| Message ID | 20210121170339.11891-1-ematsumiya@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] scsi: smartpqi: create module parameters for LUN reset | expand |
Hi, On 01/21, Enzo Matsumiya wrote: >Commit c2922f174fa0 ("scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung") >added support for a timeout on LUN resets. > >However, when there are 2 or more devices connected to the same >controller and you hot-remove one of them, I/O will stall on the >devices still online for PQI_LUN_RESET_RETRIES * PQI_LUN_RESET_RETRY_INTERVAL_MSECS >miliseconds. > >This commit makes those values configurable via module parameters. > >Changing the bail out condition on rc in _pqi_device_reset() might be possible, >but could also break the original purpose of commit c2922f174fa0. > >Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> >--- > drivers/scsi/smartpqi/smartpqi_init.c | 18 ++++++++++++++---- > 1 file changed, 14 insertions(+), 4 deletions(-) > >diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c >index c53f456fbd09..9835b2e5b91a 100644 >--- a/drivers/scsi/smartpqi/smartpqi_init.c >+++ b/drivers/scsi/smartpqi/smartpqi_init.c >@@ -157,6 +157,18 @@ module_param_named(hide_vsep, > MODULE_PARM_DESC(hide_vsep, > "Hide the virtual SEP for direct attached drives."); > >+static int pqi_lun_reset_retries = 3; >+module_param_named(lun_reset_retries, >+ pqi_lun_reset_retries, int, 0644); >+MODULE_PARM_DESC(lun_reset_retries, >+ "Number of retries when resetting a LUN"); >+ >+static int pqi_lun_reset_tmo_interval = 10000; >+module_param_named(lun_reset_tmo_interval, >+ pqi_lun_reset_tmo_interval, int, 0644); >+MODULE_PARM_DESC(lun_reset_tmo_interval, >+ "LUN reset timeout interval (in miliseconds)"); >+ > static char *raid_levels[] = { > "RAID-0", > "RAID-4", >@@ -5687,8 +5699,6 @@ static int pqi_lun_reset(struct pqi_ctrl_info *ctrl_info, > > /* Performs a reset at the LUN level. */ > >-#define PQI_LUN_RESET_RETRIES 3 >-#define PQI_LUN_RESET_RETRY_INTERVAL_MSECS 10000 > #define PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS 120 > > static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info, >@@ -5700,9 +5710,9 @@ static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info, > > for (retries = 0;;) { > rc = pqi_lun_reset(ctrl_info, device); >- if (rc == 0 || ++retries > PQI_LUN_RESET_RETRIES) >+ if (rc == 0 || ++retries > pqi_lun_reset_retries) > break; >- msleep(PQI_LUN_RESET_RETRY_INTERVAL_MSECS); >+ msleep(pqi_lun_reset_tmo_interval); > } > > timeout_secs = rc ? PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS : NO_TIMEOUT; >-- >2.30.0 > Can anyone give me some feedback on this please? Cheers, Enzo
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index c53f456fbd09..9835b2e5b91a 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -157,6 +157,18 @@ module_param_named(hide_vsep, MODULE_PARM_DESC(hide_vsep, "Hide the virtual SEP for direct attached drives."); +static int pqi_lun_reset_retries = 3; +module_param_named(lun_reset_retries, + pqi_lun_reset_retries, int, 0644); +MODULE_PARM_DESC(lun_reset_retries, + "Number of retries when resetting a LUN"); + +static int pqi_lun_reset_tmo_interval = 10000; +module_param_named(lun_reset_tmo_interval, + pqi_lun_reset_tmo_interval, int, 0644); +MODULE_PARM_DESC(lun_reset_tmo_interval, + "LUN reset timeout interval (in miliseconds)"); + static char *raid_levels[] = { "RAID-0", "RAID-4", @@ -5687,8 +5699,6 @@ static int pqi_lun_reset(struct pqi_ctrl_info *ctrl_info, /* Performs a reset at the LUN level. */ -#define PQI_LUN_RESET_RETRIES 3 -#define PQI_LUN_RESET_RETRY_INTERVAL_MSECS 10000 #define PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS 120 static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info, @@ -5700,9 +5710,9 @@ static int _pqi_device_reset(struct pqi_ctrl_info *ctrl_info, for (retries = 0;;) { rc = pqi_lun_reset(ctrl_info, device); - if (rc == 0 || ++retries > PQI_LUN_RESET_RETRIES) + if (rc == 0 || ++retries > pqi_lun_reset_retries) break; - msleep(PQI_LUN_RESET_RETRY_INTERVAL_MSECS); + msleep(pqi_lun_reset_tmo_interval); } timeout_secs = rc ? PQI_LUN_RESET_PENDING_IO_TIMEOUT_SECS : NO_TIMEOUT;
Commit c2922f174fa0 ("scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung") added support for a timeout on LUN resets. However, when there are 2 or more devices connected to the same controller and you hot-remove one of them, I/O will stall on the devices still online for PQI_LUN_RESET_RETRIES * PQI_LUN_RESET_RETRY_INTERVAL_MSECS miliseconds. This commit makes those values configurable via module parameters. Changing the bail out condition on rc in _pqi_device_reset() might be possible, but could also break the original purpose of commit c2922f174fa0. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> --- drivers/scsi/smartpqi/smartpqi_init.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)