diff mbox series

[v4,3/8] scsi: pm8001: use sas_find_attached_phy() instead of open coded

Message ID 20220927032605.78103-4-yanaijie@huawei.com (mailing list archive)
State Superseded
Headers show
Series scsi: libsas: sas address comparison refactor | expand

Commit Message

Jason Yan Sept. 27, 2022, 3:26 a.m. UTC
The attached phy finding is open coded. Now we can replace it with
sas_find_attached_phy().

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
---
 drivers/scsi/pm8001/pm8001_sas.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

Comments

John Garry Sept. 27, 2022, 8:34 a.m. UTC | #1
On 27/09/2022 04:26, Jason Yan wrote:
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -645,22 +645,16 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
>   	pm8001_device->dcompletion = &completion;
>   	if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
>   		int phy_id;
> -		struct ex_phy *phy;
> -		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
> -		phy_id++) {
> -			phy = &parent_dev->ex_dev.ex_phy[phy_id];
> -			if (SAS_ADDR(phy->attached_sas_addr)
> -				== SAS_ADDR(dev->sas_addr)) {
> -				pm8001_device->attached_phy = phy_id;
> -				break;
> -			}
> -		}
> -		if (phy_id == parent_dev->ex_dev.num_phys) {
> +
> +		phy_id = sas_find_attached_phy(&parent_dev->ex_dev, dev);
> +		if (phy_id == -ENODEV) {
>   			pm8001_dbg(pm8001_ha, FAIL,
>   				   "Error: no attached dev:%016llx at ex:%016llx.\n",
>   				   SAS_ADDR(dev->sas_addr),
>   				   SAS_ADDR(parent_dev->sas_addr));
>   			res = -1;

I think that you can just pass the linux error code (-ENODEV) back here.

And for hisi_sas we change to -EINVAL for this code. I don't think it's 
required, so I think that we can pass -ENODEV back there also. Using 
-EINVAL seems to come from when the code was originally added in 
abda97c2fe874 and from a quick glance libsas does not seem to have 
special processing for -EINVAL.

Thanks,
John

> +		} else {
> +			pm8001_device->attached_phy = phy_id;
>   		}
>   	} else {
>   		if (dev->dev_type == SAS_SATA
Jason Yan Sept. 27, 2022, 11:25 a.m. UTC | #2
On 2022/9/27 16:34, John Garry wrote:
> On 27/09/2022 04:26, Jason Yan wrote:
>> +++ b/drivers/scsi/pm8001/pm8001_sas.c
>> @@ -645,22 +645,16 @@ static int pm8001_dev_found_notify(struct 
>> domain_device *dev)
>>       pm8001_device->dcompletion = &completion;
>>       if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
>>           int phy_id;
>> -        struct ex_phy *phy;
>> -        for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
>> -        phy_id++) {
>> -            phy = &parent_dev->ex_dev.ex_phy[phy_id];
>> -            if (SAS_ADDR(phy->attached_sas_addr)
>> -                == SAS_ADDR(dev->sas_addr)) {
>> -                pm8001_device->attached_phy = phy_id;
>> -                break;
>> -            }
>> -        }
>> -        if (phy_id == parent_dev->ex_dev.num_phys) {
>> +
>> +        phy_id = sas_find_attached_phy(&parent_dev->ex_dev, dev);
>> +        if (phy_id == -ENODEV) {
>>               pm8001_dbg(pm8001_ha, FAIL,
>>                      "Error: no attached dev:%016llx at ex:%016llx.\n",
>>                      SAS_ADDR(dev->sas_addr),
>>                      SAS_ADDR(parent_dev->sas_addr));
>>               res = -1;
> 
> I think that you can just pass the linux error code (-ENODEV) back here.
> 
> And for hisi_sas we change to -EINVAL for this code. I don't think it's 
> required, so I think that we can pass -ENODEV back there also. Using 
> -EINVAL seems to come from when the code was originally added in 
> abda97c2fe874 and from a quick glance libsas does not seem to have 
> special processing for -EINVAL.
> 

Yes, libsas does not have any special processing for the return value, 
so there is no difference in what value we return here. But I agree with 
you that return -ENODEV is better here because we can keep it consistent 
with the return value of sas_find_attached_phy().

Will update.

Thanks,
Jason

> Thanks,
> John
> 
>> +        } else {
>> +            pm8001_device->attached_phy = phy_id;
>>           }
>>       } else {
>>           if (dev->dev_type == SAS_SATA
> 
> .
diff mbox series

Patch

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 8e3f2f9ddaac..d15a824bcea6 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -645,22 +645,16 @@  static int pm8001_dev_found_notify(struct domain_device *dev)
 	pm8001_device->dcompletion = &completion;
 	if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
 		int phy_id;
-		struct ex_phy *phy;
-		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
-		phy_id++) {
-			phy = &parent_dev->ex_dev.ex_phy[phy_id];
-			if (SAS_ADDR(phy->attached_sas_addr)
-				== SAS_ADDR(dev->sas_addr)) {
-				pm8001_device->attached_phy = phy_id;
-				break;
-			}
-		}
-		if (phy_id == parent_dev->ex_dev.num_phys) {
+
+		phy_id = sas_find_attached_phy(&parent_dev->ex_dev, dev);
+		if (phy_id == -ENODEV) {
 			pm8001_dbg(pm8001_ha, FAIL,
 				   "Error: no attached dev:%016llx at ex:%016llx.\n",
 				   SAS_ADDR(dev->sas_addr),
 				   SAS_ADDR(parent_dev->sas_addr));
 			res = -1;
+		} else {
+			pm8001_device->attached_phy = phy_id;
 		}
 	} else {
 		if (dev->dev_type == SAS_SATA_DEV) {