diff mbox series

[RFC,v3,02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US

Message ID 20231221-ufs-reset-ensure-effect-before-delay-v3-2-2195a1b66d2e@redhat.com (mailing list archive)
State Changes Requested
Headers show
Series scsi: ufs: Remove overzealous memory barriers | expand

Commit Message

Andrew Halaney Dec. 21, 2023, 7:09 p.m. UTC
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.

mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
 drivers/ufs/host/ufs-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Can Guo Dec. 22, 2023, 8:18 a.m. UTC | #1
On 12/22/2023 3:09 AM, Andrew Halaney wrote:
> Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
> that write has gone through to the device.
> 
> mb() ensure that the write completes, but completion doesn't mean that
> it isn't stored in a buffer somewhere. The recommendation for
> ensuring this bit has taken effect on the device is to perform a read
> back to force it to make it all the way to the device. This is
> documented in device-io.rst and a talk by Will Deacon on this can
> be seen over here:
> 
>      https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
> 
> Let's do that to ensure the bit hits the device. Because the mb()'s
> purpose wasn't to add extra ordering (on top of the ordering guaranteed
> by writel()/readl()), it can safely be removed.
> 
> Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
>   drivers/ufs/host/ufs-qcom.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 480787048e75..4c15c8a1d058 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -501,7 +501,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>   		 * make sure above write gets applied before we return from
>   		 * this function.
>   		 */
> -		mb();
> +		ufshcd_readl(hba, REG_UFS_SYS1CLK_1US);
>   	}
>   
>   	return 0;
> 
Reviewed-by: Can Guo <quic_cang@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 480787048e75..4c15c8a1d058 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -501,7 +501,7 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 		 * make sure above write gets applied before we return from
 		 * this function.
 		 */
-		mb();
+		ufshcd_readl(hba, REG_UFS_SYS1CLK_1US);
 	}
 
 	return 0;