diff mbox series

[v2,6/8] scsi: libsas: use sas_phy_match_dev_addr() instead of open coded

Message ID 20220924073455.2186805-7-yanaijie@huawei.com (mailing list archive)
State Superseded
Headers show
Series scsi: libsas: sas address comparation refactor | expand

Commit Message

Jason Yan Sept. 24, 2022, 7:34 a.m. UTC
The sas address comparation of domain device and expander phy is open
coded. Now we can replace it with sas_phy_match_dev_addr().

Signed-off-by: Jason Yan <yanaijie@huawei.com>
---
 drivers/scsi/libsas/sas_expander.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

Comments

John Garry Sept. 26, 2022, 11:43 a.m. UTC | #1
On 24/09/2022 08:34, Jason Yan wrote:
> @@ -2115,8 +2109,7 @@ int sas_find_attached_phy(struct expander_device *ex_dev,
>   
>   	for (phy_id = 0; phy_id < ex_dev->num_phys; phy_id++) {
>   		phy = &ex_dev->ex_phy[phy_id];
> -		if (SAS_ADDR(phy->attached_sas_addr)
> -			== SAS_ADDR(dev->sas_addr))
> +		if (sas_phy_match_dev_addr(dev, phy))

It would be nice if the series was arranged such that 
sas_phy_match_dev_addr() is available when you introduce 
sas_phy_match_dev_addr()

>   			return phy_id;
>   	}

Thanks,
John
Jason Yan Sept. 26, 2022, 12:18 p.m. UTC | #2
On 2022/9/26 19:43, John Garry wrote:
> On 24/09/2022 08:34, Jason Yan wrote:
>> @@ -2115,8 +2109,7 @@ int sas_find_attached_phy(struct expander_device 
>> *ex_dev,
>>       for (phy_id = 0; phy_id < ex_dev->num_phys; phy_id++) {
>>           phy = &ex_dev->ex_phy[phy_id];
>> -        if (SAS_ADDR(phy->attached_sas_addr)
>> -            == SAS_ADDR(dev->sas_addr))
>> +        if (sas_phy_match_dev_addr(dev, phy))
> 
> It would be nice if the series was arranged such that 
> sas_phy_match_dev_addr() is available when you introduce 
> sas_phy_match_dev_addr()


I assume you mean sas_phy_match_dev_addr() should available before 
introducing sas_find_attached_phy().

Yes, I can make that change.

Thanks,
Jason

> 
>>               return phy_id;
>>       }
> 
> Thanks,
> John
> .
diff mbox series

Patch

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index a5effff3d1c3..b2b5103c3e76 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -738,9 +738,7 @@  static void sas_ex_get_linkrate(struct domain_device *parent,
 		    phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if (SAS_ADDR(phy->attached_sas_addr) ==
-		    SAS_ADDR(child->sas_addr)) {
-
+		if (sas_phy_match_dev_addr(child, phy)) {
 			child->min_linkrate = min(parent->min_linkrate,
 						  phy->linkrate);
 			child->max_linkrate = max(parent->max_linkrate,
@@ -1012,8 +1010,7 @@  static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 		sas_add_parent_port(dev, phy_id);
 		return 0;
 	}
-	if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
-			    SAS_ADDR(dev->parent->sas_addr))) {
+	if (dev->parent && sas_phy_match_dev_addr(dev->parent, ex_phy)) {
 		sas_add_parent_port(dev, phy_id);
 		if (ex_phy->routing_attr == TABLE_ROUTING)
 			sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
@@ -1312,7 +1309,7 @@  static int sas_check_parent_topology(struct domain_device *child)
 		    parent_phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+		if (sas_phy_match_dev_addr(child, parent_phy))
 			continue;
 
 		child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
@@ -1522,8 +1519,7 @@  static int sas_configure_parent(struct domain_device *parent,
 		struct ex_phy *phy = &ex_parent->ex_phy[i];
 
 		if ((phy->routing_attr == TABLE_ROUTING) &&
-		    (SAS_ADDR(phy->attached_sas_addr) ==
-		     SAS_ADDR(child->sas_addr))) {
+		    sas_phy_match_dev_addr(child, phy)) {
 			res = sas_configure_phy(parent, i, sas_addr, include);
 			if (res)
 				return res;
@@ -1858,8 +1854,7 @@  static void sas_unregister_devs_sas_addr(struct domain_device *parent,
 	if (last) {
 		list_for_each_entry_safe(child, n,
 			&ex_dev->children, siblings) {
-			if (SAS_ADDR(child->sas_addr) ==
-			    SAS_ADDR(phy->attached_sas_addr)) {
+			if (sas_phy_match_dev_addr(child, phy)) {
 				set_bit(SAS_DEV_GONE, &child->state);
 				if (dev_is_expander(child->dev_type))
 					sas_unregister_ex_tree(parent->port, child);
@@ -1941,8 +1936,7 @@  static int sas_discover_new(struct domain_device *dev, int phy_id)
 	if (res)
 		return res;
 	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
-		if (SAS_ADDR(child->sas_addr) ==
-		    SAS_ADDR(ex_phy->attached_sas_addr)) {
+		if (sas_phy_match_dev_addr(child, ex_phy)) {
 			if (dev_is_expander(child->dev_type))
 				res = sas_discover_bfs_by_root(child);
 			break;
@@ -2115,8 +2109,7 @@  int sas_find_attached_phy(struct expander_device *ex_dev,
 
 	for (phy_id = 0; phy_id < ex_dev->num_phys; phy_id++) {
 		phy = &ex_dev->ex_phy[phy_id];
-		if (SAS_ADDR(phy->attached_sas_addr)
-			== SAS_ADDR(dev->sas_addr))
+		if (sas_phy_match_dev_addr(dev, phy))
 			return phy_id;
 	}