diff mbox series

[3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p

Message ID 20230331195920.582620-4-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series arm64: qcom: sa8775p: add support for UFS | expand

Commit Message

Bartosz Golaszewski March 31, 2023, 7:59 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add QMP PHY config for sa8775p and add support for the new compatible.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 994ddd5d4a81..126bd47c3fa0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -823,6 +823,41 @@  static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
 	.no_pcs_sw_reset	= true,
 };
 
+
+static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes		= sm8350_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_serdes),
+		.tx		= sm8350_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_tx),
+		.rx		= sm8350_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_rx),
+		.pcs		= sm8350_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8350_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx		= sm8350_ufsphy_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+		.rx		= sm8350_ufsphy_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+		.pcs		= sm8350_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+	},
+	.clk_list		= sm8450_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= ufsphy_v5_regs_layout,
+};
+
 static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1542,6 +1577,9 @@  static const struct of_device_id qmp_ufs_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8998-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sa8775p-qmp-ufs-phy",
+		.data = &sa8775p_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sc8180x-qmp-ufs-phy",
 		.data = &sm8150_ufsphy_cfg,