| Message ID | 20231122053817.3401748-4-quic_gaurkash@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Hardware wrapped key support for qcom ice and ufs | expand |
On Tue, Nov 21, 2023 at 09:38:08PM -0800, Gaurav Kashyap wrote: > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary > key management hardware called Hardware Key Manager (HWKM). > This patch integrates HWKM support in ICE when it is > available. HWKM primarily provides hardware wrapped key support > where the ICE (storage) keys are not available in software and > protected in hardware. > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > --- > drivers/soc/qcom/ice.c | 133 ++++++++++++++++++++++++++++++++++++++++- > include/soc/qcom/ice.h | 1 + > 2 files changed, 133 insertions(+), 1 deletion(-) > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c > index 6f941d32fffb..adf9cab848fa 100644 > --- a/drivers/soc/qcom/ice.c > +++ b/drivers/soc/qcom/ice.c > @@ -26,6 +26,19 @@ > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > +#define QCOM_ICE_REG_CONTROL 0x0 > +/* QCOM ICE HWKM registers */ > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 > + > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > /* BIST ("built-in self-test") status flags */ > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > @@ -34,6 +47,9 @@ > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > +#define HWKM_OFFSET(reg) ((reg) + QCOM_ICE_HWKM_REG_OFFSET) > + > #define qcom_ice_writel(engine, val, reg) \ > writel((val), (engine)->base + (reg)) > > @@ -46,6 +62,9 @@ struct qcom_ice { > struct device_link *link; > > struct clk *core_clk; > + u8 hwkm_version; > + bool use_hwkm; > + bool hwkm_init_complete; > }; > > static bool qcom_ice_check_supported(struct qcom_ice *ice) > @@ -63,8 +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > return false; > } > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > + ice->hwkm_version = 2; > + else if (major == 3 && minor == 2) > + ice->hwkm_version = 1; > + else > + ice->hwkm_version = 0; > + > + if (ice->hwkm_version == 0) > + ice->use_hwkm = false; > + > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > major, minor, step); > + if (!ice->hwkm_version) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not supported"); So for a version < 3.2.0, we will dev_info() three times, one stating the version found, one stating that HWKM is not supported, and then below one saying that HWKM is not used. > + else > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = %d", > + ice->hwkm_version); And for version >= 3.2.0 we will dev_info() two times. To the vast majority of readers of the kernel log none of these info-prints are useful - it's just spam. I'd prefer that it was turned into dev_dbg(), which those who want to know (e.g. during bringup) can enable. But that's a separate change, please start by consolidating your information into a single line printed in the log. > + > + if (!ice->use_hwkm) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not used"); > > /* If fuses are blown, ICE might not work in the standard way. */ > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); > @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct qcom_ice *ice) > * fails, so we needn't do it in software too, and (c) properly testing > * storage encryption requires testing the full storage stack anyway, > * and not relying on hardware-level self-tests. > + * > + * However, we still care about if HWKM BIST failed (when supported) as > + * important functionality would fail later, so disable hwkm on failure. > */ > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > { > u32 regval; > + u32 bist_done_val; The "val" suffix indicates that this would be a "value", but it's actually a register offset. "bist_done_reg" would be better. > int err; > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > if (err) > dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n"); > > + if (ice->use_hwkm) { > + bist_done_val = (ice->hwkm_version == 1) ? > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > + if (qcom_ice_readl(ice, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > + bist_done_val) { > + dev_warn(ice->dev, "HWKM BIST error\n"); Sounds like a error to me, wouldn't dev_err() be suitable? > + ice->use_hwkm = false; > + } > + } > return err; > } > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) > +{ > + u32 val = 0; > + > + if (!ice->use_hwkm) > + return; > + > + /* > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > + * keys, and when it is in legacy mode, it only supports standard > + * (non HW wrapped) keys. > + * > + * Put ICE in standard mode, ICE defaults to legacy mode. > + * Legacy mode - ICE HWKM slave not supported. > + * Standard mode - ICE HWKM slave supported. > + * > + * Depending on the version of HWKM, it is controlled by different > + * registers in ICE. > + */ > + if (ice->hwkm_version >= 2) { > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > + val = val & 0xFFFFFFFE; > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > + } else { > + qcom_ice_writel(ice, 0x7, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + } > +} > + > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) > +{ > + if (!ice->use_hwkm) > + return; > + > + /* Disable CRC checks. This HWKM feature is not used. */ > + qcom_ice_writel(ice, 0x6, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + > + /* > + * Give register bank of the HWKM slave access to read and modify > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > + * be able to program keys into ICE. > + */ > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); This line is 86 characters long if left unwrapped. You're allowed to go over 80 characters if it makes the code more readable, so please do so for these and below. > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > + > + /* Clear HWKM response FIFO before doing anything */ > + qcom_ice_writel(ice, 0x8, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); > +} > + > int qcom_ice_enable(struct qcom_ice *ice) > { > + int err; > + > qcom_ice_low_power_mode_enable(ice); > qcom_ice_optimization_enable(ice); > > - return qcom_ice_wait_bist_status(ice); > + qcom_ice_enable_standard_mode(ice); > + > + err = qcom_ice_wait_bist_status(ice); > + if (err) > + return err; > + > + qcom_ice_hwkm_init(ice); > + > + return err; > } > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > return err; > } > > + qcom_ice_enable_standard_mode(ice); > + qcom_ice_hwkm_init(ice); > return qcom_ice_wait_bist_status(ice); > } > EXPORT_SYMBOL_GPL(qcom_ice_resume); > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int slot) > } > EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) > +{ > + return ice->use_hwkm; > +} > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > + > static struct qcom_ice *qcom_ice_create(struct device *dev, > void __iomem *base) > { > @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, > engine->core_clk = devm_clk_get_enabled(dev, NULL); > if (IS_ERR(engine->core_clk)) > return ERR_CAST(engine->core_clk); > + engine->use_hwkm = of_property_read_bool(dev->of_node, > + "qcom,ice-use-hwkm"); Under what circumstances would we, with version >= 3.2, not specify this flag? Thanks, Bjorn > > if (!qcom_ice_check_supported(engine)) > return ERR_PTR(-EOPNOTSUPP); > diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h > index 9dd835dba2a7..1f52e82e3e1c 100644 > --- a/include/soc/qcom/ice.h > +++ b/include/soc/qcom/ice.h > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > const struct blk_crypto_key *bkey, > u8 data_unit_size, int slot); > int qcom_ice_evict_key(struct qcom_ice *ice, int slot); > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > struct qcom_ice *of_qcom_ice_get(struct device *dev); > #endif /* __QCOM_ICE_H__ */ > -- > 2.25.1 > >
On 11/22/2023 11:08 AM, Gaurav Kashyap wrote: > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary > key management hardware called Hardware Key Manager (HWKM). > This patch integrates HWKM support in ICE when it is > available. HWKM primarily provides hardware wrapped key support > where the ICE (storage) keys are not available in software and > protected in hardware. > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > --- > drivers/soc/qcom/ice.c | 133 ++++++++++++++++++++++++++++++++++++++++- > include/soc/qcom/ice.h | 1 + > 2 files changed, 133 insertions(+), 1 deletion(-) > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c > index 6f941d32fffb..adf9cab848fa 100644 > --- a/drivers/soc/qcom/ice.c > +++ b/drivers/soc/qcom/ice.c > @@ -26,6 +26,19 @@ > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > +#define QCOM_ICE_REG_CONTROL 0x0 > +/* QCOM ICE HWKM registers */ > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 > + > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > /* BIST ("built-in self-test") status flags */ > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > @@ -34,6 +47,9 @@ > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > +#define HWKM_OFFSET(reg) ((reg) + QCOM_ICE_HWKM_REG_OFFSET) > + > #define qcom_ice_writel(engine, val, reg) \ > writel((val), (engine)->base + (reg)) > > @@ -46,6 +62,9 @@ struct qcom_ice { > struct device_link *link; > > struct clk *core_clk; > + u8 hwkm_version; > + bool use_hwkm; we can rely on hwkm_version alone to determine if hwkm support is available or not. if hwkm_version = 0 (default) consider hwkm is not enabled > + bool hwkm_init_complete; > }; > > static bool qcom_ice_check_supported(struct qcom_ice *ice) > @@ -63,8 +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > return false; > } > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > + ice->hwkm_version = 2; > + else if (major == 3 && minor == 2) > + ice->hwkm_version = 1; > + else > + ice->hwkm_version = 0; > + > + if (ice->hwkm_version == 0) > + ice->use_hwkm = false; > + hwkm version should pass from device-tree property instead of current complex logic. This will be helpful in support future hwkm version also. ice->hwkm_version == 0, condition can be use for determining if hwkm is enabled or not. > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > major, minor, step); > + if (!ice->hwkm_version) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not supported"); > + else > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = %d", > + ice->hwkm_version); > + > + if (!ice->use_hwkm) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not used"); > > /* If fuses are blown, ICE might not work in the standard way. */ > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); > @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct qcom_ice *ice) > * fails, so we needn't do it in software too, and (c) properly testing > * storage encryption requires testing the full storage stack anyway, > * and not relying on hardware-level self-tests. > + * > + * However, we still care about if HWKM BIST failed (when supported) as > + * important functionality would fail later, so disable hwkm on failure. > */ > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > { > u32 regval; > + u32 bist_done_val; > int err; > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > if (err) > dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n"); > > + if (ice->use_hwkm) { > + bist_done_val = (ice->hwkm_version == 1) ? > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > + if (qcom_ice_readl(ice, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > + bist_done_val) { > + dev_warn(ice->dev, "HWKM BIST error\n"); > + ice->use_hwkm = false; error is not passed to caller. if HWKM is enabled, and BIST failed, ICE init also should be considered has failure. Any reason considering it as warning only ? > + } > + } > return err; > } > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) > +{ > + u32 val = 0; > + > + if (!ice->use_hwkm) > + return; > + > + /* > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > + * keys, and when it is in legacy mode, it only supports standard > + * (non HW wrapped) keys. > + * > + * Put ICE in standard mode, ICE defaults to legacy mode. > + * Legacy mode - ICE HWKM slave not supported. > + * Standard mode - ICE HWKM slave supported. > + * > + * Depending on the version of HWKM, it is controlled by different > + * registers in ICE. > + */ > + if (ice->hwkm_version >= 2) { hwkm_version version >= 2 is not exist. This programming instruction may create problem in future. > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > + val = val & 0xFFFFFFFE; > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > + } else { > + qcom_ice_writel(ice, 0x7, void using constant value like "0x7" in code use #define with meaningful name that can indicate what operation is being performed. This comment is applicable for many places. > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + } > +} > + > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) > +{ > + if (!ice->use_hwkm) > + return; > + > + /* Disable CRC checks. This HWKM feature is not used. */ > + qcom_ice_writel(ice, 0x6, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + > + /* > + * Give register bank of the HWKM slave access to read and modify > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > + * be able to program keys into ICE. > + */ > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > + > + /* Clear HWKM response FIFO before doing anything */ > + qcom_ice_writel(ice, 0x8, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); > +} > + > int qcom_ice_enable(struct qcom_ice *ice) > { > + int err; > + > qcom_ice_low_power_mode_enable(ice); > qcom_ice_optimization_enable(ice); > > - return qcom_ice_wait_bist_status(ice); > + qcom_ice_enable_standard_mode(ice); > + > + err = qcom_ice_wait_bist_status(ice); > + if (err) > + return err; > + > + qcom_ice_hwkm_init(ice); new code added in this section is only application when hwkm is enabled. if (!ice->hwkm_version) { qcom_ice_enable_standard_mode(ice); qcom_ice_hwkm_init(ice); } > + > + return err; > } > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > return err; > } > > + qcom_ice_enable_standard_mode(ice); > + qcom_ice_hwkm_init(ice); > return qcom_ice_wait_bist_status(ice); > } > EXPORT_SYMBOL_GPL(qcom_ice_resume); > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int slot) > } > EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) > +{ > + return ice->use_hwkm; > +} > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > + > static struct qcom_ice *qcom_ice_create(struct device *dev, > void __iomem *base) > { > @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, > engine->core_clk = devm_clk_get_enabled(dev, NULL); > if (IS_ERR(engine->core_clk)) > return ERR_CAST(engine->core_clk); > + engine->use_hwkm = of_property_read_bool(dev->of_node, > + "qcom,ice-use-hwkm"); > > if (!qcom_ice_check_supported(engine)) > return ERR_PTR(-EOPNOTSUPP); > diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h > index 9dd835dba2a7..1f52e82e3e1c 100644 > --- a/include/soc/qcom/ice.h > +++ b/include/soc/qcom/ice.h > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > const struct blk_crypto_key *bkey, > u8 data_unit_size, int slot); > int qcom_ice_evict_key(struct qcom_ice *ice, int slot); > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > struct qcom_ice *of_qcom_ice_get(struct device *dev); > #endif /* __QCOM_ICE_H__ */
On 11/22/2023 11:08 AM, Gaurav Kashyap wrote: > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary > key management hardware called Hardware Key Manager (HWKM). > This patch integrates HWKM support in ICE when it is > available. HWKM primarily provides hardware wrapped key support > where the ICE (storage) keys are not available in software and > protected in hardware. > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > --- > drivers/soc/qcom/ice.c | 133 ++++++++++++++++++++++++++++++++++++++++- > include/soc/qcom/ice.h | 1 + > 2 files changed, 133 insertions(+), 1 deletion(-) > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c > index 6f941d32fffb..adf9cab848fa 100644 > --- a/drivers/soc/qcom/ice.c > +++ b/drivers/soc/qcom/ice.c > @@ -26,6 +26,19 @@ > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > +#define QCOM_ICE_REG_CONTROL 0x0 > +/* QCOM ICE HWKM registers */ > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 > + > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > /* BIST ("built-in self-test") status flags */ > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > @@ -34,6 +47,9 @@ > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > +#define HWKM_OFFSET(reg) ((reg) + QCOM_ICE_HWKM_REG_OFFSET) > + > #define qcom_ice_writel(engine, val, reg) \ > writel((val), (engine)->base + (reg)) > > @@ -46,6 +62,9 @@ struct qcom_ice { > struct device_link *link; > > struct clk *core_clk; > + u8 hwkm_version; > + bool use_hwkm; we can rely on hwkm_version alone to determine if hwkm support is available or not. if hwkm_version = 0 (default) consider hwkm is not enabled > + bool hwkm_init_complete; > }; > > static bool qcom_ice_check_supported(struct qcom_ice *ice) > @@ -63,8 +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > return false; > } > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > + ice->hwkm_version = 2; > + else if (major == 3 && minor == 2) > + ice->hwkm_version = 1; > + else > + ice->hwkm_version = 0; > + > + if (ice->hwkm_version == 0) > + ice->use_hwkm = false; > + hwkm version should pass from device-tree property instead of current complex logic. This will be helpful in support future hwkm version also. ice->hwkm_version == 0, condition can be use for determining if hwkm is enabled or not. > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > major, minor, step); > + if (!ice->hwkm_version) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not supported"); > + else > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = %d", > + ice->hwkm_version); > + > + if (!ice->use_hwkm) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not used"); > > /* If fuses are blown, ICE might not work in the standard way. */ > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); > @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct qcom_ice *ice) > * fails, so we needn't do it in software too, and (c) properly testing > * storage encryption requires testing the full storage stack anyway, > * and not relying on hardware-level self-tests. > + * > + * However, we still care about if HWKM BIST failed (when supported) as > + * important functionality would fail later, so disable hwkm on failure. > */ > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > { > u32 regval; > + u32 bist_done_val; > int err; > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > if (err) > dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n"); > > + if (ice->use_hwkm) { > + bist_done_val = (ice->hwkm_version == 1) ? > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > + if (qcom_ice_readl(ice, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > + bist_done_val) { > + dev_warn(ice->dev, "HWKM BIST error\n"); > + ice->use_hwkm = false; error is not passed to caller. if HWKM is enabled, and BIST failed, ICE init also should be considered has failure. Any reason considering it as warning only ? > + } > + } > return err; > } > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) > +{ > + u32 val = 0; > + > + if (!ice->use_hwkm) > + return; > + > + /* > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > + * keys, and when it is in legacy mode, it only supports standard > + * (non HW wrapped) keys. > + * > + * Put ICE in standard mode, ICE defaults to legacy mode. > + * Legacy mode - ICE HWKM slave not supported. > + * Standard mode - ICE HWKM slave supported. > + * > + * Depending on the version of HWKM, it is controlled by different > + * registers in ICE. > + */ > + if (ice->hwkm_version >= 2) { hwkm_version version >= 2 is not exist. This programming instruction may create problem in future. > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > + val = val & 0xFFFFFFFE; > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > + } else { > + qcom_ice_writel(ice, 0x7, void using constant value like "0x7" in code use #define with meaningful name that can indicate what operation is being performed. This comment is applicable for many places. > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + } > +} > + > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) > +{ > + if (!ice->use_hwkm) > + return; > + > + /* Disable CRC checks. This HWKM feature is not used. */ > + qcom_ice_writel(ice, 0x6, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + > + /* > + * Give register bank of the HWKM slave access to read and modify > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > + * be able to program keys into ICE. > + */ > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > + > + /* Clear HWKM response FIFO before doing anything */ > + qcom_ice_writel(ice, 0x8, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); > +} > + > int qcom_ice_enable(struct qcom_ice *ice) > { > + int err; > + > qcom_ice_low_power_mode_enable(ice); > qcom_ice_optimization_enable(ice); > > - return qcom_ice_wait_bist_status(ice); > + qcom_ice_enable_standard_mode(ice); > + > + err = qcom_ice_wait_bist_status(ice); > + if (err) > + return err; > + > + qcom_ice_hwkm_init(ice); new code added in this section is only application when hwkm is enabled. if (!ice->hwkm_version) { qcom_ice_enable_standard_mode(ice); qcom_ice_hwkm_init(ice); } > + > + return err; > } > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > return err; > } > > + qcom_ice_enable_standard_mode(ice); > + qcom_ice_hwkm_init(ice); > return qcom_ice_wait_bist_status(ice); > } > EXPORT_SYMBOL_GPL(qcom_ice_resume); > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int slot) > } > EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) > +{ > + return ice->use_hwkm; > +} > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > + > static struct qcom_ice *qcom_ice_create(struct device *dev, > void __iomem *base) > { > @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, > engine->core_clk = devm_clk_get_enabled(dev, NULL); > if (IS_ERR(engine->core_clk)) > return ERR_CAST(engine->core_clk); > + engine->use_hwkm = of_property_read_bool(dev->of_node, > + "qcom,ice-use-hwkm"); > > if (!qcom_ice_check_supported(engine)) > return ERR_PTR(-EOPNOTSUPP); > diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h > index 9dd835dba2a7..1f52e82e3e1c 100644 > --- a/include/soc/qcom/ice.h > +++ b/include/soc/qcom/ice.h > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > const struct blk_crypto_key *bkey, > u8 data_unit_size, int slot); > int qcom_ice_evict_key(struct qcom_ice *ice, int slot); > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > struct qcom_ice *of_qcom_ice_get(struct device *dev); > #endif /* __QCOM_ICE_H__ */
On 11/22/2023 11:08 AM, Gaurav Kashyap wrote: > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary > key management hardware called Hardware Key Manager (HWKM). > This patch integrates HWKM support in ICE when it is > available. HWKM primarily provides hardware wrapped key support > where the ICE (storage) keys are not available in software and > protected in hardware. > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > --- > drivers/soc/qcom/ice.c | 133 ++++++++++++++++++++++++++++++++++++++++- > include/soc/qcom/ice.h | 1 + > 2 files changed, 133 insertions(+), 1 deletion(-) > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c > index 6f941d32fffb..adf9cab848fa 100644 > --- a/drivers/soc/qcom/ice.c > +++ b/drivers/soc/qcom/ice.c > @@ -26,6 +26,19 @@ > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > +#define QCOM_ICE_REG_CONTROL 0x0 > +/* QCOM ICE HWKM registers */ > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 > + > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > /* BIST ("built-in self-test") status flags */ > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > @@ -34,6 +47,9 @@ > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > +#define HWKM_OFFSET(reg) ((reg) + QCOM_ICE_HWKM_REG_OFFSET) > + > #define qcom_ice_writel(engine, val, reg) \ > writel((val), (engine)->base + (reg)) > > @@ -46,6 +62,9 @@ struct qcom_ice { > struct device_link *link; > > struct clk *core_clk; > + u8 hwkm_version; > + bool use_hwkm; we can rely on hwkm_version alone to determine if hwkm support is available or not. if hwkm_version = 0 (default) consider hwkm is not enabled > + bool hwkm_init_complete; > }; > > static bool qcom_ice_check_supported(struct qcom_ice *ice) > @@ -63,8 +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > return false; > } > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > + ice->hwkm_version = 2; > + else if (major == 3 && minor == 2) > + ice->hwkm_version = 1; > + else > + ice->hwkm_version = 0; > + > + if (ice->hwkm_version == 0) > + ice->use_hwkm = false; > + hwkm version should pass from device-tree property instead of current complex logic. This will be helpful in support future hwkm version also. ice->hwkm_version == 0, condition can be use for determining if hwkm is enabled or not. > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > major, minor, step); > + if (!ice->hwkm_version) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not supported"); > + else > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = %d", > + ice->hwkm_version); > + > + if (!ice->use_hwkm) > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not used"); > > /* If fuses are blown, ICE might not work in the standard way. */ > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); > @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct qcom_ice *ice) > * fails, so we needn't do it in software too, and (c) properly testing > * storage encryption requires testing the full storage stack anyway, > * and not relying on hardware-level self-tests. > + * > + * However, we still care about if HWKM BIST failed (when supported) as > + * important functionality would fail later, so disable hwkm on failure. > */ > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > { > u32 regval; > + u32 bist_done_val; > int err; > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > if (err) > dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n"); > > + if (ice->use_hwkm) { > + bist_done_val = (ice->hwkm_version == 1) ? > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > + if (qcom_ice_readl(ice, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > + bist_done_val) { > + dev_warn(ice->dev, "HWKM BIST error\n"); > + ice->use_hwkm = false; error is not passed to caller. if HWKM is enabled, and BIST failed, ICE init also should be considered has failure. Any reason considering it as warning only ? > + } > + } > return err; > } > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) > +{ > + u32 val = 0; > + > + if (!ice->use_hwkm) > + return; > + > + /* > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > + * keys, and when it is in legacy mode, it only supports standard > + * (non HW wrapped) keys. > + * > + * Put ICE in standard mode, ICE defaults to legacy mode. > + * Legacy mode - ICE HWKM slave not supported. > + * Standard mode - ICE HWKM slave supported. > + * > + * Depending on the version of HWKM, it is controlled by different > + * registers in ICE. > + */ > + if (ice->hwkm_version >= 2) { This programming instruction may create problem fn future of hwkm version is not compatible. Better way is: if (ice->hwkm_version == 2 && ice->hwkm_version == 3) > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > + val = val & 0xFFFFFFFE; > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > + } else { > + qcom_ice_writel(ice, 0x7, void using constant value like "0x7" in code use #define with meaningful name that can indicate what operation is being performed. This comment is applicable for many places. > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + } > +} > + > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) > +{ > + if (!ice->use_hwkm) > + return; > + > + /* Disable CRC checks. This HWKM feature is not used. */ > + qcom_ice_writel(ice, 0x6, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > + > + /* > + * Give register bank of the HWKM slave access to read and modify > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > + * be able to program keys into ICE. > + */ > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > + qcom_ice_writel(ice, 0xFFFFFFFF, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > + > + /* Clear HWKM response FIFO before doing anything */ > + qcom_ice_writel(ice, 0x8, > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); > +} > + > int qcom_ice_enable(struct qcom_ice *ice) > { > + int err; > + > qcom_ice_low_power_mode_enable(ice); > qcom_ice_optimization_enable(ice); > > - return qcom_ice_wait_bist_status(ice); > + qcom_ice_enable_standard_mode(ice); > + > + err = qcom_ice_wait_bist_status(ice); > + if (err) > + return err; > + > + qcom_ice_hwkm_init(ice); new code added in this section is only application when hwkm is enabled. if (!ice->hwkm_version) { qcom_ice_enable_standard_mode(ice); qcom_ice_hwkm_init(ice); } > + > + return err; > } > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > return err; > } > > + qcom_ice_enable_standard_mode(ice); > + qcom_ice_hwkm_init(ice); > return qcom_ice_wait_bist_status(ice); > } > EXPORT_SYMBOL_GPL(qcom_ice_resume); > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int slot) > } > EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) > +{ > + return ice->use_hwkm; > +} > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > + > static struct qcom_ice *qcom_ice_create(struct device *dev, > void __iomem *base) > { > @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, > engine->core_clk = devm_clk_get_enabled(dev, NULL); > if (IS_ERR(engine->core_clk)) > return ERR_CAST(engine->core_clk); > + engine->use_hwkm = of_property_read_bool(dev->of_node, > + "qcom,ice-use-hwkm"); > > if (!qcom_ice_check_supported(engine)) > return ERR_PTR(-EOPNOTSUPP); > diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h > index 9dd835dba2a7..1f52e82e3e1c 100644 > --- a/include/soc/qcom/ice.h > +++ b/include/soc/qcom/ice.h > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > const struct blk_crypto_key *bkey, > u8 data_unit_size, int slot); > int qcom_ice_evict_key(struct qcom_ice *ice, int slot); > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > struct qcom_ice *of_qcom_ice_get(struct device *dev); > #endif /* __QCOM_ICE_H__ */
Hello Bjorn, On 12/07/2023, Bjorn Andersson wrote: > On Tue, Nov 21, 2023 at 09:38:08PM -0800, Gaurav Kashyap wrote: > > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary key > > management hardware called Hardware Key Manager (HWKM). > > This patch integrates HWKM support in ICE when it is available. HWKM > > primarily provides hardware wrapped key support where the ICE > > (storage) keys are not available in software and protected in > > hardware. > > > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > > --- > > drivers/soc/qcom/ice.c | 133 > ++++++++++++++++++++++++++++++++++++++++- > > include/soc/qcom/ice.h | 1 + > > 2 files changed, 133 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c index > > 6f941d32fffb..adf9cab848fa 100644 > > --- a/drivers/soc/qcom/ice.c > > +++ b/drivers/soc/qcom/ice.c > > @@ -26,6 +26,19 @@ > > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > > +#define QCOM_ICE_REG_CONTROL 0x0 > > +/* QCOM ICE HWKM registers */ > > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 > > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 > > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 > > + > > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > > > /* BIST ("built-in self-test") status flags */ > > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > > @@ -34,6 +47,9 @@ > > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 #define > > QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > > +#define HWKM_OFFSET(reg) ((reg) + > QCOM_ICE_HWKM_REG_OFFSET) > > + > > #define qcom_ice_writel(engine, val, reg) \ > > writel((val), (engine)->base + (reg)) > > > > @@ -46,6 +62,9 @@ struct qcom_ice { > > struct device_link *link; > > > > struct clk *core_clk; > > + u8 hwkm_version; > > + bool use_hwkm; > > + bool hwkm_init_complete; > > }; > > > > static bool qcom_ice_check_supported(struct qcom_ice *ice) @@ -63,8 > > +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > > return false; > > } > > > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > > + ice->hwkm_version = 2; > > + else if (major == 3 && minor == 2) > > + ice->hwkm_version = 1; > > + else > > + ice->hwkm_version = 0; > > + > > + if (ice->hwkm_version == 0) > > + ice->use_hwkm = false; > > + > > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > > major, minor, step); > > + if (!ice->hwkm_version) > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not > > + supported"); > > So for a version < 3.2.0, we will dev_info() three times, one stating the > version found, one stating that HWKM is not supported, and then below one > saying that HWKM is not used. > > > + else > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = > %d", > > + ice->hwkm_version); > > And for version >= 3.2.0 we will dev_info() two times. > > > To the vast majority of readers of the kernel log none of these info-prints are > useful - it's just spam. > > I'd prefer that it was turned into dev_dbg(), which those who want to know > (e.g. during bringup) can enable. But that's a separate change, please start by > consolidating your information into a single line printed in the log. Noted for next patch. > > > + > > + if (!ice->use_hwkm) > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not > > + used"); > > > > /* If fuses are blown, ICE might not work in the standard way. */ > > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); @@ > > -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct > qcom_ice *ice) > > * fails, so we needn't do it in software too, and (c) properly testing > > * storage encryption requires testing the full storage stack anyway, > > * and not relying on hardware-level self-tests. > > + * > > + * However, we still care about if HWKM BIST failed (when supported) > > + as > > + * important functionality would fail later, so disable hwkm on failure. > > */ > > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) { > > u32 regval; > > + u32 bist_done_val; > > The "val" suffix indicates that this would be a "value", but it's actually a > register offset. "bist_done_reg" would be better. > Noted for next patch. > > int err; > > > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct > qcom_ice *ice) > > if (err) > > dev_err(ice->dev, "Timed out waiting for ICE self-test > > to complete\n"); > > > > + if (ice->use_hwkm) { > > + bist_done_val = (ice->hwkm_version == 1) ? > > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > > + if (qcom_ice_readl(ice, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > > + bist_done_val) { > > + dev_warn(ice->dev, "HWKM BIST error\n"); > > Sounds like a error to me, wouldn't dev_err() be suitable? > Yes, noted for next patch. > > + ice->use_hwkm = false; > > + } > > + } > > return err; > > } > > > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) { > > + u32 val = 0; > > + > > + if (!ice->use_hwkm) > > + return; > > + > > + /* > > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > > + * keys, and when it is in legacy mode, it only supports standard > > + * (non HW wrapped) keys. > > + * > > + * Put ICE in standard mode, ICE defaults to legacy mode. > > + * Legacy mode - ICE HWKM slave not supported. > > + * Standard mode - ICE HWKM slave supported. > > + * > > + * Depending on the version of HWKM, it is controlled by different > > + * registers in ICE. > > + */ > > + if (ice->hwkm_version >= 2) { > > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > > + val = val & 0xFFFFFFFE; > > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > > + } else { > > + qcom_ice_writel(ice, 0x7, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > > + } > > +} > > + > > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) { > > + if (!ice->use_hwkm) > > + return; > > + > > + /* Disable CRC checks. This HWKM feature is not used. */ > > + qcom_ice_writel(ice, 0x6, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > > + > > + /* > > + * Give register bank of the HWKM slave access to read and modify > > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > > + * be able to program keys into ICE. > > + */ > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); > > This line is 86 characters long if left unwrapped. You're allowed to go over 80 > characters if it makes the code more readable, so please do so for these and > below. > Noted for next patch. > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > > + > > + /* Clear HWKM response FIFO before doing anything */ > > + qcom_ice_writel(ice, 0x8, > > + > > > +HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); > > +} > > + > > int qcom_ice_enable(struct qcom_ice *ice) { > > + int err; > > + > > qcom_ice_low_power_mode_enable(ice); > > qcom_ice_optimization_enable(ice); > > > > - return qcom_ice_wait_bist_status(ice); > > + qcom_ice_enable_standard_mode(ice); > > + > > + err = qcom_ice_wait_bist_status(ice); > > + if (err) > > + return err; > > + > > + qcom_ice_hwkm_init(ice); > > + > > + return err; > > } > > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > > return err; > > } > > > > + qcom_ice_enable_standard_mode(ice); > > + qcom_ice_hwkm_init(ice); > > return qcom_ice_wait_bist_status(ice); } > > EXPORT_SYMBOL_GPL(qcom_ice_resume); > > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int > > slot) } EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) { > > + return ice->use_hwkm; > > +} > > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > > + > > static struct qcom_ice *qcom_ice_create(struct device *dev, > > void __iomem *base) { @@ -239,6 > > +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, > > engine->core_clk = devm_clk_get_enabled(dev, NULL); > > if (IS_ERR(engine->core_clk)) > > return ERR_CAST(engine->core_clk); > > + engine->use_hwkm = of_property_read_bool(dev->of_node, > > + "qcom,ice-use-hwkm"); > > Under what circumstances would we, with version >= 3.2, not specify this > flag? > > Thanks, > Bjorn > For 3.2.0 versions and above where all the Trustzone support is not present for wrapped keys, using Qualcomm ICE means using standard (non-wrapped) keys. This cannot work in conjunction with "HWKM mode" being enabled, and ICE needs to be in "Legacy Mode". HWKM mode is basically a bunch of register initializations. Ideally, there should not be any SoC supporting HWKM which does not have all the support, with a pure hardware version based decision. But unfortunately, we need an explicit switch to support the above scenario. > > > > if (!qcom_ice_check_supported(engine)) > > return ERR_PTR(-EOPNOTSUPP); diff --git > > a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h index > > 9dd835dba2a7..1f52e82e3e1c 100644 > > --- a/include/soc/qcom/ice.h > > +++ b/include/soc/qcom/ice.h > > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > > const struct blk_crypto_key *bkey, > > u8 data_unit_size, int slot); int > > qcom_ice_evict_key(struct qcom_ice *ice, int slot); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > > struct qcom_ice *of_qcom_ice_get(struct device *dev); #endif /* > > __QCOM_ICE_H__ */ > > -- > > 2.25.1 > > > >
Hello Om On 12/07/2023, Om Prakash Singh wrote: > On 11/22/2023 11:08 AM, Gaurav Kashyap wrote: > > Qualcomm's ICE (Inline Crypto Engine) contains a proprietary key > > management hardware called Hardware Key Manager (HWKM). > > This patch integrates HWKM support in ICE when it is available. HWKM > > primarily provides hardware wrapped key support where the ICE > > (storage) keys are not available in software and protected in > > hardware. > > > > Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> > > --- > > drivers/soc/qcom/ice.c | 133 > ++++++++++++++++++++++++++++++++++++++++- > > include/soc/qcom/ice.h | 1 + > > 2 files changed, 133 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c index > > 6f941d32fffb..adf9cab848fa 100644 > > --- a/drivers/soc/qcom/ice.c > > +++ b/drivers/soc/qcom/ice.c > > @@ -26,6 +26,19 @@ > > #define QCOM_ICE_REG_FUSE_SETTING 0x0010 > > #define QCOM_ICE_REG_BIST_STATUS 0x0070 > > #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > > +#define QCOM_ICE_REG_CONTROL 0x0 > > +/* QCOM ICE HWKM registers */ > > +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL > 0x1000 > > +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS > 0x1004 > > +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS > 0x2008 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 > 0x5000 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 > 0x5004 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 > 0x5008 > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 > 0x500C > > +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 > 0x5010 > > + > > +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 > > +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 > > > > /* BIST ("built-in self-test") status flags */ > > #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) > > @@ -34,6 +47,9 @@ > > #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > > #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > > > > +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 > > +#define HWKM_OFFSET(reg) ((reg) + > QCOM_ICE_HWKM_REG_OFFSET) > > + > > #define qcom_ice_writel(engine, val, reg) \ > > writel((val), (engine)->base + (reg)) > > > > @@ -46,6 +62,9 @@ struct qcom_ice { > > struct device_link *link; > > > > struct clk *core_clk; > > + u8 hwkm_version; > > + bool use_hwkm; > > we can rely on hwkm_version alone to determine if hwkm support is > available or not. > if hwkm_version = 0 (default) consider hwkm is not enabled > The reason this is being added is to support standard keys on chipsets which contain a HWKM version, but does not have the capability in Trustzone (for example) to completely use wrapped keys. Using a HWKM DTSI entry will let you explicitly enable/disable wrapped key (or hwkm) support. In general too, I think it is good to allow support for both standard and wrapped keys. > > + bool hwkm_init_complete; > > }; > > > > static bool qcom_ice_check_supported(struct qcom_ice *ice) @@ -63,8 > > +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) > > return false; > > } > > > > + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) > > + ice->hwkm_version = 2; > > + else if (major == 3 && minor == 2) > > + ice->hwkm_version = 1; > > + else > > + ice->hwkm_version = 0; > > + > > + if (ice->hwkm_version == 0) > > + ice->use_hwkm = false; > > + > hwkm version should pass from device-tree property instead of current > complex logic. This will be helpful in support future hwkm version also. > ice->hwkm_version == 0, condition can be use for determining if hwkm is > enabled or not. > Shouldn't the hardware version be read from the hardware? > > dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > > major, minor, step); > > + if (!ice->hwkm_version) > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not > supported"); > > + else > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) > version = %d", > > + ice->hwkm_version); > > + > > + if (!ice->use_hwkm) > > + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not > used"); > > > > /* If fuses are blown, ICE might not work in the standard way. */ > > regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); > > @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct > qcom_ice *ice) > > * fails, so we needn't do it in software too, and (c) properly testing > > * storage encryption requires testing the full storage stack anyway, > > * and not relying on hardware-level self-tests. > > + * > > + * However, we still care about if HWKM BIST failed (when supported) as > > + * important functionality would fail later, so disable hwkm on failure. > > */ > > static int qcom_ice_wait_bist_status(struct qcom_ice *ice) > > { > > u32 regval; > > + u32 bist_done_val; > > int err; > > > > err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, > > @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct > qcom_ice *ice) > > if (err) > > dev_err(ice->dev, "Timed out waiting for ICE self-test to > complete\n"); > > > > + if (ice->use_hwkm) { > > + bist_done_val = (ice->hwkm_version == 1) ? > > + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : > > + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; > > + if (qcom_ice_readl(ice, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != > > + bist_done_val) { > > + dev_warn(ice->dev, "HWKM BIST error\n"); > > + ice->use_hwkm = false; > error is not passed to caller. if HWKM is enabled, and BIST failed, ICE > init also should be considered has failure. > > Any reason considering it as warning only ? Noted for the next patch. > > + } > > + } > > return err; > > } > > > > +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) > > +{ > > + u32 val = 0; > > + > > + if (!ice->use_hwkm) > > + return; > > + > > + /* > > + * When ICE is in standard (hwkm) mode, it supports HW wrapped > > + * keys, and when it is in legacy mode, it only supports standard > > + * (non HW wrapped) keys. > > + * > > + * Put ICE in standard mode, ICE defaults to legacy mode. > > + * Legacy mode - ICE HWKM slave not supported. > > + * Standard mode - ICE HWKM slave supported. > > + * > > + * Depending on the version of HWKM, it is controlled by different > > + * registers in ICE. > > + */ > > + if (ice->hwkm_version >= 2) { > > hwkm_version version >= 2 is not exist. This programming instruction may > create problem in future. > We currently use HWKM version 2 on SM8650. If you are specifying only versions greater than 2, At best, we won't need any changes to support let's say a version 3 At worst, changes need to be made to support version specific changes, which we would have had to make anyway. > > + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); > > + val = val & 0xFFFFFFFE; > > + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); > > + } else { > > + qcom_ice_writel(ice, 0x7, > void using constant value like "0x7" in code use #define with meaningful > name that can indicate what operation is being performed. > This comment is applicable for many places. I agree, noted for the next patch. > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > > + } > > +} > > + > > +static void qcom_ice_hwkm_init(struct qcom_ice *ice) > > +{ > > + if (!ice->use_hwkm) > > + return; > > + > > + /* Disable CRC checks. This HWKM feature is not used. */ > > + qcom_ice_writel(ice, 0x6, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); > > + > > + /* > > + * Give register bank of the HWKM slave access to read and modify > > + * the keyslots in ICE HWKM slave. Without this, trustzone will not > > + * be able to program keys into ICE. > > + */ > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); > > + qcom_ice_writel(ice, 0xFFFFFFFF, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); > > + > > + /* Clear HWKM response FIFO before doing anything */ > > + qcom_ice_writel(ice, 0x8, > > + > HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STA > TUS)); > > +} > > + > > int qcom_ice_enable(struct qcom_ice *ice) > > { > > + int err; > > + > > qcom_ice_low_power_mode_enable(ice); > > qcom_ice_optimization_enable(ice); > > > > - return qcom_ice_wait_bist_status(ice); > > + qcom_ice_enable_standard_mode(ice); > > + > > + err = qcom_ice_wait_bist_status(ice); > > + if (err) > > + return err; > > + > > + qcom_ice_hwkm_init(ice); > new code added in this section is only application when hwkm is enabled. > if (!ice->hwkm_version) { > qcom_ice_enable_standard_mode(ice); > qcom_ice_hwkm_init(ice); > } It is already gated within the new APIs > > + > > + return err; > > } > > EXPORT_SYMBOL_GPL(qcom_ice_enable); > > > > @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) > > return err; > > } > > > > + qcom_ice_enable_standard_mode(ice); > > + qcom_ice_hwkm_init(ice); > > return qcom_ice_wait_bist_status(ice); > > } > > EXPORT_SYMBOL_GPL(qcom_ice_resume); > > @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int > slot) > > } > > EXPORT_SYMBOL_GPL(qcom_ice_evict_key); > > > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) > > +{ > > + return ice->use_hwkm; > > +} > > +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); > > + > > static struct qcom_ice *qcom_ice_create(struct device *dev, > > void __iomem *base) > > { > > @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct > device *dev, > > engine->core_clk = devm_clk_get_enabled(dev, NULL); > > if (IS_ERR(engine->core_clk)) > > return ERR_CAST(engine->core_clk); > > + engine->use_hwkm = of_property_read_bool(dev->of_node, > > + "qcom,ice-use-hwkm"); > > > > if (!qcom_ice_check_supported(engine)) > > return ERR_PTR(-EOPNOTSUPP); > > diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h > > index 9dd835dba2a7..1f52e82e3e1c 100644 > > --- a/include/soc/qcom/ice.h > > +++ b/include/soc/qcom/ice.h > > @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, > > const struct blk_crypto_key *bkey, > > u8 data_unit_size, int slot); > > int qcom_ice_evict_key(struct qcom_ice *ice, int slot); > > +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); > > struct qcom_ice *of_qcom_ice_get(struct device *dev); > > #endif /* __QCOM_ICE_H__ */
diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c index 6f941d32fffb..adf9cab848fa 100644 --- a/drivers/soc/qcom/ice.c +++ b/drivers/soc/qcom/ice.c @@ -26,6 +26,19 @@ #define QCOM_ICE_REG_FUSE_SETTING 0x0010 #define QCOM_ICE_REG_BIST_STATUS 0x0070 #define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 +#define QCOM_ICE_REG_CONTROL 0x0 +/* QCOM ICE HWKM registers */ +#define QCOM_ICE_REG_HWKM_TZ_KM_CTL 0x1000 +#define QCOM_ICE_REG_HWKM_TZ_KM_STATUS 0x1004 +#define QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS 0x2008 +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_0 0x5000 +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_1 0x5004 +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_2 0x5008 +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_3 0x500C +#define QCOM_ICE_REG_HWKM_BANK0_BBAC_4 0x5010 + +#define QCOM_ICE_HWKM_BIST_DONE_V1_VAL 0x11 +#define QCOM_ICE_HWKM_BIST_DONE_V2_VAL 0x287 /* BIST ("built-in self-test") status flags */ #define QCOM_ICE_BIST_STATUS_MASK GENMASK(31, 28) @@ -34,6 +47,9 @@ #define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 #define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 +#define QCOM_ICE_HWKM_REG_OFFSET 0x8000 +#define HWKM_OFFSET(reg) ((reg) + QCOM_ICE_HWKM_REG_OFFSET) + #define qcom_ice_writel(engine, val, reg) \ writel((val), (engine)->base + (reg)) @@ -46,6 +62,9 @@ struct qcom_ice { struct device_link *link; struct clk *core_clk; + u8 hwkm_version; + bool use_hwkm; + bool hwkm_init_complete; }; static bool qcom_ice_check_supported(struct qcom_ice *ice) @@ -63,8 +82,26 @@ static bool qcom_ice_check_supported(struct qcom_ice *ice) return false; } + if (major >= 4 || (major == 3 && minor == 2 && step >= 1)) + ice->hwkm_version = 2; + else if (major == 3 && minor == 2) + ice->hwkm_version = 1; + else + ice->hwkm_version = 0; + + if (ice->hwkm_version == 0) + ice->use_hwkm = false; + dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", major, minor, step); + if (!ice->hwkm_version) + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not supported"); + else + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) version = %d", + ice->hwkm_version); + + if (!ice->use_hwkm) + dev_info(dev, "QC ICE HWKM (Hardware Key Manager) not used"); /* If fuses are blown, ICE might not work in the standard way. */ regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING); @@ -113,10 +150,14 @@ static void qcom_ice_optimization_enable(struct qcom_ice *ice) * fails, so we needn't do it in software too, and (c) properly testing * storage encryption requires testing the full storage stack anyway, * and not relying on hardware-level self-tests. + * + * However, we still care about if HWKM BIST failed (when supported) as + * important functionality would fail later, so disable hwkm on failure. */ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) { u32 regval; + u32 bist_done_val; int err; err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS, @@ -125,15 +166,95 @@ static int qcom_ice_wait_bist_status(struct qcom_ice *ice) if (err) dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n"); + if (ice->use_hwkm) { + bist_done_val = (ice->hwkm_version == 1) ? + QCOM_ICE_HWKM_BIST_DONE_V1_VAL : + QCOM_ICE_HWKM_BIST_DONE_V2_VAL; + if (qcom_ice_readl(ice, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_STATUS)) != + bist_done_val) { + dev_warn(ice->dev, "HWKM BIST error\n"); + ice->use_hwkm = false; + } + } return err; } +static void qcom_ice_enable_standard_mode(struct qcom_ice *ice) +{ + u32 val = 0; + + if (!ice->use_hwkm) + return; + + /* + * When ICE is in standard (hwkm) mode, it supports HW wrapped + * keys, and when it is in legacy mode, it only supports standard + * (non HW wrapped) keys. + * + * Put ICE in standard mode, ICE defaults to legacy mode. + * Legacy mode - ICE HWKM slave not supported. + * Standard mode - ICE HWKM slave supported. + * + * Depending on the version of HWKM, it is controlled by different + * registers in ICE. + */ + if (ice->hwkm_version >= 2) { + val = qcom_ice_readl(ice, QCOM_ICE_REG_CONTROL); + val = val & 0xFFFFFFFE; + qcom_ice_writel(ice, val, QCOM_ICE_REG_CONTROL); + } else { + qcom_ice_writel(ice, 0x7, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); + } +} + +static void qcom_ice_hwkm_init(struct qcom_ice *ice) +{ + if (!ice->use_hwkm) + return; + + /* Disable CRC checks. This HWKM feature is not used. */ + qcom_ice_writel(ice, 0x6, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_TZ_KM_CTL)); + + /* + * Give register bank of the HWKM slave access to read and modify + * the keyslots in ICE HWKM slave. Without this, trustzone will not + * be able to program keys into ICE. + */ + qcom_ice_writel(ice, 0xFFFFFFFF, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_0)); + qcom_ice_writel(ice, 0xFFFFFFFF, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_1)); + qcom_ice_writel(ice, 0xFFFFFFFF, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_2)); + qcom_ice_writel(ice, 0xFFFFFFFF, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_3)); + qcom_ice_writel(ice, 0xFFFFFFFF, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BBAC_4)); + + /* Clear HWKM response FIFO before doing anything */ + qcom_ice_writel(ice, 0x8, + HWKM_OFFSET(QCOM_ICE_REG_HWKM_BANK0_BANKN_IRQ_STATUS)); +} + int qcom_ice_enable(struct qcom_ice *ice) { + int err; + qcom_ice_low_power_mode_enable(ice); qcom_ice_optimization_enable(ice); - return qcom_ice_wait_bist_status(ice); + qcom_ice_enable_standard_mode(ice); + + err = qcom_ice_wait_bist_status(ice); + if (err) + return err; + + qcom_ice_hwkm_init(ice); + + return err; } EXPORT_SYMBOL_GPL(qcom_ice_enable); @@ -149,6 +270,8 @@ int qcom_ice_resume(struct qcom_ice *ice) return err; } + qcom_ice_enable_standard_mode(ice); + qcom_ice_hwkm_init(ice); return qcom_ice_wait_bist_status(ice); } EXPORT_SYMBOL_GPL(qcom_ice_resume); @@ -205,6 +328,12 @@ int qcom_ice_evict_key(struct qcom_ice *ice, int slot) } EXPORT_SYMBOL_GPL(qcom_ice_evict_key); +bool qcom_ice_hwkm_supported(struct qcom_ice *ice) +{ + return ice->use_hwkm; +} +EXPORT_SYMBOL_GPL(qcom_ice_hwkm_supported); + static struct qcom_ice *qcom_ice_create(struct device *dev, void __iomem *base) { @@ -239,6 +368,8 @@ static struct qcom_ice *qcom_ice_create(struct device *dev, engine->core_clk = devm_clk_get_enabled(dev, NULL); if (IS_ERR(engine->core_clk)) return ERR_CAST(engine->core_clk); + engine->use_hwkm = of_property_read_bool(dev->of_node, + "qcom,ice-use-hwkm"); if (!qcom_ice_check_supported(engine)) return ERR_PTR(-EOPNOTSUPP); diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h index 9dd835dba2a7..1f52e82e3e1c 100644 --- a/include/soc/qcom/ice.h +++ b/include/soc/qcom/ice.h @@ -34,5 +34,6 @@ int qcom_ice_program_key(struct qcom_ice *ice, const struct blk_crypto_key *bkey, u8 data_unit_size, int slot); int qcom_ice_evict_key(struct qcom_ice *ice, int slot); +bool qcom_ice_hwkm_supported(struct qcom_ice *ice); struct qcom_ice *of_qcom_ice_get(struct device *dev); #endif /* __QCOM_ICE_H__ */
Qualcomm's ICE (Inline Crypto Engine) contains a proprietary key management hardware called Hardware Key Manager (HWKM). This patch integrates HWKM support in ICE when it is available. HWKM primarily provides hardware wrapped key support where the ICE (storage) keys are not available in software and protected in hardware. Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com> --- drivers/soc/qcom/ice.c | 133 ++++++++++++++++++++++++++++++++++++++++- include/soc/qcom/ice.h | 1 + 2 files changed, 133 insertions(+), 1 deletion(-)