diff mbox series

[v3,1/4] block: Add concurrent positioning ranges support

Message ID 20210726013806.84815-2-damien.lemoal@wdc.com (mailing list archive)
State Superseded
Headers show
Series Initial support for multi-actuator HDDs | expand

Commit Message

Damien Le Moal July 26, 2021, 1:38 a.m. UTC
The Concurrent Positioning Ranges VPD page (for SCSI) and Log (for ATA)
contain parameters describing the number of sets of contiguous LBAs that
can be served independently by a single LUN multi-actuator disk. This
patch provides the blk_queue_set_cranges() function allowing a device
driver to signal to the block layer that a disk has multiple actuators,
each one serving a contiguous range of sectors. To describe the set
of sector ranges representing the different actuators of a device, the
data type struct blk_cranges is introduced.

For a device with multiple actuators, a struct blk_cranges is attached
to the device request queue by the blk_queue_set_cranges() function. The
function blk_alloc_cranges() is provided for drivers to allocate this
structure.

The blk_cranges structure contains kobjects (struct kobject) to register
with sysfs the set of sector ranges defined by a device. On initial
device scan, this registration is done from blk_register_queue() using
the block layer internal function blk_register_cranges(). If a driver
calls blk_queue_set_cranges() for a registered queue, e.g. when a device
is revalidated, blk_queue_set_cranges() will execute
blk_register_cranges() to update the queue sysfs attribute files.

The sysfs file structure created starts from the cranges sub-directory
and contains the start sector and number of sectors served by an
actuator, with the information for each actuator grouped in one
directory per actuator. E.g. for a dual actuator drive, we have:

$ tree /sys/block/sdk/queue/cranges/
/sys/block/sdk/queue/cranges/
|-- 0
|   |-- nr_sectors
|   `-- sector
`-- 1
    |-- nr_sectors
    `-- sector

For a regular single actuator device, the cranges directory does not
exist.

Device revalidation may lead to changes to this structure and to the
attribute values. When manipulated, the queue sysfs_lock and
sysfs_dir_lock are held for atomicity, similarly to how the blk-mq and
elevator sysfs queue sub-directories are protected.

The code related to the management of cranges is added in the new
file block/blk-cranges.c.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 block/Makefile         |   2 +-
 block/blk-cranges.c    | 295 +++++++++++++++++++++++++++++++++++++++++
 block/blk-sysfs.c      |  13 ++
 block/blk.h            |   3 +
 include/linux/blkdev.h |  29 ++++
 5 files changed, 341 insertions(+), 1 deletion(-)
 create mode 100644 block/blk-cranges.c

Comments

Hannes Reinecke July 26, 2021, 7:33 a.m. UTC | #1
On 7/26/21 3:38 AM, Damien Le Moal wrote:
> The Concurrent Positioning Ranges VPD page (for SCSI) and Log (for ATA)
> contain parameters describing the number of sets of contiguous LBAs that
> can be served independently by a single LUN multi-actuator disk. This
> patch provides the blk_queue_set_cranges() function allowing a device
> driver to signal to the block layer that a disk has multiple actuators,
> each one serving a contiguous range of sectors. To describe the set
> of sector ranges representing the different actuators of a device, the
> data type struct blk_cranges is introduced.
> 
> For a device with multiple actuators, a struct blk_cranges is attached
> to the device request queue by the blk_queue_set_cranges() function. The
> function blk_alloc_cranges() is provided for drivers to allocate this
> structure.
> 
> The blk_cranges structure contains kobjects (struct kobject) to register
> with sysfs the set of sector ranges defined by a device. On initial
> device scan, this registration is done from blk_register_queue() using
> the block layer internal function blk_register_cranges(). If a driver
> calls blk_queue_set_cranges() for a registered queue, e.g. when a device
> is revalidated, blk_queue_set_cranges() will execute
> blk_register_cranges() to update the queue sysfs attribute files.
> 
> The sysfs file structure created starts from the cranges sub-directory
> and contains the start sector and number of sectors served by an
> actuator, with the information for each actuator grouped in one
> directory per actuator. E.g. for a dual actuator drive, we have:
> 
> $ tree /sys/block/sdk/queue/cranges/
> /sys/block/sdk/queue/cranges/
> |-- 0
> |   |-- nr_sectors
> |   `-- sector
> `-- 1
>      |-- nr_sectors
>      `-- sector
> 
> For a regular single actuator device, the cranges directory does not
> exist.
> 
> Device revalidation may lead to changes to this structure and to the
> attribute values. When manipulated, the queue sysfs_lock and
> sysfs_dir_lock are held for atomicity, similarly to how the blk-mq and
> elevator sysfs queue sub-directories are protected.
> 
> The code related to the management of cranges is added in the new
> file block/blk-cranges.c.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>   block/Makefile         |   2 +-
>   block/blk-cranges.c    | 295 +++++++++++++++++++++++++++++++++++++++++
>   block/blk-sysfs.c      |  13 ++
>   block/blk.h            |   3 +
>   include/linux/blkdev.h |  29 ++++
>   5 files changed, 341 insertions(+), 1 deletion(-)
>   create mode 100644 block/blk-cranges.c
> 
> diff --git a/block/Makefile b/block/Makefile
> index bfbe4e13ca1e..e477e6ca9ea6 100644
> --- a/block/Makefile
> +++ b/block/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
>   			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
>   			blk-mq-sysfs.o blk-mq-cpumap.o blk-mq-sched.o ioctl.o \
>   			genhd.o ioprio.o badblocks.o partitions/ blk-rq-qos.o \
> -			disk-events.o
> +			disk-events.o blk-cranges.o
>   
>   obj-$(CONFIG_BOUNCE)		+= bounce.o
>   obj-$(CONFIG_BLK_SCSI_REQUEST)	+= scsi_ioctl.o
> diff --git a/block/blk-cranges.c b/block/blk-cranges.c
> new file mode 100644
> index 000000000000..deaa09e564f7
> --- /dev/null
> +++ b/block/blk-cranges.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + *  Block device concurrent positioning ranges.
> + *
> + *  Copyright (C) 2021 Western Digital Corporation or its Affiliates.
> + */
> +#include <linux/kernel.h>
> +#include <linux/blkdev.h>
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +
> +#include "blk.h"
> +
> +static ssize_t blk_crange_sector_show(struct blk_crange *cr, char *page)
> +{
> +	return sprintf(page, "%llu\n", cr->sector);
> +}
> +
> +static ssize_t blk_crange_nr_sectors_show(struct blk_crange *cr, char *page)
> +{
> +	return sprintf(page, "%llu\n", cr->nr_sectors);
> +}
> +
> +struct blk_crange_sysfs_entry {
> +	struct attribute attr;
> +	ssize_t (*show)(struct blk_crange *cr, char *page);
> +};
> +
> +static struct blk_crange_sysfs_entry blk_crange_sector_entry = {
> +	.attr = { .name = "sector", .mode = 0444 },
> +	.show = blk_crange_sector_show,
> +};
> +
> +static struct blk_crange_sysfs_entry blk_crange_nr_sectors_entry = {
> +	.attr = { .name = "nr_sectors", .mode = 0444 },
> +	.show = blk_crange_nr_sectors_show,
> +};
> +
> +static struct attribute *blk_crange_attrs[] = {
> +	&blk_crange_sector_entry.attr,
> +	&blk_crange_nr_sectors_entry.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(blk_crange);
> +
> +static ssize_t blk_crange_sysfs_show(struct kobject *kobj,
> +				     struct attribute *attr, char *page)
> +{
> +	struct blk_crange_sysfs_entry *entry;
> +	struct blk_crange *cr;
> +	struct request_queue *q;
> +	ssize_t ret;
> +
> +	entry = container_of(attr, struct blk_crange_sysfs_entry, attr);
> +	cr = container_of(kobj, struct blk_crange, kobj);
> +	q = cr->queue;
> +
> +	mutex_lock(&q->sysfs_lock);
> +	ret = entry->show(cr, page);
> +	mutex_unlock(&q->sysfs_lock);
> +
> +	return ret;
> +}
> +
> +static const struct sysfs_ops blk_crange_sysfs_ops = {
> +	.show	= blk_crange_sysfs_show,
> +};
> +
> +/*
> + * Dummy release function to make kobj happy.
> + */
> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
> +{
> +}
> +
> +static struct kobj_type blk_crange_ktype = {
> +	.sysfs_ops	= &blk_crange_sysfs_ops,
> +	.default_groups	= blk_crange_groups,
> +	.release	= blk_cranges_sysfs_nop_release,
> +};
> +
> +static struct kobj_type blk_cranges_ktype = {
> +	.release	= blk_cranges_sysfs_nop_release,
> +};
> +
> +/**
> + * blk_register_cranges - register with sysfs a set of concurrent ranges
> + * @disk:		Target disk
> + * @new_cranges:	New set of concurrent ranges
> + *
> + * Register with sysfs a set of concurrent ranges for @disk. If @new_cranges
> + * is not NULL, this set of concurrent ranges is registered and the
> + * old set specified by q->cranges is unregistered. Otherwise, q->cranges
> + * is registered if it is not already.
> + */
> +int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges)
> +{
> +	struct request_queue *q = disk->queue;
> +	struct blk_cranges *cranges;
> +	int i, ret;
> +
> +	lockdep_assert_held(&q->sysfs_dir_lock);
> +	lockdep_assert_held(&q->sysfs_lock);
> +
> +	/* If a new range set is specified, unregister the old one */
> +	if (new_cranges) {
> +		if (q->cranges)
> +			blk_unregister_cranges(disk);
> +		q->cranges = new_cranges;
> +	}
> +
> +	cranges = q->cranges;
> +	if (!cranges)
> +		return 0;
> +
> +	/*
> +	 * At this point, q->cranges is the new set of sector ranges that needs
> +	 * to be registered with sysfs.
> +	 */
> +	WARN_ON(cranges->sysfs_registered);
> +	ret = kobject_init_and_add(&cranges->kobj, &blk_cranges_ktype,
> +				   &q->kobj, "%s", "cranges");
> +	if (ret)
> +		goto free;
> +
> +	for (i = 0; i < cranges->nr_ranges; i++) {
> +		cranges->ranges[i].queue = q;
> +		ret = kobject_init_and_add(&cranges->ranges[i].kobj,
> +					   &blk_crange_ktype, &cranges->kobj,
> +					   "%d", i);
> +		if (ret)
> +			goto delete_obj;
> +	}
> +
> +	cranges->sysfs_registered = true;
> +
> +	return 0;
> +
> +delete_obj:
> +	while (--i >= 0)
> +		kobject_del(&cranges->ranges[i].kobj);
> +	kobject_del(&cranges->kobj);
> +free:
> +	kfree(cranges);
> +	q->cranges = NULL;
> +	return ret;
> +}
> +
> +void blk_unregister_cranges(struct gendisk *disk)
> +{
> +	struct request_queue *q = disk->queue;
> +	struct blk_cranges *cranges = q->cranges;
> +	int i;
> +
> +	lockdep_assert_held(&q->sysfs_dir_lock);
> +	lockdep_assert_held(&q->sysfs_lock);
> +
> +	if (!cranges)
> +		return;
> +
> +	if (cranges->sysfs_registered) {
> +		for (i = 0; i < cranges->nr_ranges; i++)
> +			kobject_del(&cranges->ranges[i].kobj);
> +		kobject_del(&cranges->kobj);
> +	}
> +
> +	kfree(cranges);
> +	q->cranges = NULL;
> +}
> +
> +static bool blk_check_ranges(struct gendisk *disk, struct blk_cranges *cr)
> +{
> +	sector_t capacity = get_capacity(disk);
> +	sector_t min_sector = (sector_t)-1;
> +	sector_t max_sector = 0;
> +	int i;
> +
> +	/*
> +	 * Sector ranges may overlap but should overall contain all sectors
> +	 * within the disk capacity.
> +	 */
> +	for (i = 0; i < cr->nr_ranges; i++) {
> +		min_sector = min(min_sector, cr->ranges[i].sector);
> +		max_sector = max(max_sector, cr->ranges[i].sector +
> +					     cr->ranges[i].nr_sectors);
> +	}
> +
> +	if (min_sector != 0 || max_sector < capacity) {
> +		pr_warn("Invalid concurrent ranges: missing sectors\n");
> +		return false;
> +	}
> +
> +	if (max_sector > capacity) {
> +		pr_warn("Invalid concurrent ranges: beyond capacity\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
> +static bool blk_cranges_changed(struct gendisk *disk, struct blk_cranges *new)
> +{
> +	struct blk_cranges *old = disk->queue->cranges;
> +	int i;
> +
> +	if (!old)
> +		return true;
> +
> +	if (old->nr_ranges != new->nr_ranges)
> +		return true;
> +
> +	for (i = 0; i < old->nr_ranges; i++) {
> +		if (new->ranges[i].sector != old->ranges[i].sector ||
> +		    new->ranges[i].nr_sectors != old->ranges[i].nr_sectors)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +/**
> + * blk_alloc_cranges - Allocate a concurrent positioning range structure
> + * @disk:	target disk
> + * @nr_ranges:	Number of concurrent ranges
> + *
> + * Allocate a struct blk_cranges structure with @nr_ranges range descriptors.
> + */
> +struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges)
> +{
> +	struct blk_cranges *cr;
> +
> +	cr = kzalloc_node(struct_size(cr, ranges, nr_ranges), GFP_KERNEL,
> +			  disk->queue->node);
> +	if (cr)
> +		cr->nr_ranges = nr_ranges;
> +	return cr;
> +}
> +EXPORT_SYMBOL_GPL(blk_alloc_cranges);
> +
> +/**
> + * blk_queue_set_cranges - Set a disk concurrent positioning ranges
> + * @disk:	target disk
> + * @cr:		concurrent ranges structure
> + *
> + * Set the concurrant positioning ranges information of the request queue
> + * of @disk to @cr. If @cr is NULL and the concurrent ranges structure
> + * already set, if any, is cleared. If there are no differences between
> + * @cr and the concurrent ranges structure already set, @cr is freed.
> + */
> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
> +{
> +	struct request_queue *q = disk->queue;
> +
> +	if (WARN_ON_ONCE(cr && !cr->nr_ranges)) {
> +		kfree(cr);
> +		cr = NULL;
> +	}
> +
> +	mutex_lock(&q->sysfs_dir_lock);
> +	mutex_lock(&q->sysfs_lock);
> +
> +	if (cr) {
> +		if (!blk_check_ranges(disk, cr)) {
> +			kfree(cr);
> +			cr = NULL;
> +			goto reg;
> +		}
> +
> +		if (!blk_cranges_changed(disk, cr)) {
> +			kfree(cr);
> +			goto unlock;
> +		}
> +	}
> +
> +	/*
> +	 * This may be called for a registered queue. E.g. during a device
> +	 * revalidation. If that is the case, we need to unregister the old
> +	 * set of concurrent ranges and register the new set. If the queue
> +	 * is not registered, the device request queue registration will
> +	 * register the ranges, so only swap in the new set and free the
> +	 * old one.
> +	 */
> +reg:
> +	if (blk_queue_registered(q)) {
> +		blk_register_cranges(disk, cr);
> +	} else {
> +		swap(q->cranges, cr);
> +		kfree(cr);
> +	}
> +
> +unlock:
> +	mutex_unlock(&q->sysfs_lock);
> +	mutex_unlock(&q->sysfs_dir_lock);
> +}
> +EXPORT_SYMBOL_GPL(blk_queue_set_cranges);
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 370d83c18057..aeac98ecc5a0 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -899,9 +899,21 @@ int blk_register_queue(struct gendisk *disk)
>   	}
>   
>   	mutex_lock(&q->sysfs_lock);
> +
> +	ret = blk_register_cranges(disk, NULL);
> +	if (ret) {
> +		mutex_unlock(&q->sysfs_lock);
> +		mutex_unlock(&q->sysfs_dir_lock);
> +		kobject_del(&q->kobj);
> +		blk_trace_remove_sysfs(dev);
> +		kobject_put(&dev->kobj);
> +		return ret;
> +	}
> +
>   	if (q->elevator) {
>   		ret = elv_register_queue(q, false);
>   		if (ret) {
> +			blk_unregister_cranges(disk);
>   			mutex_unlock(&q->sysfs_lock);
>   			mutex_unlock(&q->sysfs_dir_lock);
>   			kobject_del(&q->kobj);
> @@ -985,6 +997,7 @@ void blk_unregister_queue(struct gendisk *disk)
>   	mutex_lock(&q->sysfs_lock);
>   	if (q->elevator)
>   		elv_unregister_queue(q);
> +	blk_unregister_cranges(disk);
>   	mutex_unlock(&q->sysfs_lock);
>   	mutex_unlock(&q->sysfs_dir_lock);
>   
> diff --git a/block/blk.h b/block/blk.h
> index 4b885c0f6708..650c0d87987c 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -368,4 +368,7 @@ extern struct device_attribute dev_attr_events;
>   extern struct device_attribute dev_attr_events_async;
>   extern struct device_attribute dev_attr_events_poll_msecs;
>   
> +int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges);
> +void blk_unregister_cranges(struct gendisk *disk);
> +
>   #endif /* BLK_INTERNAL_H */
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index d3afea47ade6..d10352674d20 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -378,6 +378,29 @@ static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev,
>   
>   #endif /* CONFIG_BLK_DEV_ZONED */
>   
> +/*
> + * Concurrent sector ranges: struct blk_crange describes range of
> + * contiguous sectors that can be served by independent resources on the
> + * device. The set of ranges defined in struct blk_cranges must overall
> + * include all sectors within the device capacity.
> + * For a device with multiple ranges, e.g. a single LUN multi-actuator HDD,
> + * requests targeting sectors in different ranges can be executed in parallel.
> + * A request can straddle a range boundary.
> + */
> +struct blk_crange {
> +	struct kobject		kobj;
> +	struct request_queue	*queue;
> +	sector_t		sector;
> +	sector_t		nr_sectors;
> +};
> +
> +struct blk_cranges {
> +	struct kobject		kobj;
> +	bool			sysfs_registered;
> +	unsigned int		nr_ranges;
> +	struct blk_crange	ranges[];
> +};
> +
>   struct request_queue {
>   	struct request		*last_merge;
>   	struct elevator_queue	*elevator;
> @@ -570,6 +593,9 @@ struct request_queue {
>   
>   #define BLK_MAX_WRITE_HINTS	5
>   	u64			write_hints[BLK_MAX_WRITE_HINTS];
> +
> +	/* Concurrent sector ranges */
> +	struct blk_cranges	*cranges;
>   };
>   
>   /* Keep blk_queue_flag_name[] in sync with the definitions below */
> @@ -1163,6 +1189,9 @@ extern void blk_queue_required_elevator_features(struct request_queue *q,
>   extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
>   					      struct device *dev);
>   
> +struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges);
> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr);
> +
>   /*
>    * Number of physical segments as sent to the device.
>    *
> 
In principle it looks good, but what would be the appropriate action 
when invalid ranges are being detected during revalidation?
The current code will leave the original ones intact, but I guess that's 
questionable as the current settings are most likely invalid.
I would vote for de-register the old ones and implement an error state 
(using an error pointer?); that would signal that there _are_ ranges, 
but we couldn't parse them properly.
Hmm?

Cheers,

Hannes
Damien Le Moal July 26, 2021, 8:30 a.m. UTC | #2
On 2021/07/26 16:34, Hannes Reinecke wrote:
> On 7/26/21 3:38 AM, Damien Le Moal wrote:
>> The Concurrent Positioning Ranges VPD page (for SCSI) and Log (for ATA)
>> contain parameters describing the number of sets of contiguous LBAs that
>> can be served independently by a single LUN multi-actuator disk. This
>> patch provides the blk_queue_set_cranges() function allowing a device
>> driver to signal to the block layer that a disk has multiple actuators,
>> each one serving a contiguous range of sectors. To describe the set
>> of sector ranges representing the different actuators of a device, the
>> data type struct blk_cranges is introduced.
>>
>> For a device with multiple actuators, a struct blk_cranges is attached
>> to the device request queue by the blk_queue_set_cranges() function. The
>> function blk_alloc_cranges() is provided for drivers to allocate this
>> structure.
>>
>> The blk_cranges structure contains kobjects (struct kobject) to register
>> with sysfs the set of sector ranges defined by a device. On initial
>> device scan, this registration is done from blk_register_queue() using
>> the block layer internal function blk_register_cranges(). If a driver
>> calls blk_queue_set_cranges() for a registered queue, e.g. when a device
>> is revalidated, blk_queue_set_cranges() will execute
>> blk_register_cranges() to update the queue sysfs attribute files.
>>
>> The sysfs file structure created starts from the cranges sub-directory
>> and contains the start sector and number of sectors served by an
>> actuator, with the information for each actuator grouped in one
>> directory per actuator. E.g. for a dual actuator drive, we have:
>>
>> $ tree /sys/block/sdk/queue/cranges/
>> /sys/block/sdk/queue/cranges/
>> |-- 0
>> |   |-- nr_sectors
>> |   `-- sector
>> `-- 1
>>      |-- nr_sectors
>>      `-- sector
>>
>> For a regular single actuator device, the cranges directory does not
>> exist.
>>
>> Device revalidation may lead to changes to this structure and to the
>> attribute values. When manipulated, the queue sysfs_lock and
>> sysfs_dir_lock are held for atomicity, similarly to how the blk-mq and
>> elevator sysfs queue sub-directories are protected.
>>
>> The code related to the management of cranges is added in the new
>> file block/blk-cranges.c.
>>
>> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
>> ---
>>   block/Makefile         |   2 +-
>>   block/blk-cranges.c    | 295 +++++++++++++++++++++++++++++++++++++++++
>>   block/blk-sysfs.c      |  13 ++
>>   block/blk.h            |   3 +
>>   include/linux/blkdev.h |  29 ++++
>>   5 files changed, 341 insertions(+), 1 deletion(-)
>>   create mode 100644 block/blk-cranges.c
>>
>> diff --git a/block/Makefile b/block/Makefile
>> index bfbe4e13ca1e..e477e6ca9ea6 100644
>> --- a/block/Makefile
>> +++ b/block/Makefile
>> @@ -9,7 +9,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
>>   			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
>>   			blk-mq-sysfs.o blk-mq-cpumap.o blk-mq-sched.o ioctl.o \
>>   			genhd.o ioprio.o badblocks.o partitions/ blk-rq-qos.o \
>> -			disk-events.o
>> +			disk-events.o blk-cranges.o
>>   
>>   obj-$(CONFIG_BOUNCE)		+= bounce.o
>>   obj-$(CONFIG_BLK_SCSI_REQUEST)	+= scsi_ioctl.o
>> diff --git a/block/blk-cranges.c b/block/blk-cranges.c
>> new file mode 100644
>> index 000000000000..deaa09e564f7
>> --- /dev/null
>> +++ b/block/blk-cranges.c
>> @@ -0,0 +1,295 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + *  Block device concurrent positioning ranges.
>> + *
>> + *  Copyright (C) 2021 Western Digital Corporation or its Affiliates.
>> + */
>> +#include <linux/kernel.h>
>> +#include <linux/blkdev.h>
>> +#include <linux/slab.h>
>> +#include <linux/init.h>
>> +
>> +#include "blk.h"
>> +
>> +static ssize_t blk_crange_sector_show(struct blk_crange *cr, char *page)
>> +{
>> +	return sprintf(page, "%llu\n", cr->sector);
>> +}
>> +
>> +static ssize_t blk_crange_nr_sectors_show(struct blk_crange *cr, char *page)
>> +{
>> +	return sprintf(page, "%llu\n", cr->nr_sectors);
>> +}
>> +
>> +struct blk_crange_sysfs_entry {
>> +	struct attribute attr;
>> +	ssize_t (*show)(struct blk_crange *cr, char *page);
>> +};
>> +
>> +static struct blk_crange_sysfs_entry blk_crange_sector_entry = {
>> +	.attr = { .name = "sector", .mode = 0444 },
>> +	.show = blk_crange_sector_show,
>> +};
>> +
>> +static struct blk_crange_sysfs_entry blk_crange_nr_sectors_entry = {
>> +	.attr = { .name = "nr_sectors", .mode = 0444 },
>> +	.show = blk_crange_nr_sectors_show,
>> +};
>> +
>> +static struct attribute *blk_crange_attrs[] = {
>> +	&blk_crange_sector_entry.attr,
>> +	&blk_crange_nr_sectors_entry.attr,
>> +	NULL,
>> +};
>> +ATTRIBUTE_GROUPS(blk_crange);
>> +
>> +static ssize_t blk_crange_sysfs_show(struct kobject *kobj,
>> +				     struct attribute *attr, char *page)
>> +{
>> +	struct blk_crange_sysfs_entry *entry;
>> +	struct blk_crange *cr;
>> +	struct request_queue *q;
>> +	ssize_t ret;
>> +
>> +	entry = container_of(attr, struct blk_crange_sysfs_entry, attr);
>> +	cr = container_of(kobj, struct blk_crange, kobj);
>> +	q = cr->queue;
>> +
>> +	mutex_lock(&q->sysfs_lock);
>> +	ret = entry->show(cr, page);
>> +	mutex_unlock(&q->sysfs_lock);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct sysfs_ops blk_crange_sysfs_ops = {
>> +	.show	= blk_crange_sysfs_show,
>> +};
>> +
>> +/*
>> + * Dummy release function to make kobj happy.
>> + */
>> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
>> +{
>> +}
>> +
>> +static struct kobj_type blk_crange_ktype = {
>> +	.sysfs_ops	= &blk_crange_sysfs_ops,
>> +	.default_groups	= blk_crange_groups,
>> +	.release	= blk_cranges_sysfs_nop_release,
>> +};
>> +
>> +static struct kobj_type blk_cranges_ktype = {
>> +	.release	= blk_cranges_sysfs_nop_release,
>> +};
>> +
>> +/**
>> + * blk_register_cranges - register with sysfs a set of concurrent ranges
>> + * @disk:		Target disk
>> + * @new_cranges:	New set of concurrent ranges
>> + *
>> + * Register with sysfs a set of concurrent ranges for @disk. If @new_cranges
>> + * is not NULL, this set of concurrent ranges is registered and the
>> + * old set specified by q->cranges is unregistered. Otherwise, q->cranges
>> + * is registered if it is not already.
>> + */
>> +int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges)
>> +{
>> +	struct request_queue *q = disk->queue;
>> +	struct blk_cranges *cranges;
>> +	int i, ret;
>> +
>> +	lockdep_assert_held(&q->sysfs_dir_lock);
>> +	lockdep_assert_held(&q->sysfs_lock);
>> +
>> +	/* If a new range set is specified, unregister the old one */
>> +	if (new_cranges) {
>> +		if (q->cranges)
>> +			blk_unregister_cranges(disk);
>> +		q->cranges = new_cranges;
>> +	}
>> +
>> +	cranges = q->cranges;
>> +	if (!cranges)
>> +		return 0;
>> +
>> +	/*
>> +	 * At this point, q->cranges is the new set of sector ranges that needs
>> +	 * to be registered with sysfs.
>> +	 */
>> +	WARN_ON(cranges->sysfs_registered);
>> +	ret = kobject_init_and_add(&cranges->kobj, &blk_cranges_ktype,
>> +				   &q->kobj, "%s", "cranges");
>> +	if (ret)
>> +		goto free;
>> +
>> +	for (i = 0; i < cranges->nr_ranges; i++) {
>> +		cranges->ranges[i].queue = q;
>> +		ret = kobject_init_and_add(&cranges->ranges[i].kobj,
>> +					   &blk_crange_ktype, &cranges->kobj,
>> +					   "%d", i);
>> +		if (ret)
>> +			goto delete_obj;
>> +	}
>> +
>> +	cranges->sysfs_registered = true;
>> +
>> +	return 0;
>> +
>> +delete_obj:
>> +	while (--i >= 0)
>> +		kobject_del(&cranges->ranges[i].kobj);
>> +	kobject_del(&cranges->kobj);
>> +free:
>> +	kfree(cranges);
>> +	q->cranges = NULL;
>> +	return ret;
>> +}
>> +
>> +void blk_unregister_cranges(struct gendisk *disk)
>> +{
>> +	struct request_queue *q = disk->queue;
>> +	struct blk_cranges *cranges = q->cranges;
>> +	int i;
>> +
>> +	lockdep_assert_held(&q->sysfs_dir_lock);
>> +	lockdep_assert_held(&q->sysfs_lock);
>> +
>> +	if (!cranges)
>> +		return;
>> +
>> +	if (cranges->sysfs_registered) {
>> +		for (i = 0; i < cranges->nr_ranges; i++)
>> +			kobject_del(&cranges->ranges[i].kobj);
>> +		kobject_del(&cranges->kobj);
>> +	}
>> +
>> +	kfree(cranges);
>> +	q->cranges = NULL;
>> +}
>> +
>> +static bool blk_check_ranges(struct gendisk *disk, struct blk_cranges *cr)
>> +{
>> +	sector_t capacity = get_capacity(disk);
>> +	sector_t min_sector = (sector_t)-1;
>> +	sector_t max_sector = 0;
>> +	int i;
>> +
>> +	/*
>> +	 * Sector ranges may overlap but should overall contain all sectors
>> +	 * within the disk capacity.
>> +	 */
>> +	for (i = 0; i < cr->nr_ranges; i++) {
>> +		min_sector = min(min_sector, cr->ranges[i].sector);
>> +		max_sector = max(max_sector, cr->ranges[i].sector +
>> +					     cr->ranges[i].nr_sectors);
>> +	}
>> +
>> +	if (min_sector != 0 || max_sector < capacity) {
>> +		pr_warn("Invalid concurrent ranges: missing sectors\n");
>> +		return false;
>> +	}
>> +
>> +	if (max_sector > capacity) {
>> +		pr_warn("Invalid concurrent ranges: beyond capacity\n");
>> +		return false;
>> +	}
>> +
>> +	return true;
>> +}
>> +
>> +static bool blk_cranges_changed(struct gendisk *disk, struct blk_cranges *new)
>> +{
>> +	struct blk_cranges *old = disk->queue->cranges;
>> +	int i;
>> +
>> +	if (!old)
>> +		return true;
>> +
>> +	if (old->nr_ranges != new->nr_ranges)
>> +		return true;
>> +
>> +	for (i = 0; i < old->nr_ranges; i++) {
>> +		if (new->ranges[i].sector != old->ranges[i].sector ||
>> +		    new->ranges[i].nr_sectors != old->ranges[i].nr_sectors)
>> +			return true;
>> +	}
>> +
>> +	return false;
>> +}
>> +
>> +/**
>> + * blk_alloc_cranges - Allocate a concurrent positioning range structure
>> + * @disk:	target disk
>> + * @nr_ranges:	Number of concurrent ranges
>> + *
>> + * Allocate a struct blk_cranges structure with @nr_ranges range descriptors.
>> + */
>> +struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges)
>> +{
>> +	struct blk_cranges *cr;
>> +
>> +	cr = kzalloc_node(struct_size(cr, ranges, nr_ranges), GFP_KERNEL,
>> +			  disk->queue->node);
>> +	if (cr)
>> +		cr->nr_ranges = nr_ranges;
>> +	return cr;
>> +}
>> +EXPORT_SYMBOL_GPL(blk_alloc_cranges);
>> +
>> +/**
>> + * blk_queue_set_cranges - Set a disk concurrent positioning ranges
>> + * @disk:	target disk
>> + * @cr:		concurrent ranges structure
>> + *
>> + * Set the concurrant positioning ranges information of the request queue
>> + * of @disk to @cr. If @cr is NULL and the concurrent ranges structure
>> + * already set, if any, is cleared. If there are no differences between
>> + * @cr and the concurrent ranges structure already set, @cr is freed.
>> + */
>> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
>> +{
>> +	struct request_queue *q = disk->queue;
>> +
>> +	if (WARN_ON_ONCE(cr && !cr->nr_ranges)) {
>> +		kfree(cr);
>> +		cr = NULL;
>> +	}
>> +
>> +	mutex_lock(&q->sysfs_dir_lock);
>> +	mutex_lock(&q->sysfs_lock);
>> +
>> +	if (cr) {
>> +		if (!blk_check_ranges(disk, cr)) {
>> +			kfree(cr);
>> +			cr = NULL;
>> +			goto reg;
>> +		}
>> +
>> +		if (!blk_cranges_changed(disk, cr)) {
>> +			kfree(cr);
>> +			goto unlock;
>> +		}
>> +	}
>> +
>> +	/*
>> +	 * This may be called for a registered queue. E.g. during a device
>> +	 * revalidation. If that is the case, we need to unregister the old
>> +	 * set of concurrent ranges and register the new set. If the queue
>> +	 * is not registered, the device request queue registration will
>> +	 * register the ranges, so only swap in the new set and free the
>> +	 * old one.
>> +	 */
>> +reg:
>> +	if (blk_queue_registered(q)) {
>> +		blk_register_cranges(disk, cr);
>> +	} else {
>> +		swap(q->cranges, cr);
>> +		kfree(cr);
>> +	}
>> +
>> +unlock:
>> +	mutex_unlock(&q->sysfs_lock);
>> +	mutex_unlock(&q->sysfs_dir_lock);
>> +}
>> +EXPORT_SYMBOL_GPL(blk_queue_set_cranges);
>> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
>> index 370d83c18057..aeac98ecc5a0 100644
>> --- a/block/blk-sysfs.c
>> +++ b/block/blk-sysfs.c
>> @@ -899,9 +899,21 @@ int blk_register_queue(struct gendisk *disk)
>>   	}
>>   
>>   	mutex_lock(&q->sysfs_lock);
>> +
>> +	ret = blk_register_cranges(disk, NULL);
>> +	if (ret) {
>> +		mutex_unlock(&q->sysfs_lock);
>> +		mutex_unlock(&q->sysfs_dir_lock);
>> +		kobject_del(&q->kobj);
>> +		blk_trace_remove_sysfs(dev);
>> +		kobject_put(&dev->kobj);
>> +		return ret;
>> +	}
>> +
>>   	if (q->elevator) {
>>   		ret = elv_register_queue(q, false);
>>   		if (ret) {
>> +			blk_unregister_cranges(disk);
>>   			mutex_unlock(&q->sysfs_lock);
>>   			mutex_unlock(&q->sysfs_dir_lock);
>>   			kobject_del(&q->kobj);
>> @@ -985,6 +997,7 @@ void blk_unregister_queue(struct gendisk *disk)
>>   	mutex_lock(&q->sysfs_lock);
>>   	if (q->elevator)
>>   		elv_unregister_queue(q);
>> +	blk_unregister_cranges(disk);
>>   	mutex_unlock(&q->sysfs_lock);
>>   	mutex_unlock(&q->sysfs_dir_lock);
>>   
>> diff --git a/block/blk.h b/block/blk.h
>> index 4b885c0f6708..650c0d87987c 100644
>> --- a/block/blk.h
>> +++ b/block/blk.h
>> @@ -368,4 +368,7 @@ extern struct device_attribute dev_attr_events;
>>   extern struct device_attribute dev_attr_events_async;
>>   extern struct device_attribute dev_attr_events_poll_msecs;
>>   
>> +int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges);
>> +void blk_unregister_cranges(struct gendisk *disk);
>> +
>>   #endif /* BLK_INTERNAL_H */
>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>> index d3afea47ade6..d10352674d20 100644
>> --- a/include/linux/blkdev.h
>> +++ b/include/linux/blkdev.h
>> @@ -378,6 +378,29 @@ static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev,
>>   
>>   #endif /* CONFIG_BLK_DEV_ZONED */
>>   
>> +/*
>> + * Concurrent sector ranges: struct blk_crange describes range of
>> + * contiguous sectors that can be served by independent resources on the
>> + * device. The set of ranges defined in struct blk_cranges must overall
>> + * include all sectors within the device capacity.
>> + * For a device with multiple ranges, e.g. a single LUN multi-actuator HDD,
>> + * requests targeting sectors in different ranges can be executed in parallel.
>> + * A request can straddle a range boundary.
>> + */
>> +struct blk_crange {
>> +	struct kobject		kobj;
>> +	struct request_queue	*queue;
>> +	sector_t		sector;
>> +	sector_t		nr_sectors;
>> +};
>> +
>> +struct blk_cranges {
>> +	struct kobject		kobj;
>> +	bool			sysfs_registered;
>> +	unsigned int		nr_ranges;
>> +	struct blk_crange	ranges[];
>> +};
>> +
>>   struct request_queue {
>>   	struct request		*last_merge;
>>   	struct elevator_queue	*elevator;
>> @@ -570,6 +593,9 @@ struct request_queue {
>>   
>>   #define BLK_MAX_WRITE_HINTS	5
>>   	u64			write_hints[BLK_MAX_WRITE_HINTS];
>> +
>> +	/* Concurrent sector ranges */
>> +	struct blk_cranges	*cranges;
>>   };
>>   
>>   /* Keep blk_queue_flag_name[] in sync with the definitions below */
>> @@ -1163,6 +1189,9 @@ extern void blk_queue_required_elevator_features(struct request_queue *q,
>>   extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
>>   					      struct device *dev);
>>   
>> +struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges);
>> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr);
>> +
>>   /*
>>    * Number of physical segments as sent to the device.
>>    *
>>
> In principle it looks good, but what would be the appropriate action 
> when invalid ranges are being detected during revalidation?
> The current code will leave the original ones intact, but I guess that's 
> questionable as the current settings are most likely invalid.

Nope. In that case, the old ranges are removed. In blk_queue_set_cranges(),
there is:

+		if (!blk_check_ranges(disk, cr)) {
+			kfree(cr);
+			cr = NULL;
+			goto reg;
+		}

So for incorrect ranges, we will register "NULL", so no ranges. The old ranges
are gone.

> I would vote for de-register the old ones and implement an error state 
> (using an error pointer?); that would signal that there _are_ ranges, 
> but we couldn't parse them properly.
> Hmm?

With the current code, the information "there are ranges" will be completely
gone if the ranges are bad... dmesg will have a message about it, but that's it.


> 
> Cheers,
> 
> Hannes
>
Hannes Reinecke July 26, 2021, 8:47 a.m. UTC | #3
On 7/26/21 10:30 AM, Damien Le Moal wrote:
> On 2021/07/26 16:34, Hannes Reinecke wrote:
[ .. ]
>> In principle it looks good, but what would be the appropriate action
>> when invalid ranges are being detected during revalidation?
>> The current code will leave the original ones intact, but I guess that's
>> questionable as the current settings are most likely invalid.
> 
> Nope. In that case, the old ranges are removed. In blk_queue_set_cranges(),
> there is:
> 
> +		if (!blk_check_ranges(disk, cr)) {
> +			kfree(cr);
> +			cr = NULL;
> +			goto reg;
> +		}
> 
> So for incorrect ranges, we will register "NULL", so no ranges. The old ranges
> are gone.
> 

Right. So that's the first concern addressed.

>> I would vote for de-register the old ones and implement an error state
>> (using an error pointer?); that would signal that there _are_ ranges,
>> but we couldn't parse them properly.
>> Hmm?
> 
> With the current code, the information "there are ranges" will be completely
> gone if the ranges are bad... dmesg will have a message about it, but that's it.
> 
So there will be no additional information in sysfs in case of incorrect 
ranges?

Hmm. Not sure if I like that, but then it might be the best option after 
all. So you can add my:

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
Damien Le Moal July 26, 2021, 11:33 a.m. UTC | #4
On 2021/07/26 17:47, Hannes Reinecke wrote:
> On 7/26/21 10:30 AM, Damien Le Moal wrote:
>> On 2021/07/26 16:34, Hannes Reinecke wrote:
> [ .. ]
>>> In principle it looks good, but what would be the appropriate action
>>> when invalid ranges are being detected during revalidation?
>>> The current code will leave the original ones intact, but I guess that's
>>> questionable as the current settings are most likely invalid.
>>
>> Nope. In that case, the old ranges are removed. In blk_queue_set_cranges(),
>> there is:
>>
>> +		if (!blk_check_ranges(disk, cr)) {
>> +			kfree(cr);
>> +			cr = NULL;
>> +			goto reg;
>> +		}
>>
>> So for incorrect ranges, we will register "NULL", so no ranges. The old ranges
>> are gone.
>>
> 
> Right. So that's the first concern addressed.

Not that at the scsi layer, if there is an error retrieving the ranges
informations, blk_queue_set_cranges(q, NULL) is called, so the same happen: the
ranges set are removed and no range information will appear in sysfs.

> 
>>> I would vote for de-register the old ones and implement an error state
>>> (using an error pointer?); that would signal that there _are_ ranges,
>>> but we couldn't parse them properly.
>>> Hmm?
>>
>> With the current code, the information "there are ranges" will be completely
>> gone if the ranges are bad... dmesg will have a message about it, but that's it.
>>
> So there will be no additional information in sysfs in case of incorrect 
> ranges?

Yep, there will be no queue/cranges directory. The drive will be the same as a
single actuator one.

> Hmm. Not sure if I like that, but then it might be the best option after 
> all. So you can add my:

Nothing much that we can do. If we fail to retrieve the ranges, or the ranges
are incorrect, access optimization by FS or scheduler is not really possible.
Note that the drive will still work. Only any eventual optimization will be
turned off.

> Reviewed-by: Hannes Reinecke <hare@suse.de>

Thanks !

> 
> Cheers,
> 
> Hannes
>
Paolo Valente July 27, 2021, 2:07 p.m. UTC | #5
> Il giorno 26 lug 2021, alle ore 13:33, Damien Le Moal <Damien.LeMoal@wdc.com> ha scritto:
> 
> On 2021/07/26 17:47, Hannes Reinecke wrote:
>> On 7/26/21 10:30 AM, Damien Le Moal wrote:
>>> On 2021/07/26 16:34, Hannes Reinecke wrote:
>> [ .. ]
>>>> In principle it looks good, but what would be the appropriate action
>>>> when invalid ranges are being detected during revalidation?
>>>> The current code will leave the original ones intact, but I guess that's
>>>> questionable as the current settings are most likely invalid.
>>> 
>>> Nope. In that case, the old ranges are removed. In blk_queue_set_cranges(),
>>> there is:
>>> 
>>> +		if (!blk_check_ranges(disk, cr)) {
>>> +			kfree(cr);
>>> +			cr = NULL;
>>> +			goto reg;
>>> +		}
>>> 
>>> So for incorrect ranges, we will register "NULL", so no ranges. The old ranges
>>> are gone.
>>> 
>> 
>> Right. So that's the first concern addressed.
> 
> Not that at the scsi layer, if there is an error retrieving the ranges
> informations, blk_queue_set_cranges(q, NULL) is called, so the same happen: the
> ranges set are removed and no range information will appear in sysfs.
> 

As a very personal opinion, silent failures are often misleading when
trying to understand what is going wrong in a system.  But I guess
this is however the best option.

Thanks,
Paolo

>> 
>>>> I would vote for de-register the old ones and implement an error state
>>>> (using an error pointer?); that would signal that there _are_ ranges,
>>>> but we couldn't parse them properly.
>>>> Hmm?
>>> 
>>> With the current code, the information "there are ranges" will be completely
>>> gone if the ranges are bad... dmesg will have a message about it, but that's it.
>>> 
>> So there will be no additional information in sysfs in case of incorrect 
>> ranges?
> 
> Yep, there will be no queue/cranges directory. The drive will be the same as a
> single actuator one.
> 
>> Hmm. Not sure if I like that, but then it might be the best option after 
>> all. So you can add my:
> 
> Nothing much that we can do. If we fail to retrieve the ranges, or the ranges
> are incorrect, access optimization by FS or scheduler is not really possible.
> Note that the drive will still work. Only any eventual optimization will be
> turned off.
> 
>> Reviewed-by: Hannes Reinecke <hare@suse.de>
> 
> Thanks !
> 
>> 
>> Cheers,
>> 
>> Hannes
>> 
> 
> 
> -- 
> Damien Le Moal
> Western Digital Research
Damien Le Moal July 27, 2021, 11:44 p.m. UTC | #6
On 2021/07/27 23:07, Paolo Valente wrote:
> 
> 
>> Il giorno 26 lug 2021, alle ore 13:33, Damien Le Moal <Damien.LeMoal@wdc.com> ha scritto:
>>
>> On 2021/07/26 17:47, Hannes Reinecke wrote:
>>> On 7/26/21 10:30 AM, Damien Le Moal wrote:
>>>> On 2021/07/26 16:34, Hannes Reinecke wrote:
>>> [ .. ]
>>>>> In principle it looks good, but what would be the appropriate action
>>>>> when invalid ranges are being detected during revalidation?
>>>>> The current code will leave the original ones intact, but I guess that's
>>>>> questionable as the current settings are most likely invalid.
>>>>
>>>> Nope. In that case, the old ranges are removed. In blk_queue_set_cranges(),
>>>> there is:
>>>>
>>>> +		if (!blk_check_ranges(disk, cr)) {
>>>> +			kfree(cr);
>>>> +			cr = NULL;
>>>> +			goto reg;
>>>> +		}
>>>>
>>>> So for incorrect ranges, we will register "NULL", so no ranges. The old ranges
>>>> are gone.
>>>>
>>>
>>> Right. So that's the first concern addressed.
>>
>> Not that at the scsi layer, if there is an error retrieving the ranges
>> informations, blk_queue_set_cranges(q, NULL) is called, so the same happen: the
>> ranges set are removed and no range information will appear in sysfs.
>>
> 
> As a very personal opinion, silent failures are often misleading when
> trying to understand what is going wrong in a system.  But I guess
> this is however the best option.

Failure are not silent: error messages are printed and will be visible in dmesg.

We can always completely ignore the drive and completely fail its initialization
in the case of a failed cranges initialization. But I find that rather extreme
since the drive is supposed to work anyway, even without any access optimization
for the multiple cranges case.

> 
> Thanks,
> Paolo
> 
>>>
>>>>> I would vote for de-register the old ones and implement an error state
>>>>> (using an error pointer?); that would signal that there _are_ ranges,
>>>>> but we couldn't parse them properly.
>>>>> Hmm?
>>>>
>>>> With the current code, the information "there are ranges" will be completely
>>>> gone if the ranges are bad... dmesg will have a message about it, but that's it.
>>>>
>>> So there will be no additional information in sysfs in case of incorrect 
>>> ranges?
>>
>> Yep, there will be no queue/cranges directory. The drive will be the same as a
>> single actuator one.
>>
>>> Hmm. Not sure if I like that, but then it might be the best option after 
>>> all. So you can add my:
>>
>> Nothing much that we can do. If we fail to retrieve the ranges, or the ranges
>> are incorrect, access optimization by FS or scheduler is not really possible.
>> Note that the drive will still work. Only any eventual optimization will be
>> turned off.
>>
>>> Reviewed-by: Hannes Reinecke <hare@suse.de>
>>
>> Thanks !
>>
>>>
>>> Cheers,
>>>
>>> Hannes
>>>
>>
>>
>> -- 
>> Damien Le Moal
>> Western Digital Research
> 
>
Christoph Hellwig Aug. 10, 2021, 8:23 a.m. UTC | #7
On Mon, Jul 26, 2021 at 10:38:03AM +0900, Damien Le Moal wrote:
> The Concurrent Positioning Ranges VPD page (for SCSI) and Log (for ATA)
> contain parameters describing the number of sets of contiguous LBAs that
> can be served independently by a single LUN multi-actuator disk. This
> patch provides the blk_queue_set_cranges() function allowing a device
> driver to signal to the block layer that a disk has multiple actuators,
> each one serving a contiguous range of sectors. To describe the set
> of sector ranges representing the different actuators of a device, the
> data type struct blk_cranges is introduced.
> 
> For a device with multiple actuators, a struct blk_cranges is attached
> to the device request queue by the blk_queue_set_cranges() function. The
> function blk_alloc_cranges() is provided for drivers to allocate this
> structure.
> 
> The blk_cranges structure contains kobjects (struct kobject) to register
> with sysfs the set of sector ranges defined by a device. On initial
> device scan, this registration is done from blk_register_queue() using
> the block layer internal function blk_register_cranges(). If a driver
> calls blk_queue_set_cranges() for a registered queue, e.g. when a device
> is revalidated, blk_queue_set_cranges() will execute
> blk_register_cranges() to update the queue sysfs attribute files.
> 
> The sysfs file structure created starts from the cranges sub-directory
> and contains the start sector and number of sectors served by an
> actuator, with the information for each actuator grouped in one
> directory per actuator. E.g. for a dual actuator drive, we have:
> 
> $ tree /sys/block/sdk/queue/cranges/
> /sys/block/sdk/queue/cranges/
> |-- 0
> |   |-- nr_sectors
> |   `-- sector
> `-- 1
>     |-- nr_sectors
>     `-- sector
> 
> For a regular single actuator device, the cranges directory does not
> exist.
> 
> Device revalidation may lead to changes to this structure and to the
> attribute values. When manipulated, the queue sysfs_lock and
> sysfs_dir_lock are held for atomicity, similarly to how the blk-mq and
> elevator sysfs queue sub-directories are protected.
> 
> The code related to the management of cranges is added in the new
> file block/blk-cranges.c.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  block/Makefile         |   2 +-
>  block/blk-cranges.c    | 295 +++++++++++++++++++++++++++++++++++++++++
>  block/blk-sysfs.c      |  13 ++
>  block/blk.h            |   3 +
>  include/linux/blkdev.h |  29 ++++
>  5 files changed, 341 insertions(+), 1 deletion(-)
>  create mode 100644 block/blk-cranges.c
> 
> diff --git a/block/Makefile b/block/Makefile
> index bfbe4e13ca1e..e477e6ca9ea6 100644
> --- a/block/Makefile
> +++ b/block/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
>  			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
>  			blk-mq-sysfs.o blk-mq-cpumap.o blk-mq-sched.o ioctl.o \
>  			genhd.o ioprio.o badblocks.o partitions/ blk-rq-qos.o \
> -			disk-events.o
> +			disk-events.o blk-cranges.o
>  
>  obj-$(CONFIG_BOUNCE)		+= bounce.o
>  obj-$(CONFIG_BLK_SCSI_REQUEST)	+= scsi_ioctl.o
> diff --git a/block/blk-cranges.c b/block/blk-cranges.c
> new file mode 100644
> index 000000000000..deaa09e564f7
> --- /dev/null
> +++ b/block/blk-cranges.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + *  Block device concurrent positioning ranges.
> + *
> + *  Copyright (C) 2021 Western Digital Corporation or its Affiliates.
> + */
> +#include <linux/kernel.h>
> +#include <linux/blkdev.h>
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +
> +#include "blk.h"
> +
> +static ssize_t blk_crange_sector_show(struct blk_crange *cr, char *page)
> +{
> +	return sprintf(page, "%llu\n", cr->sector);
> +}
> +
> +static ssize_t blk_crange_nr_sectors_show(struct blk_crange *cr, char *page)
> +{
> +	return sprintf(page, "%llu\n", cr->nr_sectors);
> +}
> +
> +struct blk_crange_sysfs_entry {
> +	struct attribute attr;
> +	ssize_t (*show)(struct blk_crange *cr, char *page);
> +};
> +
> +static struct blk_crange_sysfs_entry blk_crange_sector_entry = {
> +	.attr = { .name = "sector", .mode = 0444 },
> +	.show = blk_crange_sector_show,
> +};
> +
> +static struct blk_crange_sysfs_entry blk_crange_nr_sectors_entry = {
> +	.attr = { .name = "nr_sectors", .mode = 0444 },
> +	.show = blk_crange_nr_sectors_show,
> +};
> +
> +static struct attribute *blk_crange_attrs[] = {
> +	&blk_crange_sector_entry.attr,
> +	&blk_crange_nr_sectors_entry.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(blk_crange);
> +
> +static ssize_t blk_crange_sysfs_show(struct kobject *kobj,
> +				     struct attribute *attr, char *page)
> +{
> +	struct blk_crange_sysfs_entry *entry;
> +	struct blk_crange *cr;
> +	struct request_queue *q;
> +	ssize_t ret;
> +
> +	entry = container_of(attr, struct blk_crange_sysfs_entry, attr);
> +	cr = container_of(kobj, struct blk_crange, kobj);
> +	q = cr->queue;

Nit: I'd find this a little eaier to read if the variables were
initialized at declaration time:

	struct blk_crange_sysfs_entry *entry =
		container_of(attr, struct blk_crange_sysfs_entry, attr);
	struct blk_crange *cr = container_of(kobj, struct blk_crange, kobj);
	struct request_queue *q = cr->queue;

(or maybe even don't bother with the q local variable).

> +/*
> + * Dummy release function to make kobj happy.
> + */
> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
> +{
> +}

How do we ensure the kobj is still alive while it is accessed?

> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)

s/blk_queue/disk/

>  	mutex_lock(&q->sysfs_lock);
> +
> +	ret = blk_register_cranges(disk, NULL);
> +	if (ret) {
> +		mutex_unlock(&q->sysfs_lock);
> +		mutex_unlock(&q->sysfs_dir_lock);
> +		kobject_del(&q->kobj);
> +		blk_trace_remove_sysfs(dev);
> +		kobject_put(&dev->kobj);
> +		return ret;
> +	}
> +
>  	if (q->elevator) {
>  		ret = elv_register_queue(q, false);
>  		if (ret) {
> +			blk_unregister_cranges(disk);
>  			mutex_unlock(&q->sysfs_lock);
>  			mutex_unlock(&q->sysfs_dir_lock);
>  			kobject_del(&q->kobj);

Please use a goto instead of duplicating the code.
Damien Le Moal Aug. 10, 2021, 11:03 a.m. UTC | #8
On 2021/08/10 17:24, Christoph Hellwig wrote:
> On Mon, Jul 26, 2021 at 10:38:03AM +0900, Damien Le Moal wrote:
>> The Concurrent Positioning Ranges VPD page (for SCSI) and Log (for ATA)
>> contain parameters describing the number of sets of contiguous LBAs that
>> can be served independently by a single LUN multi-actuator disk. This
>> patch provides the blk_queue_set_cranges() function allowing a device
>> driver to signal to the block layer that a disk has multiple actuators,
>> each one serving a contiguous range of sectors. To describe the set
>> of sector ranges representing the different actuators of a device, the
>> data type struct blk_cranges is introduced.
>>
>> For a device with multiple actuators, a struct blk_cranges is attached
>> to the device request queue by the blk_queue_set_cranges() function. The
>> function blk_alloc_cranges() is provided for drivers to allocate this
>> structure.
>>
>> The blk_cranges structure contains kobjects (struct kobject) to register
>> with sysfs the set of sector ranges defined by a device. On initial
>> device scan, this registration is done from blk_register_queue() using
>> the block layer internal function blk_register_cranges(). If a driver
>> calls blk_queue_set_cranges() for a registered queue, e.g. when a device
>> is revalidated, blk_queue_set_cranges() will execute
>> blk_register_cranges() to update the queue sysfs attribute files.
>>
>> The sysfs file structure created starts from the cranges sub-directory
>> and contains the start sector and number of sectors served by an
>> actuator, with the information for each actuator grouped in one
>> directory per actuator. E.g. for a dual actuator drive, we have:
>>
>> $ tree /sys/block/sdk/queue/cranges/
>> /sys/block/sdk/queue/cranges/
>> |-- 0
>> |   |-- nr_sectors
>> |   `-- sector
>> `-- 1
>>     |-- nr_sectors
>>     `-- sector
>>
>> For a regular single actuator device, the cranges directory does not
>> exist.
>>
>> Device revalidation may lead to changes to this structure and to the
>> attribute values. When manipulated, the queue sysfs_lock and
>> sysfs_dir_lock are held for atomicity, similarly to how the blk-mq and
>> elevator sysfs queue sub-directories are protected.
>>
>> The code related to the management of cranges is added in the new
>> file block/blk-cranges.c.
>>
>> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
>> ---
>>  block/Makefile         |   2 +-
>>  block/blk-cranges.c    | 295 +++++++++++++++++++++++++++++++++++++++++
>>  block/blk-sysfs.c      |  13 ++
>>  block/blk.h            |   3 +
>>  include/linux/blkdev.h |  29 ++++
>>  5 files changed, 341 insertions(+), 1 deletion(-)
>>  create mode 100644 block/blk-cranges.c
>>
>> diff --git a/block/Makefile b/block/Makefile
>> index bfbe4e13ca1e..e477e6ca9ea6 100644
>> --- a/block/Makefile
>> +++ b/block/Makefile
>> @@ -9,7 +9,7 @@ obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
>>  			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
>>  			blk-mq-sysfs.o blk-mq-cpumap.o blk-mq-sched.o ioctl.o \
>>  			genhd.o ioprio.o badblocks.o partitions/ blk-rq-qos.o \
>> -			disk-events.o
>> +			disk-events.o blk-cranges.o
>>  
>>  obj-$(CONFIG_BOUNCE)		+= bounce.o
>>  obj-$(CONFIG_BLK_SCSI_REQUEST)	+= scsi_ioctl.o
>> diff --git a/block/blk-cranges.c b/block/blk-cranges.c
>> new file mode 100644
>> index 000000000000..deaa09e564f7
>> --- /dev/null
>> +++ b/block/blk-cranges.c
>> @@ -0,0 +1,295 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + *  Block device concurrent positioning ranges.
>> + *
>> + *  Copyright (C) 2021 Western Digital Corporation or its Affiliates.
>> + */
>> +#include <linux/kernel.h>
>> +#include <linux/blkdev.h>
>> +#include <linux/slab.h>
>> +#include <linux/init.h>
>> +
>> +#include "blk.h"
>> +
>> +static ssize_t blk_crange_sector_show(struct blk_crange *cr, char *page)
>> +{
>> +	return sprintf(page, "%llu\n", cr->sector);
>> +}
>> +
>> +static ssize_t blk_crange_nr_sectors_show(struct blk_crange *cr, char *page)
>> +{
>> +	return sprintf(page, "%llu\n", cr->nr_sectors);
>> +}
>> +
>> +struct blk_crange_sysfs_entry {
>> +	struct attribute attr;
>> +	ssize_t (*show)(struct blk_crange *cr, char *page);
>> +};
>> +
>> +static struct blk_crange_sysfs_entry blk_crange_sector_entry = {
>> +	.attr = { .name = "sector", .mode = 0444 },
>> +	.show = blk_crange_sector_show,
>> +};
>> +
>> +static struct blk_crange_sysfs_entry blk_crange_nr_sectors_entry = {
>> +	.attr = { .name = "nr_sectors", .mode = 0444 },
>> +	.show = blk_crange_nr_sectors_show,
>> +};
>> +
>> +static struct attribute *blk_crange_attrs[] = {
>> +	&blk_crange_sector_entry.attr,
>> +	&blk_crange_nr_sectors_entry.attr,
>> +	NULL,
>> +};
>> +ATTRIBUTE_GROUPS(blk_crange);
>> +
>> +static ssize_t blk_crange_sysfs_show(struct kobject *kobj,
>> +				     struct attribute *attr, char *page)
>> +{
>> +	struct blk_crange_sysfs_entry *entry;
>> +	struct blk_crange *cr;
>> +	struct request_queue *q;
>> +	ssize_t ret;
>> +
>> +	entry = container_of(attr, struct blk_crange_sysfs_entry, attr);
>> +	cr = container_of(kobj, struct blk_crange, kobj);
>> +	q = cr->queue;
> 
> Nit: I'd find this a little eaier to read if the variables were
> initialized at declaration time:
> 
> 	struct blk_crange_sysfs_entry *entry =
> 		container_of(attr, struct blk_crange_sysfs_entry, attr);
> 	struct blk_crange *cr = container_of(kobj, struct blk_crange, kobj);
> 	struct request_queue *q = cr->queue;
> 
> (or maybe even don't bother with the q local variable).

OK.

> 
>> +/*
>> + * Dummy release function to make kobj happy.
>> + */
>> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
>> +{
>> +}
> 
> How do we ensure the kobj is still alive while it is accessed?

q->sysfs_lock ensures that. This mutex is taken whenever revalidate registers
new ranges (see blk_queue_set_cranges below), and is taken also when the ranges
are unregistered (on revalidate if the ranges changed and when the request queue
is unregistered). And blk_crange_sysfs_show() takes that lock too. So the kobj
cannot be freed while it is being accessed (the sysfs inode lock also prevents
it since kobj_del() will take the inode lock).

> 
>> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
> 
> s/blk_queue/disk/

Hmmm... The argument is a gendisk, but it is the request queue that is modified.
So following other functions like this, isn't blk_queue_ prefix better ?

> 
>>  	mutex_lock(&q->sysfs_lock);
>> +
>> +	ret = blk_register_cranges(disk, NULL);
>> +	if (ret) {
>> +		mutex_unlock(&q->sysfs_lock);
>> +		mutex_unlock(&q->sysfs_dir_lock);
>> +		kobject_del(&q->kobj);
>> +		blk_trace_remove_sysfs(dev);
>> +		kobject_put(&dev->kobj);
>> +		return ret;
>> +	}
>> +
>>  	if (q->elevator) {
>>  		ret = elv_register_queue(q, false);
>>  		if (ret) {
>> +			blk_unregister_cranges(disk);
>>  			mutex_unlock(&q->sysfs_lock);
>>  			mutex_unlock(&q->sysfs_dir_lock);
>>  			kobject_del(&q->kobj);
> 
> Please use a goto instead of duplicating the code.

I had tried that but it made a mess. Will have another look at it.
Christoph Hellwig Aug. 10, 2021, 4:02 p.m. UTC | #9
On Tue, Aug 10, 2021 at 11:03:41AM +0000, Damien Le Moal wrote:
> >> + * Dummy release function to make kobj happy.
> >> + */
> >> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
> >> +{
> >> +}
> > 
> > How do we ensure the kobj is still alive while it is accessed?
> 
> q->sysfs_lock ensures that. This mutex is taken whenever revalidate registers
> new ranges (see blk_queue_set_cranges below), and is taken also when the ranges
> are unregistered (on revalidate if the ranges changed and when the request queue
> is unregistered). And blk_crange_sysfs_show() takes that lock too. So the kobj
> cannot be freed while it is being accessed (the sysfs inode lock also prevents
> it since kobj_del() will take the inode lock).

Does it?  It only protects the access inside of it, but not the object
lifetime.

> 
> > 
> >> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
> > 
> > s/blk_queue/disk/
> 
> Hmmm... The argument is a gendisk, but it is the request queue that is modified.
> So following other functions like this, isn't blk_queue_ prefix better ?

Do we have blk_queue_ functions that take a gendisk anywhere?  The
ones I noticed (and the ones I've recently added) all use disk_.
Damien Le Moal Aug. 10, 2021, 11:46 p.m. UTC | #10
On 2021/08/11 1:02, hch@infradead.org wrote:
> On Tue, Aug 10, 2021 at 11:03:41AM +0000, Damien Le Moal wrote:
>>>> + * Dummy release function to make kobj happy.
>>>> + */
>>>> +static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
>>>> +{
>>>> +}
>>>
>>> How do we ensure the kobj is still alive while it is accessed?
>>
>> q->sysfs_lock ensures that. This mutex is taken whenever revalidate registers
>> new ranges (see blk_queue_set_cranges below), and is taken also when the ranges
>> are unregistered (on revalidate if the ranges changed and when the request queue
>> is unregistered). And blk_crange_sysfs_show() takes that lock too. So the kobj
>> cannot be freed while it is being accessed (the sysfs inode lock also prevents
>> it since kobj_del() will take the inode lock).
> 
> Does it?  It only protects the access inside of it, but not the object
> lifetime.

Alloc & free of the cranges structure (the top kobj) are under the
q->sysfs_lock, always. With the accesses also under that same lock, this is
mutually exclusive and all protected. Furthermore, the crange
kobj_add()/kobj_del() do a kobj_get()/kobj_put() on the parent kobj, which is
the request queue kobj. So the queue cannot go away under the crange struct.

I can add a kobj_get/put for the crange struct, but I really do not see the need
for that. Or am I missing something ?

>>>> +void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
>>>
>>> s/blk_queue/disk/
>>
>> Hmmm... The argument is a gendisk, but it is the request queue that is modified.
>> So following other functions like this, isn't blk_queue_ prefix better ?
> 
> Do we have blk_queue_ functions that take a gendisk anywhere?  The
> ones I noticed (and the ones I've recently added) all use disk_.

The only one I can find is blk_queue_set_zoned(), which we could probably rename
to disk_set_zoned(). There are blk_revalidate_disk_zones() and blkdev_nr_zones()
which also take a gendisk and could probably be renamed as
disk_revalidate_zones() and disk_nr_zones() for consistency.

Will rename to disk_set_cranges().
diff mbox series

Patch

diff --git a/block/Makefile b/block/Makefile
index bfbe4e13ca1e..e477e6ca9ea6 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -9,7 +9,7 @@  obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
 			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
 			blk-mq-sysfs.o blk-mq-cpumap.o blk-mq-sched.o ioctl.o \
 			genhd.o ioprio.o badblocks.o partitions/ blk-rq-qos.o \
-			disk-events.o
+			disk-events.o blk-cranges.o
 
 obj-$(CONFIG_BOUNCE)		+= bounce.o
 obj-$(CONFIG_BLK_SCSI_REQUEST)	+= scsi_ioctl.o
diff --git a/block/blk-cranges.c b/block/blk-cranges.c
new file mode 100644
index 000000000000..deaa09e564f7
--- /dev/null
+++ b/block/blk-cranges.c
@@ -0,0 +1,295 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Block device concurrent positioning ranges.
+ *
+ *  Copyright (C) 2021 Western Digital Corporation or its Affiliates.
+ */
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include "blk.h"
+
+static ssize_t blk_crange_sector_show(struct blk_crange *cr, char *page)
+{
+	return sprintf(page, "%llu\n", cr->sector);
+}
+
+static ssize_t blk_crange_nr_sectors_show(struct blk_crange *cr, char *page)
+{
+	return sprintf(page, "%llu\n", cr->nr_sectors);
+}
+
+struct blk_crange_sysfs_entry {
+	struct attribute attr;
+	ssize_t (*show)(struct blk_crange *cr, char *page);
+};
+
+static struct blk_crange_sysfs_entry blk_crange_sector_entry = {
+	.attr = { .name = "sector", .mode = 0444 },
+	.show = blk_crange_sector_show,
+};
+
+static struct blk_crange_sysfs_entry blk_crange_nr_sectors_entry = {
+	.attr = { .name = "nr_sectors", .mode = 0444 },
+	.show = blk_crange_nr_sectors_show,
+};
+
+static struct attribute *blk_crange_attrs[] = {
+	&blk_crange_sector_entry.attr,
+	&blk_crange_nr_sectors_entry.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(blk_crange);
+
+static ssize_t blk_crange_sysfs_show(struct kobject *kobj,
+				     struct attribute *attr, char *page)
+{
+	struct blk_crange_sysfs_entry *entry;
+	struct blk_crange *cr;
+	struct request_queue *q;
+	ssize_t ret;
+
+	entry = container_of(attr, struct blk_crange_sysfs_entry, attr);
+	cr = container_of(kobj, struct blk_crange, kobj);
+	q = cr->queue;
+
+	mutex_lock(&q->sysfs_lock);
+	ret = entry->show(cr, page);
+	mutex_unlock(&q->sysfs_lock);
+
+	return ret;
+}
+
+static const struct sysfs_ops blk_crange_sysfs_ops = {
+	.show	= blk_crange_sysfs_show,
+};
+
+/*
+ * Dummy release function to make kobj happy.
+ */
+static void blk_cranges_sysfs_nop_release(struct kobject *kobj)
+{
+}
+
+static struct kobj_type blk_crange_ktype = {
+	.sysfs_ops	= &blk_crange_sysfs_ops,
+	.default_groups	= blk_crange_groups,
+	.release	= blk_cranges_sysfs_nop_release,
+};
+
+static struct kobj_type blk_cranges_ktype = {
+	.release	= blk_cranges_sysfs_nop_release,
+};
+
+/**
+ * blk_register_cranges - register with sysfs a set of concurrent ranges
+ * @disk:		Target disk
+ * @new_cranges:	New set of concurrent ranges
+ *
+ * Register with sysfs a set of concurrent ranges for @disk. If @new_cranges
+ * is not NULL, this set of concurrent ranges is registered and the
+ * old set specified by q->cranges is unregistered. Otherwise, q->cranges
+ * is registered if it is not already.
+ */
+int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges)
+{
+	struct request_queue *q = disk->queue;
+	struct blk_cranges *cranges;
+	int i, ret;
+
+	lockdep_assert_held(&q->sysfs_dir_lock);
+	lockdep_assert_held(&q->sysfs_lock);
+
+	/* If a new range set is specified, unregister the old one */
+	if (new_cranges) {
+		if (q->cranges)
+			blk_unregister_cranges(disk);
+		q->cranges = new_cranges;
+	}
+
+	cranges = q->cranges;
+	if (!cranges)
+		return 0;
+
+	/*
+	 * At this point, q->cranges is the new set of sector ranges that needs
+	 * to be registered with sysfs.
+	 */
+	WARN_ON(cranges->sysfs_registered);
+	ret = kobject_init_and_add(&cranges->kobj, &blk_cranges_ktype,
+				   &q->kobj, "%s", "cranges");
+	if (ret)
+		goto free;
+
+	for (i = 0; i < cranges->nr_ranges; i++) {
+		cranges->ranges[i].queue = q;
+		ret = kobject_init_and_add(&cranges->ranges[i].kobj,
+					   &blk_crange_ktype, &cranges->kobj,
+					   "%d", i);
+		if (ret)
+			goto delete_obj;
+	}
+
+	cranges->sysfs_registered = true;
+
+	return 0;
+
+delete_obj:
+	while (--i >= 0)
+		kobject_del(&cranges->ranges[i].kobj);
+	kobject_del(&cranges->kobj);
+free:
+	kfree(cranges);
+	q->cranges = NULL;
+	return ret;
+}
+
+void blk_unregister_cranges(struct gendisk *disk)
+{
+	struct request_queue *q = disk->queue;
+	struct blk_cranges *cranges = q->cranges;
+	int i;
+
+	lockdep_assert_held(&q->sysfs_dir_lock);
+	lockdep_assert_held(&q->sysfs_lock);
+
+	if (!cranges)
+		return;
+
+	if (cranges->sysfs_registered) {
+		for (i = 0; i < cranges->nr_ranges; i++)
+			kobject_del(&cranges->ranges[i].kobj);
+		kobject_del(&cranges->kobj);
+	}
+
+	kfree(cranges);
+	q->cranges = NULL;
+}
+
+static bool blk_check_ranges(struct gendisk *disk, struct blk_cranges *cr)
+{
+	sector_t capacity = get_capacity(disk);
+	sector_t min_sector = (sector_t)-1;
+	sector_t max_sector = 0;
+	int i;
+
+	/*
+	 * Sector ranges may overlap but should overall contain all sectors
+	 * within the disk capacity.
+	 */
+	for (i = 0; i < cr->nr_ranges; i++) {
+		min_sector = min(min_sector, cr->ranges[i].sector);
+		max_sector = max(max_sector, cr->ranges[i].sector +
+					     cr->ranges[i].nr_sectors);
+	}
+
+	if (min_sector != 0 || max_sector < capacity) {
+		pr_warn("Invalid concurrent ranges: missing sectors\n");
+		return false;
+	}
+
+	if (max_sector > capacity) {
+		pr_warn("Invalid concurrent ranges: beyond capacity\n");
+		return false;
+	}
+
+	return true;
+}
+
+static bool blk_cranges_changed(struct gendisk *disk, struct blk_cranges *new)
+{
+	struct blk_cranges *old = disk->queue->cranges;
+	int i;
+
+	if (!old)
+		return true;
+
+	if (old->nr_ranges != new->nr_ranges)
+		return true;
+
+	for (i = 0; i < old->nr_ranges; i++) {
+		if (new->ranges[i].sector != old->ranges[i].sector ||
+		    new->ranges[i].nr_sectors != old->ranges[i].nr_sectors)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * blk_alloc_cranges - Allocate a concurrent positioning range structure
+ * @disk:	target disk
+ * @nr_ranges:	Number of concurrent ranges
+ *
+ * Allocate a struct blk_cranges structure with @nr_ranges range descriptors.
+ */
+struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges)
+{
+	struct blk_cranges *cr;
+
+	cr = kzalloc_node(struct_size(cr, ranges, nr_ranges), GFP_KERNEL,
+			  disk->queue->node);
+	if (cr)
+		cr->nr_ranges = nr_ranges;
+	return cr;
+}
+EXPORT_SYMBOL_GPL(blk_alloc_cranges);
+
+/**
+ * blk_queue_set_cranges - Set a disk concurrent positioning ranges
+ * @disk:	target disk
+ * @cr:		concurrent ranges structure
+ *
+ * Set the concurrant positioning ranges information of the request queue
+ * of @disk to @cr. If @cr is NULL and the concurrent ranges structure
+ * already set, if any, is cleared. If there are no differences between
+ * @cr and the concurrent ranges structure already set, @cr is freed.
+ */
+void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr)
+{
+	struct request_queue *q = disk->queue;
+
+	if (WARN_ON_ONCE(cr && !cr->nr_ranges)) {
+		kfree(cr);
+		cr = NULL;
+	}
+
+	mutex_lock(&q->sysfs_dir_lock);
+	mutex_lock(&q->sysfs_lock);
+
+	if (cr) {
+		if (!blk_check_ranges(disk, cr)) {
+			kfree(cr);
+			cr = NULL;
+			goto reg;
+		}
+
+		if (!blk_cranges_changed(disk, cr)) {
+			kfree(cr);
+			goto unlock;
+		}
+	}
+
+	/*
+	 * This may be called for a registered queue. E.g. during a device
+	 * revalidation. If that is the case, we need to unregister the old
+	 * set of concurrent ranges and register the new set. If the queue
+	 * is not registered, the device request queue registration will
+	 * register the ranges, so only swap in the new set and free the
+	 * old one.
+	 */
+reg:
+	if (blk_queue_registered(q)) {
+		blk_register_cranges(disk, cr);
+	} else {
+		swap(q->cranges, cr);
+		kfree(cr);
+	}
+
+unlock:
+	mutex_unlock(&q->sysfs_lock);
+	mutex_unlock(&q->sysfs_dir_lock);
+}
+EXPORT_SYMBOL_GPL(blk_queue_set_cranges);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 370d83c18057..aeac98ecc5a0 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -899,9 +899,21 @@  int blk_register_queue(struct gendisk *disk)
 	}
 
 	mutex_lock(&q->sysfs_lock);
+
+	ret = blk_register_cranges(disk, NULL);
+	if (ret) {
+		mutex_unlock(&q->sysfs_lock);
+		mutex_unlock(&q->sysfs_dir_lock);
+		kobject_del(&q->kobj);
+		blk_trace_remove_sysfs(dev);
+		kobject_put(&dev->kobj);
+		return ret;
+	}
+
 	if (q->elevator) {
 		ret = elv_register_queue(q, false);
 		if (ret) {
+			blk_unregister_cranges(disk);
 			mutex_unlock(&q->sysfs_lock);
 			mutex_unlock(&q->sysfs_dir_lock);
 			kobject_del(&q->kobj);
@@ -985,6 +997,7 @@  void blk_unregister_queue(struct gendisk *disk)
 	mutex_lock(&q->sysfs_lock);
 	if (q->elevator)
 		elv_unregister_queue(q);
+	blk_unregister_cranges(disk);
 	mutex_unlock(&q->sysfs_lock);
 	mutex_unlock(&q->sysfs_dir_lock);
 
diff --git a/block/blk.h b/block/blk.h
index 4b885c0f6708..650c0d87987c 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -368,4 +368,7 @@  extern struct device_attribute dev_attr_events;
 extern struct device_attribute dev_attr_events_async;
 extern struct device_attribute dev_attr_events_poll_msecs;
 
+int blk_register_cranges(struct gendisk *disk, struct blk_cranges *new_cranges);
+void blk_unregister_cranges(struct gendisk *disk);
+
 #endif /* BLK_INTERNAL_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d3afea47ade6..d10352674d20 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -378,6 +378,29 @@  static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev,
 
 #endif /* CONFIG_BLK_DEV_ZONED */
 
+/*
+ * Concurrent sector ranges: struct blk_crange describes range of
+ * contiguous sectors that can be served by independent resources on the
+ * device. The set of ranges defined in struct blk_cranges must overall
+ * include all sectors within the device capacity.
+ * For a device with multiple ranges, e.g. a single LUN multi-actuator HDD,
+ * requests targeting sectors in different ranges can be executed in parallel.
+ * A request can straddle a range boundary.
+ */
+struct blk_crange {
+	struct kobject		kobj;
+	struct request_queue	*queue;
+	sector_t		sector;
+	sector_t		nr_sectors;
+};
+
+struct blk_cranges {
+	struct kobject		kobj;
+	bool			sysfs_registered;
+	unsigned int		nr_ranges;
+	struct blk_crange	ranges[];
+};
+
 struct request_queue {
 	struct request		*last_merge;
 	struct elevator_queue	*elevator;
@@ -570,6 +593,9 @@  struct request_queue {
 
 #define BLK_MAX_WRITE_HINTS	5
 	u64			write_hints[BLK_MAX_WRITE_HINTS];
+
+	/* Concurrent sector ranges */
+	struct blk_cranges	*cranges;
 };
 
 /* Keep blk_queue_flag_name[] in sync with the definitions below */
@@ -1163,6 +1189,9 @@  extern void blk_queue_required_elevator_features(struct request_queue *q,
 extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
 					      struct device *dev);
 
+struct blk_cranges *blk_alloc_cranges(struct gendisk *disk, int nr_ranges);
+void blk_queue_set_cranges(struct gendisk *disk, struct blk_cranges *cr);
+
 /*
  * Number of physical segments as sent to the device.
  *