diff mbox series

[5/8] lpfc: Handle mailbox timeouts in lpfc_get_sfp_info

Message ID 20240628172011.25921-6-justintee8345@gmail.com (mailing list archive)
State New
Headers show
Series Update lpfc to revision 14.4.0.3 | expand

Commit Message

Justin Tee June 28, 2024, 5:20 p.m. UTC
The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and
the routine unconditionally frees submitted mailbox commands regardless of
return status.  The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.

Fix by adding checks for the MBX_TIMEOUT return code.  During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout.  If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.

Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b27ebb574bfb..929cbfc95163 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7302,13 +7302,13 @@  int lpfc_get_sfp_info_wait(struct lpfc_hba *phba,
 		mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys);
 	}
 	mbox->vport = phba->pport;
-
-	rc = lpfc_sli_issue_mbox_wait(phba, mbox, 30);
+	rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_SLI4_CONFIG_TMO);
 	if (rc == MBX_NOT_FINISHED) {
 		rc = 1;
 		goto error;
 	}
-
+	if (rc == MBX_TIMEOUT)
+		goto error;
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		mp = mbox->ctx_buf;
 	else
@@ -7361,7 +7361,10 @@  int lpfc_get_sfp_info_wait(struct lpfc_hba *phba,
 		mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys);
 	}
 
-	rc = lpfc_sli_issue_mbox_wait(phba, mbox, 30);
+	rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_SLI4_CONFIG_TMO);
+
+	if (rc == MBX_TIMEOUT)
+		goto error;
 	if (bf_get(lpfc_mqe_status, &mbox->u.mqe)) {
 		rc = 1;
 		goto error;
@@ -7372,8 +7375,10 @@  int lpfc_get_sfp_info_wait(struct lpfc_hba *phba,
 			     DMP_SFF_PAGE_A2_SIZE);
 
 error:
-	mbox->ctx_buf = mpsave;
-	lpfc_mbox_rsrc_cleanup(phba, mbox, MBOX_THD_UNLOCKED);
+	if (mbox->mbox_flag & LPFC_MBX_WAKE) {
+		mbox->ctx_buf = mpsave;
+		lpfc_mbox_rsrc_cleanup(phba, mbox, MBOX_THD_UNLOCKED);
+	}
 
 	return rc;