diff mbox series

[06/11] qla2xxx: Fix command flush on cable pull

Message ID 20240223074514.8472-7-njavali@marvell.com (mailing list archive)
State Superseded
Headers show
Series qla2xxx misc. bug fixes | expand

Commit Message

Nilesh Javali Feb. 23, 2024, 7:45 a.m. UTC
From: Quinn Tran <qutran@marvell.com>

System crash due to command failed to flush back
to scsi layer.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-372.9.1.el8.x86_64 #1
 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
 RIP: 0010:__wake_up_common+0x4c/0x190
 Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75
 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  __wake_up_common_lock+0x7c/0xc0
  qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
 qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0
 ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.
  ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1
 ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
 qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0
  ? __switch_to+0x10c/0x450
 ? process_one_work+0x1a7/0x360
 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.
  ? worker_thread+0x1ce/0x390
  ? create_worker+0x1a0/0x1a0
 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70
  ? kthread+0x10a/0x120
 qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8
  ? set_kthread_struct+0x40/0x40
 qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.
  ? ret_from_fork+0x1f/0x40
 qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout

The system was under memory stress where driver was not
able to allocate a srb to carry out error recovery of cable pull.
The failure to flush cause upper layer to start modifying scsi_cmnd.
When the system free up some memory, the subsequent cable
pull trigger another command flush. At this point the
driver access a null pointer when attempting to dma unmap
the SGL.

Add a check to make sure commands are flush back on session tear
down to prevent the null pointer access.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
---
 drivers/scsi/qla2xxx/qla_target.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 2ef2dbac0db2..d7551b1443e4 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1062,6 +1062,16 @@  void qlt_free_session_done(struct work_struct *work)
 		    "%s: sess %p logout completed\n", __func__, sess);
 	}
 
+	/* check for any straggling io left behind */
+	if (!(sess->flags & FCF_FCP2_DEVICE) &&
+	    qla2x00_eh_wait_for_pending_commands(sess->vha, sess->d_id.b24, 0, WAIT_TARGET)) {
+		ql_log(ql_log_warn, vha, 0x3027,
+		    "IO not return. Resetting.\n");
+		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		qla2xxx_wake_dpc(vha);
+		qla2x00_wait_for_chip_reset(vha);
+	}
+
 	if (sess->logo_ack_needed) {
 		sess->logo_ack_needed = 0;
 		qla24xx_async_notify_ack(vha, sess,