diff mbox series

[v4,06/11] qla2xxx: Add authentication pass + fail bsg's

Message ID 20210624052606.21613-7-njavali@marvell.com (mailing list archive)
State New, archived
Headers show
Series qla2xxx: Add EDIF support | expand

Commit Message

Nilesh Javali June 24, 2021, 5:26 a.m. UTC
From: Quinn Tran <qutran@marvell.com>

Latest FC adapter from Marvell has the ability to encrypt
data in flight (EDIF) feature. This feature require an
application (ex: ipsec, etc) to act as an authenticator.

On completion of the authentication process, the authentication
application will notify driver on whether it is successful or not.

If success, application will use the QL_VND_SC_AUTH_OK BSG call
to tell driver to proceed to the PRLI phase.

If fail, application will use the QL_VND_SC_AUTH_FAIL bsg call
to tell driver to tear down the connection and retry. In
the case where an existing session is active, the re-key
process can fail. The session tear down ensure data is not
further compromise.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com>
Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com>
Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_edif.c | 213 +++++++++++++++++++++++++++++++-
 drivers/scsi/qla2xxx/qla_gbl.h  |   1 +
 drivers/scsi/qla2xxx/qla_init.c |   3 +-
 3 files changed, 209 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_edif.c b/drivers/scsi/qla2xxx/qla_edif.c
index 15f9e10ac257..8f486bd1201f 100644
--- a/drivers/scsi/qla2xxx/qla_edif.c
+++ b/drivers/scsi/qla2xxx/qla_edif.c
@@ -656,6 +656,204 @@  qla_edif_app_stop(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 	return rval;
 }
 
+static int
+qla_edif_app_chk_sa_update(scsi_qla_host_t *vha, fc_port_t *fcport,
+		struct app_plogi_reply *appplogireply)
+{
+	int	ret = 0;
+
+	if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n",
+		    __func__, fcport->port_name, fcport->edif.tx_sa_set,
+		    fcport->edif.rx_sa_set);
+		appplogireply->prli_status = 0;
+		ret = 1;
+	} else  {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC Both SA(s) updated.\n", __func__,
+		    fcport->port_name);
+		fcport->edif.rx_sa_set = fcport->edif.tx_sa_set = 0;
+		fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending = 0;
+		appplogireply->prli_status = 1;
+	}
+	return ret;
+}
+
+/**
+ * qla_edif_app_authok - authentication by app succeeded.  Driver can proceed
+ *   with prli
+ * @vha: host adapter pointer
+ * @bsg_job: user request
+ */
+static int
+qla_edif_app_authok(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
+{
+	int32_t			rval = 0;
+	struct auth_complete_cmd appplogiok;
+	struct app_plogi_reply	appplogireply = {0};
+	struct fc_bsg_reply	*bsg_reply = bsg_job->reply;
+	fc_port_t		*fcport = NULL;
+	port_id_t		portid = {0};
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, &appplogiok,
+	    sizeof(struct auth_complete_cmd));
+
+	switch (appplogiok.type) {
+	case PL_TYPE_WWPN:
+		fcport = qla2x00_find_fcport_by_wwpn(vha,
+		    appplogiok.u.wwpn, 0);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s wwpn lookup failed: %8phC\n",
+			    __func__, appplogiok.u.wwpn);
+		break;
+	case PL_TYPE_DID:
+		fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s d_id lookup failed: %x\n", __func__,
+			    portid.b24);
+		break;
+	default:
+		ql_dbg(ql_dbg_edif, vha, 0x911d,
+		    "%s undefined type: %x\n", __func__,
+		    appplogiok.type);
+		break;
+	}
+
+	if (!fcport) {
+		SET_DID_STATUS(bsg_reply->result, DID_ERROR);
+		goto errstate_exit;
+	}
+
+	/*
+	 * if port is online then this is a REKEY operation
+	 * Only do sa update checking
+	 */
+	if (atomic_read(&fcport->state) == FCS_ONLINE) {
+		ql_dbg(ql_dbg_edif, vha, 0x911d,
+		    "%s Skipping PRLI complete based on rekey\n", __func__);
+		appplogireply.prli_status = 1;
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		qla_edif_app_chk_sa_update(vha, fcport, &appplogireply);
+		goto errstate_exit;
+	}
+
+	/* make sure in AUTH_PENDING or else reject */
+	if (fcport->disc_state != DSC_LOGIN_AUTH_PEND) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC is not in auth pending state (%x)\n",
+		    __func__, fcport->port_name, fcport->disc_state);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		appplogireply.prli_status = 0;
+		goto errstate_exit;
+	}
+
+	SET_DID_STATUS(bsg_reply->result, DID_OK);
+	appplogireply.prli_status = 1;
+	if (!(fcport->edif.rx_sa_set && fcport->edif.tx_sa_set)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s: wwpn %8phC Both SA indexes has not been SET TX %d, RX %d.\n",
+		    __func__, fcport->port_name, fcport->edif.tx_sa_set,
+		    fcport->edif.rx_sa_set);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		appplogireply.prli_status = 0;
+		goto errstate_exit;
+
+	} else {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s wwpn %8phC Both SA(s) updated.\n", __func__,
+		    fcport->port_name);
+		fcport->edif.rx_sa_set = fcport->edif.tx_sa_set = 0;
+		fcport->edif.rx_sa_pending = fcport->edif.tx_sa_pending = 0;
+	}
+
+	if (qla_ini_mode_enabled(vha)) {
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s AUTH complete - RESUME with prli for wwpn %8phC\n",
+		    __func__, fcport->port_name);
+		qla_edif_reset_auth_wait(fcport, DSC_LOGIN_PEND, 1);
+		qla24xx_post_prli_work(vha, fcport);
+	}
+
+errstate_exit:
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+	    bsg_job->reply_payload.sg_cnt, &appplogireply,
+	    sizeof(struct app_plogi_reply));
+
+	return rval;
+}
+
+/**
+ * qla_edif_app_authfail - authentication by app has failed.  Driver is given
+ *   notice to tear down current session.
+ * @vha: host adapter pointer
+ * @bsg_job: user request
+ */
+static int
+qla_edif_app_authfail(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
+{
+	int32_t			rval = 0;
+	struct auth_complete_cmd appplogifail;
+	struct fc_bsg_reply	*bsg_reply = bsg_job->reply;
+	fc_port_t		*fcport = NULL;
+	port_id_t		portid = {0};
+
+	ql_dbg(ql_dbg_edif, vha, 0x911d, "%s app auth fail\n", __func__);
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, &appplogifail,
+	    sizeof(struct auth_complete_cmd));
+
+	/*
+	 * TODO: edif: app has failed this plogi. Inform driver to
+	 * take any action (if any).
+	 */
+	switch (appplogifail.type) {
+	case PL_TYPE_WWPN:
+		fcport = qla2x00_find_fcport_by_wwpn(vha,
+		    appplogifail.u.wwpn, 0);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		break;
+	case PL_TYPE_DID:
+		fcport = qla2x00_find_fcport_by_pid(vha, &appplogifail.u.d_id);
+		if (!fcport)
+			ql_dbg(ql_dbg_edif, vha, 0x911d,
+			    "%s d_id lookup failed: %x\n", __func__,
+			    portid.b24);
+		SET_DID_STATUS(bsg_reply->result, DID_OK);
+		break;
+	default:
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s undefined type: %x\n", __func__,
+		    appplogifail.type);
+		bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+		SET_DID_STATUS(bsg_reply->result, DID_ERROR);
+		rval = -1;
+		break;
+	}
+
+	ql_dbg(ql_dbg_edif, vha, 0x911d,
+	    "%s fcport is 0x%p\n", __func__, fcport);
+
+	if (fcport) {
+		/* set/reset edif values and flags */
+		ql_dbg(ql_dbg_edif, vha, 0x911e,
+		    "%s reset the auth process - %8phC, loopid=%x portid=%06x.\n",
+		    __func__, fcport->port_name, fcport->loop_id, fcport->d_id.b24);
+
+		if (qla_ini_mode_enabled(fcport->vha)) {
+			fcport->send_els_logo = 1;
+			qla_edif_reset_auth_wait(fcport, DSC_LOGIN_PEND, 0);
+		}
+	}
+
+	return rval;
+}
+
 /**
  * qla_edif_app_getfcinfo - app would like to read session info (wwpn, nportid,
  *   [initiator|target] mode.  It can specific session with specific nport id or
@@ -697,8 +895,7 @@  qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 			tdid = app_req.remote_pid;
 
 			ql_dbg(ql_dbg_edif, vha, 0x2058,
-			    "APP request entry - portid=%06x.\n",
-			    tdid.b24);
+			    "APP request entry - portid=%06x.\n", tdid.b24);
 
 			/* Ran out of space */
 			if (pcnt > app_req.num_ports)
@@ -719,10 +916,8 @@  qla_edif_app_getfcinfo(scsi_qla_host_t *vha, struct bsg_job *bsg_job)
 			app_reply->ports[pcnt].remote_pid = fcport->d_id;
 
 			ql_dbg(ql_dbg_edif, vha, 0x2058,
-			    "Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%02x%02x%02x.\n",
-			    fcport->node_name, fcport->port_name, pcnt,
-			    fcport->d_id.b.domain, fcport->d_id.b.area,
-			    fcport->d_id.b.al_pa);
+			    "Found FC_SP fcport - nn %8phN pn %8phN pcnt %d portid=%06x\n",
+			    fcport->node_name, fcport->port_name, pcnt, fcport->d_id.b24);
 
 			switch (fcport->edif.auth_state) {
 			case VND_CMD_AUTH_STATE_ELS_RCVD:
@@ -888,6 +1083,12 @@  qla_edif_app_mgmt(struct bsg_job *bsg_job)
 	case QL_VND_SC_APP_STOP:
 		rval = qla_edif_app_stop(vha, bsg_job);
 		break;
+	case QL_VND_SC_AUTH_OK:
+		rval = qla_edif_app_authok(vha, bsg_job);
+		break;
+	case QL_VND_SC_AUTH_FAIL:
+		rval = qla_edif_app_authfail(vha, bsg_job);
+		break;
 	case QL_VND_SC_GET_FCINFO:
 		rval = qla_edif_app_getfcinfo(vha, bsg_job);
 		break;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e7c5143c66ef..d9d554101788 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -12,6 +12,7 @@ 
  * Global Function Prototypes in qla_init.c source file.
  */
 extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
+extern int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport);
 
 extern int qla2100_pci_config(struct scsi_qla_host *);
 extern int qla2300_pci_config(struct scsi_qla_host *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 663182f16471..71f6c76be401 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -34,7 +34,6 @@  static int qla2x00_restart_isp(scsi_qla_host_t *);
 static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
 static int qla84xx_init_chip(scsi_qla_host_t *);
 static int qla25xx_init_queues(struct qla_hw_data *);
-static int qla24xx_post_prli_work(struct scsi_qla_host*, fc_port_t *);
 static void qla24xx_handle_gpdb_event(scsi_qla_host_t *vha,
 				      struct event_arg *ea);
 static void qla24xx_handle_prli_done_event(struct scsi_qla_host *,
@@ -1191,7 +1190,7 @@  static void qla24xx_async_gpdb_sp_done(srb_t *sp, int res)
 	sp->free(sp);
 }
 
-static int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
+int qla24xx_post_prli_work(struct scsi_qla_host *vha, fc_port_t *fcport)
 {
 	struct qla_work_evt *e;