@@ -110,6 +110,7 @@ extern int prot_mask;
#define MPI3MR_TSUPDATE_INTERVAL 900
#define MPI3MR_DEFAULT_SHUTDOWN_TIME 120
#define MPI3MR_RAID_ERRREC_RESET_TIMEOUT 180
+#define MPI3MR_RESET_ACK_TIMEOUT 30
#define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */
@@ -210,7 +211,8 @@ enum mpi3mr_reset_reason {
MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21,
MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
MPI3MR_RESET_FROM_SYSFS = 23,
- MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24
+ MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
+ MPI3MR_RESET_FROM_FIRMWARE = 27,
};
/**
@@ -678,9 +680,9 @@ struct scmd_priv {
* @removepend_bitmap: Remove pending bitmap
* @delayed_rmhs_list: Delayed device removal list
* @ts_update_counter: Timestamp update counter
- * @fault_dbg: Fault debug flag
* @reset_in_progress: Reset in progress flag
* @unrecoverable: Controller unrecoverable flag
+ * @prev_reset_result: Result of previous reset
* @reset_mutex: Controller reset mutex
* @reset_waitq: Controller reset wait queue
* @diagsave_timeout: Diagnostic information save timeout
@@ -804,9 +806,9 @@ struct mpi3mr_ioc {
struct list_head delayed_rmhs_list;
u32 ts_update_counter;
- u8 fault_dbg;
u8 reset_in_progress;
u8 unrecoverable;
+ int prev_reset_result;
struct mutex reset_mutex;
wait_queue_head_t reset_waitq;
@@ -891,8 +893,6 @@ void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc);
int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
u32 reset_reason, u8 snapdump);
-int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
- u32 reset_reason);
void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc);
void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc);
@@ -907,5 +907,7 @@ void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc);
void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc);
void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code);
+void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc);
+void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code);
#endif /*MPI3MR_H_INCLUDED*/
@@ -808,6 +808,7 @@ static const struct {
},
{ MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" },
{ MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" },
+ { MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronus reset" },
};
/**
@@ -872,7 +873,7 @@ static const char *mpi3mr_reset_type_name(u16 reset_type)
*
* Return: Nothing.
*/
-static void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc)
+void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc)
{
u32 ioc_status, code, code1, code2, code3;
@@ -970,25 +971,25 @@ static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc,
ioc_config &= ~MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC;
writel(ioc_config, &mrioc->sysif_regs->ioc_configuration);
- timeout = mrioc->ready_timeout * 10;
+ timeout = MPI3MR_RESET_ACK_TIMEOUT * 10;
do {
ioc_status = readl(&mrioc->sysif_regs->ioc_status);
if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)) {
mpi3mr_clear_reset_history(mrioc);
- ioc_config =
- readl(&mrioc->sysif_regs->ioc_configuration);
- if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
- (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
- (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) {
- retval = 0;
- break;
- }
+ break;
+ }
+ if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) {
+ mpi3mr_print_fault_info(mrioc);
+ break;
}
msleep(100);
} while (--timeout);
- ioc_status = readl(&mrioc->sysif_regs->ioc_status);
ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ if (timeout && !((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
+ (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
+ (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC)))
+ retval = 0;
ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n",
(!retval) ? "successful" : "failed", ioc_status, ioc_config);
@@ -1117,7 +1118,6 @@ static inline bool
mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config)
{
if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) ||
- (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) ||
(ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC)))
return true;
return false;
@@ -1140,8 +1140,10 @@ static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc,
if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT))
return false;
fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK;
- if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET)
+ if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) {
+ mpi3mr_print_fault_info(mrioc);
return true;
+ }
return false;
}
@@ -1180,26 +1182,36 @@ static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type,
u32 reset_reason)
{
int retval = -1;
- u8 unlock_retry_count, reset_retry_count = 0;
- u32 host_diagnostic, timeout, ioc_status, ioc_config;
+ u8 unlock_retry_count = 0;
+ u32 host_diagnostic, ioc_status, ioc_config;
+ u32 timeout = MPI3MR_RESET_ACK_TIMEOUT * 10;
- pci_cfg_access_lock(mrioc->pdev);
if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) &&
(reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT))
- goto out;
+ return retval;
if (mrioc->unrecoverable)
- goto out;
-retry_reset:
- unlock_retry_count = 0;
+ return retval;
+ if (reset_reason == MPI3MR_RESET_FROM_FIRMWARE) {
+ retval = 0;
+ return retval;
+ }
+
+ ioc_info(mrioc, "%s reset due to %s(0x%x)\n",
+ mpi3mr_reset_type_name(reset_type),
+ mpi3mr_reset_rc_name(reset_reason), reset_reason);
+
mpi3mr_clear_reset_history(mrioc);
do {
ioc_info(mrioc,
"Write magic sequence to unlock host diag register (retry=%d)\n",
++unlock_retry_count);
if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) {
- writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]);
+ ioc_err(mrioc,
+ "%s reset failed due to unlock failure, host_diagnostic(0x%08x)\n",
+ mpi3mr_reset_type_name(reset_type),
+ host_diagnostic);
mrioc->unrecoverable = 1;
- goto out;
+ return retval;
}
writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH,
@@ -1224,31 +1236,26 @@ retry_reset:
} while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE));
writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]);
- ioc_info(mrioc, "%s reset due to %s(0x%x)\n",
- mpi3mr_reset_type_name(reset_type),
- mpi3mr_reset_rc_name(reset_reason), reset_reason);
writel(host_diagnostic | reset_type,
&mrioc->sysif_regs->host_diagnostic);
- timeout = mrioc->ready_timeout * 10;
- if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) {
+ switch (reset_type) {
+ case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET:
do {
ioc_status = readl(&mrioc->sysif_regs->ioc_status);
- if (ioc_status &
- MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) {
+ ioc_config =
+ readl(&mrioc->sysif_regs->ioc_configuration);
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)
+ && mpi3mr_soft_reset_success(ioc_status, ioc_config)
+ ) {
mpi3mr_clear_reset_history(mrioc);
- ioc_config =
- readl(&mrioc->sysif_regs->ioc_configuration);
- if (mpi3mr_soft_reset_success(ioc_status,
- ioc_config)) {
- retval = 0;
- break;
- }
+ retval = 0;
+ break;
}
msleep(100);
} while (--timeout);
- writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
- &mrioc->sysif_regs->write_sequence);
- } else if (reset_type == MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT) {
+ mpi3mr_print_fault_info(mrioc);
+ break;
+ case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT:
do {
ioc_status = readl(&mrioc->sysif_regs->ioc_status);
if (mpi3mr_diagfault_success(mrioc, ioc_status)) {
@@ -1257,28 +1264,22 @@ retry_reset:
}
msleep(100);
} while (--timeout);
- mpi3mr_clear_reset_history(mrioc);
- writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
- &mrioc->sysif_regs->write_sequence);
- }
- if (retval && ((++reset_retry_count) < MPI3MR_MAX_RESET_RETRY_COUNT)) {
- ioc_status = readl(&mrioc->sysif_regs->ioc_status);
- ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
- ioc_info(mrioc,
- "Base IOC Sts/Config after reset try %d is (0x%x)/(0x%x)\n",
- reset_retry_count, ioc_status, ioc_config);
- goto retry_reset;
+ break;
+ default:
+ break;
}
-out:
- pci_cfg_access_unlock(mrioc->pdev);
- ioc_status = readl(&mrioc->sysif_regs->ioc_status);
- ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND,
+ &mrioc->sysif_regs->write_sequence);
+ ioc_config = readl(&mrioc->sysif_regs->ioc_configuration);
+ ioc_status = readl(&mrioc->sysif_regs->ioc_status);
ioc_info(mrioc,
- "Base IOC Sts/Config after %s reset is (0x%x)/(0x%x)\n",
- (!retval) ? "successful" : "failed", ioc_status,
+ "ioc_status/ioc_onfig after %s reset is (0x%x)/(0x%x)\n",
+ (!retval)?"successful":"failed", ioc_status,
ioc_config);
+ if (retval)
+ mrioc->unrecoverable = 1;
return retval;
}
@@ -2190,6 +2191,9 @@ static void mpi3mr_watchdog_work(struct work_struct *work)
enum mpi3mr_iocstate ioc_state;
u32 fault, host_diagnostic;
+ if (mrioc->reset_in_progress || mrioc->unrecoverable)
+ return;
+
if (mrioc->ts_update_counter++ >= MPI3MR_TSUPDATE_INTERVAL) {
mrioc->ts_update_counter = 0;
mpi3mr_sync_timestamp(mrioc);
@@ -2300,41 +2304,6 @@ void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc)
}
}
-/**
- * mpi3mr_kill_ioc - Kill the controller
- * @mrioc: Adapter instance reference
- * @reason: reason for the failure.
- *
- * If fault debug is enabled, display the fault info else issue
- * diag fault and freeze the system for controller debug
- * purpose.
- *
- * Return: Nothing.
- */
-static void mpi3mr_kill_ioc(struct mpi3mr_ioc *mrioc, u32 reason)
-{
- enum mpi3mr_iocstate ioc_state;
-
- if (!mrioc->fault_dbg)
- return;
-
- dump_stack();
-
- ioc_state = mpi3mr_get_iocstate(mrioc);
- if (ioc_state == MRIOC_STATE_FAULT)
- mpi3mr_print_fault_info(mrioc);
- else {
- ioc_err(mrioc, "Firmware is halted due to the reason %d\n",
- reason);
- mpi3mr_diagfault_reset_handler(mrioc, reason);
- }
- if (mrioc->fault_dbg == 2)
- for (;;)
- ;
- else
- panic("panic in %s\n", __func__);
-}
-
/**
* mpi3mr_setup_admin_qpair - Setup admin queue pair
* @mrioc: Adapter instance reference
@@ -4039,41 +4008,6 @@ static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc)
}
}
-/**
- * mpi3mr_diagfault_reset_handler - Diag fault reset handler
- * @mrioc: Adapter instance reference
- * @reset_reason: Reset reason code
- *
- * This is an handler for issuing diag fault reset from the
- * applications through IOCTL path to stop the execution of the
- * controller
- *
- * Return: 0 on success, non-zero on failure.
- */
-int mpi3mr_diagfault_reset_handler(struct mpi3mr_ioc *mrioc,
- u32 reset_reason)
-{
- int retval = 0;
-
- ioc_info(mrioc, "Entry: reason code: %s\n",
- mpi3mr_reset_rc_name(reset_reason));
- mrioc->reset_in_progress = 1;
-
- mpi3mr_ioc_disable_intr(mrioc);
-
- retval = mpi3mr_issue_reset(mrioc,
- MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason);
-
- if (retval) {
- ioc_err(mrioc, "The diag fault reset failed: reason %d\n",
- reset_reason);
- mpi3mr_ioc_enable_intr(mrioc);
- }
- ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED"));
- mrioc->reset_in_progress = 0;
- return retval;
-}
-
/**
* mpi3mr_soft_reset_handler - Reset the controller
* @mrioc: Adapter instance reference
@@ -4102,34 +4036,44 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
unsigned long flags;
u32 host_diagnostic, timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10;
- if (mrioc->fault_dbg) {
- if (snapdump)
- mpi3mr_set_diagsave(mrioc);
- mpi3mr_kill_ioc(mrioc, reset_reason);
- }
-
+ /* Block the reset handler until diag save in progress*/
+ dprint_reset(mrioc,
+ "soft_reset_handler: check and block on diagsave_timeout(%d)\n",
+ mrioc->diagsave_timeout);
+ while (mrioc->diagsave_timeout)
+ ssleep(1);
/*
* Block new resets until the currently executing one is finished and
* return the status of the existing reset for all blocked resets
*/
+ dprint_reset(mrioc, "soft_reset_handler: acquiring reset_mutex\n");
if (!mutex_trylock(&mrioc->reset_mutex)) {
- ioc_info(mrioc, "Another reset in progress\n");
- return -1;
+ ioc_info(mrioc,
+ "controller reset triggered by %s is blocked due to another reset in progress\n",
+ mpi3mr_reset_rc_name(reset_reason));
+ do {
+ ssleep(1);
+ } while (mrioc->reset_in_progress == 1);
+ ioc_info(mrioc,
+ "returning previous reset result(%d) for the reset triggered by %s\n",
+ mrioc->prev_reset_result,
+ mpi3mr_reset_rc_name(reset_reason));
+ return mrioc->prev_reset_result;
}
+ ioc_info(mrioc, "controller reset is triggered by %s\n",
+ mpi3mr_reset_rc_name(reset_reason));
+
mrioc->reset_in_progress = 1;
+ mrioc->prev_reset_result = -1;
if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) &&
+ (reset_reason != MPI3MR_RESET_FROM_FIRMWARE) &&
(reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) {
for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mrioc->event_masks[i] = -1;
- retval = mpi3mr_issue_event_notification(mrioc);
-
- if (retval) {
- ioc_err(mrioc,
- "Failed to turn off events prior to reset %d\n",
- retval);
- }
+ dprint_reset(mrioc, "soft_reset_handler: masking events\n");
+ mpi3mr_issue_event_notification(mrioc);
}
mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT);
@@ -4177,8 +4121,8 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
out:
if (!retval) {
+ mrioc->diagsave_timeout = 0;
mrioc->reset_in_progress = 0;
- scsi_unblock_requests(mrioc->shost);
mpi3mr_rfresh_tgtdevs(mrioc);
mrioc->ts_update_counter = 0;
spin_lock_irqsave(&mrioc->watchdog_lock, flags);
@@ -4194,8 +4138,9 @@ out:
mrioc->reset_in_progress = 0;
retval = -1;
}
-
+ mrioc->prev_reset_result = retval;
mutex_unlock(&mrioc->reset_mutex);
- ioc_info(mrioc, "%s\n", ((retval == 0) ? "SUCCESS" : "FAILED"));
+ ioc_info(mrioc, "controller reset is %s\n",
+ ((retval == 0) ? "successful" : "failed"));
return retval;
}
@@ -3073,32 +3073,42 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost,
{
struct mpi3mr_ioc *mrioc = shost_priv(shost);
u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT;
+ u32 ioc_status = readl(&mrioc->sysif_regs->ioc_status);
- if (time >= (pe_timeout * HZ)) {
+ if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) ||
+ (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) {
+ ioc_err(mrioc, "port enable failed due to fault or reset\n");
+ mpi3mr_print_fault_info(mrioc);
+ mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+ mrioc->scan_started = 0;
mrioc->init_cmds.is_waiting = 0;
mrioc->init_cmds.callback = NULL;
mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
- ioc_err(mrioc, "%s :port enable request timed out\n", __func__);
- mrioc->is_driver_loading = 0;
- mpi3mr_soft_reset_handler(mrioc,
- MPI3MR_RESET_FROM_PE_TIMEOUT, 1);
}
- if (mrioc->scan_failed) {
- ioc_err(mrioc,
- "%s :port enable failed with (ioc_status=0x%08x)\n",
- __func__, mrioc->scan_failed);
- mrioc->is_driver_loading = 0;
- mrioc->stop_drv_processing = 1;
- return 1;
+ if (time >= (pe_timeout * HZ)) {
+ ioc_err(mrioc, "port enable failed due to time out\n");
+ mpi3mr_check_rh_fault_ioc(mrioc,
+ MPI3MR_RESET_FROM_PE_TIMEOUT);
+ mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR;
+ mrioc->scan_started = 0;
+ mrioc->init_cmds.is_waiting = 0;
+ mrioc->init_cmds.callback = NULL;
+ mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED;
}
if (mrioc->scan_started)
return 0;
- ioc_info(mrioc, "%s :port enable: SUCCESS\n", __func__);
+
+ if (mrioc->scan_failed) {
+ ioc_err(mrioc,
+ "port enable failed with status=0x%04x\n",
+ mrioc->scan_failed);
+ } else
+ ioc_info(mrioc, "port enable is successfully completed\n");
+
mpi3mr_start_watchdog(mrioc);
mrioc->is_driver_loading = 0;
-
return 1;
}
Detect asynchronous reset that occurred in the firmware by polling for reset history bit of IOC status register is set and if that bit is set, then the driver waits for the controller to become ready and then re-initialize the controller. Also reduce the time driver is waiting for the controller to acknowledge the reset action after issuing a specific reset action to the controller. The wait time is reduced from 510 seconds to 30 seconds. If the controller didn't acknowledge a specific reset action within the time interval then the driver marks the controller as unrecoverable instead of retrying two more times prior to giving up. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr.h | 12 +- drivers/scsi/mpi3mr/mpi3mr_fw.c | 233 ++++++++++++-------------------- drivers/scsi/mpi3mr/mpi3mr_os.c | 38 ++++-- 3 files changed, 120 insertions(+), 163 deletions(-)