diff mbox series

[5/6] scsi: libsas: factor out sas_ata_add_dev()

Message ID 20221204081643.3835966-6-yanaijie@huawei.com (mailing list archive)
State Superseded
Headers show
Series scsi: libsas: Some coding style fixes and cleanups | expand

Commit Message

Jason Yan Dec. 4, 2022, 8:16 a.m. UTC
Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a sata
related interface. Also follow the standard coding style to define an
inline empty function when CONFIG_SCSI_SAS_ATA is not enabled.

Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
---
 drivers/scsi/libsas/sas_ata.c      | 62 ++++++++++++++++++++++++++++++
 drivers/scsi/libsas/sas_expander.c | 54 +-------------------------
 include/scsi/sas_ata.h             |  9 +++++
 3 files changed, 73 insertions(+), 52 deletions(-)

Comments

John Garry Dec. 5, 2022, 9:24 a.m. UTC | #1
On 04/12/2022 08:16, Jason Yan wrote:
> +static inline int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
> +				  struct domain_device *child, int phy_id)
> +{
> +	pr_notice("ATA is not enabled, target proto 0x%x at %016llx:0x%x\n",

nit: how about add "SCSI_SAS_ATA is not enabled ..." or use similar to 
the log in sas_discover_domain()?

> +		  phy->attached_tproto, SAS_ADDR(parent->sas_addr), phy_id);
> +	return -ENODEV;
Jason Yan Dec. 8, 2022, 7:26 a.m. UTC | #2
On 2022/12/5 17:24, John Garry wrote:
> On 04/12/2022 08:16, Jason Yan wrote:
>> +static inline int sas_ata_add_dev(struct domain_device *parent, 
>> struct ex_phy *phy,
>> +                  struct domain_device *child, int phy_id)
>> +{
>> +    pr_notice("ATA is not enabled, target proto 0x%x at %016llx:0x%x\n",
> 
> nit: how about add "SCSI_SAS_ATA is not enabled ..." or use similar to 
> the log in sas_discover_domain()?

Yes, make sense. Will update.

Thanks,
Jason

> 
>> +          phy->attached_tproto, SAS_ADDR(parent->sas_addr), phy_id);
>> +    return -ENODEV;
> 
> .
diff mbox series

Patch

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 01b6175a8960..f440203eb280 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -677,6 +677,68 @@  void sas_probe_sata(struct asd_sas_port *port)
 
 }
 
+int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+		    struct domain_device *child, int phy_id)
+{
+	struct sas_rphy *rphy;
+	int ret;
+
+	if (child->linkrate > parent->min_linkrate) {
+		struct sas_phy *cphy = child->phy;
+		enum sas_linkrate min_prate = cphy->minimum_linkrate,
+			parent_min_lrate = parent->min_linkrate,
+			min_linkrate = (min_prate > parent_min_lrate) ?
+					parent_min_lrate : 0;
+		struct sas_phy_linkrates rates = {
+			.maximum_linkrate = parent->min_linkrate,
+			.minimum_linkrate = min_linkrate,
+		};
+
+		pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
+			  SAS_ADDR(child->sas_addr), phy_id);
+		ret = sas_smp_phy_control(parent, phy_id,
+					  PHY_FUNC_LINK_RESET, &rates);
+		if (ret) {
+			pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
+			       SAS_ADDR(child->sas_addr), phy_id, ret);
+			return ret;
+		}
+		pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
+			  SAS_ADDR(child->sas_addr), phy_id);
+		child->linkrate = child->min_linkrate;
+	}
+	ret = sas_get_ata_info(child, phy);
+	if (ret)
+		return ret;
+
+	sas_init_dev(child);
+	ret = sas_ata_init(child);
+	if (ret)
+		return ret;
+
+	rphy = sas_end_device_alloc(phy->port);
+	if (!rphy)
+		return ret;
+
+	rphy->identify.phy_identifier = phy_id;
+	child->rphy = rphy;
+	get_device(&rphy->dev);
+
+	list_add_tail(&child->disco_list_node, &parent->port->disco_list);
+
+	ret = sas_ata_notify_lldd_dev_found(child);
+	if (ret) {
+		pr_notice("notify lldd for device %16llx at %016llx:%02d returned 0x%x\n",
+			  SAS_ADDR(child->sas_addr),
+			  SAS_ADDR(parent->sas_addr), phy_id, ret);
+		sas_rphy_free(child->rphy);
+		list_del(&child->disco_list_node);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
 {
 	struct domain_device *dev, *n;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 82ea7560a888..747f4fc795f4 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -785,61 +785,11 @@  static struct domain_device *sas_ex_discover_end_dev(
 	sas_ex_get_linkrate(parent, child, phy);
 	sas_device_set_phy(child, phy->port);
 
-#ifdef CONFIG_SCSI_SAS_ATA
 	if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
-		if (child->linkrate > parent->min_linkrate) {
-			struct sas_phy *cphy = child->phy;
-			enum sas_linkrate min_prate = cphy->minimum_linkrate,
-				parent_min_lrate = parent->min_linkrate,
-				min_linkrate = (min_prate > parent_min_lrate) ?
-					       parent_min_lrate : 0;
-			struct sas_phy_linkrates rates = {
-				.maximum_linkrate = parent->min_linkrate,
-				.minimum_linkrate = min_linkrate,
-			};
-			int ret;
-
-			pr_notice("ex %016llx phy%02d SATA device linkrate > min pathway connection rate, attempting to lower device linkrate\n",
-				   SAS_ADDR(child->sas_addr), phy_id);
-			ret = sas_smp_phy_control(parent, phy_id,
-						  PHY_FUNC_LINK_RESET, &rates);
-			if (ret) {
-				pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",
-				       SAS_ADDR(child->sas_addr), phy_id, ret);
-				goto out_free;
-			}
-			pr_notice("ex %016llx phy%02d SATA device set linkrate successfully\n",
-				  SAS_ADDR(child->sas_addr), phy_id);
-			child->linkrate = child->min_linkrate;
-		}
-		res = sas_get_ata_info(child, phy);
-		if (res)
-			goto out_free;
-
-		sas_init_dev(child);
-		res = sas_ata_init(child);
+		res = sas_ata_add_dev(parent, phy, child, phy_id);
 		if (res)
 			goto out_free;
-		rphy = sas_end_device_alloc(phy->port);
-		if (!rphy)
-			goto out_free;
-		rphy->identify.phy_identifier = phy_id;
-
-		child->rphy = rphy;
-		get_device(&rphy->dev);
-
-		list_add_tail(&child->disco_list_node, &parent->port->disco_list);
-
-		res = sas_ata_notify_lldd_dev_found(child);
-		if (res) {
-			pr_notice("notify lldd for device %16llx at %016llx:%02d returned 0x%x\n",
-				  SAS_ADDR(child->sas_addr),
-				  SAS_ADDR(parent->sas_addr), phy_id, res);
-			goto out_list_del;
-		}
-	} else
-#endif
-	  if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
+	} else if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
 		child->dev_type = SAS_END_DEVICE;
 		rphy = sas_end_device_alloc(phy->port);
 		/* FIXME: error handling */
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index a3857595ba55..23a0853a5a0a 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -37,6 +37,8 @@  int sas_execute_ata_cmd(struct domain_device *device, u8 *fis,
 			int force_phy_id);
 int smp_ata_check_ready_type(struct ata_link *link);
 int sas_ata_notify_lldd_dev_found(struct domain_device *dev);
+int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+		    struct domain_device *child, int phy_id);
 #else
 
 
@@ -109,6 +111,13 @@  static inline int sas_ata_notify_lldd_dev_found(struct domain_device *dev)
 	pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
 	return -ENXIO;
 }
+static inline int sas_ata_add_dev(struct domain_device *parent, struct ex_phy *phy,
+				  struct domain_device *child, int phy_id)
+{
+	pr_notice("ATA is not enabled, target proto 0x%x at %016llx:0x%x\n",
+		  phy->attached_tproto, SAS_ADDR(parent->sas_addr), phy_id);
+	return -ENODEV;
+}
 #endif
 
 #endif /* _SAS_ATA_H_ */