diff mbox series

[v1,4/4] scsi: ufshpb: Add device reset HPB regions Infor handling for HPB device mode

Message ID 20220414220127.587917-5-huobean@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series several UFSHPB changes | expand

Commit Message

Bean Huo April 14, 2022, 10:01 p.m. UTC
From: Bean Huo <beanhuo@micron.com>

In UFS HPB Spec JESD220-3A,

"5.8. Active and inactive information upon power cycle
...
When the device is powered off by the host, the device may restore L2P map data
upon power up or build from the host’s HPB READ command. In case device powered
up and lost HPB information, device can signal to the host through HPB Sense data,
by setting HPB Operation as ‘2’ which will inform the host that device reset HPB
information."

So, for the HPB device mode, if the UFS device is reset by the RST_N pin, the active
regions's information in the device will be reset, and then the device will notify
the host side that it is recommended to deactivate all active region in the host
HPB memory.

Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 drivers/scsi/ufs/ufshpb.c | 73 ++++++++++++++++++++++++++++-----------
 1 file changed, 53 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index ac442f19d7f7..82ca0dd5097c 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -1143,6 +1143,39 @@  static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn)
 	spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
 	return ret;
 }
+/**
+ *ufshpb_update_region_inactive - update a region to be deactivated later
+ *@hpb: per-LU HPB instance
+ *@region_index: the region index will be activated later
+ */
+static void ufshpb_update_region_inactive(struct ufshpb_lu *hpb, int region_index)
+{
+	int subregion_index;
+	struct ufshpb_region *rgn;
+	struct ufshpb_subregion *srgn;
+
+	/*
+	 * Delete this region from acctive list and add it to inactive list
+	 */
+	spin_lock(&hpb->rsp_list_lock);
+	ufshpb_update_inactive_info(hpb, region_index);
+	spin_unlock(&hpb->rsp_list_lock);
+
+	rgn = hpb->rgn_tbl + region_index;
+
+	/*
+	 * Set subregion state to be HPB_SRGN_INVALID, there will no HPB read on this subregion
+	 */
+	spin_lock(&hpb->rgn_state_lock);
+	if (rgn->rgn_state != HPB_RGN_INACTIVE) {
+		for (subregion_index = 0; subregion_index < rgn->srgn_cnt; subregion_index++) {
+			srgn = rgn->srgn_tbl + subregion_index;
+			if (srgn->srgn_state == HPB_SRGN_VALID)
+				srgn->srgn_state = HPB_SRGN_INVALID;
+		}
+	}
+	spin_unlock(&hpb->rgn_state_lock);
+}
 
 static void ufshpb_rsp_req_region_update(struct ufshpb_lu *hpb,
 					 struct utp_hpb_rsp *rsp_field)
@@ -1202,25 +1235,8 @@  static void ufshpb_rsp_req_region_update(struct ufshpb_lu *hpb,
 
 	for (i = 0; i < rsp_field->inactive_rgn_cnt; i++) {
 		rgn_i = be16_to_cpu(rsp_field->hpb_inactive_field[i]);
-		dev_dbg(&hpb->sdev_ufs_lu->sdev_dev,
-			"inactivate(%d) region %d\n", i, rgn_i);
-
-		spin_lock(&hpb->rsp_list_lock);
-		ufshpb_update_inactive_info(hpb, rgn_i);
-		spin_unlock(&hpb->rsp_list_lock);
-
-		rgn = hpb->rgn_tbl + rgn_i;
-
-		spin_lock(&hpb->rgn_state_lock);
-		if (rgn->rgn_state != HPB_RGN_INACTIVE) {
-			for (srgn_i = 0; srgn_i < rgn->srgn_cnt; srgn_i++) {
-				srgn = rgn->srgn_tbl + srgn_i;
-				if (srgn->srgn_state == HPB_SRGN_VALID)
-					srgn->srgn_state = HPB_SRGN_INVALID;
-			}
-		}
-		spin_unlock(&hpb->rgn_state_lock);
-
+		dev_dbg(&hpb->sdev_ufs_lu->sdev_dev, "inactivate(%d) region %d\n", i, rgn_i);
+		ufshpb_update_region_inactive(hpb, rgn_i);
 	}
 
 out:
@@ -1255,7 +1271,10 @@  static void ufshpb_dev_reset_handler(struct ufs_hba *hba)
 
 	__shost_for_each_device(sdev, hba->host) {
 		hpb = ufshpb_get_hpb_data(sdev);
-		if (hpb && hpb->is_hcm)
+		if (!hpb)
+			continue;
+
+		if (hpb->is_hcm) {
 			/*
 			 * For the HPB host mode, in case device powered up and lost HPB
 			 * information, we will set the region flag to be RGN_FLAG_UPDATE,
@@ -1263,6 +1282,20 @@  static void ufshpb_dev_reset_handler(struct ufs_hba *hba)
 			 * in the UFS device).
 			 */
 			ufshpb_set_region_update(hpb);
+		} else {
+			/*
+			 * For the HPB device mode, we add all active regions to inactive list,
+			 * they will be inactivated later in ufshpb_map_work_handler()
+			 */
+			struct victim_select_info *lru_info = &hpb->lru_info;
+			struct ufshpb_region *rgn;
+
+			list_for_each_entry(rgn, &lru_info->lh_lru_rgn, list_lru_rgn)
+				ufshpb_update_region_inactive(hpb, rgn->rgn_idx);
+
+			if (ufshpb_get_state(hpb) == HPB_PRESENT)
+				queue_work(ufshpb_wq, &hpb->map_work);
+		}
 	}
 }