diff mbox series

[2/3] target: core: make hw_max_sectors store the sectors amount in blocks

Message ID 20220630122241.1658-3-a.kovaleva@yadro.com (mailing list archive)
State Changes Requested
Headers show
Series Make target send correct io limits | expand

Commit Message

Anastasia Kovaleva June 30, 2022, 12:22 p.m. UTC
By default, hw_max_sectors stores its value in 512 blocks in iblock,
despite the fact that the block size can be 4096 bytes. Change
hw_max_sectors to store the number of sectors in hw_block_size blocks.

Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
---
 drivers/target/target_core_iblock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Mike Christie July 7, 2022, 9:38 p.m. UTC | #1
On 6/30/22 7:22 AM, Anastasia Kovaleva wrote:
> By default, hw_max_sectors stores its value in 512 blocks in iblock,
> despite the fact that the block size can be 4096 bytes. Change
> hw_max_sectors to store the number of sectors in hw_block_size blocks.
> 
> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
> ---
>  drivers/target/target_core_iblock.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
> index 378c80313a0f..532a30b31a7c 100644
> --- a/drivers/target/target_core_iblock.c
> +++ b/drivers/target/target_core_iblock.c
> @@ -116,7 +116,8 @@ static int iblock_configure_device(struct se_device *dev)
>  	q = bdev_get_queue(bd);
>  
>  	dev->dev_attrib.hw_block_size = bdev_logical_block_size(bd);
> -	dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
> +	dev->dev_attrib.hw_max_sectors = mult_frac(queue_max_hw_sectors(q),
> +		SECTOR_SIZE, dev->dev_attrib.hw_block_size);

Just another nit. I think it's more common in the target code to put the
sector_size and hw_block_size on different lines. It would be nicest to tab
them over to line with the opening "(" but I guess the hw_block_size line
would be over 80, so something like this is ok:

	dev->dev_attrib.hw_max_sectors = mult_frac(queue_max_hw_sectors(q),
					SECTOR_SIZE,
					dev->dev_attrib.hw_block_size);




>  	dev->dev_attrib.hw_queue_depth = q->nr_requests;
>  
>  	if (target_configure_unmap_from_queue(&dev->dev_attrib, bd))
diff mbox series

Patch

diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 378c80313a0f..532a30b31a7c 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -116,7 +116,8 @@  static int iblock_configure_device(struct se_device *dev)
 	q = bdev_get_queue(bd);
 
 	dev->dev_attrib.hw_block_size = bdev_logical_block_size(bd);
-	dev->dev_attrib.hw_max_sectors = queue_max_hw_sectors(q);
+	dev->dev_attrib.hw_max_sectors = mult_frac(queue_max_hw_sectors(q),
+		SECTOR_SIZE, dev->dev_attrib.hw_block_size);
 	dev->dev_attrib.hw_queue_depth = q->nr_requests;
 
 	if (target_configure_unmap_from_queue(&dev->dev_attrib, bd))