diff mbox series

[v5,11/23] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC

Message ID 20221222141001.54849-12-manivannan.sadhasivam@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series ufs: qcom: Add HS-G4 support | expand

Commit Message

Manivannan Sadhasivam Dec. 22, 2022, 2:09 p.m. UTC 
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 75e55c4181c9..96e03d4249da 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -935,6 +935,14 @@  static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
 		.serdes		= sm8350_ufsphy_hs_b_serdes,
 		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
 	},
+	.tbls_hs_g4 = {
+		.tx		= sm8350_ufsphy_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+		.rx		= sm8350_ufsphy_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+		.pcs		= sm8350_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+	},
 	.clk_list		= sm8450_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,