| Message ID | 20230217071705.2857-1-liubo03@inspur.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | scsi: lpfc: Fix double word in comments | expand |
Hi-- On 2/16/23 23:17, Bo Liu wrote: > Remove the repeated word "the" in comments. > > Signed-off-by: Bo Liu <liubo03@inspur.com> > --- > drivers/scsi/lpfc/lpfc_attr.c | 10 +++++----- > drivers/scsi/lpfc/lpfc_els.c | 2 +- > drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +- > drivers/scsi/lpfc/lpfc_init.c | 4 ++-- > drivers/scsi/lpfc/lpfc_mbox.c | 4 ++-- > drivers/scsi/lpfc/lpfc_nvmet.c | 2 +- > drivers/scsi/lpfc/lpfc_sli.c | 2 +- > 7 files changed, 13 insertions(+), 13 deletions(-) > > diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c > index 76c3434f8976..1a32b3f93d77 100644 > --- a/drivers/scsi/lpfc/lpfc_attr.c > +++ b/drivers/scsi/lpfc/lpfc_attr.c > @@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev, > > /** > * lpfc_enable_bbcr_set: Sets an attribute value. > - * @phba: pointer the the adapter structure. pointer to the adapter structure. Same for all of these: > + * @phba: pointer the adapter structure. > * @val: integer attribute value. > * > * Description: > @@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ > * takes a default argument, a minimum and maximum argument. > * > * lpfc_##attr##_init: Initializes an attribute. > - * @phba: pointer the the adapter structure. > + * @phba: pointer the adapter structure. > * @val: integer attribute value. > * > * Validates the min and max values then sets the adapter config field > @@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \ > * into a function with the name lpfc_hba_queue_depth_set > * > * lpfc_##attr##_set: Sets an attribute value. > - * @phba: pointer the the adapter structure. > + * @phba: pointer the adapter structure. > * @val: integer attribute value. > * > * Description: > @@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ > * lpfc_##attr##_init: validates the min and max values then sets the > * adapter config field accordingly, or uses the default if out of range > * and prints an error message. > - * @phba: pointer the the adapter structure. > + * @phba: pointer the adapter structure. > * @val: integer attribute value. > * > * Returns: > @@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \ > * lpfc_##attr##_set: validates the min and max values then sets the > * adapter config field if in the valid range. prints error message > * and does not set the parameter if invalid. > - * @phba: pointer the the adapter structure. > + * @phba: pointer the adapter structure. > * @val: integer attribute value. > * > * Returns: > diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c > index 9858b1743769..cebb3d7598e5 100644 > --- a/drivers/scsi/lpfc/lpfc_mbox.c > +++ b/drivers/scsi/lpfc/lpfc_mbox.c > @@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox) > * information via a READ_FCF mailbox command. This mailbox command also is used > * to indicate where received unsolicited frames from this FCF will be sent. By > * default this routine will set up the FCF to forward all unsolicited frames > - * the the RQ ID passed in the @phba. This can be overridden by the caller for to the > + * the RQ ID passed in the @phba. This can be overridden by the caller for > * more complicated setups. > **/ > void > @@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) > * information via a READ_FCF mailbox command. This mailbox command also is used > * to indicate where received unsolicited frames from this FCF will be sent. By > * default this routine will set up the FCF to forward all unsolicited frames > - * the the RQ ID passed in the @phba. This can be overridden by the caller for to the > + * the RQ ID passed in the @phba. This can be overridden by the caller for > * more complicated setups. > **/ > void
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 76c3434f8976..1a32b3f93d77 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev, /** * lpfc_enable_bbcr_set: Sets an attribute value. - * @phba: pointer the the adapter structure. + * @phba: pointer the adapter structure. * @val: integer attribute value. * * Description: @@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * takes a default argument, a minimum and maximum argument. * * lpfc_##attr##_init: Initializes an attribute. - * @phba: pointer the the adapter structure. + * @phba: pointer the adapter structure. * @val: integer attribute value. * * Validates the min and max values then sets the adapter config field @@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \ * into a function with the name lpfc_hba_queue_depth_set * * lpfc_##attr##_set: Sets an attribute value. - * @phba: pointer the the adapter structure. + * @phba: pointer the adapter structure. * @val: integer attribute value. * * Description: @@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * lpfc_##attr##_init: validates the min and max values then sets the * adapter config field accordingly, or uses the default if out of range * and prints an error message. - * @phba: pointer the the adapter structure. + * @phba: pointer the adapter structure. * @val: integer attribute value. * * Returns: @@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \ * lpfc_##attr##_set: validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. - * @phba: pointer the the adapter structure. + * @phba: pointer the adapter structure. * @val: integer attribute value. * * Returns: diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 569639dc8b2c..cf55236a22ca 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -8886,7 +8886,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, * @rrq: Pointer to the rrq struct. * * Build a ELS RRQ command and send it to the target. If the issue_iocb is - * Successful the the completion handler will clear the RRQ. + * Successful the completion handler will clear the RRQ. * * Return codes * 0 - Successfully sent rrq els iocb. diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index a6df0a5b4006..32a2181c45f9 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2459,7 +2459,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, * @phba: pointer to lpfc hba data structure. * @fcf_index: the index of the fcf record to update * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED - * flag so the the round robin slection for the particular priority level + * flag so the round robin slection for the particular priority level * will try a different fcf record that does not have this bit set. * If the fcf record is re-read for any reason this flag is cleared brfore * adding it to the priority list. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 6eb4085a3a22..02024f2c758f 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5502,7 +5502,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba, bf_set(lpfc_mbx_read_top_link_spd, la, (bf_get(lpfc_acqe_link_speed, acqe_link))); - /* Fake the the following irrelvant fields */ + /* Fake the following irrelvant fields */ bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT); bf_set(lpfc_mbx_read_top_alpa_granted, la, 0); bf_set(lpfc_mbx_read_top_il, la, 0); @@ -12549,7 +12549,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) /* Mark CPU as IRQ not assigned by the kernel */ cpup->flag |= LPFC_CPU_MAP_UNASSIGN; - /* If so, find a new_cpup thats on the the SAME + /* If so, find a new_cpup thats on the SAME * phys_id as cpup. start_cpu will start where we * left off so all unassigned entries don't get assgined * the IRQ of the first entry. diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 9858b1743769..cebb3d7598e5 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox) * information via a READ_FCF mailbox command. This mailbox command also is used * to indicate where received unsolicited frames from this FCF will be sent. By * default this routine will set up the FCF to forward all unsolicited frames - * the the RQ ID passed in the @phba. This can be overridden by the caller for + * the RQ ID passed in the @phba. This can be overridden by the caller for * more complicated setups. **/ void @@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) * information via a READ_FCF mailbox command. This mailbox command also is used * to indicate where received unsolicited frames from this FCF will be sent. By * default this routine will set up the FCF to forward all unsolicited frames - * the the RQ ID passed in the @phba. This can be overridden by the caller for + * the RQ ID passed in the @phba. This can be overridden by the caller for * more complicated setups. **/ void diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c index f7cfac0da9b6..7517dd55fe91 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -1469,7 +1469,7 @@ lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba) if (!infop) return; - /* Cycle the the entire CPU context list for every MRQ */ + /* Cycle the entire CPU context list for every MRQ */ for (i = 0; i < phba->cfg_nvmet_mrq; i++) { for_each_present_cpu(j) { infop = lpfc_get_ctx_list(phba, j, i); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index edbd81c3b643..c5b69f313af3 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -20804,7 +20804,7 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status, * the offset after the write object mailbox has completed. @size is used to * determine the end of the object and whether the eof bit should be set. * - * Return 0 is successful and offset will contain the the new offset to use + * Return 0 is successful and offset will contain the new offset to use * for the next write. * Return negative value for error cases. **/
Remove the repeated word "the" in comments. Signed-off-by: Bo Liu <liubo03@inspur.com> --- drivers/scsi/lpfc/lpfc_attr.c | 10 +++++----- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +- drivers/scsi/lpfc/lpfc_init.c | 4 ++-- drivers/scsi/lpfc/lpfc_mbox.c | 4 ++-- drivers/scsi/lpfc/lpfc_nvmet.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 2 +- 7 files changed, 13 insertions(+), 13 deletions(-)