diff mbox series

[09/10] qla2xxx: edif: Fix slow session tear down

Message ID 20220608115849.16693-10-njavali@marvell.com (mailing list archive)
State Accepted
Headers show
Series Additional EDiF bug fixes | expand

Commit Message

Nilesh Javali June 8, 2022, 11:58 a.m. UTC
From: Quinn Tran <qutran@marvell.com>

User experience slow recovery when target device went through
a stop/start of the authentication application (app_stop/app_start).

Between the period of app_stop and app_start on the target device,
target device choose to send ELS Reject for any receive AUTH ELS command.
At this time, authentication application does not do els reject
if it encounters error.

Therefore, AUTH ELS reject signify authentication application
is not running. If driver pass up the AUTH ELS Reject to the
authentication application, then it would result in authentication
application retrying/resending the same AUTH ELS command again + delay.

As a work around, driver would trigger a session tear down where
it tell the local authentication application to also tear down.
At the next relogin, both side would be synchronize.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8e6831953e7c..d87c53bc014b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2245,9 +2245,9 @@  qla24xx_els_ct_entry(scsi_qla_host_t *v, struct req_que *req,
 				res = DID_ERROR << 16;
 			}
 
-			if (logit) {
-				if (sp->remap.remapped &&
-				    ((u8 *)sp->remap.rsp.buf)[0] == ELS_LS_RJT) {
+			if (sp->remap.remapped &&
+			    ((u8 *)sp->remap.rsp.buf)[0] == ELS_LS_RJT) {
+				if (logit) {
 					ql_dbg(ql_dbg_user, vha, 0x503f,
 					    "%s IOCB Done LS_RJT hdl=%x comp_status=0x%x\n",
 					    type, sp->handle, comp_status);
@@ -2259,18 +2259,24 @@  qla24xx_els_ct_entry(scsi_qla_host_t *v, struct req_que *req,
 						pkt)->total_byte_count),
 					    e->s_id[0], e->s_id[2], e->s_id[1],
 					    e->d_id[2], e->d_id[1], e->d_id[0]);
-				} else {
-					ql_log(ql_log_info, vha, 0x503f,
-					    "%s IOCB Done hdl=%x comp_status=0x%x\n",
-					    type, sp->handle, comp_status);
-					ql_log(ql_log_info, vha, 0x503f,
-					    "subcode 1=0x%x subcode 2=0x%x bytes=0x%x %02x%02x%02x -> %02x%02x%02x\n",
-					    fw_status[1], fw_status[2],
-					    le32_to_cpu(((struct els_sts_entry_24xx *)
-						pkt)->total_byte_count),
-					    e->s_id[0], e->s_id[2], e->s_id[1],
-					    e->d_id[2], e->d_id[1], e->d_id[0]);
 				}
+				if (sp->fcport && sp->fcport->flags & FCF_FCSP_DEVICE &&
+				    sp->type == SRB_ELS_CMD_HST_NOLOGIN) {
+					ql_dbg(ql_dbg_edif, vha, 0x911e,
+					    "%s rcv reject. Sched delete\n", __func__);
+					qlt_schedule_sess_for_deletion(sp->fcport);
+				}
+			} else if (logit) {
+				ql_log(ql_log_info, vha, 0x503f,
+				    "%s IOCB Done hdl=%x comp_status=0x%x\n",
+				    type, sp->handle, comp_status);
+				ql_log(ql_log_info, vha, 0x503f,
+				    "subcode 1=0x%x subcode 2=0x%x bytes=0x%x %02x%02x%02x -> %02x%02x%02x\n",
+				    fw_status[1], fw_status[2],
+				    le32_to_cpu(((struct els_sts_entry_24xx *)
+				    pkt)->total_byte_count),
+				    e->s_id[0], e->s_id[2], e->s_id[1],
+				    e->d_id[2], e->d_id[1], e->d_id[0]);
 			}
 		}
 		goto els_ct_done;