diff mbox series

scsi: libsas: fix set zero-address when device-type != NO_DEVICE

Message ID 20231020024240.7708-1-yangxingui@huawei.com (mailing list archive)
State Changes Requested
Headers show
Series scsi: libsas: fix set zero-address when device-type != NO_DEVICE | expand

Commit Message

yangxingui Oct. 20, 2023, 2:42 a.m. UTC
phy->attached_sas_addr will be set to a zero-address when
phy->linkrate < SAS_LINK_RATE_1_5_GBPS but device-type != NO_DEVICE,
and it may trigger BUG() as follows when do revalidate with zero-address:

[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
[562240.085064] ------------[ cut here ]------------
[562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
[562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
[562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 0x0000000003bcbebf)
[562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain [libsas]
[562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
[562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.479751] sp : ffff0000300cfa70
[562240.674822] Call trace:
[562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
[562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
[562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
[562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
[562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
[562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
[562240.756014]  process_one_work+0x1b4/0x448
[562240.764548]  worker_thread+0x54/0x468
[562240.772562]  kthread+0x134/0x138
[562240.779989]  ret_from_fork+0x10/0x18

So set a zero-address for phy->attached_sas_addr only when
phy->attached_dev_type == NO_DEVICE.

Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
---
 drivers/scsi/libsas/sas_expander.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Jason Yan Oct. 20, 2023, 3:24 a.m. UTC | #1
On 2023/10/20 10:42, Xingui Yang wrote:
> phy->attached_sas_addr will be set to a zero-address when
> phy->linkrate < SAS_LINK_RATE_1_5_GBPS but device-type != NO_DEVICE,
> and it may trigger BUG() as follows when do revalidate with zero-address:

Hi  Xingui,

Why is this zero-addressed PHY added to another port? A zero-addressed 
PHY should not belong to any port.

Thanks,
Jason

> 
> [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
> [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
> [562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
> [562240.085064] ------------[ cut here ]------------
> [562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
> [562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
> [562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 0x0000000003bcbebf)
> [562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain [libsas]
> [562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
> [562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
> [562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
> [562240.479751] sp : ffff0000300cfa70
> [562240.674822] Call trace:
> [562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
> [562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
> [562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
> [562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
> [562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
> [562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
> [562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
> [562240.756014]  process_one_work+0x1b4/0x448
> [562240.764548]  worker_thread+0x54/0x468
> [562240.772562]  kthread+0x134/0x138
> [562240.779989]  ret_from_fork+0x10/0x18
> 
> So set a zero-address for phy->attached_sas_addr only when
> phy->attached_dev_type == NO_DEVICE.
> 
> Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
> 
> Signed-off-by: Xingui Yang <yangxingui@huawei.com>
> ---
>   drivers/scsi/libsas/sas_expander.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
> index a2204674b680..5a81754d3768 100644
> --- a/drivers/scsi/libsas/sas_expander.c
> +++ b/drivers/scsi/libsas/sas_expander.c
> @@ -239,8 +239,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
>   	/* help some expanders that fail to zero sas_address in the 'no
>   	 * device' case
>   	 */
> -	if (phy->attached_dev_type == SAS_PHY_UNUSED ||
> -	    phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
> +	if (phy->attached_dev_type == SAS_PHY_UNUSED)
>   		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
>   	else
>   		memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
>
yangxingui Oct. 28, 2023, 2:47 a.m. UTC | #2
On 2023/10/20 11:24, Jason Yan wrote:
> On 2023/10/20 10:42, Xingui Yang wrote:
>> phy->attached_sas_addr will be set to a zero-address when
>> phy->linkrate < SAS_LINK_RATE_1_5_GBPS but device-type != NO_DEVICE,
>> and it may trigger BUG() as follows when do revalidate with zero-address:
> 
> Hi  Xingui,
> 
> Why is this zero-addressed PHY added to another port? A zero-addressed 
> PHY should not belong to any port.
Hi Jason,

[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 
0000000000000000 (stp)
port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of 
another port

we get phy0's data info:
crash> struct ex_phy 0xffff8020cead3000
struct ex_phy {
   phy_id = 0,
   phy_state = PHY_EMPTY,
   attached_dev_type = SAS_END_DEVICE,
   linkrate = SAS_PHY_RESET_IN_PROGRESS,
   attached_sata_host = 0 '\000',
   attached_sata_dev = 1 '\001',
   attached_sata_ps = 0 '\000',
   attached_tproto = SAS_PROTOCOL_NONE,
   attached_iproto = SAS_PROTOCOL_NONE,
   attached_sas_addr = "\000\000\000\000\000\000\000",
   attached_phy_id = 0 '\000',
   phy_change_count = 152,
   routing_attr = TABLE_ROUTING,
   virtual = 0 '\000',
   last_da_index = -1,
   phy = 0xffff8020ceac5000,
   port = 0xffffa0300c6f8800
}

When a new device is attached, if the address is 0 and the device type 
is not null, but stp or ssp, the device still creates a port in 
sas_ex_discover_end_dev() and add all other expander phys with the same 
sas_address 0 to this port in sas_ex_get_linkrate().

All of the phys is zero-address belongs to port-7:7:0 as follows:

crash> list sas_phy.port_siblings -s sas_phy.dev.kobj.name -s 
sas_phy.identify.sas_address  -h ffff8020ceac5000
ffff8020ceac5000
   dev.kobj.name = 0xffff803017878b00 "phy-7:7:0",
   identify.sas_address = 0,
ffff8020ceacb000
   dev.kobj.name = 0xffff803017871980 "phy-7:7:1",
   identify.sas_address = 0,
ffff8020ceade000
   dev.kobj.name = 0xffff80301787f580 "phy-7:7:2",
   identify.sas_address = 0,
ffff8020cead4000
   dev.kobj.name = 0xffff80301787d980 "phy-7:7:3",
   identify.sas_address = 0,
ffff8020ceacc800
   dev.kobj.name = 0xffff80301787a480 "phy-7:7:4",
   identify.sas_address = 0,
ffff8020ceac6000
   dev.kobj.name = 0xffff803017872500 "phy-7:7:5",
   identify.sas_address = 0,
ffff8020ceacd000
   dev.kobj.name = 0xffff803041e62100 "phy-7:7:12",
   identify.sas_address = 0,
ffff8020ceadb000
   dev.kobj.name = 0xffff803041e61980 "phy-7:7:13",
   identify.sas_address = 0,
ffff8020ceac8800
   dev.kobj.name = 0xffff803041e61a00 "phy-7:7:14",
   identify.sas_address = 0,
ffff8020cead1800
   dev.kobj.name = 0xffff803041e69980 "phy-7:7:15",
   identify.sas_address = 0,


Thanks,
Xingui

> 
> Thanks,
> Jason
> 
>>
>> [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
>> [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 
>> 0000000000000000 (stp)
>> [562240.062680]  port-7:7:0: trying to add phy phy-7:7:19 fails: it's 
>> already part of another port
>> [562240.085064] ------------[ cut here ]------------
>> [562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
>> [562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
>> [562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 
>> 0x0000000003bcbebf)
>> [562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain 
>> [libsas]
>> [562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
>> [562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.479751] sp : ffff0000300cfa70
>> [562240.674822] Call trace:
>> [562240.682709]  sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
>> [562240.694013]  sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
>> [562240.704957]  sas_ex_discover_end_dev+0xfc/0x538 [libsas]
>> [562240.715508]  sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
>> [562240.725634]  sas_ex_discover_devices+0x9c/0x1a8 [libsas]
>> [562240.735855]  sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
>> [562240.746123]  sas_revalidate_domain+0x158/0x160 [libsas]
>> [562240.756014]  process_one_work+0x1b4/0x448
>> [562240.764548]  worker_thread+0x54/0x468
>> [562240.772562]  kthread+0x134/0x138
>> [562240.779989]  ret_from_fork+0x10/0x18
>>
>> So set a zero-address for phy->attached_sas_addr only when
>> phy->attached_dev_type == NO_DEVICE.
>>
>> Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device 
>> attached' conditions")
>>
>> Signed-off-by: Xingui Yang <yangxingui@huawei.com>
>> ---
>>   drivers/scsi/libsas/sas_expander.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/scsi/libsas/sas_expander.c 
>> b/drivers/scsi/libsas/sas_expander.c
>> index a2204674b680..5a81754d3768 100644
>> --- a/drivers/scsi/libsas/sas_expander.c
>> +++ b/drivers/scsi/libsas/sas_expander.c
>> @@ -239,8 +239,7 @@ static void sas_set_ex_phy(struct domain_device 
>> *dev, int phy_id,
>>       /* help some expanders that fail to zero sas_address in the 'no
>>        * device' case
>>        */
>> -    if (phy->attached_dev_type == SAS_PHY_UNUSED ||
>> -        phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
>> +    if (phy->attached_dev_type == SAS_PHY_UNUSED)
>>           memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
>>       else
>>           memcpy(phy->attached_sas_addr, dr->attached_sas_addr, 
>> SAS_ADDR_SIZE);
>>
> .
diff mbox series

Patch

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index a2204674b680..5a81754d3768 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -239,8 +239,7 @@  static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 	/* help some expanders that fail to zero sas_address in the 'no
 	 * device' case
 	 */
-	if (phy->attached_dev_type == SAS_PHY_UNUSED ||
-	    phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+	if (phy->attached_dev_type == SAS_PHY_UNUSED)
 		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 	else
 		memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);