@@ -8174,8 +8174,11 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT ||
(ioc_state & MPI2_IOC_STATE_MASK) ==
- MPI2_IOC_STATE_COREDUMP)
+ MPI2_IOC_STATE_COREDUMP) {
is_fault = 1;
+ ioc->htb_rel.trigger_info_dwords[1] =
+ (ioc_state & MPI2_DOORBELL_DATA_MASK);
+ }
}
_base_pre_reset_handler(ioc);
mpt3sas_wait_for_commands_to_complete(ioc);
@@ -1073,6 +1073,50 @@ struct hba_port {
#define MULTIPATH_DISABLED_PORT_ID 0xFF
+/**
+ * struct htb_rel_query - diagnostic buffer release reason
+ * @unique_id - unique id associated with this buffer.
+ * @buffer_rel_condition - Release condition ioctl/sysfs/reset
+ * @reserved
+ * @trigger_type - Master/Event/scsi/MPI
+ * @trigger_info_dwords - Data Correspondig to trigger type
+ */
+struct htb_rel_query {
+ u16 buffer_rel_condition;
+ u16 reserved;
+ u32 trigger_type;
+ u32 trigger_info_dwords[2];
+};
+
+/* Buffer_rel_condition bit fields */
+
+/* Bit 0 - Diag Buffer not Released */
+#define MPT3_DIAG_BUFFER_NOT_RELEASED (0x00)
+/* Bit 0 - Diag Buffer Released */
+#define MPT3_DIAG_BUFFER_RELEASED (0x01)
+
+/*
+ * Bit 1 - Diag Buffer Released by IOCTL,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_IOCTL (0x02 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 2 - Diag Buffer Released by Trigger,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_TRIGGER (0x04 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 3 - Diag Buffer Released by SysFs,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_SYSFS (0x08 | MPT3_DIAG_BUFFER_RELEASED)
+
+/* DIAG RESET Master trigger flags */
+#define MPT_DIAG_RESET_ISSUED_BY_DRIVER 0x00000000
+#define MPT_DIAG_RESET_ISSUED_BY_USER 0x00000001
+
typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
/**
* struct MPT3SAS_ADAPTER - per adapter struct
@@ -1529,6 +1573,8 @@ struct MPT3SAS_ADAPTER {
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
u32 ring_buffer_offset;
u32 ring_buffer_sz;
+ struct htb_rel_query htb_rel;
+ u8 reset_from_user;
u8 is_warpdrive;
u8 is_mcpu_endpoint;
u8 hide_ir_msg;
@@ -1565,6 +1611,7 @@ struct mpt3sas_debugfs_buffer {
};
#define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001
+#define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY 0x00000002
typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
@@ -479,6 +479,8 @@ void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
ioc_info(ioc,
"%s: Releasing the trace buffer due to adapter reset.",
__func__);
+ ioc->htb_rel.buffer_rel_condition =
+ MPT3_DIAG_BUFFER_REL_TRIGGER;
mpt3sas_send_diag_release(ioc, i, &issue_reset);
}
}
@@ -1334,6 +1336,7 @@ _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
+ ioc->reset_from_user = 1;
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
ioc_info(ioc,
"Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
@@ -1687,6 +1690,9 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
request_data = ioc->diag_buffer[buffer_type];
request_data_sz = diag_register->requested_buffer_size;
ioc->unique_id[buffer_type] = diag_register->unique_id;
+ /* Reset ioc variables used for additional query commands */
+ ioc->reset_from_user = 0;
+ memset(&ioc->htb_rel, 0, sizeof(struct htb_rel_query));
ioc->diag_buffer_status[buffer_type] &=
MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
memcpy(ioc->product_specific[buffer_type],
@@ -2469,7 +2475,61 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
return rc;
}
+/**
+ * _ctl_addnl_diag_query - query relevant info associated with diag buffers
+ * @ioc: per adapter object
+ * @arg: user space buffer containing ioctl content
+ *
+ * The application will send only unique_id. Driver will
+ * inspect unique_id first, if valid, fill the details related to cause
+ * for diag buffer release.
+ */
+static long
+_ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
+{
+ struct mpt3_addnl_diag_query karg;
+ u32 buffer_type = 0;
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ pr_err("%s: failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ dctlprintk(ioc, ioc_info(ioc, "%s\n", __func__));
+ if (karg.unique_id == 0) {
+ ioc_err(ioc, "%s: unique_id is(0x%08x)\n",
+ __func__, karg.unique_id);
+ return -EPERM;
+ }
+ buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
+ if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
+ ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
+ __func__, karg.unique_id);
+ return -EPERM;
+ }
+ memset(&karg.buffer_rel_condition, 0, sizeof(struct htb_rel_query));
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n",
+ __func__, buffer_type);
+ goto out;
+ }
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
+ ioc_err(ioc, "%s: buffer_type(0x%02x) is not released\n",
+ __func__, buffer_type);
+ return -EPERM;
+ }
+ memcpy(&karg.buffer_rel_condition, &ioc->htb_rel,
+ sizeof(struct htb_rel_query));
+out:
+ if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) {
+ ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n",
+ __func__, arg);
+ return -EFAULT;
+ }
+ return 0;
+}
#ifdef CONFIG_COMPAT
/**
@@ -2533,7 +2593,7 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
struct MPT3SAS_ADAPTER *ioc;
struct mpt3_ioctl_header ioctl_header;
enum block_state state;
- long ret = -EINVAL;
+ long ret = -ENOIOCTLCMD;
/* get IOCTL header */
if (copy_from_user(&ioctl_header, (char __user *)arg,
@@ -2643,6 +2703,10 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
ret = _ctl_diag_read_buffer(ioc, arg);
break;
+ case MPT3ADDNLDIAGQUERY:
+ if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query))
+ ret = _ctl_addnl_diag_query(ioc, arg);
+ break;
default:
dctlprintk(ioc,
ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
@@ -3425,6 +3489,7 @@ host_trace_buffer_enable_store(struct device *cdev,
MPT3_DIAG_BUFFER_IS_RELEASED))
goto out;
ioc_info(ioc, "releasing host trace buffer\n");
+ ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_SYSFS;
mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
&issue_reset);
}
@@ -94,6 +94,8 @@
struct mpt3_diag_query)
#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \
struct mpt3_diag_read_buffer)
+#define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \
+ struct mpt3_addnl_diag_query)
/* Trace Buffer default UniqueId */
#define MPT2DIAGBUFFUNIQUEID (0x07075900)
@@ -430,4 +432,24 @@ struct mpt3_diag_read_buffer {
uint32_t diagnostic_data[1];
};
+/**
+ * struct mpt3_addnl_diag_query - diagnostic buffer release reason
+ * @hdr - generic header
+ * @unique_id - unique id associated with this buffer.
+ * @buffer_rel_condition - Release condition ioctl/sysfs/reset
+ * @reserved1
+ * @trigger_type - Master/Event/scsi/MPI
+ * @trigger_info_dwords - Data Correspondig to trigger type
+ * @reserved2
+ */
+struct mpt3_addnl_diag_query {
+ struct mpt3_ioctl_header hdr;
+ uint32_t unique_id;
+ uint16_t buffer_rel_condition;
+ uint16_t reserved1;
+ uint32_t trigger_type;
+ uint32_t trigger_info_dwords[2];
+ uint32_t reserved2[2];
+};
+
#endif /* MPT3SAS_CTL_H_INCLUDED */
@@ -11922,6 +11922,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* Enable MEMORY MOVE support flag.
*/
ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_MEMMOVE;
+ /* Enable ADDITIONAL QUERY support flag. */
+ ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY;
ioc->enable_sdev_max_qd = enable_sdev_max_qd;
@@ -132,6 +132,35 @@ mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
&issue_reset);
}
+ ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_TRIGGER;
+ if (event_data) {
+ ioc->htb_rel.trigger_type = event_data->trigger_type;
+ switch (event_data->trigger_type) {
+ case MPT3SAS_TRIGGER_SCSI:
+ memcpy(&ioc->htb_rel.trigger_info_dwords,
+ &event_data->u.scsi,
+ sizeof(struct SL_WH_SCSI_TRIGGER_T));
+ break;
+ case MPT3SAS_TRIGGER_MPI:
+ memcpy(&ioc->htb_rel.trigger_info_dwords,
+ &event_data->u.mpi,
+ sizeof(struct SL_WH_MPI_TRIGGER_T));
+ break;
+ case MPT3SAS_TRIGGER_MASTER:
+ ioc->htb_rel.trigger_info_dwords[0] =
+ event_data->u.master.MasterData;
+ break;
+ case MPT3SAS_TRIGGER_EVENT:
+ memcpy(&ioc->htb_rel.trigger_info_dwords,
+ &event_data->u.event,
+ sizeof(struct SL_WH_EVENT_TRIGGER_T));
+ break;
+ default:
+ ioc_err(ioc, "%d - Is not a valid Trigger type\n",
+ event_data->trigger_type);
+ break;
+ }
+ }
_mpt3sas_raise_sigio(ioc, event_data);
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
@@ -201,9 +230,14 @@ mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask)
event_data.u.master.MasterData = trigger_bitmask;
if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT ||
- trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET)
+ trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) {
+ ioc->htb_rel.trigger_type = MPT3SAS_TRIGGER_MASTER;
+ ioc->htb_rel.trigger_info_dwords[0] = trigger_bitmask;
+ if (ioc->reset_from_user)
+ ioc->htb_rel.trigger_info_dwords[1] =
+ MPT_DIAG_RESET_ISSUED_BY_USER;
_mpt3sas_raise_sigio(ioc, &event_data);
- else
+ } else
mpt3sas_send_trigger_data_event(ioc, &event_data);
out:
When a host trace buffer is released, applications never know for what reason the buffer is released. So add a new IOCTL MPT3ADDNLDIAGQUERY to provide the trigger information due to which the diag buffer is released. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 +- drivers/scsi/mpt3sas/mpt3sas_base.h | 47 +++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 67 ++++++++++++++++++++- drivers/scsi/mpt3sas/mpt3sas_ctl.h | 22 +++++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 + drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 38 +++++++++++- 6 files changed, 177 insertions(+), 4 deletions(-)