diff mbox series

[v3,08/20] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC

Message ID 20221123074826.95369-9-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series ufs: qcom: Add HS-G4 support | expand

Commit Message

Manivannan Sadhasivam Nov. 23, 2022, 7:48 a.m. UTC
UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance. This
also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 66 ++++++++++++++++++++++++-
 1 file changed, 65 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 98ebaf898a50..d39ee28fb6a3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -463,6 +463,34 @@  static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
 };
 
+static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xe5),
+};
+
+static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x2c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
+};
+
 static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
@@ -825,6 +853,42 @@  static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
 	.phy_status		= PHYSTATUS,
 };
 
+static const struct qmp_phy_cfg sm8250_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.tbls = {
+		.serdes		= sm8150_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_serdes),
+		.tx		= sm8150_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_tx),
+		.rx		= sm8150_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_rx),
+		.pcs		= sm8150_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8150_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx		= sm8250_ufsphy_hs_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
+		.rx		= sm8250_ufsphy_hs_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx),
+		.pcs		= sm8150_ufsphy_hs_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8150_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.phy_status		= PHYSTATUS,
+};
+
 static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1288,7 +1352,7 @@  static const struct of_device_id qmp_ufs_of_match_table[] = {
 		.data = &sm8150_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sm8250-qmp-ufs-phy",
-		.data = &sm8150_ufsphy_cfg,
+		.data = &sm8250_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sm8350-qmp-ufs-phy",
 		.data = &sm8350_ufsphy_cfg,