diff mbox series

[RFC,3/8] nvme: add support for the Verify command

Message ID 20211104064634.4481-4-chaitanyak@nvidia.com (mailing list archive)
State Not Applicable
Headers show
Series block: add support for REQ_OP_VERIFY | expand

Commit Message

Chaitanya Kulkarni Nov. 4, 2021, 6:46 a.m. UTC 
From: Chaitanya Kulkarni <kch@nvidia.com>

Allow verify operations (REQ_OP_VERIFY) on the block device, if the
device supports optional command bit set for verify. Add support
to setup verify command. Set maximum possible verify sectors in one
verify command according to maximum hardware sectors supported by the
controller.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/nvme/host/core.c | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/nvme.h     | 19 +++++++++++++++++++
 2 files changed, 58 insertions(+)

Comments

Keith Busch Nov. 4, 2021, 10:44 p.m. UTC | #1 
On Wed, Nov 03, 2021 at 11:46:29PM -0700, Chaitanya Kulkarni wrote:
> +static inline blk_status_t nvme_setup_verify(struct nvme_ns *ns,
> +		struct request *req, struct nvme_command *cmnd)
> +{

Due to recent driver changes, you need a "memset(cmnd, 0, sizeof(*cmnd))"
prior to setting up the rest of the command, or you need to set each
command dword individually.

> +	cmnd->verify.opcode = nvme_cmd_verify;
> +	cmnd->verify.nsid = cpu_to_le32(ns->head->ns_id);
> +	cmnd->verify.slba =
> +		cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
> +	cmnd->verify.length =
> +		cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
> +	cmnd->verify.control = 0;
> +	return BLK_STS_OK;
> +}

> +static void nvme_config_verify(struct gendisk *disk, struct nvme_ns *ns)
> +{
> +	u64 max_blocks;
> +
> +	if (!(ns->ctrl->oncs & NVME_CTRL_ONCS_VERIFY))
> +		return;
> +
> +	if (ns->ctrl->max_hw_sectors == UINT_MAX)
> +		max_blocks = (u64)USHRT_MAX + 1;
> +	else
> +		max_blocks = ns->ctrl->max_hw_sectors + 1;

If supported by the controller, this maximum is defined in the non-mdts
command limits in NVM command set specific Identify Controller VSL field.

> +
> +	/* keep same as discard */
> +	if (blk_queue_flag_test_and_set(QUEUE_FLAG_VERIFY, disk->queue))
> +		return;
> +
> +	blk_queue_max_verify_sectors(disk->queue,
> +				     nvme_lba_to_sect(ns, max_blocks));
> +
> +}
Chaitanya Kulkarni Nov. 11, 2021, 8:09 a.m. UTC | #2 
On 11/4/2021 3:44 PM, Keith Busch wrote:
> External email: Use caution opening links or attachments
> 
> 
> On Wed, Nov 03, 2021 at 11:46:29PM -0700, Chaitanya Kulkarni wrote:
>> +static inline blk_status_t nvme_setup_verify(struct nvme_ns *ns,
>> +             struct request *req, struct nvme_command *cmnd)
>> +{
> 
> Due to recent driver changes, you need a "memset(cmnd, 0, sizeof(*cmnd))"
> prior to setting up the rest of the command, or you need to set each
> command dword individually.

Agree, will fix that in V1.

> 
>> +     cmnd->verify.opcode = nvme_cmd_verify;
>> +     cmnd->verify.nsid = cpu_to_le32(ns->head->ns_id);
>> +     cmnd->verify.slba =
>> +             cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
>> +     cmnd->verify.length =
>> +             cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
>> +     cmnd->verify.control = 0;
>> +     return BLK_STS_OK;
>> +}
> 
>> +static void nvme_config_verify(struct gendisk *disk, struct nvme_ns *ns)
>> +{
>> +     u64 max_blocks;
>> +
>> +     if (!(ns->ctrl->oncs & NVME_CTRL_ONCS_VERIFY))
>> +             return;
>> +
>> +     if (ns->ctrl->max_hw_sectors == UINT_MAX)
>> +             max_blocks = (u64)USHRT_MAX + 1;
>> +     else
>> +             max_blocks = ns->ctrl->max_hw_sectors + 1;
> 
> If supported by the controller, this maximum is defined in the non-mdts
> command limits in NVM command set specific Identify Controller VSL field.
> 

I need take a closer look at this. I'll fix that in V1.

>> +
>> +     /* keep same as discard */
>> +     if (blk_queue_flag_test_and_set(QUEUE_FLAG_VERIFY, disk->queue))
>> +             return;
>> +
>> +     blk_queue_max_verify_sectors(disk->queue,
>> +                                  nvme_lba_to_sect(ns, max_blocks));
>> +
>> +}

Thanks for the comment Keith.
diff mbox series

Patch

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 546a10407385..250647c3bb7b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -801,6 +801,19 @@  static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
 	return BLK_STS_OK;
 }
 
+static inline blk_status_t nvme_setup_verify(struct nvme_ns *ns,
+		struct request *req, struct nvme_command *cmnd)
+{
+	cmnd->verify.opcode = nvme_cmd_verify;
+	cmnd->verify.nsid = cpu_to_le32(ns->head->ns_id);
+	cmnd->verify.slba =
+		cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
+	cmnd->verify.length =
+		cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
+	cmnd->verify.control = 0;
+	return BLK_STS_OK;
+}
+
 static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		struct request *req, struct nvme_command *cmnd,
 		enum nvme_opcode op)
@@ -904,6 +917,9 @@  blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
 	case REQ_OP_WRITE_ZEROES:
 		ret = nvme_setup_write_zeroes(ns, req, cmd);
 		break;
+	case REQ_OP_VERIFY:
+		ret = nvme_setup_verify(ns, req, cmd);
+		break;
 	case REQ_OP_DISCARD:
 		ret = nvme_setup_discard(ns, req, cmd);
 		break;
@@ -1974,6 +1990,28 @@  static void nvme_config_write_zeroes(struct gendisk *disk, struct nvme_ns *ns)
 					   nvme_lba_to_sect(ns, max_blocks));
 }
 
+static void nvme_config_verify(struct gendisk *disk, struct nvme_ns *ns)
+{
+	u64 max_blocks;
+
+	if (!(ns->ctrl->oncs & NVME_CTRL_ONCS_VERIFY))
+		return;
+
+	if (ns->ctrl->max_hw_sectors == UINT_MAX)
+		max_blocks = (u64)USHRT_MAX + 1;
+	else
+		max_blocks = ns->ctrl->max_hw_sectors + 1;
+
+	/* keep same as discard */
+	if (blk_queue_flag_test_and_set(QUEUE_FLAG_VERIFY, disk->queue))
+		return;
+
+	blk_queue_max_verify_sectors(disk->queue,
+				     nvme_lba_to_sect(ns, max_blocks));
+
+}
+
+
 static bool nvme_ns_ids_valid(struct nvme_ns_ids *ids)
 {
 	return !uuid_is_null(&ids->uuid) ||
@@ -2144,6 +2182,7 @@  static void nvme_update_disk_info(struct gendisk *disk,
 
 	nvme_config_discard(disk, ns);
 	nvme_config_write_zeroes(disk, ns);
+	nvme_config_verify(disk, ns);
 
 	set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
 		test_bit(NVME_NS_FORCE_RO, &ns->flags));
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index b08787cd0881..14925602726a 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -318,6 +318,7 @@  enum {
 	NVME_CTRL_ONCS_WRITE_UNCORRECTABLE	= 1 << 1,
 	NVME_CTRL_ONCS_DSM			= 1 << 2,
 	NVME_CTRL_ONCS_WRITE_ZEROES		= 1 << 3,
+	NVME_CTRL_ONCS_VERIFY			= 1 << 7,
 	NVME_CTRL_ONCS_RESERVATIONS		= 1 << 5,
 	NVME_CTRL_ONCS_TIMESTAMP		= 1 << 6,
 	NVME_CTRL_VWC_PRESENT			= 1 << 0,
@@ -890,6 +891,23 @@  struct nvme_write_zeroes_cmd {
 	__le16			appmask;
 };
 
+struct nvme_verify_cmd {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2;
+	__le64			metadata;
+	union nvme_data_ptr	dptr;
+	__le64			slba;
+	__le16			length;
+	__le16			control;
+	__le32			rsvd3;
+	__le32			reftag;
+	__le16			eapptag;
+	__le16			eappmask;
+};
+
 enum nvme_zone_mgmt_action {
 	NVME_ZONE_CLOSE		= 0x1,
 	NVME_ZONE_FINISH	= 0x2,
@@ -1411,6 +1429,7 @@  struct nvme_command {
 		struct nvme_format_cmd format;
 		struct nvme_dsm_cmd dsm;
 		struct nvme_write_zeroes_cmd write_zeroes;
+		struct nvme_verify_cmd verify;
 		struct nvme_zone_mgmt_send_cmd zms;
 		struct nvme_zone_mgmt_recv_cmd zmr;
 		struct nvme_abort_cmd abort;