diff mbox series

[08/13] scsi: ufs: qcom: Check the return value of ufs_qcom_power_up_sequence()

Message ID 20231201151417.65500-9-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series scsi: ufs: qcom: Minor code cleanups | expand

Commit Message

Manivannan Sadhasivam Dec. 1, 2023, 3:14 p.m. UTC
If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable
the lane clocks and continue ufshcd_hba_enable(). So let's check the return
value of ufs_qcom_power_up_sequence().

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/ufs/host/ufs-qcom.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Andrew Halaney Dec. 6, 2023, 6:43 p.m. UTC | #1
On Fri, Dec 01, 2023 at 08:44:12PM +0530, Manivannan Sadhasivam wrote:
> If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable
> the lane clocks and continue ufshcd_hba_enable(). So let's check the return
> value of ufs_qcom_power_up_sequence().
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>

> ---
>  drivers/ufs/host/ufs-qcom.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 4948dd732aae..e4dd3777a4d4 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -415,7 +415,10 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>  
>  	switch (status) {
>  	case PRE_CHANGE:
> -		ufs_qcom_power_up_sequence(hba);
> +		err = ufs_qcom_power_up_sequence(hba);
> +		if (err)
> +			return err;
> +
>  		/*
>  		 * The PHY PLL output is the source of tx/rx lane symbol
>  		 * clocks, hence, enable the lane clocks only after PHY
> -- 
> 2.25.1
> 
>
Nitin Rawat Dec. 7, 2023, 8:27 a.m. UTC | #2
On 12/1/2023 8:44 PM, Manivannan Sadhasivam wrote:
> If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable
> the lane clocks and continue ufshcd_hba_enable(). So let's check the return
> value of ufs_qcom_power_up_sequence().
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   drivers/ufs/host/ufs-qcom.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 4948dd732aae..e4dd3777a4d4 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -415,7 +415,10 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>   
>   	switch (status) {
>   	case PRE_CHANGE:
> -		ufs_qcom_power_up_sequence(hba);
> +		err = ufs_qcom_power_up_sequence(hba);
> +		if (err)
> +			return err;
> +
>   		/*
>   		 * The PHY PLL output is the source of tx/rx lane symbol
>   		 * clocks, hence, enable the lane clocks only after PHY


Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 4948dd732aae..e4dd3777a4d4 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -415,7 +415,10 @@  static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
 
 	switch (status) {
 	case PRE_CHANGE:
-		ufs_qcom_power_up_sequence(hba);
+		err = ufs_qcom_power_up_sequence(hba);
+		if (err)
+			return err;
+
 		/*
 		 * The PHY PLL output is the source of tx/rx lane symbol
 		 * clocks, hence, enable the lane clocks only after PHY