diff mbox series

[v2,08/11] qla2xxx: Fix erroneous link down

Message ID 20221219110748.7039-9-njavali@marvell.com (mailing list archive)
State Accepted
Headers show
Series Misc. qla2xxx driver bug fixes | expand

Commit Message

Nilesh Javali Dec. 19, 2022, 11:07 a.m. UTC 
From: Quinn Tran <qutran@marvell.com>

After adapter reset, the appearance of link is not recovered,
the devices were not rediscovered.
This is result of a race condition between adapter reset (abort_isp)
and the topology scan.
During adapter reset, the ABORT_ISP_ACTIVE flag is set.
Topology scan usually occurred after adapter reset.
In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.

kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.

Allow adapter reset to complete before any scan can start.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 36d3cecab20e..2d86f804872b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -7094,9 +7094,12 @@  qla2x00_do_dpc(void *data)
 			}
 		}
 loop_resync_check:
-		if (test_and_clear_bit(LOOP_RESYNC_NEEDED,
+		if (!qla2x00_reset_active(base_vha) &&
+		    test_and_clear_bit(LOOP_RESYNC_NEEDED,
 		    &base_vha->dpc_flags)) {
-
+			/*
+			 * Allow abort_isp to complete before moving on to scanning.
+			 */
 			ql_dbg(ql_dbg_dpc, base_vha, 0x400f,
 			    "Loop resync scheduled.\n");