT_SPECIFIC {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                            /* 0x00 */
+    U32                             ProductSpecificInfo[MPI3_MAN_PROD_SPECIFIC_MAX];   /* 0x08 */  /* variable length array */
+} MPI3_MAN_PAGE_PRODUCT_SPECIFIC, MPI3_POINTER PTR_MPI3_MAN_PAGE_PRODUCT_SPECIFIC,
+  Mpi3ManPageProductSpecific_t, MPI3_POINTER pMpi3ManPageProductSpecific_t;
+
+/*****************************************************************************
+ *              IO Unit Configuration Pages                                  *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              IO Unit Page 0                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    U64                             UniqueValue;                /* 0x08 */
+    U32                             NvdataVersionDefault;       /* 0x10 */
+    U32                             NvdataVersionPersistent;    /* 0x14 */
+} MPI3_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE0,
+  Mpi3IOUnitPage0_t, MPI3_POINTER pMpi3IOUnitPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT0_PAGEVERSION                (0x00)
+
+/*****************************************************************************
+ *              IO Unit Page 1                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    U32                             Flags;                      /* 0x08 */
+    U8                              DMDIoDelay;                 /* 0x0C */
+    U8                              DMDReportPCIe;              /* 0x0D */
+    U8                              DMDReportSATA;              /* 0x0E */
+    U8                              DMDReportSAS;               /* 0x0F */
+} MPI3_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE1,
+  Mpi3IOUnitPage1_t, MPI3_POINTER pMpi3IOUnitPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT1_PAGEVERSION                (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK                   (0x00000030)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE                 (0x00000000)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE                (0x00000010)
+#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY              (0x00000020)
+#define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK                (0x00000008)
+#define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER                       (0x00000004)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK                   (0x00000003)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE                 (0x00000000)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE                (0x00000001)
+#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED              (0x00000002)
+
+/**** Defines for the DMDReport PCIe/SATA/SAS fields ****/
+#define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK                    (0x7F)
+#define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC                        (0x80)
+
+/*****************************************************************************
+ *              IO Unit Page 2                                               *
+ ****************************************************************************/
+#ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX
+#define MPI3_IO_UNIT2_GPIO_VAL_MAX      (1)
+#endif  /* MPI3_IO_UNIT2_GPIO_VAL_MAX */
+
+typedef struct _MPI3_IO_UNIT_PAGE2 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U8                              GPIOCount;                              /* 0x08 */
+    U8                              Reserved09[3];                          /* 0x09 */
+    U16                             GPIOVal[MPI3_IO_UNIT2_GPIO_VAL_MAX];    /* 0x0C */
+} MPI3_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE2,
+  Mpi3IOUnitPage2_t, MPI3_POINTER pMpi3IOUnitPage2_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT2_PAGEVERSION                (0x00)
+
+/**** Define for the GPIOVal field ****/
+#define MPI3_IOUNIT2_GPIO_FUNCTION_MASK         (0xFFFC)
+#define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT        (2)
+#define MPI3_IOUNIT2_GPIO_SETTING_MASK          (0x0001)
+#define MPI3_IOUNIT2_GPIO_SETTING_OFF           (0x0000)
+#define MPI3_IOUNIT2_GPIO_SETTING_ON            (0x0001)
+
+/*****************************************************************************
+ *              IO Unit Page 3                                               *
+ ****************************************************************************/
+
+typedef struct _MPI3_IO_UNIT3_SENSOR {
+    U16             Flags;                                      /* 0x00 */
+    U16             Reserved02;                                 /* 0x02 */
+    U16             Threshold[4];                               /* 0x04 */
+    U32             Reserved0C;                                 /* 0x0C */
+    U32             Reserved10;                                 /* 0x10 */
+    U32             Reserved14;                                 /* 0x14 */
+} MPI3_IO_UNIT3_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT3_SENSOR,
+  Mpi3IOUnit3Sensor_t, MPI3_POINTER pMpi3IOUnit3Sensor_t;
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T3_ENABLE         (0x0008)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T2_ENABLE         (0x0004)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T1_ENABLE         (0x0002)
+#define MPI3_IOUNIT3_SENSOR_FLAGS_T0_ENABLE         (0x0001)
+
+#ifndef MPI3_IO_UNIT3_SENSOR_MAX
+#define MPI3_IO_UNIT3_SENSOR_MAX        (1)
+#endif  /* MPI3_IO_UNIT3_SENSOR_MAX */
+
+typedef struct _MPI3_IO_UNIT_PAGE3 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                             /* 0x00 */
+    U32                             Reserved08;                         /* 0x08 */
+    U8                              NumSensors;                         /* 0x0C */
+    U8                              PollingInterval;                    /* 0x0D */
+    U16                             Reserved0E;                         /* 0x0E */
+    MPI3_IO_UNIT3_SENSOR            Sensor[MPI3_IO_UNIT3_SENSOR_MAX];   /* 0x10 */
+} MPI3_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE3,
+  Mpi3IOUnitPage3_t, MPI3_POINTER pMpi3IOUnitPage3_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT3_PAGEVERSION                (0x00)
+
+/*****************************************************************************
+ *              IO Unit Page 4                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT4_SENSOR {
+    U16             CurrentTemperature;     /* 0x00 */
+    U16             Reserved02;             /* 0x02 */
+    U8              Flags;                  /* 0x04 */
+    U8              Reserved05[3];          /* 0x05 */
+    U32             Reserved08;             /* 0x08 */
+    U32             Reserved0C;             /* 0x0C */
+} MPI3_IO_UNIT4_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT4_SENSOR,
+  Mpi3IOUnit4Sensor_t, MPI3_POINTER pMpi3IOUnit4Sensor_t;
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID        (0x01)
+
+#ifndef MPI3_IO_UNIT4_SENSOR_MAX
+#define MPI3_IO_UNIT4_SENSOR_MAX        (1)
+#endif  /* MPI3_IO_UNIT4_SENSOR_MAX */
+
+typedef struct _MPI3_IO_UNIT_PAGE4 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                             /* 0x00 */
+    U32                             Reserved08;                         /* 0x08 */
+    U8                              NumSensors;                         /* 0x0C */
+    U8                              Reserved0D[3];                      /* 0x0D */
+    MPI3_IO_UNIT4_SENSOR            Sensor[MPI3_IO_UNIT4_SENSOR_MAX];   /* 0x10 */
+} MPI3_IO_UNIT_PAGE4, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE4,
+  Mpi3IOUnitPage4_t, MPI3_POINTER pMpi3IOUnitPage4_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT4_PAGEVERSION                (0x00)
+
+/*****************************************************************************
+ *              IO Unit Page 5                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT5_SPINUP_GROUP {
+    U8              MaxTargetSpinup;    /* 0x00 */
+    U8              SpinupDelay;        /* 0x01 */
+    U8              SpinupFlags;        /* 0x02 */
+    U8              Reserved03;         /* 0x03 */
+} MPI3_IO_UNIT5_SPINUP_GROUP, MPI3_POINTER PTR_MPI3_IO_UNIT5_SPINUP_GROUP,
+  Mpi3IOUnit5SpinupGroup_t, MPI3_POINTER pMpi3IOUnit5SpinupGroup_t;
+
+/**** Defines for the SpinupFlags field ****/
+#define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE       (0x01)
+
+#ifndef MPI3_IO_UNIT5_PHY_MAX
+#define MPI3_IO_UNIT5_PHY_MAX       (4)
+#endif  /* MPI3_IO_UNIT5_PHY_MAX */
+
+typedef struct _MPI3_IO_UNIT_PAGE5 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    MPI3_IO_UNIT5_SPINUP_GROUP      SpinupGroupParameters[4];   /* 0x08 */
+    U32                             Reserved18;                 /* 0x18 */
+    U32                             Reserved1C;                 /* 0x1C */
+    U32                             Reserved20;                 /* 0x20 */
+    U8                              Reserved24;                 /* 0x24 */
+    U8                              SATADeviceWaitTime;         /* 0x25 */
+    U8                              SpinupEnclDriveCount;       /* 0x26 */
+    U8                              SpinupEnclDelay;            /* 0x27 */
+    U8                              NumPhys;                    /* 0x28 */
+    U8                              PEInitialSpinupDelay;       /* 0x29 */
+    U8                              TopologyStableTime;         /* 0x2A */
+    U8                              Flags;                      /* 0x2B */
+    U8                              Phy[MPI3_IO_UNIT5_PHY_MAX]; /* 0x2C */
+} MPI3_IO_UNIT_PAGE5, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE5,
+  Mpi3IOUnitPage5_t, MPI3_POINTER pMpi3IOUnitPage5_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT5_PAGEVERSION                           (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP            (0x02)
+#define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE                (0x01)
+
+/**** Defines for the PHY field ****/
+#define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK                 (0x03)
+
+/*****************************************************************************
+ *              IO Unit Page 6                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT_PAGE6 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    U32                             BoardPowerRequirement;      /* 0x08 */
+    U32                             PCISlotPowerAllocation;     /* 0x0C */
+    U8                              Flags;                      /* 0x10 */
+    U8                              Reserved11[3];              /* 0x11 */
+} MPI3_IO_UNIT_PAGE6, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE6,
+  Mpi3IOUnitPage6_t, MPI3_POINTER pMpi3IOUnitPage6_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT6_PAGEVERSION                (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC    (0x01)
+
+/*****************************************************************************
+ *              IO Unit Page 7                                               *
+ ****************************************************************************/
+typedef struct _MPI3_IO_UNIT_PAGE7 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    U32                             Reserved08;                 /* 0x08 */
+} MPI3_IO_UNIT_PAGE7, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE7,
+  Mpi3IOUnitPage7_t, MPI3_POINTER pMpi3IOUnitPage7_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT7_PAGEVERSION                (0x00)
+
+/*****************************************************************************
+ *              IO Unit Page 8                                               *
+ ****************************************************************************/
+
+#ifndef MPI3_IOUNIT8_DIGEST_MAX
+#define MPI3_IOUNIT8_DIGEST_MAX                   (1)
+#endif  /* MPI3_IOUNIT8_DIGEST_MAX */
+
+typedef union _MPI3_IOUNIT8_DIGEST {
+    U32                             Dword[16];
+    U16                             Word[32];
+    U8                              Byte[64];
+} MPI3_IOUNIT8_DIGEST, MPI3_POINTER PTR_MPI3_IOUNIT8_DIGEST,
+  Mpi3IOUnit8Digest, MPI3_POINTER pMpi3IOUnit8Digest;
+
+typedef struct _MPI3_IO_UNIT_PAGE8 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                             /* 0x00 */
+    U8                              SBMode;                             /* 0x08 */
+    U8                              SbState;                            /* 0x09 */
+    U16                             Reserved0A;                         /* 0x0A */
+    U8                              NumSlots;                           /* 0x0C */
+    U8                              SlotsAvailable;                     /* 0x0D */
+    U8                              CurrentKeyEncryptionAlgo;           /* 0x0E */
+    U8                              KeyDigestHashAlgo;                  /* 0x0F */
+    U32                             Reserved10[2];                      /* 0x10 */
+    U32                             CurrentKey[128];                    /* 0x18 */
+    MPI3_IOUNIT8_DIGEST             Digest[MPI3_IOUNIT8_DIGEST_MAX];   /* 0x218 */  /* variable length */
+} MPI3_IO_UNIT_PAGE8, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE8,
+  Mpi3IOUnitPage8_t, MPI3_POINTER pMpi3IOUnitPage8_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT8_PAGEVERSION                  (0x00)
+
+/**** Defines for the SBMode field ****/
+#define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG          (0x04)
+#define MPI3_IOUNIT8_SBMODE_HARD_SECURE           (0x02)
+#define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE         (0x01)
+
+/**** Defines for the SBState field ****/
+#define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING   (0x02)
+#define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED  (0x01)
+
+/*****************************************************************************
+ *              IO Unit Page 9                                               *
+ ****************************************************************************/
+
+typedef struct _MPI3_IO_UNIT_PAGE9 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                             /* 0x00 */
+    U32                             Flags;                              /* 0x08 */
+    U16                             FirstDevice;                        /* 0x0C */
+    U16                             Reserved0E;                         /* 0x0E */
+} MPI3_IO_UNIT_PAGE9, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE9,
+  Mpi3IOUnitPage9_t, MPI3_POINTER pMpi3IOUnitPage9_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOUNIT9_PAGEVERSION                  (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED         (0x01)
+
+/**** Defines for the FirstDevice field ****/
+#define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN          (0xFFFF)
+
+/*****************************************************************************
+ *              IOC Configuration Pages                                      *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              IOC Page 0                                                   *
+ ****************************************************************************/
+typedef struct _MPI3_IOC_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U32                             Reserved08;             /* 0x08 */
+    U16                             VendorID;               /* 0x0C */
+    U16                             DeviceID;               /* 0x0E */
+    U8                              RevisionID;             /* 0x10 */
+    U8                              Reserved11[3];          /* 0x11 */
+    U32                             ClassCode;              /* 0x14 */
+    U16                             SubsystemVendorID;      /* 0x18 */
+    U16                             SubsystemID;            /* 0x1A */
+} MPI3_IOC_PAGE0, MPI3_POINTER PTR_MPI3_IOC_PAGE0,
+  Mpi3IOCPage0_t, MPI3_POINTER pMpi3IOCPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOC0_PAGEVERSION               (0x00)
+
+/*****************************************************************************
+ *              IOC Page 1                                                   *
+ ****************************************************************************/
+typedef struct _MPI3_IOC_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U32                             CoalescingTimeout;      /* 0x08 */
+    U8                              CoalescingDepth;        /* 0x0C */
+    U8                              PCISlotNum;             /* 0x0D */
+    U16                             Reserved0E;             /* 0x0E */
+} MPI3_IOC_PAGE1, MPI3_POINTER PTR_MPI3_IOC_PAGE1,
+  Mpi3IOCPage1_t, MPI3_POINTER pMpi3IOCPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOC1_PAGEVERSION               (0x00)
+
+/**** Defines for the PCISlotNum field ****/
+#define MPI3_IOC1_PCISLOTNUM_UNKNOWN        (0xFF)
+
+/*****************************************************************************
+ *              IOC Page 2                                                   *
+ ****************************************************************************/
+#ifndef MPI3_IOC2_EVENTMASK_WORDS
+#define MPI3_IOC2_EVENTMASK_WORDS           (4)
+#endif  /* MPI3_IOC2_EVENTMASK_WORDS */
+
+typedef struct _MPI3_IOC_PAGE2 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U32                             Reserved08;                             /* 0x08 */
+    U16                             SASBroadcastPrimitiveMasks;             /* 0x0C */
+    U16                             SASNotifyPrimitiveMasks;                /* 0x0E */
+    U32                             EventMasks[MPI3_IOC2_EVENTMASK_WORDS];  /* 0x10 */
+} MPI3_IOC_PAGE2, MPI3_POINTER PTR_MPI3_IOC_PAGE2,
+  Mpi3IOCPage2_t, MPI3_POINTER pMpi3IOCPage2_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_IOC2_PAGEVERSION               (0x00)
+
+
+/*****************************************************************************
+ *              UEFI BSD and HII Configuration Pages                         *
+ ****************************************************************************/
+typedef struct _MPI3_UEFIBSD_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
+    U32                             BSDOptions;         /* 0x08 */
+    U8                              SSUTimeout;         /* 0x0C */
+    U8                              IOTimeout;          /* 0x0D */
+    U8                              TURRetries;         /* 0x0E */
+    U8                              TURInterval;        /* 0x0F */
+    U8                              Reserved10;         /* 0x10 */
+    U8                              SecurityKeyTimeout; /* 0x11 */
+    U16                             Reserved12;         /* 0x12 */
+    U32                             Reserved14;         /* 0x14 */
+    U32                             Reserved18;         /* 0x18 */
+} MPI3_UEFIBSD_PAGE0, MPI3_POINTER PTR_MPI3_UEFIBSD_PAGE0,
+  Mpi3UefiBsdPage0_t, MPI3_POINTER pMpi3UefiBsdPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_UEFIBSD_PAGEVERSION               (0x00)
+
+/**** Defines for the BSDOptions field ****/
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_MASK              (0x00000003)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_AND_DEVS      (0x00000000)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_ONLY          (0x00000001)
+#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_NONE              (0x00000002)
+#define MPI3_UEFIBSD_BSDOPTS_DIS_HII_CONFIG_UTIL            (0x00000004)
+#define MPI3_UEFIBSD_BSDOPTS_EN_ADV_ADAPTER_CONFIG          (0x00000008)
+
+
+/*****************************************************************************
+ *              Security Configuration Pages                                *
+ ****************************************************************************/
+
+typedef union _MPI3_SECURITY_MAC {
+    U32                             Dword[16];
+    U16                             Word[32];
+    U8                              Byte[64];
+} MPI3_SECURITY_MAC, MPI3_POINTER PTR_MPI3_SECURITY_MAC,
+  Mpi3SecurityMAC_t, MPI3_POINTER pMpi3SecurityMAC_t;
+
+typedef union _MPI3_SECURITY_NONCE {
+    U32                             Dword[16];
+    U16                             Word[32];
+    U8                              Byte[64];
+} MPI3_SECURITY_NONCE, MPI3_POINTER PTR_MPI3_SECURITY_NONCE,
+  Mpi3SecurityNonce_t, MPI3_POINTER pMpi3SecurityNonce_t;
+
+/*****************************************************************************
+ *              Security Page 0                                             *
+ ****************************************************************************/
+
+typedef union _MPI3_SECURITY0_CERT_CHAIN {
+    U32                             Dword[1024];
+    U16                             Word[2048];
+    U8                              Byte[4096];
+} MPI3_SECURITY0_CERT_CHAIN, MPI3_POINTER PTR_MPI3_SECURITY0_CERT_CHAIN,
+  Mpi3Security0CertChain_t, MPI3_POINTER pMpi3Security0CertChain_t;
+
+typedef struct _MPI3_SECURITY_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U8                              SlotNumGroup;                           /* 0x08 */
+    U8                              SlotNum;                                /* 0x09 */
+    U16                             CertChainLength;                        /* 0x0A */
+    U8                              CertChainFlags;                         /* 0x0C */
+    U8                              Reserved0D[3];                          /* 0x0D */
+    U32                             BaseAsymAlgo;                           /* 0x10 */
+    U32                             BaseHashAlgo;                           /* 0x14 */
+    U32                             Reserved18[4];                          /* 0x18 */
+    MPI3_SECURITY_MAC               MAC;                                    /* 0x28 */
+    MPI3_SECURITY_NONCE             Nonce;                                  /* 0x68 */
+    MPI3_SECURITY0_CERT_CHAIN       CertificateChain;                       /* 0xA8 */
+} MPI3_SECURITY_PAGE0, MPI3_POINTER PTR_MPI3_SECURITY_PAGE0,
+  Mpi3SecurityPage0_t, MPI3_POINTER pMpi3SecurityPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SECURITY0_PAGEVERSION               (0x00)
+
+/**** Defines for the CertChainFlags field ****/
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK       (0x0E)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED     (0x00)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS   (0x02)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM       (0x04)
+#define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED              (0x01)
+
+/*****************************************************************************
+ *              Security Page 1                                             *
+ ****************************************************************************/
+
+#ifndef MPI3_SECURITY1_KEY_RECORD_MAX
+#define MPI3_SECURITY1_KEY_RECORD_MAX      1
+#endif  /* MPI3_SECURITY1_KEY_RECORD_MAX */
+
+#ifndef MPI3_SECURITY1_PAD_MAX
+#define MPI3_SECURITY1_PAD_MAX      1
+#endif  /* MPI3_SECURITY1_PAD_MAX */
+
+typedef union _MPI3_SECURITY1_KEY_DATA {
+    U32                             Dword[128];
+    U16                             Word[256];
+    U8                              Byte[512];
+} MPI3_SECURITY1_KEY_DATA, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_DATA,
+  Mpi3Security1KeyData_t, MPI3_POINTER pMpi3Security1KeyData_t;
+
+typedef struct _MPI3_SECURITY1_KEY_RECORD {
+    U8                              Flags;                                  /* 0x00 */
+    U8                              Consumer;                               /* 0x01 */
+    U16                             KeyDataSize;                            /* 0x02 */
+    U32                             AdditionalKeyData;                      /* 0x04 */
+    U32                             Reserved08[2];                          /* 0x08 */
+    MPI3_SECURITY1_KEY_DATA         KeyData;                                /* 0x10 */
+} MPI3_SECURITY1_KEY_RECORD, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_RECORD,
+  Mpi3Security1KeyRecord_t, MPI3_POINTER pMpi3Security1KeyRecord_t;
+
+/**** Defines for the Flags field ****/
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK            (0x1F)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID       (0x00)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC            (0x01)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES             (0x02)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE   (0x03)
+#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC    (0x04)
+
+/**** Defines for the Consumer field ****/
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID         (0x00)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE         (0x01)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN        (0x02)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_AUTH_DEV_KEY      (0x03)
+#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD     (0x04)
+
+typedef struct _MPI3_SECURITY_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                     /* 0x00 */
+    U32                             Reserved08[2];                              /* 0x08 */
+    MPI3_SECURITY_MAC               MAC;                                        /* 0x10 */
+    MPI3_SECURITY_NONCE             Nonce;                                      /* 0x50 */
+    U8                              NumKeys;                                    /* 0x90 */
+    U8                              Reserved91[3];                              /* 0x91 */
+    U32                             Reserved94[3];                              /* 0x94 */
+    MPI3_SECURITY1_KEY_RECORD       KeyRecord[MPI3_SECURITY1_KEY_RECORD_MAX];   /* 0xA0 */
+    U8                              Pad[MPI3_SECURITY1_PAD_MAX];                /* ??  */
+} MPI3_SECURITY_PAGE1, MPI3_POINTER PTR_MPI3_SECURITY_PAGE1,
+  Mpi3SecurityPage1_t, MPI3_POINTER pMpi3SecurityPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SECURITY1_PAGEVERSION               (0x00)
+
+/*****************************************************************************
+ *              SAS IO Unit Configuration Pages                              *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              SAS IO Unit Page 0                                           *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_IO_UNIT0_PHY_DATA {
+    U8              IOUnitPort;                         /* 0x00 */
+    U8              PortFlags;                          /* 0x01 */
+    U8              PhyFlags;                           /* 0x02 */
+    U8              NegotiatedLinkRate;                 /* 0x03 */
+    U16             ControllerPhyDeviceInfo;            /* 0x04 */
+    U16             Reserved06;                         /* 0x06 */
+    U16             AttachedDevHandle;                  /* 0x08 */
+    U16             ControllerDevHandle;                /* 0x0A */
+    U32             DiscoveryStatus;                    /* 0x0C */
+    U32             Reserved10;                         /* 0x10 */
+} MPI3_SAS_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT0_PHY_DATA,
+  Mpi3SasIOUnit0PhyData_t, MPI3_POINTER pMpi3SasIOUnit0PhyData_t;
+
+#ifndef MPI3_SAS_IO_UNIT0_PHY_MAX
+#define MPI3_SAS_IO_UNIT0_PHY_MAX           (1)
+#endif  /* MPI3_SAS_IO_UNIT0_PHY_MAX */
+
+typedef struct _MPI3_SAS_IO_UNIT_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U32                             Reserved08;                             /* 0x08 */
+    U8                              NumPhys;                                /* 0x0C */
+    U8                              Reserved0D[3];                          /* 0x0D */
+    MPI3_SAS_IO_UNIT0_PHY_DATA      PhyData[MPI3_SAS_IO_UNIT0_PHY_MAX];     /* 0x10 */
+} MPI3_SAS_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE0,
+  Mpi3SasIOUnitPage0_t, MPI3_POINTER pMpi3SasIOUnitPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASIOUNIT0_PAGEVERSION                         (0x00)
+
+/**** Defines for the PortFlags field ****/
+#define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS          (0x08)
+#define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG          (0x01)
+
+/**** Defines for the PhyFlags field ****/
+#define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT       (0x40)
+#define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT       (0x20)
+#define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED               (0x08)
+
+/**** Use MPI3_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field ****/
+
+/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/
+
+/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/
+
+/*****************************************************************************
+ *              SAS IO Unit Page 1                                           *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_IO_UNIT1_PHY_DATA {
+    U8              IOUnitPort;                         /* 0x00 */
+    U8              PortFlags;                          /* 0x01 */
+    U8              PhyFlags;                           /* 0x02 */
+    U8              MaxMinLinkRate;                     /* 0x03 */
+    U16             ControllerPhyDeviceInfo;            /* 0x04 */
+    U16             MaxTargetPortConnectTime;           /* 0x06 */
+    U32             Reserved08;                         /* 0x08 */
+} MPI3_SAS_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT1_PHY_DATA,
+  Mpi3SasIOUnit1PhyData_t, MPI3_POINTER pMpi3SasIOUnit1PhyData_t;
+
+#ifndef MPI3_SAS_IO_UNIT1_PHY_MAX
+#define MPI3_SAS_IO_UNIT1_PHY_MAX           (1)
+#endif  /* MPI3_SAS_IO_UNIT1_PHY_MAX */
+
+typedef struct _MPI3_SAS_IO_UNIT_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U16                             ControlFlags;                           /* 0x08 */
+    U16                             SASNarrowMaxQueueDepth;                 /* 0x0A */
+    U16                             AdditionalControlFlags;                 /* 0x0C */
+    U16                             SASWideMaxQueueDepth;                   /* 0x0E */
+    U8                              NumPhys;                                /* 0x10 */
+    U8                              SATAMaxQDepth;                          /* 0x11 */
+    U16                             Reserved12;                             /* 0x12 */
+    MPI3_SAS_IO_UNIT1_PHY_DATA      PhyData[MPI3_SAS_IO_UNIT1_PHY_MAX];     /* 0x14 */
+} MPI3_SAS_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE1,
+  Mpi3SasIOUnitPage1_t, MPI3_POINTER pMpi3SasIOUnitPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASIOUNIT1_PAGEVERSION                                 (0x00)
+
+/**** Defines for the ControlFlags field ****/
+#define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST         (0x8000)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE                    (0x1000)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED             (0x0080)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED                 (0x0040)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED                   (0x0020)
+#define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED                   (0x0010)
+#define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL           (0x0008)
+#define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL                 (0x0004)
+#define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY                 (0x0002)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK                     (0x0001)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME              (0x0000)
+#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS              (0x0001)
+
+/**** Defines for the AdditionalControlFlags field ****/
+#define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT                 (0x0100)
+#define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
+#define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
+#define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION        (0x0020)
+#define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
+#define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
+#define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
+#define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
+#define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
+
+/**** Defines for the PortFlags field ****/
+#define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)
+
+/**** Defines for the PhyFlags field ****/
+#define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT               (0x40)
+#define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT               (0x20)
+#define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)
+
+/**** Defines for the MaxMinLinkRate field ****/
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK                          (0xF0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT                         (4)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0                           (0xA0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0                          (0xB0)
+#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5                          (0xC0)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK                          (0x0F)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0                           (0x0A)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0                          (0x0B)
+#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5                          (0x0C)
+
+/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/
+
+/*****************************************************************************
+ *              SAS IO Unit Page 2                                           *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS {
+    U8              ControlFlags;                       /* 0x00 */
+    U8              Reserved01;                         /* 0x01 */
+    U16             InactivityTimerExponent;            /* 0x02 */
+    U8              SATAPartialTimeout;                 /* 0x04 */
+    U8              Reserved05;                         /* 0x05 */
+    U8              SATASlumberTimeout;                 /* 0x06 */
+    U8              Reserved07;                         /* 0x07 */
+    U8              SASPartialTimeout;                  /* 0x08 */
+    U8              Reserved09;                         /* 0x09 */
+    U8              SASSlumberTimeout;                  /* 0x0A */
+    U8              Reserved0B;                         /* 0x0B */
+} MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS,
+  Mpi3SasIOUnit2PhyPmSettings_t, MPI3_POINTER pMpi3SasIOUnit2PhyPmSettings_t;
+
+#ifndef MPI3_SAS_IO_UNIT2_PHY_MAX
+#define MPI3_SAS_IO_UNIT2_PHY_MAX           (1)
+#endif  /* MPI3_SAS_IO_UNIT2_PHY_MAX */
+
+typedef struct _MPI3_SAS_IO_UNIT_PAGE2 {
+    MPI3_CONFIG_PAGE_HEADER             Header;                                                     /* 0x00 */
+    U8                                  NumPhys;                                                    /* 0x08 */
+    U8                                  Reserved09[3];                                              /* 0x09 */
+    U32                                 Reserved0C;                                                 /* 0x0C */
+    MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS   SASPhyPowerManagementSettings[MPI3_SAS_IO_UNIT2_PHY_MAX];   /* 0x10 */
+} MPI3_SAS_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE2,
+  Mpi3SasIOUnitPage2_t, MPI3_POINTER pMpi3SasIOUnitPage2_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASIOUNIT2_PAGEVERSION                     (0x00)
+
+/**** Defines for the ControlFlags field ****/
+#define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
+#define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
+#define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
+#define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
+
+/**** Defines for the InactivityTimerExponent field ****/
+#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK            (0x7000)
+#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT           (12)
+#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK            (0x0700)
+#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT           (8)
+#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK           (0x0070)
+#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT          (4)
+#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK           (0x0007)
+#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT          (0)
+
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS             (7)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND              (6)
+#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS    (5)
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS        (4)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND         (3)
+#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS    (2)
+#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS        (1)
+#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND         (0)
+
+/*****************************************************************************
+ *              SAS IO Unit Page 3                                           *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_IO_UNIT_PAGE3 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                         /* 0x00 */
+    U32                             Reserved08;                     /* 0x08 */
+    U32                             PowerManagementCapabilities;    /* 0x0C */
+} MPI3_SAS_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE3,
+  Mpi3SasIOUnitPage3_t, MPI3_POINTER pMpi3SasIOUnitPage3_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASIOUNIT3_PAGEVERSION                     (0x00)
+
+/**** Defines for the PowerManagementCapabilities field ****/
+#define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE        (0x00000800)
+#define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE        (0x00000400)
+#define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE       (0x00000200)
+#define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE       (0x00000100)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE      (0x00000008)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE      (0x00000004)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE     (0x00000002)
+#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE     (0x00000001)
+
+
+/*****************************************************************************
+ *              SAS Expander Configuration Pages                             *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              SAS Expander Page 0                                          *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_EXPANDER_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                         /* 0x00 */
+    U8                              IOUnitPort;                     /* 0x08 */
+    U8                              ReportGenLength;                /* 0x09 */
+    U16                             EnclosureHandle;                /* 0x0A */
+    U32                             Reserved0C;                     /* 0x0C */
+    U64                             SASAddress;                     /* 0x10 */
+    U32                             DiscoveryStatus;                /* 0x18 */
+    U16                             DevHandle;                      /* 0x1C */
+    U16                             ParentDevHandle;                /* 0x1E */
+    U16                             ExpanderChangeCount;            /* 0x20 */
+    U16                             ExpanderRouteIndexes;           /* 0x22 */
+    U8                              NumPhys;                        /* 0x24 */
+    U8                              SASLevel;                       /* 0x25 */
+    U16                             Flags;                          /* 0x26 */
+    U16                             STPBusInactivityTimeLimit;      /* 0x28 */
+    U16                             STPMaxConnectTimeLimit;         /* 0x2A */
+    U16                             STP_SMP_NexusLossTime;          /* 0x2C */
+    U16                             MaxNumRoutedSASAddresses;       /* 0x2E */
+    U64                             ActiveZoneManagerSASAddress;    /* 0x30 */
+    U16                             ZoneLockInactivityLimit;        /* 0x38 */
+    U16                             Reserved3A;                     /* 0x3A */
+    U8                              TimeToReducedFunc;              /* 0x3C */
+    U8                              InitialTimeToReducedFunc;       /* 0x3D */
+    U8                              MaxReducedFuncTime;             /* 0x3E */
+    U8                              ExpStatus;                      /* 0x3F */
+} MPI3_SAS_EXPANDER_PAGE0, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE0,
+  Mpi3SasExpanderPage0_t, MPI3_POINTER pMpi3SasExpanderPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASEXPANDER0_PAGEVERSION                       (0x00)
+
+/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/
+
+/**** Defines for the Flags field ****/
+#define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY       (0x2000)
+#define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED                 (0x1000)
+#define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES     (0x0800)
+#define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES      (0x0400)
+#define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT              (0x0200)
+#define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING              (0x0100)
+#define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT      (0x0080)
+#define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE        (0x0010)
+#define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG               (0x0004)
+#define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS          (0x0002)
+#define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG          (0x0001)
+
+/**** Defines for the ExpStatus field ****/
+#define MPI3_SASEXPANDER0_ES_NOT_RESPONDING                 (0x02)
+#define MPI3_SASEXPANDER0_ES_RESPONDING                     (0x03)
+#define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING           (0x04)
+
+/*****************************************************************************
+ *              SAS Expander Page 1                                          *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_EXPANDER_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                     /* 0x00 */
+    U8                              IOUnitPort;                 /* 0x08 */
+    U8                              Reserved09[3];              /* 0x09 */
+    U8                              NumPhys;                    /* 0x0C */
+    U8                              Phy;                        /* 0x0D */
+    U16                             NumTableEntriesProgrammed;  /* 0x0E */
+    U8                              ProgrammedLinkRate;         /* 0x10 */
+    U8                              HwLinkRate;                 /* 0x11 */
+    U16                             AttachedDevHandle;          /* 0x12 */
+    U32                             PhyInfo;                    /* 0x14 */
+    U16                             AttachedDeviceInfo;         /* 0x18 */
+    U16                             Reserved1A;                 /* 0x1A */
+    U16                             ExpanderDevHandle;          /* 0x1C */
+    U8                              ChangeCount;                /* 0x1E */
+    U8                              NegotiatedLinkRate;         /* 0x1F */
+    U8                              PhyIdentifier;              /* 0x20 */
+    U8                              AttachedPhyIdentifier;      /* 0x21 */
+    U8                              Reserved22;                 /* 0x22 */
+    U8                              DiscoveryInfo;              /* 0x23 */
+    U32                             AttachedPhyInfo;            /* 0x24 */
+    U8                              ZoneGroup;                  /* 0x28 */
+    U8                              SelfConfigStatus;           /* 0x29 */
+    U16                             Reserved2A;                 /* 0x2A */
+    U16                             Slot;                       /* 0x2C */
+    U16                             SlotIndex;                  /* 0x2E */
+} MPI3_SAS_EXPANDER_PAGE1, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE1,
+  Mpi3SasExpanderPage1_t, MPI3_POINTER pMpi3SasExpanderPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASEXPANDER1_PAGEVERSION                   (0x00)
+
+/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/
+
+/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/
+
+/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/
+
+/**** Defines for the AttachedDeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/
+
+/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/
+
+/**** Defines for the DiscoveryInfo field ****/
+#define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED     (0x04)
+#define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE   (0x02)
+#define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES   (0x01)
+
+/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/
+
+/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/
+
+/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/
+
+
+/*****************************************************************************
+ *              SAS Port Configuration Pages                                 *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              SAS Port Page 0                                              *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PORT_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U8                              PortNumber;             /* 0x08 */
+    U8                              Reserved09;             /* 0x09 */
+    U8                              PortWidth;              /* 0x0A */
+    U8                              Reserved0B;             /* 0x0B */
+    U8                              ZoneGroup;              /* 0x0C */
+    U8                              Reserved0D[3];          /* 0x0D */
+    U64                             SASAddress;             /* 0x10 */
+    U16                             DeviceInfo;             /* 0x18 */
+    U16                             Reserved1A;             /* 0x1A */
+    U32                             Reserved1C;             /* 0x1C */
+} MPI3_SAS_PORT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PORT_PAGE0,
+  Mpi3SasPortPage0, MPI3_POINTER pMpi3SasPortPage0;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPORT0_PAGEVERSION                       (0x00)
+
+/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/
+
+/*****************************************************************************
+ *              SAS PHY Configuration Pages                                  *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              SAS PHY Page 0                                               *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PHY_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U16                             OwnerDevHandle;         /* 0x08 */
+    U16                             Reserved0A;             /* 0x0A */
+    U16                             AttachedDevHandle;      /* 0x0C */
+    U8                              AttachedPhyIdentifier;  /* 0x0E */
+    U8                              Reserved0F;             /* 0x0F */
+    U32                             AttachedPhyInfo;        /* 0x10 */
+    U8                              ProgrammedLinkRate;     /* 0x14 */
+    U8                              HwLinkRate;             /* 0x15 */
+    U8                              ChangeCount;            /* 0x16 */
+    U8                              Flags;                  /* 0x17 */
+    U32                             PhyInfo;                /* 0x18 */
+    U8                              NegotiatedLinkRate;     /* 0x1C */
+    U8                              Reserved1D[3];          /* 0x1D */
+    U16                             Slot;                   /* 0x20 */
+    U16                             SlotIndex;              /* 0x22 */
+} MPI3_SAS_PHY_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE0,
+  Mpi3SasPhyPage0_t, MPI3_POINTER pMpi3SasPhyPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPHY0_PAGEVERSION                        (0x00)
+
+/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/
+
+/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/
+
+/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/
+
+/**** Defines for the Flags field ****/
+#define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC      (0x01)
+
+/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/
+
+/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/
+
+/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/
+
+/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/
+
+/*****************************************************************************
+ *              SAS PHY Page 1                                               *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PHY_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                         /* 0x00 */
+    U32                             Reserved08;                     /* 0x08 */
+    U32                             InvalidDwordCount;              /* 0x0C */
+    U32                             RunningDisparityErrorCount;     /* 0x10 */
+    U32                             LossDwordSynchCount;            /* 0x14 */
+    U32                             PhyResetProblemCount;           /* 0x18 */
+} MPI3_SAS_PHY_PAGE1, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE1,
+  Mpi3SasPhyPage1_t, MPI3_POINTER pMpi3SasPhyPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPHY1_PAGEVERSION                        (0x00)
+
+/*****************************************************************************
+ *              SAS PHY Page 2                                               *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PHY2_PHY_EVENT {
+    U8      PhyEventCode;       /* 0x00 */
+    U8      Reserved01[3];      /* 0x01 */
+    U32     PhyEventInfo;       /* 0x04 */
+} MPI3_SAS_PHY2_PHY_EVENT, MPI3_POINTER PTR_MPI3_SAS_PHY2_PHY_EVENT,
+  Mpi3SasPhy2PhyEvent_t, MPI3_POINTER pMpi3SasPhy2PhyEvent_t;
+
+/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines */
+
+#ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX
+#define MPI3_SAS_PHY2_PHY_EVENT_MAX         (1)
+#endif  /* MPI3_SAS_PHY2_PHY_EVENT_MAX */
+
+typedef struct _MPI3_SAS_PHY_PAGE2 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                     /* 0x00 */
+    U32                             Reserved08;                                 /* 0x08 */
+    U8                              NumPhyEvents;                               /* 0x0C */
+    U8                              Reserved0D[3];                              /* 0x0D */
+    MPI3_SAS_PHY2_PHY_EVENT         PhyEvent[MPI3_SAS_PHY2_PHY_EVENT_MAX];      /* 0x10 */
+} MPI3_SAS_PHY_PAGE2, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE2,
+  Mpi3SasPhyPage2_t, MPI3_POINTER pMpi3SasPhyPage2_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPHY2_PAGEVERSION                        (0x00)
+
+/*****************************************************************************
+ *              SAS PHY Page 3                                               *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PHY3_PHY_EVENT_CONFIG {
+    U8      PhyEventCode;           /* 0x00 */
+    U8      Reserved01[3];          /* 0x01 */
+    U8      CounterType;            /* 0x04 */
+    U8      ThresholdWindow;        /* 0x05 */
+    U8      TimeUnits;              /* 0x06 */
+    U8      Reserved07;             /* 0x07 */
+    U32     EventThreshold;         /* 0x08 */
+    U16     ThresholdFlags;         /* 0x0C */
+    U16     Reserved0E;             /* 0x0E */
+} MPI3_SAS_PHY3_PHY_EVENT_CONFIG, MPI3_POINTER PTR_MPI3_SAS_PHY3_PHY_EVENT_CONFIG,
+  Mpi3SasPhy3PhyEventConfig_t, MPI3_POINTER pMpi3SasPhy3PhyEventConfig_t;
+
+/**** Defines for the PhyEventCode field ****/
+#define MPI3_SASPHY3_EVENT_CODE_NO_EVENT                    (0x00)
+#define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD               (0x01)
+#define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR     (0x02)
+#define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC             (0x03)
+#define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM           (0x04)
+#define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW     (0x05)
+#define MPI3_SASPHY3_EVENT_CODE_RX_ERROR                    (0x06)
+#define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS             (0x07)
+#define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC        (0x08)
+#define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR         (0x20)
+#define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT           (0x21)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT           (0x22)
+#define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT           (0x23)
+#define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT           (0x24)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON   (0x25)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON   (0x26)
+#define MPI3_SASPHY3_EVENT_CODE_TX_BREAK                    (0x27)
+#define MPI3_SASPHY3_EVENT_CODE_RX_BREAK                    (0x28)
+#define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT               (0x29)
+#define MPI3_SASPHY3_EVENT_CODE_CONNECTION                  (0x2A)
+#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED      (0x2B)
+#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME        (0x2C)
+#define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME          (0x2D)
+#define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME           (0x2E)
+#define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN                (0x2F)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES               (0x40)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES               (0x41)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES         (0x42)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES         (0x43)
+#define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED           (0x44)
+#define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED           (0x45)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES              (0x50)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES              (0x51)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW               (0x52)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES               (0x60)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES               (0x61)
+#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES         (0x63)
+#define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT             (0xD0)
+#define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE    (0xD1)
+#define MPI3_SASPHY3_EVENT_CODE_RX_AIP                      (0xD2)
+#define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME             (0xD3)
+#define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME    (0xD4)
+#define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME                 (0xD5)
+#define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT       (0xD6)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START               (0xD7)
+#define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT        (0xD8)
+#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN           (0xD9)
+#define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE        (0xDA)
+#define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE       (0xDB)
+#define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE        (0xDC)
+
+/**** Defines for the CounterType field ****/
+#define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING                  (0x00)
+#define MPI3_SASPHY3_COUNTER_TYPE_SATURATING                (0x01)
+#define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE                (0x02)
+
+/**** Defines for the TimeUnits field ****/
+#define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS             (0x00)
+#define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS            (0x01)
+#define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND               (0x02)
+#define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS             (0x03)
+
+/**** Defines for the ThresholdFlags field ****/
+#define MPI3_SASPHY3_TFLAGS_PHY_RESET                       (0x0002)
+#define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY                    (0x0001)
+
+#ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX
+#define MPI3_SAS_PHY3_PHY_EVENT_MAX         (1)
+#endif  /* MPI3_SAS_PHY3_PHY_EVENT_MAX */
+
+typedef struct _MPI3_SAS_PHY_PAGE3 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                         /* 0x00 */
+    U32                             Reserved08;                                     /* 0x08 */
+    U8                              NumPhyEvents;                                   /* 0x0C */
+    U8                              Reserved0D[3];                                  /* 0x0D */
+    MPI3_SAS_PHY3_PHY_EVENT_CONFIG  PhyEventConfig[MPI3_SAS_PHY3_PHY_EVENT_MAX];    /* 0x10 */
+} MPI3_SAS_PHY_PAGE3, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE3,
+  Mpi3SasPhyPage3_t, MPI3_POINTER pMpi3SasPhyPage3_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPHY3_PAGEVERSION                        (0x00)
+
+/*****************************************************************************
+ *              SAS PHY Page 4                                               *
+ ****************************************************************************/
+typedef struct _MPI3_SAS_PHY_PAGE4 {
+    MPI3_CONFIG_PAGE_HEADER         Header;             /* 0x00 */
+    U8                              Reserved08[3];      /* 0x08 */
+    U8                              Flags;              /* 0x0B */
+    U8                              InitialFrame[28];   /* 0x0C */
+} MPI3_SAS_PHY_PAGE4, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE4,
+  Mpi3SasPhyPage4_t, MPI3_POINTER pMpi3SasPhyPage4_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_SASPHY4_PAGEVERSION                        (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_SASPHY4_FLAGS_FRAME_VALID                  (0x02)
+#define MPI3_SASPHY4_FLAGS_SATA_FRAME                   (0x01)
+
+
+/*****************************************************************************
+ *              Common definitions used by PCIe Configuration Pages          *
+ ****************************************************************************/
+
+/**** Defines for Negotiated Link Rates ****/
+#define MPI3_PCIE_LINK_RETIMERS_MASK                    (0x30)
+#define MPI3_PCIE_LINK_RETIMERS_SHIFT                   (4)
+#define MPI3_PCIE_NEG_LINK_RATE_MASK                    (0x0F)
+#define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN                 (0x00)
+#define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED            (0x01)
+#define MPI3_PCIE_NEG_LINK_RATE_2_5                     (0x02)
+#define MPI3_PCIE_NEG_LINK_RATE_5_0                     (0x03)
+#define MPI3_PCIE_NEG_LINK_RATE_8_0                     (0x04)
+#define MPI3_PCIE_NEG_LINK_RATE_16_0                    (0x05)
+#define MPI3_PCIE_NEG_LINK_RATE_32_0                    (0x06)
+
+/*****************************************************************************
+ *              PCIe IO Unit Configuration Pages                             *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              PCIe IO Unit Page 0                                          *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_IO_UNIT0_PHY_DATA {
+    U8      Link;                       /* 0x00 */
+    U8      LinkFlags;                  /* 0x01 */
+    U8      PhyFlags;                   /* 0x02 */
+    U8      NegotiatedLinkRate;         /* 0x03 */
+    U16     AttachedDevHandle;          /* 0x04 */
+    U16     ControllerDevHandle;        /* 0x06 */
+    U32     EnumerationStatus;          /* 0x08 */
+    U8      IOUnitPort;                 /* 0x0C */
+    U8      Reserved0D[3];              /* 0x0D */
+} MPI3_PCIE_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT0_PHY_DATA,
+  Mpi3PcieIOUnit0PhyData_t, MPI3_POINTER pMpi3PcieIOUnit0PhyData_t;
+
+/**** Defines for the LinkFlags field ****/
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK      (0x10)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1   (0x00)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE   (0x10)
+#define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS        (0x08)
+
+/**** Defines for the PhyFlags field ****/
+#define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED          (0x08)
+#define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY              (0x01)
+
+/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/
+
+/**** Defines for the EnumerationStatus field ****/
+#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED   (0x80000000)
+#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED       (0x40000000)
+#define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED      (0x20000000)
+#define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES      (0x10000000)
+
+#ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX
+#define MPI3_PCIE_IO_UNIT0_PHY_MAX      (1)
+#endif  /* MPI3_PCIE_IO_UNIT0_PHY_MAX */
+
+typedef struct _MPI3_PCIE_IO_UNIT_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U32                             Reserved08;                             /* 0x08 */
+    U8                              NumPhys;                                /* 0x0C */
+    U8                              InitStatus;                             /* 0x0D */
+    U16                             Reserved0E;                             /* 0x0E */
+    MPI3_PCIE_IO_UNIT0_PHY_DATA     PhyData[MPI3_PCIE_IO_UNIT0_PHY_MAX];    /* 0x10 */
+} MPI3_PCIE_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE0,
+  Mpi3PcieIOUnitPage0_t, MPI3_POINTER pMpi3PcieIOUnitPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIEIOUNIT0_PAGEVERSION                        (0x00)
+
+/**** Defines for the InitStatus field ****/
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS               (0x00)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION    (0x01)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED    (0x02)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED   (0x03)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS            (0x04)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG      (0x05)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH      (0x06)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE    (0x07)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE       (0x08)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START         (0xF0)
+#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END           (0xFF)
+
+/*****************************************************************************
+ *              PCIe IO Unit Page 1                                          *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_IO_UNIT1_PHY_DATA {
+    U8      Link;                       /* 0x00 */
+    U8      LinkFlags;                  /* 0x01 */
+    U8      PhyFlags;                   /* 0x02 */
+    U8      MaxMinLinkRate;             /* 0x03 */
+    U32     Reserved04;                 /* 0x04 */
+    U32     Reserved08;                 /* 0x08 */
+} MPI3_PCIE_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT1_PHY_DATA,
+  Mpi3PcieIOUnit1PhyData_t, MPI3_POINTER pMpi3PcieIOUnit1PhyData_t;
+
+/**** Defines for the LinkFlags field ****/
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK                     (0x03)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK      (0x00)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS                  (0x01)
+#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS                  (0x02)
+
+/**** Defines for the PhyFlags field ****/
+#define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE               (0x08)
+
+/**** Defines for the MaxMinLinkRate ****/
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK                      (0xF0)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT                     (4)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5                       (0x20)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0                       (0x30)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0                       (0x40)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0                      (0x50)
+#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0                      (0x60)
+
+#ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX
+#define MPI3_PCIE_IO_UNIT1_PHY_MAX          (1)
+#endif  /* MPI3_PCIE_IO_UNIT1_PHY_MAX */
+
+typedef struct _MPI3_PCIE_IO_UNIT_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U32                             ControlFlags;                           /* 0x08 */
+    U32                             Reserved0C;                             /* 0x0C */
+    U8                              NumPhys;                                /* 0x10 */
+    U8                              Reserved11;                             /* 0x11 */
+    U16                             Reserved12;                             /* 0x12 */
+    MPI3_PCIE_IO_UNIT1_PHY_DATA     PhyData[MPI3_PCIE_IO_UNIT1_PHY_MAX];    /* 0x14 */
+} MPI3_PCIE_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE1,
+  Mpi3PcieIOUnitPage1_t, MPI3_POINTER pMpi3PcieIOUnitPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIEIOUNIT1_PAGEVERSION                        (0x00)
+
+/*****************************************************************************
+ *              PCIe IO Unit Page 2                                          *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_IO_UNIT_PAGE2 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                                 /* 0x00 */
+    U16                             NVMeMaxQueueDepth;                      /* 0x08 */
+    U16                             Reserved0A;                             /* 0x0A */
+    U8                              NVMeAbortTO;                            /* 0x0C */
+    U8                              Reserved0D;                             /* 0x0D */
+    U16                             Reserved0E;                             /* 0x0E */
+} MPI3_PCIE_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE2,
+  Mpi3PcieIOUnitPage2_t, MPI3_POINTER pMpi3PcieIOUnitPage2_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIEIOUNIT2_PAGEVERSION                        (0x00)
+
+/*****************************************************************************
+ *              PCIe Switch Configuration Pages                              *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              PCIe Switch Page 0                                           *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_SWITCH_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER     Header;             /* 0x00 */
+    U8                          IOUnitPort;         /* 0x08 */
+    U8                          SwitchStatus;       /* 0x09 */
+    U8                          Reserved0A[2];      /* 0x0A */
+    U16                         DevHandle;          /* 0x0C */
+    U16                         ParentDevHandle;    /* 0x0E */
+    U8                          NumPorts;           /* 0x10 */
+    U8                          PCIeLevel;          /* 0x11 */
+    U16                         Reserved12;         /* 0x12 */
+    U32                         Reserved14;         /* 0x14 */
+    U32                         Reserved18;         /* 0x18 */
+    U32                         Reserved1C;         /* 0x1C */
+} MPI3_PCIE_SWITCH_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE0,
+  Mpi3PcieSwitchPage0_t, MPI3_POINTER pMpi3PcieSwitchPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIESWITCH0_PAGEVERSION                  (0x00)
+
+/**** Defines for the SwitchStatus field ****/
+#define MPI3_PCIESWITCH0_SS_NOT_RESPONDING            (0x02)
+#define MPI3_PCIESWITCH0_SS_RESPONDING                (0x03)
+#define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING      (0x04)
+
+/*****************************************************************************
+ *              PCIe Switch Page 1                                           *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_SWITCH_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER     Header;                 /* 0x00 */
+    U8                          IOUnitPort;             /* 0x08 */
+    U8                          Reserved09[3];          /* 0x09 */
+    U8                          NumPorts;               /* 0x0C */
+    U8                          PortNum;                /* 0x0D */
+    U16                         AttachedDevHandle;      /* 0x0E */
+    U16                         SwitchDevHandle;        /* 0x10 */
+    U8                          NegotiatedPortWidth;    /* 0x12 */
+    U8                          NegotiatedLinkRate;     /* 0x13 */
+    U16                         Slot;                   /* 0x14 */
+    U16                         SlotIndex;              /* 0x16 */
+    U32                         Reserved18;             /* 0x18 */
+} MPI3_PCIE_SWITCH_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE1,
+  Mpi3PcieSwitchPage1_t, MPI3_POINTER pMpi3PcieSwitchPage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIESWITCH1_PAGEVERSION        (0x00)
+
+/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/
+
+/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/
+
+/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/
+
+/*****************************************************************************
+ *              PCIe Link Configuration Pages                                *
+ ****************************************************************************/
+typedef struct _MPI3_PCIE_LINK_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER     Header;                 /* 0x00 */
+    U8                          Link;                   /* 0x08 */
+    U8                          Reserved09[3];          /* 0x09 */
+    U32                         CorrectableErrorCount;  /* 0x0C */
+    U16                         NFatalErrorCount;       /* 0x10 */
+    U16                         Reserved12;             /* 0x12 */
+    U16                         FatalErrorCount;        /* 0x14 */
+    U16                         Reserved16;             /* 0x16 */
+} MPI3_PCIE_LINK_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_LINK_PAGE0,
+  Mpi3PcieLinkPage0_t, MPI3_POINTER pMpi3PcieLinkPage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_PCIELINK0_PAGEVERSION          (0x00)
+
+
+/*****************************************************************************
+ *              Enclosure Configuration Pages                                *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              Enclosure Page 0                                             *
+ ****************************************************************************/
+typedef struct _MPI3_ENCLOSURE_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U64                             EnclosureLogicalID;     /* 0x08 */
+    U16                             Flags;                  /* 0x10 */
+    U16                             EnclosureHandle;        /* 0x12 */
+    U16                             NumSlots;               /* 0x14 */
+    U16                             StartSlot;              /* 0x16 */
+    U8                              IOUnitPort;             /* 0x18 */
+    U8                              EnclosureLevel;         /* 0x19 */
+    U16                             SEPDevHandle;           /* 0x1A */
+    U32                             Reserved1C;             /* 0x1C */
+} MPI3_ENCLOSURE_PAGE0, MPI3_POINTER PTR_MPI3_ENCLOSURE_PAGE0,
+  Mpi3EnclosurePage0_t, MPI3_POINTER pMpi3EnclosurePage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_ENCLOSURE0_PAGEVERSION                     (0x00)
+
+/**** Defines for the Flags field ****/
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK                (0xC000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL             (0x0000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS                 (0x4000)
+#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE                (0x8000)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK         (0x0010)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND            (0x0000)
+#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT              (0x0010)
+#define MPI3_ENCLS0_FLAGS_MNG_MASK                      (0x000F)
+#define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN                   (0x0000)
+#define MPI3_ENCLS0_FLAGS_MNG_IOC_SES                   (0x0001)
+#define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE             (0x0002)
+
+/**** Defines for the PhysicalPort field - use MPI3_DEVICE0_PHYPORT_ defines ****/
+
+/*****************************************************************************
+ *              Device Configuration Pages                                   *
+ ****************************************************************************/
+
+/*****************************************************************************
+ *              Common definitions used by Device Configuration Pages           *
+ ****************************************************************************/
+
+/**** Defines for the DeviceForm field ****/
+#define MPI3_DEVICE_DEVFORM_SAS_SATA                    (0x00)
+#define MPI3_DEVICE_DEVFORM_PCIE                        (0x01)
+#define MPI3_DEVICE_DEVFORM_VD                          (0x02)
+
+/*****************************************************************************
+ *              Device Page 0                                                *
+ ****************************************************************************/
+typedef struct _MPI3_DEVICE0_SAS_SATA_FORMAT {
+    U64     SASAddress;                 /* 0x00 */
+    U16     Flags;                      /* 0x08 */
+    U16     DeviceInfo;                 /* 0x0A */
+    U8      PhyNum;                     /* 0x0C */
+    U8      AttachedPhyIdentifier;      /* 0x0D */
+    U8      MaxPortConnections;         /* 0x0E */
+    U8      ZoneGroup;                  /* 0x0F */
+} MPI3_DEVICE0_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_SAS_SATA_FORMAT,
+  Mpi3Device0SasSataFormat_t, MPI3_POINTER pMpi3Device0SasSataFormat_t;
+
+/**** Defines for the Flags field ****/
+#define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP          (0x0200)
+#define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP          (0x0100)
+#define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY         (0x0080)
+#define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE          (0x0040)
+#define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV           (0x0020)
+#define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA            (0x0010)
+#define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP           (0x0008)
+#define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP             (0x0004)
+#define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP             (0x0002)
+#define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP          (0x0001)
+
+/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) ****/
+
+typedef struct _MPI3_DEVICE0_PCIE_FORMAT {
+    U8      SupportedLinkRates;         /* 0x00 */
+    U8      MaxPortWidth;               /* 0x01 */
+    U8      NegotiatedPortWidth;        /* 0x02 */
+    U8      NegotiatedLinkRate;         /* 0x03 */
+    U8      PortNum;                    /* 0x04 */
+    U8      ControllerResetTO;          /* 0x05 */
+    U16     DeviceInfo;                 /* 0x06 */
+    U32     MaximumDataTransferSize;    /* 0x08 */
+    U32     Capabilities;               /* 0x0C */
+    U16     NOIOB;                      /* 0x10 */
+    U8      NVMeAbortTO;                /* 0x12 */
+    U8      PageSize;                   /* 0x13 */
+    U16     ShutdownLatency;            /* 0x14 */
+    U16     Reserved16;                 /* 0x16 */
+} MPI3_DEVICE0_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_PCIE_FORMAT,
+  Mpi3Device0PcieFormat_t, MPI3_POINTER pMpi3Device0PcieFormat_t;
+
+/**** Defines for the SupportedLinkRates field ****/
+#define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP           (0x10)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP           (0x08)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP            (0x04)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP            (0x02)
+#define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP            (0x01)
+
+/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/
+
+/**** Defines for DeviceInfo bitfield ****/
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK             (0x0003)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE        (0x0000)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE      (0x0001)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE    (0x0002)
+#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE      (0x0003)
+
+/**** Defines for the Capabilities field ****/
+#define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED            (0x00000010)
+#define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED      (0x00000008)
+#define MPI3_DEVICE0_PCIE_CAP_NVME_SGL_ENABLED              (0x00000004)
+#define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP           (0x00000002)
+#define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP                      (0x00000001)
+
+typedef struct _MPI3_DEVICE0_VD_FORMAT {
+    U8      VdState;              /* 0x00 */
+    U8      RAIDLevel;            /* 0x01 */
+    U16     DeviceInfo;           /* 0x02 */
+    U16     Flags;                /* 0x04 */
+    U16     Reserved06;           /* 0x06 */
+    U32     Reserved08[2];        /* 0x08 */
+} MPI3_DEVICE0_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_VD_FORMAT,
+  Mpi3Device0VdFormat_t, MPI3_POINTER pMpi3Device0VdFormat_t;
+
+/**** Defines for the VdState field ****/
+#define MPI3_DEVICE0_VD_STATE_OFFLINE                       (0x00)
+#define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED            (0x01)
+#define MPI3_DEVICE0_VD_STATE_DEGRADED                      (0x02)
+#define MPI3_DEVICE0_VD_STATE_OPTIMAL                       (0x03)
+
+/**** Defines for RAIDLevel field ****/
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0                    (0)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1                    (1)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5                    (5)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6                    (6)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10                   (10)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50                   (50)
+#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60                   (60)
+
+/**** Defines for DeviceInfo field ****/
+#define MPI3_DEVICE0_VD_DEVICE_INFO_HDD                     (0x0010)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SSD                     (0x0008)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_NVME                    (0x0004)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SATA                    (0x0002)
+#define MPI3_DEVICE0_VD_DEVICE_INFO_SAS                     (0x0001)
+
+/**** Defines for the Flags field ****/
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_MASK            (0x0003)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_NONE            (0x0000)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_HOST            (0x0001)
+#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_IOC             (0x0002)
+
+typedef union _MPI3_DEVICE0_DEV_SPEC_FORMAT {
+    MPI3_DEVICE0_SAS_SATA_FORMAT        SasSataFormat;
+    MPI3_DEVICE0_PCIE_FORMAT            PcieFormat;
+    MPI3_DEVICE0_VD_FORMAT              VdFormat;
+} MPI3_DEVICE0_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_DEV_SPEC_FORMAT,
+  Mpi3Device0DevSpecFormat_t, MPI3_POINTER pMpi3Device0DevSpecFormat_t;
+
+typedef struct _MPI3_DEVICE_PAGE0 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U16                             DevHandle;              /* 0x08 */
+    U16                             ParentDevHandle;        /* 0x0A */
+    U16                             Slot;                   /* 0x0C */
+    U16                             EnclosureHandle;        /* 0x0E */
+    U64                             WWID;                   /* 0x10 */
+    U16                             PersistentID;           /* 0x18 */
+    U8                              IOUnitPort;             /* 0x1A */
+    U8                              AccessStatus;           /* 0x1B */
+    U16                             Flags;                  /* 0x1C */
+    U16                             Reserved1E;             /* 0x1E */
+    U16                             SlotIndex;              /* 0x20 */
+    U16                             QueueDepth;             /* 0x22 */
+    U8                              Reserved24[3];          /* 0x24 */
+    U8                              DeviceForm;             /* 0x27 */
+    MPI3_DEVICE0_DEV_SPEC_FORMAT    DeviceSpecific;         /* 0x28 */
+} MPI3_DEVICE_PAGE0, MPI3_POINTER PTR_MPI3_DEVICE_PAGE0,
+  Mpi3DevicePage0_t, MPI3_POINTER pMpi3DevicePage0_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_DEVICE0_PAGEVERSION                        (0x00)
+
+/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/
+
+/**** Defines for the WWID field ****/
+#define MPI3_DEVICE0_WWID_INVALID                       (0xFFFFFFFFFFFFFFFF)
+
+/**** Defines for the PersistentID field ****/
+#define MPI3_DEVICE0_PERSISTENTID_INVALID               (0xFFFF)
+
+/**** Defines for the IOUnitPort field ****/
+#define MPI3_DEVICE0_IOUNITPORT_INVALID                 (0xFF)
+
+/**** Defines for the AccessStatus field ****/
+/* Generic Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_NO_ERRORS                              (0x00)
+#define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION                   (0x01)
+#define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED                        (0x02)
+#define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED                         (0x03)
+#define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED                           (0x04)
+#define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY                   (0x05)
+/* SAS Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN                            (0x10)
+#define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE                  (0x11)
+#define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE              (0x12)
+/* SATA Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN                            (0x20)
+#define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT               (0x21)
+#define MPI3_DEVICE0_ASTATUS_SIF_DIAG                               (0x22)
+#define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION                     (0x23)
+#define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER                        (0x24)
+#define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN                             (0x25)
+#define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN                            (0x26)
+#define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN                            (0x27)
+#define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION                   (0x28)
+#define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE                    (0x29)
+#define MPI3_DEVICE0_ASTATUS_SIF_MAX                                (0x2F)
+/* PCIe Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN                           (0x30)
+#define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS                  (0x31)
+#define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED                       (0x32)
+#define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED                     (0x33)
+/* NVMe Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN                           (0x40)
+#define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT                     (0x41)
+#define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED                (0x42)
+#define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED                   (0x43)
+#define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED                    (0x44)
+#define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED                  (0x45)
+#define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED                   (0x46)
+#define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED           (0x47)
+#define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT                      (0x48)
+#define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS               (0x49)
+/* Virtual Device Access Status Codes  */
+#define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN                             (0x50)
+
+/**** Defines for the Flags field ****/
+#define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE        (0x0080)
+#define MPI3_DEVICE0_FLAGS_HIDDEN                       (0x0008)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_MASK              (0x0006)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_NOT_DIR_ATTACHED  (0x0000)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED      (0x0002)
+#define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL           (0x0004)
+#define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
+
+/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ defines ****/
+
+/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/
+
+/**** Defines for the QueueDepth field ****/
+#define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE         (0x0000)
+
+
+/*****************************************************************************
+ *              Device Page 1                                                *
+ ****************************************************************************/
+typedef struct _MPI3_DEVICE1_SAS_SATA_FORMAT {
+    U32                             Reserved00;             /* 0x00 */
+} MPI3_DEVICE1_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_SAS_SATA_FORMAT,
+  Mpi3Device1SasSataFormat_t, MPI3_POINTER pMpi3Device1SasSataFormat_t;
+
+typedef struct _MPI3_DEVICE1_PCIE_FORMAT {
+    U16                             VendorID;               /* 0x00 */
+    U16                             DeviceID;               /* 0x02 */
+    U16                             SubsystemVendorID;      /* 0x04 */
+    U16                             SubsystemID;            /* 0x06 */
+    U32                             Reserved08;             /* 0x08 */
+    U8                              RevisionID;             /* 0x0C */
+    U8                              Reserved0D;             /* 0x0D */
+    U16                             PCIParameters;          /* 0x0E */
+} MPI3_DEVICE1_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_PCIE_FORMAT,
+  Mpi3Device1PcieFormat_t, MPI3_POINTER pMpi3Device1PcieFormat_t;
+
+/**** Defines for the PCIParameters field ****/
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B              (0x0)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B              (0x1)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B              (0x2)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B             (0x3)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B             (0x4)
+#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B             (0x5)
+
+/*** MaxReadRequestSize, CurrentMaxPayloadSize, and MaxPayloadSizeSupported  ***/
+/***  all use the size definitions above - shifted to the proper position    ***/
+#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK           (0x01C0)
+#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT          (6)
+#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK       (0x0038)
+#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT      (3)
+#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK       (0x0007)
+#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT      (0)
+
+typedef struct _MPI3_DEVICE1_VD_FORMAT {
+    U32                             Reserved00;             /* 0x00 */
+} MPI3_DEVICE1_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_VD_FORMAT,
+  Mpi3Device1VdFormat_t, MPI3_POINTER pMpi3Device1VdFormat_t;
+
+typedef union _MPI3_DEVICE1_DEV_SPEC_FORMAT {
+    MPI3_DEVICE1_SAS_SATA_FORMAT    SasSataFormat;
+    MPI3_DEVICE1_PCIE_FORMAT        PcieFormat;
+    MPI3_DEVICE1_VD_FORMAT          VdFormat;
+} MPI3_DEVICE1_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_DEV_SPEC_FORMAT,
+  Mpi3Device1DevSpecFormat_t, MPI3_POINTER pMpi3Device1DevSpecFormat_t;
+
+typedef struct _MPI3_DEVICE_PAGE1 {
+    MPI3_CONFIG_PAGE_HEADER         Header;                 /* 0x00 */
+    U16                             DevHandle;              /* 0x08 */
+    U16                             Reserved0A;             /* 0x0A */
+    U32                             Reserved0C[12];         /* 0x0C */
+    U8                              Reserved3C[3];          /* 0x3C */
+    U8                              DeviceForm;             /* 0x3F */
+    MPI3_DEVICE1_DEV_SPEC_FORMAT    DeviceSpecific;         /* 0x40 */
+} MPI3_DEVICE_PAGE1, MPI3_POINTER PTR_MPI3_DEVICE_PAGE1,
+  Mpi3DevicePage1_t, MPI3_POINTER pMpi3DevicePage1_t;
+
+/**** Defines for the PageVersion field ****/
+#define MPI3_DEVICE1_PAGEVERSION                            (0x00)
+
+/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/
+
+#endif  /* MPI30_CNFG_H */
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_sas.h b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h
new file mode 100644
index 000000000000..b60a5899437e
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h
@@ -0,0 +1,46 @@ 
+/*
+ *  Copyright 2016-2020 Broadcom Inc. All rights reserved.
+ *
+ *           Name: mpi30_sas.h
+ *    Description: Contains MPI Serial Attached SCSI structures and definitions
+ *  Creation Date: 12/08/2016
+ *        Version: 03.00.00
+ */
+#ifndef MPI30_SAS_H
+#define MPI30_SAS_H     1
+
+/*****************************************************************************
+ *              SAS Device Info Definitions                                  *
+ ****************************************************************************/
+#define MPI3_SAS_DEVICE_INFO_SSP_TARGET             (0x00000100)
+#define MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET        (0x00000080)
+#define MPI3_SAS_DEVICE_INFO_SMP_TARGET             (0x00000040)
+#define MPI3_SAS_DEVICE_INFO_SSP_INITIATOR          (0x00000020)
+#define MPI3_SAS_DEVICE_INFO_STP_INITIATOR          (0x00000010)
+#define MPI3_SAS_DEVICE_INFO_SMP_INITIATOR          (0x00000008)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK       (0x00000007)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE  (0x00000000)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE (0x00000001)
+#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER   (0x00000002)
+
+/*****************************************************************************
+ *              SMP Passthrough Request Message                              *
+ ****************************************************************************/
+typedef struct _MPI3_SMP_PASSTHROUGH_REQUEST {
+    U16                     HostTag;                        /* 0x00 */
+    U8                      IOCUseOnly02;                   /* 0x02 */
+    U8                      Function;                       /* 0x03 */
+    U16                     IOCUseOnly04;                   /* 0x04 */
+    U8                      IOCUseOnly06;                   /* 0x06 */
+    U8                      MsgFlags;                       /* 0x07 */
+    U16                     ChangeCount;                    /* 0x08 */
+    U8                      Reserved0A;                     /* 0x0A */
+    U8                      IOUnitPort;                     /* 0x0B */
+    U32                     Reserved0C[3];                  /* 0x0C */
+    U64                     SASAddress;                     /* 0x18 */
+    MPI3_SGE_SIMPLE         RequestSGE;                     /* 0x20 */
+    MPI3_SGE_SIMPLE         ResponseSGE;                    /* 0x30 */
+} MPI3_SMP_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_SMP_PASSTHROUGH_REQUEST,
+  Mpi3SmpPassthroughRequest_t, MPI3_POINTER pMpi3SmpPassthroughRequest_t;
+
+#endif  /* MPI30_SAS_H */
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 0fa38036dcf3..1f70a67d7868 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -134,6 +134,10 @@  extern struct list_head mrioc_list;
 #define MPI3MR_RSP_IO_QUEUED_ON_IOC \
 			MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC
 
+#define MPI3MR_DEFAULT_MDTS	(128 * 1024)
+/* Command retry count definitions */
+#define MPI3MR_DEV_RMHS_RETRY_COUNT 3
+
 /* SGE Flag definition */
 #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
 	(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -313,6 +317,126 @@  struct mpi3mr_intr_info {
 	char name[MPI3MR_NAME_LENGTH];
 };
 
+/**
+ * struct tgt_dev_sas_sata - SAS/SATA device specific
+ * information cached from firmware given data
+ *
+ * @sas_address: World wide unique SAS address
+ * @dev_info: Device information bits
+ */
+struct tgt_dev_sas_sata {
+	u64 sas_address;
+	u16 dev_info;
+};
+
+/**
+ * struct tgt_dev_pcie - PCIe device specific information cached
+ * from firmware given data
+ *
+ * @mdts: Maximum data transfer size
+ * @capb: Device capabilities
+ * @pgsz: Device page size
+ * @abort_to: Timeout for abort TM
+ * @reset_to: Timeout for Target/LUN reset TM
+ */
+struct tgt_dev_pcie {
+	u32 mdts;
+	u16 capb;
+	u8 pgsz;
+	u8 abort_to;
+	u8 reset_to;
+};
+
+/**
+ * struct tgt_dev_volume - virtual device specific information
+ * cached from firmware given data
+ *
+ * @state: State of the VD
+ */
+struct tgt_dev_volume {
+	u8 state;
+};
+
+/**
+ * union _form_spec_inf - union of device specific information
+ */
+union _form_spec_inf {
+	struct tgt_dev_sas_sata sas_sata_inf;
+	struct tgt_dev_pcie pcie_inf;
+	struct tgt_dev_volume vol_inf;
+};
+
+
+
+/**
+ * struct mpi3mr_tgt_dev - target device data structure
+ *
+ * @list: List pointer
+ * @starget: Scsi_target pointer
+ * @dev_handle: FW device handle
+ * @parent_handle: FW parent device handle
+ * @slot: Slot number
+ * @encl_handle: FW enclosure handle
+ * @perst_id: FW assigned Persistent ID
+ * @dev_type: SAS/SATA/PCIE device type
+ * @is_hidden: Should be exposed to upper layers or not
+ * @host_exposed: Already exposed to host or not
+ * @q_depth: Device specific Queue Depth
+ * @wwid: World wide ID
+ * @dev_spec: Device type specific information
+ * @ref_count: Reference count
+ */
+struct mpi3mr_tgt_dev {
+	struct list_head list;
+	struct scsi_target *starget;
+	u16 dev_handle;
+	u16 parent_handle;
+	u16 slot;
+	u16 encl_handle;
+	u16 perst_id;
+	u8 dev_type;
+	u8 is_hidden;
+	u8 host_exposed;
+	u16 q_depth;
+	u64 wwid;
+	union _form_spec_inf dev_spec;
+	struct kref ref_count;
+};
+
+/**
+ * mpi3mr_tgtdev_get - k reference incrementor
+ * @s: Target device reference
+ *
+ * Increment target device reference count.
+ */
+static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s)
+{
+	kref_get(&s->ref_count);
+}
+
+/**
+ * mpi3mr_free_tgtdev - target device memory dealloctor
+ * @r: k reference pointer of the target device
+ *
+ * Free target device memory when no reference.
+ */
+static inline void mpi3mr_free_tgtdev(struct kref *r)
+{
+	kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count));
+}
+
+/**
+ * mpi3mr_tgtdev_put - k reference decrementor
+ * @s: Target device reference
+ *
+ * Decrement target device reference count.
+ */
+static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s)
+{
+	kref_put(&s->ref_count, mpi3mr_free_tgtdev);
+}
+
+
 /**
  * struct mpi3mr_stgt_priv_data - SCSI target private structure
  *
@@ -362,6 +486,7 @@  typedef void (*DRV_CMD_CALLBACK)(struct mpi3mr_ioc *mrioc,
  * @done: Completeor for wakeup
  * @reply: Firmware reply for internal commands
  * @sensebuf: Sensebuf for SCSI IO commands
+ * @iou_rc: IO Unit control reason code
  * @state: Command State
  * @dev_handle: Firmware handle for device specific commands
  * @ioc_status: IOC status from the firmware
@@ -376,6 +501,7 @@  struct mpi3mr_drv_cmd {
 	struct completion done;
 	void *reply;
 	u8 *sensebuf;
+	u8 iou_rc;
 	u16 state;
 	u16 dev_handle;
 	u16 ioc_status;
@@ -480,6 +606,11 @@  struct scmd_priv {
  * @sense_buf_q_dma: Sense buffer queue DMA address
  * @sbq_lock: Sense buffer queue lock
  * @sbq_host_index: Sense buffer queuehost index
+ * @event_masks: Event mask bitmap
+ * @fwevt_worker_name: Firmware event worker thread name
+ * @fwevt_worker_thread: Firmware event worker thread
+ * @fwevt_lock: Firmware event lock
+ * @fwevt_list: Firmware event list
  * @watchdog_work_q_name: Fault watchdog worker thread name
  * @watchdog_work_q: Fault watchdog worker thread
  * @watchdog_work: Fault watchdog work
@@ -495,6 +626,12 @@  struct scmd_priv {
  * @chain_bitmap_sz: Chain buffer allocator bitmap size
  * @chain_bitmap: Chain buffer allocator bitmap
  * @chain_buf_lock: Chain buffer list lock
+ * @dev_rmhs_cmds: Command tracker for device removal commands
+ * @devrem_bitmap_sz: Device removal bitmap size
+ * @devrem_bitmap: Device removal bitmap
+ * @dev_handle_bitmap_sz: Device handle bitmap size
+ * @removepend_bitmap: Remove pending bitmap
+ * @delayed_rmhs_list: Delayed device removal list
  * @reset_in_progress: Reset in progress flag
  * @unrecoverable: Controller unrecoverable flag
  * @diagsave_timeout: Diagnostic information save timeout
@@ -578,6 +715,12 @@  struct mpi3mr_ioc {
 	dma_addr_t sense_buf_q_dma;
 	spinlock_t sbq_lock;
 	u32 sbq_host_index;
+	u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
+
+	char fwevt_worker_name[MPI3MR_NAME_LENGTH];
+	struct workqueue_struct	*fwevt_worker_thread;
+	spinlock_t fwevt_lock;
+	struct list_head fwevt_list;
 
 	char watchdog_work_q_name[20];
 	struct workqueue_struct *watchdog_work_q;
@@ -590,6 +733,8 @@  struct mpi3mr_ioc {
 	u8 stop_drv_processing;
 
 	u16 max_host_ios;
+	spinlock_t tgtdev_lock;
+	struct list_head tgtdev_list;
 
 	u32 chain_buf_count;
 	struct dma_pool *chain_buf_pool;
@@ -598,6 +743,13 @@  struct mpi3mr_ioc {
 	void *chain_bitmap;
 	spinlock_t chain_buf_lock;
 
+	struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD];
+	u16 devrem_bitmap_sz;
+	void *devrem_bitmap;
+	u16 dev_handle_bitmap_sz;
+	void *removepend_bitmap;
+	struct list_head delayed_rmhs_list;
+
 	u8 reset_in_progress;
 	u8 unrecoverable;
 
@@ -610,6 +762,45 @@  struct mpi3mr_ioc {
 	u16 op_reply_q_offset;
 };
 
+/**
+ * struct mpi3mr_fwevt - Firmware event structure.
+ *
+ * @list: list head
+ * @work: Work structure
+ * @mrioc: Adapter instance reference
+ * @event_id: MPI3 firmware event ID
+ * @send_ack: Event acknowledgment required or not
+ * @process_evt: Bottomhalf processing required or not
+ * @evt_ctx: Event context to send in Ack
+ * @ref_count: kref count
+ * @event_data: Actual MPI3 event data
+ */
+struct mpi3mr_fwevt {
+	struct list_head list;
+	struct work_struct work;
+	struct mpi3mr_ioc *mrioc;
+	u16 event_id;
+	bool send_ack;
+	bool process_evt;
+	u32 evt_ctx;
+	struct kref ref_count;
+	char event_data[0] __aligned(4);
+};
+
+
+/**
+ * struct delayed_dev_rmhs_node - Delayed device removal node
+ *
+ * @list: list head
+ * @handle: Device handle
+ * @iou_rc: IO Unit Control Reason Code
+ */
+struct delayed_dev_rmhs_node {
+	struct list_head list;
+	u16 handle;
+	u8 iou_rc;
+};
+
 int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc);
 void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc);
 int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc);
@@ -629,6 +820,8 @@  void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc,
 void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc,
 				     u64 sense_buf_dma);
 
+void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
+			     Mpi3EventNotificationReply_t *event_reply);
 void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc,
 				  Mpi3DefaultReplyDescriptor_t *reply_desc,
 				  u64 *reply_dma, u16 qidx);
@@ -641,5 +834,7 @@  void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
 void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
 
 enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc);
+int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
+			  u32 event_ctx);
 
 #endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 4f1524dcad4d..c3933c9b73fc 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -160,6 +160,7 @@  static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc,
 	    (Mpi3EventNotificationReply_t *)def_reply;
 
 	mrioc->change_count = le16_to_cpu(event_reply->IOCChangeCount);
+	mpi3mr_os_handle_events(mrioc, event_reply);
 }
 
 static struct mpi3mr_drv_cmd *
@@ -2137,6 +2138,162 @@  static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc)
 	return retval;
 }
 
+/**
+ * mpi3mr_unmask_events - Unmask events in event mask bitmap
+ * @mrioc: Adapter instance reference
+ * @event: MPI event ID
+ *
+ * Un mask the specific event by resetting the event_mask
+ * bitmap.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event)
+{
+	u32 desired_event;
+	u8 word;
+
+	if (event >= 128)
+		return;
+
+	desired_event = (1 << (event % 32));
+	word = event / 32;
+
+	mrioc->event_masks[word] &= ~desired_event;
+}
+
+/**
+ * mpi3mr_issue_event_notification - Send event notification
+ * @mrioc: Adapter instance reference
+ *
+ * Issue event notification MPI request through admin queue and
+ * wait for the completion of it or time out.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc)
+{
+	Mpi3EventNotificationRequest_t evtnotify_req;
+	int retval = 0;
+	u8 i;
+
+	memset(&evtnotify_req, 0, sizeof(evtnotify_req));
+	mutex_lock(&mrioc->init_cmds.mutex);
+	if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+		retval = -1;
+		ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n");
+		mutex_unlock(&mrioc->init_cmds.mutex);
+		goto out;
+	}
+	mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+	mrioc->init_cmds.is_waiting = 1;
+	mrioc->init_cmds.callback = NULL;
+	evtnotify_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+	evtnotify_req.Function = MPI3_FUNCTION_EVENT_NOTIFICATION;
+	for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		evtnotify_req.EventMasks[i] =
+		    cpu_to_le32(mrioc->event_masks[i]);
+	init_completion(&mrioc->init_cmds.done);
+	retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req,
+	    sizeof(evtnotify_req), 1);
+	if (retval) {
+		ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n");
+		goto out_unlock;
+	}
+	wait_for_completion_timeout(&mrioc->init_cmds.done,
+	    (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+	if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+		ioc_err(mrioc, "Issue EvtNotify: command timed out\n");
+		mpi3mr_set_diagsave(mrioc);
+		mpi3mr_issue_reset(mrioc,
+		    MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
+		    MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT);
+		mrioc->unrecoverable = 1;
+		retval = -1;
+		goto out_unlock;
+	}
+	if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+	    != MPI3_IOCSTATUS_SUCCESS) {
+		ioc_err(mrioc,
+		    "Issue EvtNotify: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n",
+		    (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+		    mrioc->init_cmds.ioc_loginfo);
+		retval = -1;
+		goto out_unlock;
+	}
+
+out_unlock:
+	mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+	mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+	return retval;
+}
+
+/**
+ * mpi3mr_send_event_ack - Send event acknowledgment
+ * @event: MPI3 event ID
+ * @event_ctx: Event context
+ *
+ * Send event acknowledgment through admin queue and wait for
+ * it to complete.
+ *
+ * Return: 0 on success, non-zero on failures.
+ */
+int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
+	u32 event_ctx)
+{
+	Mpi3EventAckRequest_t evtack_req;
+	int retval = 0;
+
+	memset(&evtack_req, 0, sizeof(evtack_req));
+	mutex_lock(&mrioc->init_cmds.mutex);
+	if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) {
+		retval = -1;
+		ioc_err(mrioc, "Send EvtAck: Init command is in use\n");
+		mutex_unlock(&mrioc->init_cmds.mutex);
+		goto out;
+	}
+	mrioc->init_cmds.state = MPI3MR_CMD_PENDING;
+	mrioc->init_cmds.is_waiting = 1;
+	mrioc->init_cmds.callback = NULL;
+	evtack_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS);
+	evtack_req.Function = MPI3_FUNCTION_EVENT_ACK;
+	evtack_req.Event = event;
+	evtack_req.EventContext = cpu_to_le32(event_ctx);
+
+	init_completion(&mrioc->init_cmds.done);
+	retval = mpi3mr_admin_request_post(mrioc, &evtack_req,
+	    sizeof(evtack_req), 1);
+	if (retval) {
+		ioc_err(mrioc, "Send EvtAck: Admin Post failed\n");
+		goto out_unlock;
+	}
+	wait_for_completion_timeout(&mrioc->init_cmds.done,
+	    (MPI3MR_INTADMCMD_TIMEOUT * HZ));
+	if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) {
+		ioc_err(mrioc, "Issue EvtNotify: command timed out\n");
+		mpi3mr_soft_reset_handler(mrioc,
+		    MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1);
+		retval = -1;
+		goto out_unlock;
+	}
+	if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK)
+	    != MPI3_IOCSTATUS_SUCCESS) {
+		ioc_err(mrioc,
+		    "Send EvtAck: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n",
+		    (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK),
+		    mrioc->init_cmds.ioc_loginfo);
+		retval = -1;
+		goto out_unlock;
+	}
+
+out_unlock:
+	mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
+	mutex_unlock(&mrioc->init_cmds.mutex);
+out:
+	return retval;
+}
+
 
 /**
  * mpi3mr_alloc_chain_bufs - Allocate chain buffers
@@ -2418,7 +2575,7 @@  int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
 	enum mpi3mr_iocstate ioc_state;
 	u64 base_info;
 	u32 timeout;
-	u32 ioc_status, ioc_config;
+	u32 ioc_status, ioc_config, i;
 	Mpi3IOCFactsData_t facts_data;
 
 	mrioc->change_count = 0;
@@ -2568,6 +2725,24 @@  int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
 		goto out_failed;
 	}
 
+	for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
+		mrioc->event_masks[i] = -1;
+
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY);
+	mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
+
+	retval = mpi3mr_issue_event_notification(mrioc);
+	if (retval) {
+		ioc_err(mrioc, "Failed to issue event notification %d\n",
+		    retval);
+		goto out_failed;
+	}
+
 	return retval;
 
 out_failed:
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 7b0d52481929..e0ca657bfff5 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -125,6 +125,1284 @@  static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc,
 	}
 }
 
+static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
+	struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc);
+static void mpi3mr_fwevt_worker(struct work_struct *work);
+
+
+/**
+ * mpi3mr_fwevt_free - firmware event memory dealloctor
+ * @r: k reference pointer of the firmware event
+ *
+ * Free firmware event memory when no reference.
+ */
+static void mpi3mr_fwevt_free(struct kref *r)
+{
+	kfree(container_of(r, struct mpi3mr_fwevt, ref_count));
+}
+
+/**
+ * mpi3mr_fwevt_get - k reference incrementor
+ * @fwevt: Firmware event reference
+ *
+ * Increment firmware event reference count.
+ */
+static void mpi3mr_fwevt_get(struct mpi3mr_fwevt *fwevt)
+{
+	kref_get(&fwevt->ref_count);
+}
+
+/**
+ * mpi3mr_fwevt_put - k reference decrementor
+ * @fwevt: Firmware event reference
+ *
+ * Decrement firmware event reference count.
+ */
+static void mpi3mr_fwevt_put(struct mpi3mr_fwevt *fwevt)
+{
+	kref_put(&fwevt->ref_count, mpi3mr_fwevt_free);
+}
+
+/**
+ * mpi3mr_alloc_fwevt - Allocate firmware event
+ * @len: Length of firmware event data to allocate
+ *
+ * Allocate firmware event with required length and initialize
+ * the reference counter.
+ *
+ * Return: firmware event reference.
+ */
+static struct mpi3mr_fwevt *mpi3mr_alloc_fwevt(int len)
+{
+	struct mpi3mr_fwevt *fwevt;
+
+	fwevt = kzalloc(sizeof(*fwevt) + len, GFP_ATOMIC);
+	if (!fwevt)
+		return NULL;
+
+	kref_init(&fwevt->ref_count);
+	return fwevt;
+}
+
+/**
+ * mpi3mr_fwevt_add_to_list - Add firmware event to the list
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Add the given firmware event to the firmware event list.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_add_to_list(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_fwevt *fwevt)
+{
+	unsigned long flags;
+
+	if (mrioc->fwevt_worker_thread == NULL)
+		return;
+
+	spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+	/* get fwevt reference count while adding it to fwevt_list */
+	mpi3mr_fwevt_get(fwevt);
+	INIT_LIST_HEAD(&fwevt->list);
+	list_add_tail(&fwevt->list, &mrioc->fwevt_list);
+	INIT_WORK(&fwevt->work, mpi3mr_fwevt_worker);
+	/* get fwevt reference count while enqueueing it to worker queue */
+	mpi3mr_fwevt_get(fwevt);
+	queue_work(mrioc->fwevt_worker_thread, &fwevt->work);
+	spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+}
+
+/**
+ * mpi3mr_fwevt_del_from_list - Delete firmware event from list
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Delete the given firmware event from the firmware event list.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_del_from_list(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_fwevt *fwevt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+	if (!list_empty(&fwevt->list)) {
+		list_del_init(&fwevt->list);
+		/*
+		 * Put fwevt reference count after
+		 * removing it from fwevt_list
+		 */
+		mpi3mr_fwevt_put(fwevt);
+	}
+	spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+}
+
+/**
+ * mpi3mr_dequeue_fwevt - Dequeue firmware event from the list
+ * @mrioc: Adapter instance reference
+ *
+ * Dequeue a firmware event from the firmware event list.
+ *
+ * Return: firmware event.
+ */
+static struct mpi3mr_fwevt *mpi3mr_dequeue_fwevt(
+	struct mpi3mr_ioc *mrioc)
+{
+	unsigned long flags;
+	struct mpi3mr_fwevt *fwevt = NULL;
+
+	spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+	if (!list_empty(&mrioc->fwevt_list)) {
+		fwevt = list_first_entry(&mrioc->fwevt_list,
+		    struct mpi3mr_fwevt, list);
+		list_del_init(&fwevt->list);
+		/*
+		 * Put fwevt reference count after
+		 * removing it from fwevt_list
+		 */
+		mpi3mr_fwevt_put(fwevt);
+	}
+	spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+
+	return fwevt;
+}
+
+/**
+ * mpi3mr_cleanup_fwevt_list - Cleanup firmware event list
+ * @mrioc: Adapter instance reference
+ *
+ * Flush all pending firmware events from the firmware event
+ * list.
+ *
+ * Return: Nothing.
+ */
+void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc)
+{
+	struct mpi3mr_fwevt *fwevt = NULL;
+
+	if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) ||
+	    !mrioc->fwevt_worker_thread || in_interrupt())
+		return;
+
+	while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) ||
+	    (fwevt = mrioc->current_event)) {
+		/*
+		 * Wait on the fwevt to complete. If this returns 1, then
+		 * the event was never executed, and we need a put for the
+		 * reference the work had on the fwevt.
+		 *
+		 * If it did execute, we wait for it to finish, and the put will
+		 * happen from mpi3mr_process_fwevt()
+		 */
+		if (cancel_work_sync(&fwevt->work)) {
+			/*
+			 * Put fwevt reference count after
+			 * dequeuing it from worker queue
+			 */
+			mpi3mr_fwevt_put(fwevt);
+			/*
+			 * Put fwevt reference count to neutralize
+			 * kref_init increment
+			 */
+			mpi3mr_fwevt_put(fwevt);
+		}
+	}
+}
+
+/**
+ * mpi3mr_alloc_tgtdev - target device allocator
+ *
+ * Allocate target device instance and initialize the reference
+ * count
+ *
+ * Return: target device instance.
+ */
+static struct mpi3mr_tgt_dev *mpi3mr_alloc_tgtdev(void)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+
+	tgtdev = kzalloc(sizeof(*tgtdev), GFP_ATOMIC);
+	if (!tgtdev)
+		return NULL;
+	kref_init(&tgtdev->ref_count);
+	return tgtdev;
+}
+
+/**
+ * mpi3mr_tgtdev_add_to_list -Add tgtdevice to the list
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device
+ *
+ * Add the target device to the target device list
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_tgtdev_add_to_list(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_tgt_dev *tgtdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	mpi3mr_tgtdev_get(tgtdev);
+	INIT_LIST_HEAD(&tgtdev->list);
+	list_add_tail(&tgtdev->list, &mrioc->tgtdev_list);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+}
+
+/**
+ * mpi3mr_tgtdev_del_from_list -Delete tgtdevice from the list
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device
+ *
+ * Remove the target device from the target device list
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_tgtdev_del_from_list(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_tgt_dev *tgtdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	if (!list_empty(&tgtdev->list)) {
+		list_del_init(&tgtdev->list);
+		mpi3mr_tgtdev_put(tgtdev);
+	}
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+}
+
+/**
+ * __mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ *
+ * Accessor to retrieve target device from the device handle.
+ * Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev  *__mpi3mr_get_tgtdev_by_handle(
+	struct mpi3mr_ioc *mrioc, u16 handle)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+
+	assert_spin_locked(&mrioc->tgtdev_lock);
+	list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
+		if (tgtdev->dev_handle == handle)
+			goto found_tgtdev;
+	return NULL;
+
+found_tgtdev:
+	mpi3mr_tgtdev_get(tgtdev);
+	return tgtdev;
+}
+
+/**
+ * mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ *
+ * Accessor to retrieve target device from the device handle.
+ * Lock version
+ *
+ * Return: Target device reference.
+ */
+struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle(
+	struct mpi3mr_ioc *mrioc, u16 handle)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgtdev = __mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+	return tgtdev;
+}
+
+/**
+ * __mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persist ID
+ * @mrioc: Adapter instance reference
+ * @persist_id: Persistent ID
+ *
+ * Accessor to retrieve target device from the Persistent ID.
+ * Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev  *__mpi3mr_get_tgtdev_by_perst_id(
+	struct mpi3mr_ioc *mrioc, u16 persist_id)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+
+	assert_spin_locked(&mrioc->tgtdev_lock);
+	list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list)
+		if (tgtdev->perst_id == persist_id)
+			goto found_tgtdev;
+	return NULL;
+
+found_tgtdev:
+	mpi3mr_tgtdev_get(tgtdev);
+	return tgtdev;
+}
+
+/**
+ * mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persistent ID
+ * @mrioc: Adapter instance reference
+ * @persist_id: Persistent ID
+ *
+ * Accessor to retrieve target device from the Persistent ID.
+ * Lock version
+ *
+ * Return: Target device reference.
+ */
+struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id(
+	struct mpi3mr_ioc *mrioc, u16 persist_id)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgtdev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, persist_id);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+	return tgtdev;
+}
+
+
+/**
+ * __mpi3mr_get_tgtdev_from_tgtpriv -Get tgtdev from tgt private
+ * @mrioc: Adapter instance reference
+ * @tgt_priv: Target private data
+ *
+ * Accessor to return target device from the target private
+ * data. Non Lock version
+ *
+ * Return: Target device reference.
+ */
+static struct mpi3mr_tgt_dev  *__mpi3mr_get_tgtdev_from_tgtpriv(
+	struct mpi3mr_ioc *mrioc, struct mpi3mr_stgt_priv_data *tgt_priv)
+{
+	struct mpi3mr_tgt_dev *tgtdev;
+
+	assert_spin_locked(&mrioc->tgtdev_lock);
+	tgtdev = tgt_priv->tgt_dev;
+	if (tgtdev)
+		mpi3mr_tgtdev_get(tgtdev);
+	return tgtdev;
+}
+
+/**
+ * mpi3mr_remove_tgtdev_from_host - Remove dev from upper layers
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device structure
+ *
+ * Checks whether the device is exposed to upper layers and if it
+ * is then remove the device from upper layers by calling
+ * scsi_remove_target().
+ *
+ * Return: 0 on success, non zero on failure.
+ */
+static void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_tgt_dev *tgtdev)
+{
+	struct mpi3mr_stgt_priv_data *tgt_priv;
+
+
+	ioc_info(mrioc, "%s :Removing handle(0x%04x), wwid(0x%016llx)\n",
+	    __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid);
+	if (tgtdev->starget && tgtdev->starget->hostdata) {
+		tgt_priv = tgtdev->starget->hostdata;
+		tgt_priv->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+	}
+
+	if (tgtdev->starget) {
+		scsi_remove_target(&tgtdev->starget->dev);
+		tgtdev->host_exposed = 0;
+	}
+	ioc_info(mrioc, "%s :Removed handle(0x%04x), wwid(0x%016llx)\n",
+	    __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid);
+}
+
+
+/**
+ * mpi3mr_report_tgtdev_to_host - Expose device to upper layers
+ * @mrioc: Adapter instance reference
+ * @perst_id: Persistent ID of the device
+ *
+ * Checks whether the device can be exposed to upper layers and
+ * if it is not then expose the device to upper layers by
+ * calling scsi_scan_target().
+ *
+ * Return: 0 on success, non zero on failure.
+ */
+static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc,
+	u16 perst_id)
+{
+	int retval = 0;
+	struct mpi3mr_tgt_dev *tgtdev;
+
+	tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id);
+	if (!tgtdev) {
+		retval = -1;
+		goto out;
+	}
+	if (tgtdev->is_hidden) {
+		retval = -1;
+		goto out;
+	}
+	if (!tgtdev->host_exposed && !mrioc->reset_in_progress) {
+		tgtdev->host_exposed = 1;
+		scsi_scan_target(&mrioc->shost->shost_gendev, 0,
+		    tgtdev->perst_id,
+		    SCAN_WILD_CARD, SCSI_SCAN_INITIAL);
+		if (!tgtdev->starget)
+			tgtdev->host_exposed = 0;
+	}
+out:
+	if (tgtdev)
+		mpi3mr_tgtdev_put(tgtdev);
+
+	return retval;
+}
+
+/**
+ * mpi3mr_rfresh_tgtdevs - Refresh target device exposure
+ * @mrioc: Adapter instance reference
+ *
+ * This is executed post controller reset to identify any
+ * missing devices during reset and remove from the upper layers
+ * or expose any newly detected device to the upper layers.
+ *
+ * Return: Nothing.
+ */
+
+void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc)
+{
+	struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
+
+	list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list,
+	    list) {
+		if ((tgtdev->dev_handle == MPI3MR_INVALID_DEV_HANDLE) &&
+		    tgtdev->host_exposed) {
+			mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+			mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+			mpi3mr_tgtdev_put(tgtdev);
+		}
+	}
+
+	tgtdev = NULL;
+	list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) {
+		if ((tgtdev->dev_handle != MPI3MR_INVALID_DEV_HANDLE) &&
+		    !tgtdev->is_hidden && !tgtdev->host_exposed)
+			mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id);
+	}
+}
+
+/**
+ * mpi3mr_update_tgtdev - DevStatusChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @tgtdev: Target device internal structure
+ * @dev_pg0: New device page0
+ *
+ * Update the information from the device page0 into the driver
+ * cached target device structure.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_tgt_dev *tgtdev, Mpi3DevicePage0_t *dev_pg0)
+{
+	u16 flags = 0;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+
+	tgtdev->perst_id = le16_to_cpu(dev_pg0->PersistentID);
+	tgtdev->dev_handle = le16_to_cpu(dev_pg0->DevHandle);
+	tgtdev->dev_type = dev_pg0->DeviceForm;
+	tgtdev->encl_handle = le16_to_cpu(dev_pg0->EnclosureHandle);
+	tgtdev->parent_handle = le16_to_cpu(dev_pg0->ParentDevHandle);
+	tgtdev->slot = le16_to_cpu(dev_pg0->Slot);
+	tgtdev->q_depth = le16_to_cpu(dev_pg0->QueueDepth);
+	tgtdev->wwid = le64_to_cpu(dev_pg0->WWID);
+
+	flags = le16_to_cpu(dev_pg0->Flags);
+	tgtdev->is_hidden = (flags & MPI3_DEVICE0_FLAGS_HIDDEN);
+
+	if (tgtdev->starget && tgtdev->starget->hostdata) {
+		scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+		    tgtdev->starget->hostdata;
+		scsi_tgt_priv_data->perst_id = tgtdev->perst_id;
+		scsi_tgt_priv_data->dev_handle = tgtdev->dev_handle;
+		scsi_tgt_priv_data->dev_type = tgtdev->dev_type;
+	}
+
+	switch (tgtdev->dev_type) {
+	case MPI3_DEVICE_DEVFORM_SAS_SATA:
+	{
+		Mpi3Device0SasSataFormat_t *sasinf =
+		    &dev_pg0->DeviceSpecific.SasSataFormat;
+		u16 dev_info = le16_to_cpu(sasinf->DeviceInfo);
+
+		tgtdev->dev_spec.sas_sata_inf.dev_info = dev_info;
+		tgtdev->dev_spec.sas_sata_inf.sas_address =
+		    le64_to_cpu(sasinf->SASAddress);
+		if ((dev_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) !=
+		    MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE)
+			tgtdev->is_hidden = 1;
+		else if (!(dev_info & (MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET |
+		    MPI3_SAS_DEVICE_INFO_SSP_TARGET)))
+			tgtdev->is_hidden = 1;
+		break;
+	}
+	case MPI3_DEVICE_DEVFORM_VD:
+	{
+		Mpi3Device0VdFormat_t *vdinf =
+		    &dev_pg0->DeviceSpecific.VdFormat;
+
+		tgtdev->dev_spec.vol_inf.state = vdinf->VdState;
+		if (vdinf->VdState == MPI3_DEVICE0_VD_STATE_OFFLINE)
+			tgtdev->is_hidden = 1;
+		break;
+	}
+	default:
+		break;
+	}
+}
+
+/**
+ * mpi3mr_devstatuschg_evt_bh - DevStatusChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @dev_pg0: New device page0
+ *
+ * Process Device Status Change event and based on device's new
+ * information, either expose the device to the upper layers, or
+ * remove the device from upper layers.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_devstatuschg_evt_bh(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_fwevt *fwevt)
+{
+	u16 dev_handle = 0;
+	u8 uhide = 0, delete = 0, cleanup = 0;
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+	Mpi3EventDataDeviceStatusChange_t *evtdata =
+	    (Mpi3EventDataDeviceStatusChange_t *)fwevt->event_data;
+
+
+	dev_handle = le16_to_cpu(evtdata->DevHandle);
+	ioc_info(mrioc,
+	    "%s :device status change: handle(0x%04x): reason code(0x%x)\n",
+	    __func__, dev_handle, evtdata->ReasonCode);
+	switch (evtdata->ReasonCode) {
+	case MPI3_EVENT_DEV_STAT_RC_HIDDEN:
+		delete = 1;
+		break;
+	case MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN:
+		uhide = 1;
+		break;
+	case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING:
+		delete = 1;
+		cleanup = 1;
+		break;
+	default:
+		ioc_info(mrioc, "%s :Unhandled reason code(0x%x)\n", __func__,
+		    evtdata->ReasonCode);
+		break;
+	}
+
+	tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+	if (!tgtdev)
+		goto out;
+	if (uhide) {
+		tgtdev->is_hidden = 0;
+		if (!tgtdev->host_exposed)
+			mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id);
+	}
+	if (tgtdev->starget && tgtdev->starget->hostdata) {
+		scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+		    tgtdev->starget->hostdata;
+		if (delete)
+			mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+	}
+	if (cleanup) {
+		mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+		mpi3mr_tgtdev_put(tgtdev);
+	}
+
+out:
+	if (tgtdev)
+		mpi3mr_tgtdev_put(tgtdev);
+
+}
+
+/**
+ * mpi3mr_devinfochg_evt_bh - DeviceInfoChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @dev_pg0: New device page0
+ *
+ * Process Device Info Change event and based on device's new
+ * information, either expose the device to the upper layers, or
+ * remove the device from upper layers or update the details of
+ * the device.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc,
+	Mpi3DevicePage0_t *dev_pg0)
+{
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+	u16 dev_handle = 0, perst_id = 0;
+
+	perst_id = le16_to_cpu(dev_pg0->PersistentID);
+	dev_handle = le16_to_cpu(dev_pg0->DevHandle);
+	ioc_info(mrioc,
+	    "%s :Device info change: handle(0x%04x): persist_id(0x%x)\n",
+	    __func__, dev_handle, perst_id);
+	tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+	if (!tgtdev)
+		goto out;
+	mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+	if (!tgtdev->is_hidden && !tgtdev->host_exposed)
+		mpi3mr_report_tgtdev_to_host(mrioc, perst_id);
+	if (tgtdev->is_hidden && tgtdev->host_exposed)
+		mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+out:
+	if (tgtdev)
+		mpi3mr_tgtdev_put(tgtdev);
+
+}
+
+/**
+ * mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Prints information about the SAS topology change event and
+ * for "not responding" event code, removes the device from the
+ * upper layers.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_fwevt *fwevt)
+{
+	Mpi3EventDataSasTopologyChangeList_t *event_data =
+	    (Mpi3EventDataSasTopologyChangeList_t *)fwevt->event_data;
+	int i;
+	u16 handle;
+	u8 reason_code;
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+
+	for (i = 0; i < event_data->NumEntries; i++) {
+		handle = le16_to_cpu(event_data->PhyEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+		if (!tgtdev)
+			continue;
+
+		reason_code = event_data->PhyEntry[i].Status &
+		    MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+
+		switch (reason_code) {
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+			if (tgtdev->host_exposed)
+				mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+			mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+			mpi3mr_tgtdev_put(tgtdev);
+			break;
+		default:
+			break;
+		}
+		if (tgtdev)
+			mpi3mr_tgtdev_put(tgtdev);
+	}
+}
+
+/**
+ * mpi3mr_fwevt_bh - Firmware event bottomhalf handler
+ * @mrioc: Adapter instance reference
+ * @fwevt: Firmware event reference
+ *
+ * Identifies the firmware event and calls corresponding bottomg
+ * half handler and sends event acknowledgment if required.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_fwevt *fwevt)
+{
+	mrioc->current_event = fwevt;
+	mpi3mr_fwevt_del_from_list(mrioc, fwevt);
+
+	if (mrioc->stop_drv_processing)
+		goto out;
+
+	if (!fwevt->process_evt)
+		goto evt_ack;
+
+	switch (fwevt->event_id) {
+	case MPI3_EVENT_DEVICE_ADDED:
+	{
+		Mpi3DevicePage0_t *dev_pg0 =
+		    (Mpi3DevicePage0_t *) fwevt->event_data;
+		mpi3mr_report_tgtdev_to_host(mrioc,
+		    le16_to_cpu(dev_pg0->PersistentID));
+		break;
+	}
+	case MPI3_EVENT_DEVICE_INFO_CHANGED:
+	{
+		mpi3mr_devinfochg_evt_bh(mrioc,
+		    (Mpi3DevicePage0_t *) fwevt->event_data);
+		break;
+	}
+	case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+	{
+		mpi3mr_devstatuschg_evt_bh(mrioc, fwevt);
+		break;
+	}
+	case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+	{
+		mpi3mr_sastopochg_evt_bh(mrioc, fwevt);
+		break;
+	}
+	default:
+		break;
+	}
+
+evt_ack:
+	if (fwevt->send_ack)
+		mpi3mr_send_event_ack(mrioc, fwevt->event_id,
+		    fwevt->evt_ctx);
+out:
+	/* Put fwevt reference count to neutralize kref_init increment */
+	mpi3mr_fwevt_put(fwevt);
+	mrioc->current_event = NULL;
+
+}
+
+/**
+ * mpi3mr_fwevt_worker - Firmware event worker
+ * @work: Work struct containing firmware event
+ *
+ * Extracts the firmware event and calls mpi3mr_fwevt_bh.
+ *
+ * Return: Nothing.
+ */
+static void mpi3mr_fwevt_worker(struct work_struct *work)
+{
+	struct mpi3mr_fwevt *fwevt = container_of(work, struct mpi3mr_fwevt,
+	    work);
+	mpi3mr_fwevt_bh(fwevt->mrioc, fwevt);
+	/*
+	 * Put fwevt reference count after
+	 * dequeuing it from worker queue
+	 */
+	mpi3mr_fwevt_put(fwevt);
+}
+
+
+/**
+ * mpi3mr_create_tgtdev - Create and add a target device
+ * @mrioc: Adapter instance reference
+ * @dev_pg0: Device Page 0 data
+ *
+ * If the device specified by the device page 0 data is not
+ * present in the driver's internal list, allocate the memory
+ * for the device, populate the data and add to the list, else
+ * update the device data.  The key is persistent ID.
+ *
+ * Return: 0 on success, -ENOMEM on memory allocation failure
+ */
+static int mpi3mr_create_tgtdev(struct mpi3mr_ioc *mrioc,
+	Mpi3DevicePage0_t *dev_pg0)
+{
+	int retval = 0;
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+	u16 perst_id = 0;
+
+	perst_id = le16_to_cpu(dev_pg0->PersistentID);
+	tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id);
+	if (tgtdev) {
+		mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+		mpi3mr_tgtdev_put(tgtdev);
+	} else {
+		tgtdev = mpi3mr_alloc_tgtdev();
+		if (!tgtdev)
+			return -ENOMEM;
+		mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0);
+		mpi3mr_tgtdev_add_to_list(mrioc, tgtdev);
+	}
+
+	return retval;
+}
+
+/**
+ * mpi3mr_flush_delayed_rmhs_list - Flush pending commands
+ * @mrioc: Adapter instance reference
+ * @cmdparam: Internal command tracker
+ *
+ * Flush pending commands in the delayed removal handshake list
+ * due to a controller reset or driver removal as a cleanup.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc)
+{
+	struct delayed_dev_rmhs_node *_rmhs_node;
+
+	while (!list_empty(&mrioc->delayed_rmhs_list)) {
+		_rmhs_node = list_entry(mrioc->delayed_rmhs_list.next,
+		    struct delayed_dev_rmhs_node, list);
+		list_del(&_rmhs_node->list);
+		kfree(_rmhs_node);
+	}
+}
+
+/**
+ * mpi3mr_dev_rmhs_complete_iou - Device removal IOUC completion
+ * @mrioc: Adapter instance reference
+ * @cmdparam: Internal command tracker
+ *
+ * Issues a target reset TM to the firmware from the device
+ * removal TM pend list or retry the removal handshake sequence
+ * based on the IOU control request IOC status.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_complete_iou(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_drv_cmd *drv_cmd)
+{
+	u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+	struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL;
+
+	ioc_info(mrioc,
+	    "%s :dev_rmhs_iouctrl_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x)\n",
+	    __func__, drv_cmd->dev_handle, drv_cmd->ioc_status,
+	    drv_cmd->ioc_loginfo);
+	if (drv_cmd->ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+		if (drv_cmd->retry_count < MPI3MR_DEV_RMHS_RETRY_COUNT) {
+			drv_cmd->retry_count++;
+			ioc_info(mrioc,
+			    "%s :dev_rmhs_iouctrl_complete: handle(0x%04x)retrying handshake retry=%d\n",
+			    __func__, drv_cmd->dev_handle,
+			    drv_cmd->retry_count);
+			mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle,
+			    drv_cmd, drv_cmd->iou_rc);
+			return;
+		}
+		ioc_err(mrioc,
+		    "%s :dev removal handshake failed after all retries: handle(0x%04x)\n",
+		    __func__, drv_cmd->dev_handle);
+	} else {
+		ioc_info(mrioc,
+		    "%s :dev removal handshake completed successfully: handle(0x%04x)\n",
+		    __func__, drv_cmd->dev_handle);
+		clear_bit(drv_cmd->dev_handle, mrioc->removepend_bitmap);
+	}
+
+	if (!list_empty(&mrioc->delayed_rmhs_list)) {
+		delayed_dev_rmhs = list_entry(mrioc->delayed_rmhs_list.next,
+		    struct delayed_dev_rmhs_node, list);
+		drv_cmd->dev_handle = delayed_dev_rmhs->handle;
+		drv_cmd->retry_count = 0;
+		drv_cmd->iou_rc = delayed_dev_rmhs->iou_rc;
+		ioc_info(mrioc,
+		    "%s :dev_rmhs_iouctrl_complete: processing delayed TM: handle(0x%04x)\n",
+		    __func__, drv_cmd->dev_handle);
+		mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, drv_cmd,
+		    drv_cmd->iou_rc);
+		list_del(&delayed_dev_rmhs->list);
+		kfree(delayed_dev_rmhs);
+		return;
+	}
+	drv_cmd->state = MPI3MR_CMD_NOTUSED;
+	drv_cmd->callback = NULL;
+	drv_cmd->retry_count = 0;
+	drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+	clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_dev_rmhs_complete_tm - Device removal TM completion
+ * @mrioc: Adapter instance reference
+ * @cmdparam: Internal command tracker
+ *
+ * Issues a target reset TM to the firmware from the device
+ * removal TM pend list or issue IO Unit control request as
+ * part of device removal or hidden acknowledgment handshake.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_complete_tm(struct mpi3mr_ioc *mrioc,
+	struct mpi3mr_drv_cmd *drv_cmd)
+{
+	Mpi3IoUnitControlRequest_t iou_ctrl;
+	u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+	Mpi3SCSITaskMgmtReply_t *tm_reply = NULL;
+	int retval;
+
+	if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID)
+		tm_reply = (Mpi3SCSITaskMgmtReply_t *)drv_cmd->reply;
+
+	if (tm_reply)
+		pr_info(IOCNAME
+		    "dev_rmhs_tr_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x), term_count(%d)\n",
+		    mrioc->name, drv_cmd->dev_handle, drv_cmd->ioc_status,
+		    drv_cmd->ioc_loginfo,
+		    le32_to_cpu(tm_reply->TerminationCount));
+
+	pr_info(IOCNAME "Issuing IOU CTL: handle(0x%04x) dev_rmhs idx(%d)\n",
+	    mrioc->name, drv_cmd->dev_handle, cmd_idx);
+
+	memset(&iou_ctrl, 0, sizeof(iou_ctrl));
+
+	drv_cmd->state = MPI3MR_CMD_PENDING;
+	drv_cmd->is_waiting = 0;
+	drv_cmd->callback = mpi3mr_dev_rmhs_complete_iou;
+	iou_ctrl.Operation = drv_cmd->iou_rc;
+	iou_ctrl.Param16[0] = cpu_to_le16(drv_cmd->dev_handle);
+	iou_ctrl.HostTag = cpu_to_le16(drv_cmd->host_tag);
+	iou_ctrl.Function = MPI3_FUNCTION_IO_UNIT_CONTROL;
+
+	retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, sizeof(iou_ctrl),
+	    1);
+	if (retval) {
+		pr_err(IOCNAME "Issue DevRmHsTMIOUCTL: Admin post failed\n",
+		    mrioc->name);
+		goto out_failed;
+	}
+
+	return;
+out_failed:
+	drv_cmd->state = MPI3MR_CMD_NOTUSED;
+	drv_cmd->callback = NULL;
+	drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+	drv_cmd->retry_count = 0;
+	clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_dev_rmhs_send_tm - Issue TM for device removal
+ * @mrioc: Adapter instance reference
+ * @handle: Device handle
+ * @cmdparam: Internal command tracker
+ * @iou_rc: IO Unit reason code
+ *
+ * Issues a target reset TM to the firmware or add it to a pend
+ * list as part of device removal or hidden acknowledgment
+ * handshake.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle,
+	struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc)
+{
+	Mpi3SCSITaskMgmtRequest_t tm_req;
+	int retval = 0;
+	u16 cmd_idx = MPI3MR_NUM_DEVRMCMD;
+	u8 retrycount = 5;
+	struct mpi3mr_drv_cmd *drv_cmd = cmdparam;
+	struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL;
+
+	if (drv_cmd)
+		goto issue_cmd;
+	do {
+		cmd_idx = find_first_zero_bit(mrioc->devrem_bitmap,
+		    MPI3MR_NUM_DEVRMCMD);
+		if (cmd_idx < MPI3MR_NUM_DEVRMCMD) {
+			if (!test_and_set_bit(cmd_idx, mrioc->devrem_bitmap))
+				break;
+			cmd_idx = MPI3MR_NUM_DEVRMCMD;
+		}
+	} while (retrycount--);
+
+	if (cmd_idx >= MPI3MR_NUM_DEVRMCMD) {
+		delayed_dev_rmhs = kzalloc(sizeof(*delayed_dev_rmhs),
+		    GFP_ATOMIC);
+		if (!delayed_dev_rmhs)
+			return;
+		INIT_LIST_HEAD(&delayed_dev_rmhs->list);
+		delayed_dev_rmhs->handle = handle;
+		delayed_dev_rmhs->iou_rc = iou_rc;
+		list_add_tail(&delayed_dev_rmhs->list,
+		    &mrioc->delayed_rmhs_list);
+		ioc_info(mrioc, "%s :DevRmHs: tr:handle(0x%04x) is postponed\n",
+		    __func__, handle);
+		return;
+	}
+	drv_cmd = &mrioc->dev_rmhs_cmds[cmd_idx];
+
+issue_cmd:
+	cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN;
+	ioc_info(mrioc,
+	    "%s :Issuing TR TM: for devhandle 0x%04x with dev_rmhs %d\n",
+	    __func__, handle, cmd_idx);
+
+	memset(&tm_req, 0, sizeof(tm_req));
+	if (drv_cmd->state & MPI3MR_CMD_PENDING) {
+		ioc_err(mrioc, "%s :Issue TM: Command is in use\n", __func__);
+		goto out;
+	}
+	drv_cmd->state = MPI3MR_CMD_PENDING;
+	drv_cmd->is_waiting = 0;
+	drv_cmd->callback = mpi3mr_dev_rmhs_complete_tm;
+	drv_cmd->dev_handle = handle;
+	drv_cmd->iou_rc = iou_rc;
+	tm_req.DevHandle = cpu_to_le16(handle);
+	tm_req.TaskType = MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+	tm_req.HostTag = cpu_to_le16(drv_cmd->host_tag);
+	tm_req.TaskHostTag = cpu_to_le16(MPI3MR_HOSTTAG_INVALID);
+	tm_req.Function = MPI3_FUNCTION_SCSI_TASK_MGMT;
+
+	set_bit(handle, mrioc->removepend_bitmap);
+	retval = mpi3mr_admin_request_post(mrioc, &tm_req, sizeof(tm_req), 1);
+	if (retval) {
+		ioc_err(mrioc, "%s :Issue DevRmHsTM: Admin Post failed\n",
+		    __func__);
+		goto out_failed;
+	}
+out:
+	return;
+out_failed:
+	drv_cmd->state = MPI3MR_CMD_NOTUSED;
+	drv_cmd->callback = NULL;
+	drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+	drv_cmd->retry_count = 0;
+	clear_bit(cmd_idx, mrioc->devrem_bitmap);
+}
+
+/**
+ * mpi3mr_sastopochg_evt_th - SASTopologyChange evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: Event data
+ *
+ * Checks for the reason code and based on that either block I/O
+ * to device, or unblock I/O to the device, or start the device
+ * removal handshake with reason as remove with the firmware for
+ * SAS/SATA devices.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_sastopochg_evt_th(struct mpi3mr_ioc *mrioc,
+	Mpi3EventNotificationReply_t *event_reply)
+{
+	Mpi3EventDataSasTopologyChangeList_t *topo_evt =
+	    (Mpi3EventDataSasTopologyChangeList_t *)event_reply->EventData;
+	int i;
+	u16 handle;
+	u8 reason_code;
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+
+	for (i = 0; i < topo_evt->NumEntries; i++) {
+		handle = le16_to_cpu(topo_evt->PhyEntry[i].AttachedDevHandle);
+		if (!handle)
+			continue;
+		reason_code = topo_evt->PhyEntry[i].Status &
+		    MPI3_EVENT_SAS_TOPO_PHY_RC_MASK;
+		scsi_tgt_priv_data =  NULL;
+		tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle);
+		if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata)
+			scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+			    tgtdev->starget->hostdata;
+		switch (reason_code) {
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING:
+			if (scsi_tgt_priv_data) {
+				scsi_tgt_priv_data->dev_removed = 1;
+				scsi_tgt_priv_data->dev_removedelay = 0;
+				atomic_set(&scsi_tgt_priv_data->block_io, 0);
+			}
+			mpi3mr_dev_rmhs_send_tm(mrioc, handle, NULL,
+			    MPI3_CTRL_OP_REMOVE_DEVICE);
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING:
+			if (scsi_tgt_priv_data) {
+				scsi_tgt_priv_data->dev_removedelay = 1;
+				atomic_inc(&scsi_tgt_priv_data->block_io);
+			}
+			break;
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING:
+			if (scsi_tgt_priv_data &&
+			    scsi_tgt_priv_data->dev_removedelay) {
+				scsi_tgt_priv_data->dev_removedelay = 0;
+				atomic_dec_if_positive
+				    (&scsi_tgt_priv_data->block_io);
+			}
+		case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED:
+		default:
+			break;
+		}
+		if (tgtdev)
+			mpi3mr_tgtdev_put(tgtdev);
+	}
+
+}
+
+/**
+ * mpi3mr_devstatuschg_evt_th - DeviceStatusChange evt tophalf
+ * @mrioc: Adapter instance reference
+ * @event_reply: Event data
+ *
+ * Checks for the reason code and based on that either block I/O
+ * to device, or unblock I/O to the device, or start the device
+ * removal handshake with reason as remove/hide acknowledgment
+ * with the firmware.
+ *
+ * Return: Nothing
+ */
+static void mpi3mr_devstatuschg_evt_th(struct mpi3mr_ioc *mrioc,
+	Mpi3EventNotificationReply_t *event_reply)
+{
+	u16 dev_handle = 0;
+	u8 ublock = 0, block = 0, hide = 0, delete = 0, remove = 0;
+	struct mpi3mr_tgt_dev *tgtdev = NULL;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL;
+	Mpi3EventDataDeviceStatusChange_t *evtdata =
+	    (Mpi3EventDataDeviceStatusChange_t *) event_reply->EventData;
+
+	if (mrioc->stop_drv_processing)
+		goto out;
+
+	dev_handle = le16_to_cpu(evtdata->DevHandle);
+
+	switch (evtdata->ReasonCode) {
+	case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT:
+	case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT:
+		block = 1;
+		break;
+	case MPI3_EVENT_DEV_STAT_RC_HIDDEN:
+		delete = 1;
+		hide = 1;
+		break;
+	case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING:
+		delete = 1;
+		remove = 1;
+		break;
+	case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP:
+	case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP:
+		ublock = 1;
+		break;
+	default:
+		break;
+	}
+
+	tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle);
+	if (!tgtdev)
+		goto out;
+	if (hide)
+		tgtdev->is_hidden = hide;
+	if (tgtdev->starget && tgtdev->starget->hostdata) {
+		scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *)
+		    tgtdev->starget->hostdata;
+		if (block)
+			atomic_inc(&scsi_tgt_priv_data->block_io);
+		if (delete)
+			scsi_tgt_priv_data->dev_removed = 1;
+		if (ublock)
+			atomic_dec_if_positive(&scsi_tgt_priv_data->block_io);
+	}
+	if (remove)
+		mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL,
+		    MPI3_CTRL_OP_REMOVE_DEVICE);
+	if (hide)
+		mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL,
+		    MPI3_CTRL_OP_HIDDEN_ACK);
+
+out:
+	if (tgtdev)
+		mpi3mr_tgtdev_put(tgtdev);
+
+}
+
+/**
+ * mpi3mr_os_handle_events - Firmware event handler
+ * @mrioc: Adapter instance reference
+ * @event_reply: Event data
+ *
+ * Identify whteher the event has to handled and acknowledged
+ * and either process the event in the tophalf and/or schedule a
+ * bottom half through mpi3mr_fwevt_worker.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc,
+	Mpi3EventNotificationReply_t *event_reply)
+{
+	u16 evt_type, sz;
+	struct mpi3mr_fwevt *fwevt = NULL;
+	bool ack_req = 0, process_evt_bh = 0;
+
+	if (mrioc->stop_drv_processing)
+		return;
+
+	if ((event_reply->MsgFlags & MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK)
+	    == MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED)
+		ack_req = 1;
+
+	evt_type = event_reply->Event;
+
+	switch (evt_type) {
+	case MPI3_EVENT_DEVICE_ADDED:
+	{
+		Mpi3DevicePage0_t *dev_pg0 =
+		    (Mpi3DevicePage0_t *) event_reply->EventData;
+		if (mpi3mr_create_tgtdev(mrioc, dev_pg0))
+			ioc_err(mrioc,
+			    "%s :Failed to add device in the device add event\n",
+			    __func__);
+		else
+			process_evt_bh = 1;
+		break;
+	}
+	case MPI3_EVENT_DEVICE_STATUS_CHANGE:
+	{
+		process_evt_bh = 1;
+		mpi3mr_devstatuschg_evt_th(mrioc, event_reply);
+		break;
+	}
+	case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+	{
+		process_evt_bh = 1;
+		mpi3mr_sastopochg_evt_th(mrioc, event_reply);
+		break;
+	}
+	case MPI3_EVENT_DEVICE_INFO_CHANGED:
+	{
+		process_evt_bh = 1;
+		break;
+	}
+	case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE:
+	case MPI3_EVENT_SAS_DISCOVERY:
+	case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR:
+		break;
+	default:
+		ioc_info(mrioc, "%s :Event 0x%02x is not handled\n",
+		    __func__, evt_type);
+		break;
+	}
+	if (process_evt_bh || ack_req) {
+		sz = event_reply->EventDataLength * 4;
+		fwevt = mpi3mr_alloc_fwevt(sz);
+		if (!fwevt) {
+			ioc_info(mrioc, "%s :failure at %s:%d/%s()!\n",
+			    __func__, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		memcpy(fwevt->event_data, event_reply->EventData, sz);
+		fwevt->mrioc = mrioc;
+		fwevt->event_id = evt_type;
+		fwevt->send_ack = ack_req;
+		fwevt->process_evt = process_evt_bh;
+		fwevt->evt_ctx = le32_to_cpu(event_reply->EventContext);
+		mpi3mr_fwevt_add_to_list(mrioc, fwevt);
+	}
+
+}
+
 /**
  * mpi3mr_process_op_reply_desc - reply descriptor handler
  * @mrioc: Adapter instance reference
@@ -587,6 +1865,33 @@  static int mpi3mr_scan_finished(struct Scsi_Host *shost,
  */
 static void mpi3mr_slave_destroy(struct scsi_device *sdev)
 {
+	struct Scsi_Host *shost;
+	struct mpi3mr_ioc *mrioc;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+	struct mpi3mr_tgt_dev *tgt_dev;
+	unsigned long flags;
+	struct scsi_target *starget;
+
+	if (!sdev->hostdata)
+		return;
+
+	starget = scsi_target(sdev);
+	shost = dev_to_shost(&starget->dev);
+	mrioc = shost_priv(shost);
+	scsi_tgt_priv_data = starget->hostdata;
+
+	scsi_tgt_priv_data->num_luns--;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+	if (tgt_dev && (!scsi_tgt_priv_data->num_luns))
+		tgt_dev->starget = NULL;
+	if (tgt_dev)
+		mpi3mr_tgtdev_put(tgt_dev);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
+	kfree(sdev->hostdata);
+	sdev->hostdata = NULL;
 }
 
 /**
@@ -599,6 +1904,35 @@  static void mpi3mr_slave_destroy(struct scsi_device *sdev)
  */
 static void mpi3mr_target_destroy(struct scsi_target *starget)
 {
+	struct Scsi_Host *shost;
+	struct mpi3mr_ioc *mrioc;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+	struct mpi3mr_tgt_dev *tgt_dev;
+	unsigned long flags;
+
+	if (!starget->hostdata)
+		return;
+
+	shost = dev_to_shost(&starget->dev);
+	mrioc = shost_priv(shost);
+	scsi_tgt_priv_data = starget->hostdata;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgt_dev = __mpi3mr_get_tgtdev_from_tgtpriv(mrioc, scsi_tgt_priv_data);
+	if (tgt_dev && (tgt_dev->starget == starget) &&
+	    (tgt_dev->perst_id == starget->id))
+		tgt_dev->starget = NULL;
+	if (tgt_dev) {
+		scsi_tgt_priv_data->tgt_dev = NULL;
+		scsi_tgt_priv_data->perst_id = 0;
+		mpi3mr_tgtdev_put(tgt_dev);
+		mpi3mr_tgtdev_put(tgt_dev);
+	}
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+
+	kfree(starget->hostdata);
+	starget->hostdata = NULL;
+
 }
 
 /**
@@ -612,7 +1946,25 @@  static void mpi3mr_target_destroy(struct scsi_target *starget)
  */
 static int mpi3mr_slave_configure(struct scsi_device *sdev)
 {
+	struct scsi_target *starget;
+	struct Scsi_Host *shost;
+	struct mpi3mr_ioc *mrioc;
+	struct mpi3mr_tgt_dev *tgt_dev;
+	unsigned long flags;
 	int retval = 0;
+
+	starget = scsi_target(sdev);
+	shost = dev_to_shost(&starget->dev);
+	mrioc = shost_priv(shost);
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
+	if (!tgt_dev)
+		return retval;
+
+	mpi3mr_tgtdev_put(tgt_dev);
+
 	return retval;
 }
 
@@ -626,7 +1978,37 @@  static int mpi3mr_slave_configure(struct scsi_device *sdev)
  */
 static int mpi3mr_slave_alloc(struct scsi_device *sdev)
 {
+	struct Scsi_Host *shost;
+	struct mpi3mr_ioc *mrioc;
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+	struct mpi3mr_tgt_dev *tgt_dev;
+	struct mpi3mr_sdev_priv_data *scsi_dev_priv_data;
+	unsigned long flags;
+	struct scsi_target *starget;
 	int retval = 0;
+
+	starget = scsi_target(sdev);
+	shost = dev_to_shost(&starget->dev);
+	mrioc = shost_priv(shost);
+	scsi_tgt_priv_data = starget->hostdata;
+
+	scsi_dev_priv_data = kzalloc(sizeof(*scsi_dev_priv_data), GFP_KERNEL);
+	if (!scsi_dev_priv_data)
+		return -ENOMEM;
+
+	scsi_dev_priv_data->lun_id = sdev->lun;
+	scsi_dev_priv_data->tgt_priv_data = scsi_tgt_priv_data;
+	sdev->hostdata = scsi_dev_priv_data;
+
+	scsi_tgt_priv_data->num_luns++;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+	if (tgt_dev && (tgt_dev->starget == NULL))
+		tgt_dev->starget = starget;
+	if (tgt_dev)
+		mpi3mr_tgtdev_put(tgt_dev);
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
 	return retval;
 }
 
@@ -640,7 +2022,33 @@  static int mpi3mr_slave_alloc(struct scsi_device *sdev)
  */
 static int mpi3mr_target_alloc(struct scsi_target *starget)
 {
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct mpi3mr_ioc *mrioc = shost_priv(shost);
+	struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data;
+	struct mpi3mr_tgt_dev *tgt_dev;
+	unsigned long flags;
 	int retval = -ENODEV;
+
+	scsi_tgt_priv_data = kzalloc(sizeof(*scsi_tgt_priv_data), GFP_KERNEL);
+	if (!scsi_tgt_priv_data)
+		return -ENOMEM;
+
+	starget->hostdata = scsi_tgt_priv_data;
+	scsi_tgt_priv_data->starget = starget;
+	scsi_tgt_priv_data->dev_handle = MPI3MR_INVALID_DEV_HANDLE;
+
+	spin_lock_irqsave(&mrioc->tgtdev_lock, flags);
+	tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id);
+	if (tgt_dev && !tgt_dev->is_hidden) {
+		scsi_tgt_priv_data->dev_handle = tgt_dev->dev_handle;
+		scsi_tgt_priv_data->perst_id = tgt_dev->perst_id;
+		scsi_tgt_priv_data->dev_type = tgt_dev->dev_type;
+		scsi_tgt_priv_data->tgt_dev = tgt_dev;
+		tgt_dev->starget = starget;
+		atomic_set(&scsi_tgt_priv_data->block_io, 0);
+		retval = 0;
+	}
+	spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags);
 	return retval;
 }
 
@@ -857,9 +2265,15 @@  mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&mrioc->admin_req_lock);
 	spin_lock_init(&mrioc->reply_free_queue_lock);
 	spin_lock_init(&mrioc->sbq_lock);
+	spin_lock_init(&mrioc->fwevt_lock);
+	spin_lock_init(&mrioc->tgtdev_lock);
 	spin_lock_init(&mrioc->watchdog_lock);
 	spin_lock_init(&mrioc->chain_buf_lock);
 
+	INIT_LIST_HEAD(&mrioc->fwevt_list);
+	INIT_LIST_HEAD(&mrioc->tgtdev_list);
+	INIT_LIST_HEAD(&mrioc->delayed_rmhs_list);
+
 	mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS);
 
 	if (pdev->revision)
@@ -877,6 +2291,17 @@  mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_channel = 1;
 	shost->max_id = 0xFFFFFFFF;
 
+	snprintf(mrioc->fwevt_worker_name, sizeof(mrioc->fwevt_worker_name),
+	    "%s%d_fwevt_wrkr", mrioc->driver_name, mrioc->id);
+	mrioc->fwevt_worker_thread = alloc_ordered_workqueue(
+	    mrioc->fwevt_worker_name, WQ_MEM_RECLAIM);
+	if (!mrioc->fwevt_worker_thread) {
+		ioc_err(mrioc, "failure at %s:%d/%s()!\n",
+		    __FILE__, __LINE__, __func__);
+		retval = -ENODEV;
+		goto out_fwevtthread_failed;
+	}
+
 	mrioc->is_driver_loading = 1;
 	if (mpi3mr_init_ioc(mrioc)) {
 		ioc_err(mrioc, "failure at %s:%d/%s()!\n",
@@ -903,6 +2328,8 @@  mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 addhost_failed:
 	mpi3mr_cleanup_ioc(mrioc);
 out_iocinit_failed:
+	destroy_workqueue(mrioc->fwevt_worker_thread);
+out_fwevtthread_failed:
 	spin_lock(&mrioc_list_lock);
 	list_del(&mrioc->list);
 	spin_unlock(&mrioc_list_lock);
@@ -924,14 +2351,30 @@  static void mpi3mr_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct mpi3mr_ioc *mrioc;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
+	struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
 
 	mrioc = shost_priv(shost);
 	while (mrioc->reset_in_progress || mrioc->is_driver_loading)
 		ssleep(1);
 
 	mrioc->stop_drv_processing = 1;
+	mpi3mr_cleanup_fwevt_list(mrioc);
+	spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+	wq = mrioc->fwevt_worker_thread;
+	mrioc->fwevt_worker_thread = NULL;
+	spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
 
 	scsi_remove_host(shost);
+	list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list,
+	    list) {
+		mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev);
+		mpi3mr_tgtdev_del_from_list(mrioc, tgtdev);
+		mpi3mr_tgtdev_put(tgtdev);
+	}
 
 	mpi3mr_cleanup_ioc(mrioc);
 
@@ -955,6 +2398,8 @@  static void mpi3mr_shutdown(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct mpi3mr_ioc *mrioc;
+	struct workqueue_struct	*wq;
+	unsigned long flags;
 
 	if (!shost)
 		return;
@@ -963,6 +2408,13 @@  static void mpi3mr_shutdown(struct pci_dev *pdev)
 	while (mrioc->reset_in_progress || mrioc->is_driver_loading)
 		ssleep(1);
 	mrioc->stop_drv_processing = 1;
+	mpi3mr_cleanup_fwevt_list(mrioc);
+	spin_lock_irqsave(&mrioc->fwevt_lock, flags);
+	wq = mrioc->fwevt_worker_thread;
+	mrioc->fwevt_worker_thread = NULL;
+	spin_unlock_irqrestore(&mrioc->fwevt_lock, flags);
+	if (wq)
+		destroy_workqueue(wq);
 
 	mpi3mr_cleanup_ioc(mrioc);