diff mbox series

[3/6] lpfc: Revise Topology and RAS support checks for new adapters

Message ID 20210722221721.74388-4-jsmart2021@gmail.com (mailing list archive)
State Accepted
Headers show
Series lpfc: Update lpfc to revision 14.0.0.0 | expand

Commit Message

James Smart July 22, 2021, 10:17 p.m. UTC
Support for Topology and RAS logging capabilities were qualified by pcie
device id checks necessitating additional driver changes for new device
ids.

Reduce reliance on specific pcie device ids by substituting checks for
sli family information. This automatically picks up support on the newest
hardware.

Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_attr.c | 14 +++++++++-----
 drivers/scsi/lpfc/lpfc_hw4.h  |  4 ++++
 drivers/scsi/lpfc/lpfc_init.c | 34 ++++++++++++++++++++--------------
 drivers/scsi/lpfc/lpfc_mbox.c |  5 +++--
 drivers/scsi/lpfc/lpfc_scsi.c |  8 ++------
 5 files changed, 38 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 457989cfc0b7..a5154856bc0f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4038,6 +4038,7 @@  lpfc_topology_store(struct device *dev, struct device_attribute *attr,
 	const char *val_buf = buf;
 	int err;
 	uint32_t prev_val;
+	u8 sli_family, if_type;
 
 	if (!strncmp(buf, "nolip ", strlen("nolip "))) {
 		nolip = 1;
@@ -4061,13 +4062,16 @@  lpfc_topology_store(struct device *dev, struct device_attribute *attr,
 		/*
 		 * The 'topology' is not a configurable parameter if :
 		 *   - persistent topology enabled
-		 *   - G7/G6 with no private loop support
+		 *   - ASIC_GEN_NUM >= 0xC, with no private loop support
 		 */
-
+		sli_family = bf_get(lpfc_sli_intf_sli_family,
+				    &phba->sli4_hba.sli_intf);
+		if_type = bf_get(lpfc_sli_intf_if_type,
+				 &phba->sli4_hba.sli_intf);
 		if ((phba->hba_flag & HBA_PERSISTENT_TOPO ||
-		     (!phba->sli4_hba.pc_sli4_params.pls &&
-		     (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
-		     phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC))) &&
+		    (!phba->sli4_hba.pc_sli4_params.pls &&
+		     (sli_family == LPFC_SLI_INTF_FAMILY_G6 ||
+		      if_type == LPFC_SLI_INTF_IF_TYPE_6))) &&
 		    val == 4) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
 				"3114 Loop mode not supported\n");
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index c31a0cbcc208..aadbb0de629d 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -94,6 +94,9 @@  struct lpfc_sli_intf {
 #define LPFC_SLI_INTF_FAMILY_BE3	0x1
 #define LPFC_SLI_INTF_FAMILY_LNCR_A0	0xa
 #define LPFC_SLI_INTF_FAMILY_LNCR_B0	0xb
+#define LPFC_SLI_INTF_FAMILY_G6		0xc
+#define LPFC_SLI_INTF_FAMILY_G7		0xd
+#define LPFC_SLI_INTF_FAMILY_G7P	0xe
 #define lpfc_sli_intf_slirev_SHIFT		4
 #define lpfc_sli_intf_slirev_MASK		0x0000000F
 #define lpfc_sli_intf_slirev_WORD		word0
@@ -4719,6 +4722,7 @@  union lpfc_wqe128 {
 
 #define MAGIC_NUMBER_G6 0xFEAA0003
 #define MAGIC_NUMBER_G7 0xFEAA0005
+#define MAGIC_NUMBER_G7P 0xFEAA0020
 
 struct lpfc_grp_hdr {
 	uint32_t size;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f08129c67a2e..ead8e91e8625 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8550,9 +8550,12 @@  lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 	}
 	/* FW supports persistent topology - override module parameter value */
 	phba->hba_flag |= HBA_PERSISTENT_TOPO;
-	switch (phba->pcidev->device) {
-	case PCI_DEVICE_ID_LANCER_G7_FC:
-	case PCI_DEVICE_ID_LANCER_G6_FC:
+
+	/* if ASIC_GEN_NUM >= 0xC) */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_IF_TYPE_6) ||
+	    (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_FAMILY_G6)) {
 		if (!tf) {
 			phba->cfg_topology = ((pt == LINK_FLAGS_LOOP)
 					? FLAGS_TOPOLOGY_MODE_LOOP
@@ -8560,8 +8563,7 @@  lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 		} else {
 			phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
 		}
-		break;
-	default:	/* G5 */
+	} else { /* G5 */
 		if (tf) {
 			/* If topology failover set - pt is '0' or '1' */
 			phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
@@ -8571,7 +8573,6 @@  lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
 					? FLAGS_TOPOLOGY_MODE_PT_PT
 					: FLAGS_TOPOLOGY_MODE_LOOP);
 		}
-		break;
 	}
 	if (phba->hba_flag & HBA_PERSISTENT_TOPO) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -12991,7 +12992,9 @@  lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
 	const struct firmware *fw)
 {
 	int rc;
+	u8 sli_family;
 
+	sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
 	/* Three cases:  (1) FW was not supported on the detected adapter.
 	 * (2) FW update has been locked out administratively.
 	 * (3) Some other error during FW update.
@@ -12999,10 +13002,12 @@  lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
 	 * for admin diagnosis.
 	 */
 	if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
-	    (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G6 &&
 	     magic_number != MAGIC_NUMBER_G6) ||
-	    (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC &&
-	     magic_number != MAGIC_NUMBER_G7)) {
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G7 &&
+	     magic_number != MAGIC_NUMBER_G7) ||
+	    (sli_family == LPFC_SLI_INTF_FAMILY_G7P &&
+	     magic_number != MAGIC_NUMBER_G7P)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
 				"3030 This firmware version is not supported on"
 				" this HBA model. Device:%x Magic:%x Type:%x "
@@ -14053,17 +14058,18 @@  lpfc_sli4_oas_verify(struct lpfc_hba *phba)
 void
 lpfc_sli4_ras_init(struct lpfc_hba *phba)
 {
-	switch (phba->pcidev->device) {
-	case PCI_DEVICE_ID_LANCER_G6_FC:
-	case PCI_DEVICE_ID_LANCER_G7_FC:
+	/* if ASIC_GEN_NUM >= 0xC) */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_IF_TYPE_6) ||
+	    (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_FAMILY_G6)) {
 		phba->ras_fwlog.ras_hwsupport = true;
 		if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn) &&
 		    phba->cfg_ras_fwlog_buffsize)
 			phba->ras_fwlog.ras_enabled = true;
 		else
 			phba->ras_fwlog.ras_enabled = false;
-		break;
-	default:
+	} else {
 		phba->ras_fwlog.ras_hwsupport = false;
 	}
 }
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 84bc373190d8..6c754ee96bee 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -513,8 +513,9 @@  lpfc_init_link(struct lpfc_hba * phba,
 		break;
 	}
 
-	if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
-	     phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+	/* Topology handling for ASIC_GEN_NUM 0xC and later */
+	if ((phba->sli4_hba.pc_sli4_params.sli_family == LPFC_SLI_INTF_FAMILY_G6 ||
+	     phba->sli4_hba.pc_sli4_params.if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
 	    !(phba->sli4_hba.pc_sli4_params.pls) &&
 	    mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
 		mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 10002a13c5c6..ee4ff4855866 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5029,12 +5029,8 @@  lpfc_check_pci_resettable(struct lpfc_hba *phba)
 		}
 
 		/* Check for valid Emulex Device ID */
-		switch (ptr->device) {
-		case PCI_DEVICE_ID_LANCER_FC:
-		case PCI_DEVICE_ID_LANCER_G6_FC:
-		case PCI_DEVICE_ID_LANCER_G7_FC:
-			break;
-		default:
+		if (phba->sli_rev != LPFC_SLI_REV4 ||
+		    phba->hba_flag & HBA_FCOE_MODE) {
 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 					"8347 Incapable PCI reset device: "
 					"0x%04x\n", ptr->device);