diff mbox series

[v2,6/8] arm64: dts: qcom: sc7180: Add UFS nodes

Message ID 20231117201720.298422-7-davidwronek@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series Add UFS support for SC7180/SM7125 | expand

Commit Message

David Wronek Nov. 17, 2023, 8:08 p.m. UTC
Add the UFS, QMP PHY and ICE nodes for the Qualcomm SC7180 SoC.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 69 ++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

Comments

Konrad Dybcio Nov. 22, 2023, 8:04 p.m. UTC | #1
On 11/17/23 21:08, David Wronek wrote:
> Add the UFS, QMP PHY and ICE nodes for the Qualcomm SC7180 SoC.
> 
> Signed-off-by: David Wronek <davidwronek@gmail.com>
> ---
[...]

> +		ice: crypto@1d90000 {
> +			compatible = "qcom,sc7180-inline-crypto-engine",
> +				     "qcom,inline-crypto-engine";
> +			reg = <0x0 0x01d90000 0x0 0x8000>;
0x0 -> 0 for consistency with other nodes

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 11f353d416b4..daa9c63b85bd 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1532,6 +1532,75 @@  mmss_noc: interconnect@1740000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7180-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ice: crypto@1d90000 {
+			compatible = "qcom,sc7180-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d90000 0x0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7180-ipa";