diff mbox series

[03/28] PCI: documentation: Use PCI_IRQ_INTX

Message ID 20240325070944.3600338-4-dlemoal@kernel.org (mailing list archive)
State Not Applicable
Headers show
Series Remove PCI_IRQ_LEGACY | expand

Commit Message

Damien Le Moal March 25, 2024, 7:09 a.m. UTC
Change all references to PCI_IRQ_LEGACY to PCI_IRQ_INTX in the PCI
documentation to reflect that PCI_IRQ_LEGACY is deprecated.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 Documentation/PCI/msi-howto.rst                    | 2 +-
 Documentation/PCI/pci.rst                          | 2 +-
 Documentation/translations/zh_CN/PCI/msi-howto.rst | 2 +-
 Documentation/translations/zh_CN/PCI/pci.rst       | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index 783d30b7bb42..0692c9aec66f 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -103,7 +103,7 @@  min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
 The flags argument is used to specify which type of interrupt can be used
-by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+by the device and the driver (PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX).
 A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
 any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
 pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index cced568d78e9..dd7b1c0c21da 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -335,7 +335,7 @@  causes the PCI support to program CPU vector data into the PCI device
 capability registers. Many architectures, chip-sets, or BIOSes do NOT
 support MSI or MSI-X and a call to pci_alloc_irq_vectors with just
 the PCI_IRQ_MSI and PCI_IRQ_MSIX flags will fail, so try to always
-specify PCI_IRQ_LEGACY as well.
+specify PCI_IRQ_INTX as well.
 
 Drivers that have different interrupt handlers for MSI/MSI-X and
 legacy INTx should chose the right one based on the msi_enabled
diff --git a/Documentation/translations/zh_CN/PCI/msi-howto.rst b/Documentation/translations/zh_CN/PCI/msi-howto.rst
index 1b9b5ea790d8..95baadf767e4 100644
--- a/Documentation/translations/zh_CN/PCI/msi-howto.rst
+++ b/Documentation/translations/zh_CN/PCI/msi-howto.rst
@@ -88,7 +88,7 @@  MSI功能。
 如果设备对最小数量的向量有要求,驱动程序可以传递一个min_vecs参数,设置为这个限制,
 如果PCI核不能满足最小数量的向量,将返回-ENOSPC。
 
-flags参数用来指定设备和驱动程序可以使用哪种类型的中断(PCI_IRQ_LEGACY, PCI_IRQ_MSI,
+flags参数用来指定设备和驱动程序可以使用哪种类型的中断(PCI_IRQ_INTX, PCI_IRQ_MSI,
 PCI_IRQ_MSIX)。一个方便的短语(PCI_IRQ_ALL_TYPES)也可以用来要求任何可能的中断类型。
 如果PCI_IRQ_AFFINITY标志被设置,pci_alloc_irq_vectors()将把中断分散到可用的CPU上。
 
diff --git a/Documentation/translations/zh_CN/PCI/pci.rst b/Documentation/translations/zh_CN/PCI/pci.rst
index 83c2a41d38d3..347f5c3f5ce9 100644
--- a/Documentation/translations/zh_CN/PCI/pci.rst
+++ b/Documentation/translations/zh_CN/PCI/pci.rst
@@ -304,7 +304,7 @@  MSI-X可以分配几个单独的向量。
 的PCI_IRQ_MSI和/或PCI_IRQ_MSIX标志来启用MSI功能。这将导致PCI支持将CPU向量数
 据编程到PCI设备功能寄存器中。许多架构、芯片组或BIOS不支持MSI或MSI-X,调用
 ``pci_alloc_irq_vectors`` 时只使用PCI_IRQ_MSI和PCI_IRQ_MSIX标志会失败,
-所以尽量也要指定 ``PCI_IRQ_LEGACY`` 。
+所以尽量也要指定 ``PCI_IRQ_INTX`` 。
 
 对MSI/MSI-X和传统INTx有不同中断处理程序的驱动程序应该在调用
 ``pci_alloc_irq_vectors`` 后根据 ``pci_dev``结构体中的 ``msi_enabled``